Windows 7 and jdk1.6.0_14

I have a project that i am working on. I can compile and run fine on my laptop(where I am working on the project) which used vista. But when I compile and run on my desktop, which used windows 7, I get exceptions thrown that arent thrown. They both have the same JRE installed.
Should I expect this issue from computer to computer? Or is this maybe a Windows 7 thing?
These are just my first questions before I do an overhaul on how I am catching my exceptions.

ChuckBing wrote:
I wonder what "This release is Windows 7 support-ready..." means?Most likely it means that they think it works (or it should work according to MS documentation), but they can't be sure, since there is no final version of Windows 7.
The [JavaTM SE 6 Release Notes Supported System Configurations|http://java.sun.com/javase/6/webnotes/install/system-configurations.html] doesn't list Windows 7.
Probably because there is no official release of Windows 7, so they can't test and therefore can't support Windows 7.

Similar Messages

  • C:\Documents and Settings\User "c:/Program Files/Java/jdk1.5.0_14\bin\java.

    I have a class "Stimulus.java" in which another jar's class has been used. When I created jar and executed I got below error. I used "-classpath" to set dependancy jar file. Any clues are appreciated.
    import modulus.Modulus;
    public class Stimulus{
        public static void main(String[] args) {
                Model.main(args);
    C:\Documents and Settings\User>"c:/Program Files/Java/jdk1.5.0_14\bin\java.exe" -classpath "D:\User\mypgms\test\bin\Modulus.jar;" -jar D:\User\mypgms\test\bin\Stimulus.jar c:\test.txt
    Exception in thread "main" java.lang.NoClassDefFoundError: modulus/Modulus
            at Stimulus.main(Stimulus.java:4)

    You can't mix classpath values with the -jar option. Using the -jar option causes Java to use only the Class-Path: information in the jar's manifest file, while ignoring all external classpath information. Review this for details:
    http://java.sun.com/docs/books/tutorial/deployment/jar/run.html

  • EJB and Jdk1.5 problem

    We are trying to migrate jdk 1.4 (wl 8.1) to jdk1.5 (wl 9.1), when we complie Java source code and build EJB ( using Ant/build.xml), we got following error and can not proceed any further.
    [java] /home/fipdev/DeltaOne/newproductimport/ejbcgen/com/leh/deltaone/ejb/business/newproductimport/DONewProductImportAccessor_41o8gs_Impl.java:12: cannot access com.leh.deltaone.ejb.business.newproductimport.DONewProductImportAccessorBean
    [java] bad class file: /home/fipdev/DeltaOne/newproductimport/ejbcgen/com/leh/deltaone/ejb/business/newproductimport/DONewProductImportAccessorBean.class
    [java] class file has wrong version 49.0, should be 48.0
    [java] Please remove or make sure it appears in the correct subdirectory of the classpath.
    [java] extends DONewProductImportAccessorBean
    [java] ^
    [java] 1 error
    [java] Exec failed .. exiting
    [java] Java Result: 1
    49.0 means using jdk1.5 and 48.0 means using jdk1.4, we do use jdk 1.5 in our development server and could verify by
    bash-2.03$ java -version
    java version "1.5.0_06"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_06-b05)
    Java HotSpot(TM) Server VM (build 1.5.0_06-b05, mixed mode)
    do you know why?
    Michael Zou

    Much appreciated your reply, I used both Windows and Unix system and Ant to build EJB, both CLASSPATH and PATH are configured to Jdk 1.5 version.
    CLASSPATH=C:\bea\jdk150_06\lib and PATH=C:\bea\jdk150_06\bin, and verify that it is 1.5 not 1.4 version.
    C:\Eclipse_WorkSpace\DeltaOne\ant>java -version
    java version "1.5.0_16"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_16-b02)
    Java HotSpot(TM) Client VM (build 1.5.0_16-b02, mixed mode, sharing)
    but still getting error, any an idea? thank you again.
    Michael

  • String.getBytes (java) o/p different in Windows and Unix

    Hi,
    I was trying out the following code, which gives me a byte array from a
    String object.
    byte[] bytArr = null;
    bytArr = <String object>.getBytes("UnicodeBigUnmarked");
    System.out.println(bytArr.toString());
    The output is different in Windows and in Unix. The assumed that the reason could be because Intel architecture is based on little_endian so the difference in output. I changed the code to the following
    bytArr = <String object>.getBytes("ISO8859_1");
    and then ran the class file by using "java -Dfile.encoding=ISO8859_1" so that the toString can also take the character encoding of ISO8859_1 rather than using the platform dependent one. Still the result is different in Windows and Unix.
    What could be the reason for this? How can I correct this ? Any help in this regard is welcome.
    cheers
    kk

    Hi Sabre150,
    Thanks for the suggestion, it worked. Both the o/p shows the same if I use System.out.println(Arrays.toString(bytArr));
    I am assigning full points to you. Thanks a ton for the help.
    To end with I have one more question, the method Arrays.toString is introduced from jdk1.5, so if I want to use jdk 1.4 what should I use instead of Arrays.toString ?
    It would be great if I can get this answer.
    cheers
    kk

  • Cannot start Weblogic 10.3 using JRockit-R27.5.0-jdk1.5.0_14

    I'm having problems starting Weblogic Administration server. My setup is Oracle Enterprise Linux 5.0 64-bit on AMD platform. I've installed Weblogic 10.3 64bit and JRockit-R27.5.0-jdk1.5.0_14. When trying to start Weblogic within my domain by typing "./startWebLogic.sh" I get the following error:
    JAVA Memory arguments: -Xms256m -Xmx512m
    WLS Start Mode=Production
    CLASSPATH=:/opt/bfapps/bea/patch_wls1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/bfapps/bea/patch_cie660/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/bfapps/bea/jrockit-R27.5.0-jdk1.5.0_14/lib/tools.jar:/opt/bfapps/bea/wlserver_10.3/server/lib/weblogic_sp.jar:/opt/bfapps/bea/wlserver_10.3/server/lib/weblogic.jar:/opt/bfapps/bea/modules/features/weblogic.server.modules_10.3.0.0.jar:/opt/bfapps/bea/wlserver_10.3/server/lib/webservices.jar:/opt/bfapps/bea/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/opt/bfapps/bea/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar::/opt/bfapps/bea/wlserver_10.3/common/eval/pointbase/lib/pbclient57.jar:/opt/bfapps/bea/wlserver_10.3/server/lib/xqrl.jar::
    PATH=/opt/bfapps/bea/wlserver_10.3/server/bin:/opt/bfapps/bea/modules/org.apache.ant_1.6.5/bin:/opt/bfapps/bea/jrockit-R27.5.0-jdk1.5.0_14/jre/bin:/opt/bfapps/bea/jrockit-R27.5.0-jdk1.5.0_14/bin:/opt/bfapps/bea/jrockit-R27.5.0-jdk1.5.0_14/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/NX/bin:/usr/NX/bin:/home/jeff/bin:/usr/NX/bin:/usr/NX/bin
    * To start WebLogic Server, use a username and *
    * password assigned to an admin-level user. For *
    * server administration, use the WebLogic Server *
    * console at http://hostname:port/console *
    starting weblogic with Java version:
    java version "1.5.0_14"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_14-b03)
    BEA JRockit(R) (build R27.5.0-110_o-99226-1.5.0_14-20080528-1505-linux-x86_64, compiled mode)
    Starting WLS with line:
    /opt/bfapps/bea/jrockit-R27.5.0-jdk1.5.0_14/bin/java -jrockit -Xms256m -Xmx512m -da -Dplatform.home=/opt/bfapps/bea/wlserver_10.3 -Dwls.home=/opt/bfapps/bea/wlserver_10.3/server -Dweblogic.home=/opt/bfapps/bea/wlserver_10.3/server -Dweblogic.management.discover=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/opt/bfapps/bea/patch_wls1030/profiles/default/sysext_manifest_classpath:/opt/bfapps/bea/patch_cie660/profiles/default/sysext_manifest_classpath -Dweblogic.Name=Admin -Djava.security.policy=/opt/bfapps/bea/wlserver_10.3/server/lib/weblogic.policy weblogic.Server
    <Jul 22, 2009 4:40:59 PM EDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.5.0-110_o-99226-1.5.0_14-20080528-1505-linux-x86_64 from BEA Systems, Inc.>
    <Jul 22, 2009 4:41:00 PM EDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: java.lang.UnsupportedClassVersionError: weblogic/jdbc/common/internal/ConnectionPool : unsupported classversion 50.0
    java.lang.UnsupportedClassVersionError: weblogic/jdbc/common/internal/ConnectionPool : unsupported classversion 50.0
    at java.lang.ClassLoader.defineClass1(Native Method)
    at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
    at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
    at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
    at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
    at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:164)
    at weblogic.kernel.FinalThreadLocalList.initialize(FinalThreadLocalList.java:44)
    at weblogic.t3.srvr.PreConfigBootService.start(PreConfigBootService.java:70)
    at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:459)
    at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:164)
    at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:712)
    at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:486)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:440)
    at weblogic.Server.main(Server.java:67)
    >
    <Jul 22, 2009 4:41:00 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
    <Jul 22, 2009 4:41:00 PM EDT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
    <Jul 22, 2009 4:41:00 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
    I'm assuming I do not have my environment setup properly. Any ideas?
    Thanks,
    Jeff

    WLS 10.3 and above require Java 1.6, and certain versions. It's recommend that you use one of the JVM's installed with the product. For 10.3, I think that is jdk160_05.

  • Open discoverer report in new browser window and without connections page

    Hi All,
    We are using Oracle 11g Discoverer 11.1.1.4.  Requirement is to open the discoverer report in a new browser window and without connections page.
    When we are running discoverer reports with this parameters we unwantedly get the connections page of the discoverer plus which we don't want.
    Went through the documentation given in this page and followed it still the issue persists, and i see couple of threads with my issue and no updates.
    This excerpt is from the documentation available in the link
    " _plus_popup=true and framedisplaystyle=embedded launches Discoverer Plus in a new pop-up browser window that contains the Plus applet embedded in it "
    http://www.art2dec.com/documentation/docs/oas10g1012/linux/bi.1012/b13918/urlstart.htm
    and Here is what we use to invoke our reports.
    http://ipaddress:port/discoverer/plus?cn=cf_123&_plus_popup=TRUE&framedisplaystyle=EMBEDDED&wb=disc_wb_1
    Request the forum users from PRO discoverer group to help me out of this issue and expect a good discussion on this.
    Thanks in advance

    Closing the thread
    We were able to achieve by changing the browser settings in the IE 8 Browser. Disabled Tabbed browsing.

  • New ipod seen in windows and itunes but not in sync diagnostics

    I bought a second Ipod. Oldest one works fine. New one is seen in Windows and in ITunes. Diagnostics "finds" new Ipod, but on Sync diagnostics says "no Ipod found".
    Ne Ipod looks like it's staring to sync, then just stops after 30 seconds and goes to "connected" screen.
    Have done resets of Ipod and reboots of PC.
    Driver shows no error in Device Manager.
    Have tried three differenct cables and both USB ports on the pc.

    I jus tried that. Computer acknowledged Ipod and Itunes performed restore. Afterward, same situation...no sync. Screenshots:

  • I wonder to know what is the enterprise solution for windows and application event log management and analyzer

    Hi
    I wonder to know what is the enterprise solution for windows and application event log management and analyzer.
    I have recently research and find two application that seems to be profession ,1-manageengine eventlog analyzer, 2- Solarwinds LEM(Solarwind Log & Event Manager).
    I Want to know the point of view of Microsoft expert and give me their experience and solutions.
    thanks in advance.

    Consider MS System Center 2012.
    Rgds

  • Want to use a Lacie External Hard Disk with Windows and Mac? Can I?...

    Hi, I've just purchased a Lacie Extreme D2 external hard disk, I'm looking to use it to move film clips from my Mac G5 to my Sony Vaio laptop. I'll connect the Mac using Firewire 1 and the PC using USB 1.
    I understand there is an issue with setting the compaitibility of the hard disk to either Mac or Windows format but I'm wondering if I can set it to both, so it's possible to transfer these files? The hard disk is Windows and Mac compatible but does it have to be partitioned a certain way?
    Any help is much appreciated.
    Thanks,
    Alex

    Format the drive as FAT or use the Mac format (HFS Extended) and install MacDrive on the PC.

  • Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

    Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

    That issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • How do I install windows and bootcamp on my macbook Air

    Hi
    I need to install Windows and Bootcamp on my macbook Air, due to a software tool a customer needs that only runs on windows.
    The initial instructions say I cannot do this with a remote DvDplayer,
    Who has experienced this?
    Chris

    http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

  • [SOLVE] Dual Boot Windows and ArchLinux with Syslinux

    Ok, i installed ArchLinux on my laptop with Windows XP (syslinux) and I cannot find get Windows to boot or mount it. I have tried to do what i can to do this but cannot. I Installed XP first like a should and something i think might be needed to know is after i created the partitions scheme (10Gb (boot partition), 50GB (XP), 80GB(was unallocated)). The installation disk formated both 2 partitions in NTFS but i installed XP on the second and Windows reported them as C and D drives. Windows being D. Thought that was bit werid thinking Windows installed the mbr on that partition. When I installed ArchLinux, it did have the boot flag set on 10GB (or C drive).
    Since I installed ArchLinux, I have been unable to find a solution to mounting/booting to Windows. Installed NTFS-3G and that didn't work when i tried mount /dev/sda3 windows and i did created a folder named windows but got ...
    mount: wrong fs type, bad option, bad superblock on /dev/sda3,
    missing codepage or helper program, or other error
    In some cases useful info is found in syslog - try
    dmesg | tail or so.
    Tried dmesg | tail and got
    [ 76.524133] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
    [ 179.468499] ACPI: \_SB_.PCI0.LPC0.ACAD: ACPI_NOTIFY_DEVICE_CHECK event: unsupported
    [ 705.472330] 8139too 0000:02:03.0 enp2s3: link down
    [ 717.380879] 8139too 0000:02:03.0 enp2s3: link up, 100Mbps, full-duplex, lpa 0x41E1
    [ 726.447184] 8139too 0000:02:03.0 enp2s3: link down
    [ 727.596128] ACPI: \_SB_.PCI0.LPC0.ACAD: ACPI_NOTIFY_BUS_CHECK event: unsupported
    [ 732.616138] 8139too 0000:02:03.0 enp2s3: link up, 100Mbps, full-duplex, lpa 0x41E1
    [ 733.848832] 8139too 0000:02:03.0 enp2s3: link down
    [ 834.062062] 8139too 0000:02:03.0 enp2s3: link up, 100Mbps, full-duplex, lpa 0x41E1
    [ 2131.449211] perf samples too long (2534 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
    This is when i run sudo lsblk
    NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
    sda 8:0 0 149.1G 0 disk
    |-sda1 8:1 0 9.8G 0 part /boot
    |-sda2 8:2 0 1K 0 part
    |-sda3 8:3 0 53.6G 0 part
    `-sda5 8:5 0 85.7G 0 part /
    sr0 11:0 1 1024M 0 rom
    My syslinux is
    LABEL arch
    MENU LABEL Arch Linux
    LINUX ../vmlinuz-linux
    APPEND root=/dev/sda5 rw
    INITRD ../initramfs-linux.img
    LABEL windows
    MENU LABEL Windows
    COM32 chain.c32
    APPEND hd0 3
    NOTE: chain is in the same directory with syslinux
    I really think Windows got corrupted but not sure. Thought about repairing the mbr on windows and booting to it then reinstall syslinux but really don't want too.
    Thanks in advance
    Last edited by jag-ster (2014-11-27 02:12:12)

    Here is the partition table:
    /dev/sda1 one HUGE linux /boot primary partition (assuming ext4)
    /dev/sda2 "name" of the extended partition
    /dev/sda3 primary Windows partition (assuming NTFS)
    /dev/sda5 logical Linux root partition (assuming ext4)
    /dev/sda1 to /dev/sda4 are either all primary, or three primary and one extended. After /dev/sda4 all partitions are logical. If you're still wondering why is there no /dev/sda4, it's because you have 2 primary and one extended, so /dev/sda4 is reserved for another primary partition.
    Windows problem:
    The /dev/sda1 which Windows named C: is Windows equivalent of linux /boot. When you told linux to place its /boot on /dev/sda1 it formated boot files of Windows. Now you have Windows OS with no kernel. In other words there is no way to boot Windows if you don't reinstall it. Actually there is a way, but you would than screw up Arch.
    Mounting problem:
    You can never mount extended partition, only logical (an extended partition is made of logical partitions). You want to do:
    sudo mount /dev/sda3 -t NTFS-3g -o rw,uid=YourUserName /path/where/you/want/this/partition/mounted
    EDIT:
    Try it this way:
    - Backup all your data
    - Delete every partition
    - Start Windows installation
    - Make only one partition (c:/ for Windows)
    - Let Windows make another partition
    - Make one more so you could have a data partition, which does not need to be formated to reinstall Windows
    - Start Arch installation
    - Get to partitioning
        =Partitioning=
        - /dev/sda4 extended (take the rest of the drive)
        - /dev/sda5 logical /boot 512MiB
        - /dev/sda6 logical /          20GiB
        - /dev/sda7 logical /home (the rest)
    Making a separate /home partition will come in handy when reinstalling Arch (any linux distribution), or switching between distros, because it is the equivalent of D:/ in Windows. Also consider LVM.
    Last edited by bstaletic (2014-02-28 23:25:33)

  • FIREFOX 26 changed the 'post crash' page with the list of windows and pages. It was a real HTML page with links for each page. Now it isn't (and blows)

    * You changed the page that comes up after a crash - the one which shows the windows and pages that were up before the
    crash.
    This used to be a real HTML page and it isn't any more. THis choice was pure isiocy consider how peopel used that page every day (try taking to your users for a change).
    The pages listed on that 'post crash page' used to be actual LINKS (you could right click them &
    manually open them in another tab - and most peope DID that every day). You could also (and I did this a lot) drag a second
    copy of the page, into a new tab (to keep track of all the pages I had not wanted to open)
    Now the pages are no longer links. You cannot right-click them.
    The thing in the probser is no longer a page that I can drag into a new tab.
    Roll the version back and throw this one in the bin...and have a good long talk with your developers about the definition of
    'STUPIDITIY'
    Then I try to type anything in the addres bar it is suppose to repoond with the history of old things I have types in the past, or
    search for what I type (and in some cases I think it tyes to convert it intoa URL). However it no longer does any of these
    things. When I type in the ADDRESS BAR ONLY, I do not get all of my letters to appear. I have to type into a notepad or
    into the search and to copy and paste to go to a URL. Nothing that is typed into the address bad responds normally at all
    anymore, and I am fairly certain there are no new addons on this machine at all. It does not matter which things I disable. It
    still does this. W of course points the finger back at a change to FIREFOX. I wich I could just sitct with one stable release
    forever but the MOZILLA folk thing it is best to force peopel awy from a working broswer release to a horrible one (due to it
    being out of date).
    FIREFOX 26.0 has 'issues' (ie new *features*/bugs)
    1) History is no longer accurate. My Proof? This machine is the primary one for the entire family (the only PC working). It is
    logged in with same user every time and never has its history cleared. It now January 7 so I ought to have a list of all of last
    months browing available to me.
    However, according to FIREFOX history, in all of December 2013, the entire family only went to 51 primary URL's. None of
    the official TV sites I use to get episodes are listed. None of the official movie sites I use are listed. The primary URL for
    ebay is not listed. Only 1 out of our 4 weather sites that I use (at least once a week) are listed. Only 1 of our 3 FINANCE
    sites is listed. There ought to be several; hundred root URLs listed.
    Please fix history as this change seriously "blows greasy chunks"
    PROBLEM (a stupid change in the new FIREFOX version)
    FOr a long time, after a crash you got a useful page (a real HTML page) which gave you a list of all of your last sessions
    'winwos and tabs' that were open when the browser crashed. there were certain ways of using this page that are no longer
    able to be done.
    The old method was wonderful as it had this behavior :
    *** The old method for displaying your 'Recovered Tabs' allowed you to :
    a) right click an individual item and open it in a tab without getting rid of that lovely window of your previous session of
    'recovered windows and tabs '.
    2) drag the URL for the entire window of 'recovered windows and tabs ' to a new tab (to make a second copy) so that you
    could select just a few of them to open as a group, and stil have the old list handy.
    You can no longer do either of these things. The 'recovered windows and tabs ' page no longer has links in it and can no longer be dragged, so you cant select a few of them to use, and keep the rest around for later. NOW - once you choose which pages to open the window is gone forever (can can't get a second copy).
    People used to make a copy of the page for later use (with a drag)
    we also used to open pages with a right click (which no longer functions
    This new method seriously blows big greasy chunks. A parge loss in function has occurred.
    Put things back as they were. 26 is full of terrible changes that NOBODY likes. It also has a lot of bugs (history is not reliable at all)

    (1) Firefox's built-in post-crash page has not been a real HTML page for a long time (for example, from the time of Firefox 22, see: [https://support.mozilla.org/en-US/questions/968212 Want to save LOTS of versions of "Restore Session.xht" from the "oops ..." page for later use]). If you had this working differently with Firefox 25, that might have been created by an extension.
    You can check to see whether extensions are disabled or need an update on the Add-ons page. Either:
    * Ctrl+Shift+a
    * orange Firefox button (or Tools menu) > Add-ons
    In the left column, click Extensions. The disabled extensions cluster toward the bottom of the list. To poll for updates, use the "gear" button above the list and choose Check for Updates.
    If you used the Reset feature (or Firefox automatically did a reset due to some problem during upgrading), you will need to reinstall missing extensions. The reset feature creates a folder on the desktop named Old Firefox Data. Do you have that folder? There may be data you can recover from it.
    (2) There are many ways for history to get cleared, both internal to Firefox and external. Could you double-check your Privacy settings?
    orange Firefox button (or Tools menu) > Options > Privacy
    * The "Firefox will" drop-down says Remember History: Firefox shouldn't be clearing history, but an add-on or external software could do it
    * The "Firefox will" drop-down says Use custom settings for history: inspect the "Clear history when Firefox closes" setting to make Firefox isn't set to clear history. Also check your add-ons and consider external software.
    Firefox normally accumulates months of history. However, some of Firefox's database sizes are based on disk space available. If your hard drive is very full, Firefox might reduce the amount of history stored.

  • By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and is it possible to install it on both Windows and Apple(if it comes with two licenses)? Thank you.

    By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and if it does, is it possible to install on both Windows and Apple's OX? Thanks.

    A Cloud subscription provides for installing working installations on two machines.  You can have mixed operating systems (both Windows and Apple's OX).

  • JDeveloper 3.1 and JDK1.2.2: are they REALLY compliant?

    Hi,
    I've already been developing in JDev 3.0 using Java 1.1.8 for a few months and have a number of EJB's deployed in an Oracle8i 8.1.5 database. These are accessed by a servlet which is called from a C++ application in order to populate the db tables. I'm using Java Webserver 2.0 and everything works fine.
    I've been upgrading to Java 2 with JDev 3.1, Oracle 8i R2, and JDK1.2.2. Everything again works fine when I am testing and debugging in the JDev 3.1 IDE but when I deploy to the Web server, my context lookup for the EJB published name freezes, returns an error status to the C++ app but does not display any error/exception msgs in the server console/log files.
    On investigating I found that the java.exe bundled with JDev 3.1 as the JDK1.2.2 version is actually NOT the java.exe that has been dispatched with the release version of JDK1.2.2! There are however two files in the bin directory of the JDK1.2.2 called oldjava.exe and oldjavaw.exe which correspond to the ones bundled with JDev 3.1?
    Could someone please explain what is going on? As it stands at the moment the version of java.exe with JDK1.2.2 does not work for my EJB's but if I replace it with the oldjava.exe, it works fine. Does this mean that JDev 3.1 is NOT actually JDK1.2.2 compliant or have I done something wrong?
    This is potentially a major problem for our projects so if anyone at Oracle has any info it would be greatly appreciated.
    Cheers
    Dave

    David,
    I changed Sun Java 1.2.2 VM to JDeveloper 3.0 1.1.8 VM and now I get this:
    [Root exception is java.lang.ClassNotFoundException: EJBBibles.BibleSearchHomeHelper]javax.naming.Na
    mingException: Unknown reasons
    at oracle.aurora.jndi.sess_iiop.SessionCtx._activate(SessionCtx.java:82)
    at oracle.aurora.jndi.sess_iiop.SessionCtx.activate(SessionCtx.java:276)
    at oracle.aurora.jndi.sess_iiop.ServiceCtx.lookup(ServiceCtx.java:320)
    at oracle.aurora.jndi.sess_iiop.sess_iiopURLContext.lookup(sess_iiopURLContext.java:215)
    at oracle.aurora.jndi.sess_iiop.sess_iiopURLContext.lookup(sess_iiopURLContext.java:201)
    at javax.naming.InitialContext.lookup(InitialContext.java:288)
    at EJBBiblesServlet.Servlet1.init(Servlet1.java:36)
    at org.apache.tomcat.core.ServletWrapper.initServlet(ServletWrapper.java:315)
    at org.apache.tomcat.core.ServletWrapper.handleRequest(ServletWrapper.java:445)
    at org.apache.tomcat.core.ServletWrapper.handleRequest(ServletWrapper.java:597)
    at org.apache.tomcat.servlets.InvokerServlet.service(InvokerServlet.java:257)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at org.apache.tomcat.core.ServletWrapper.handleRequest(ServletWrapper.java:503)
    at org.apache.tomcat.core.ContextManager.service(ContextManager.java:559)
    at org.apache.tomcat.service.http.HttpConnectionHandler.processConnection(HttpConnectionHand
    ler.java:160)
    at org.apache.tomcat.service.TcpConnectionThread.run(SimpleTcpEndpoint.java:338)
    at java.lang.Thread.run(Thread.java:466)
    If I use JDev 1.2 VM, I get this:
    javax.naming.NotContextException: fumaca:2481:eatg/test/BibleSearchRemote
    java.lang.Object oracle.aurora.jndi.sess_iiop.sess_iiopURLContext.lookup(javax.naming.Name)
    java.lang.Object oracle.aurora.jndi.sess_iiop.sess_iiopURLContext.lookup(java.lang.String)
    java.lang.Object javax.naming.InitialContext.lookup(java.lang.String)
    void EJBBiblesServlet.Servlet1.init(javax.servlet.ServletConfig)
    void org.apache.tomcat.core.ServletWrapper.initServlet()
    void org.apache.tomcat.core.ServletWrapper.handleRequest(org.apache.tomcat.core.Request, org
    .apache.tomcat.core.Response)
    void org.apache.tomcat.core.ServletWrapper.handleRequest(org.apache.tomcat.core.HttpServletR
    equestFacade, org.apache.tomcat.core.HttpServletResponseFacade)
    void org.apache.tomcat.servlets.InvokerServlet.service(javax.servlet.http.HttpServletRequest
    , javax.servlet.http.HttpServletResponse)
    void javax.servlet.http.HttpServlet.service(javax.servlet.ServletRequest, javax.servlet.Serv
    letResponse)
    void org.apache.tomcat.core.ServletWrapper.handleRequest(org.apache.tomcat.core.Request, org
    .apache.tomcat.core.Response)
    void org.apache.tomcat.core.ContextManager.service(org.apache.tomcat.core.Request, org.apach
    e.tomcat.core.Response)
    void org.apache.tomcat.service.http.HttpConnectionHandler.processConnection(org.apache.tomca
    t.service.TcpConnection, java.lang.Object[])
    void org.apache.tomcat.service.TcpConnectionThread.run()
    void java.lang.Thread.run()
    Which means that there is a difference relative to the VM version.
    All the names are correct on 8i deployment. And all necessary files are on classpath, (including the EJB source and generated jars, that are also in the /lib on the context dochome).
    Any thoughts?
    Thanks,
    Eduardo
    null

Maybe you are looking for