Windows 7 and LaserJet 1022nw via ad-hoc

I am trying to establish a connection between my laptop and the 1022nw via ad-hoc and I am not having much luck. The install cd that came with the printer is no help. I was able to set up the printer using an existing wireless network in infrastructure mode but this will not work as I am hardwired to the company lan and do not want to have to toggle between networks just to print. I am running windows 7 pro, anyone had any luck connecting to the "hpsetup" via ad-hoc?? Any help would be greatly appriciated.

When the printer list comes up click on the "Windows Update" box in the lower right.  This will update the list of drivers available and will likely take several minutes.  Once the update has been done the available drivers will show up.
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • Activate Windows and Microsoft office with GPO

    Dear 
    I Have Domain controller and clients connected to this domain also I have VDI connected to domain so I want to make windows and office activation Via GPO if it is possible so is there any solution for that
    Best regards 
    Rawa Zangana

    Hi Rawa,
    >>so I want to make windows and office activation Via GPO if it is possible so is there any solution for that
    As far as I know, Group Policy can’t help us activate software. To do this, we can resort to KMS or MAK for volume activation.
    Regarding KMS and MAK, the following blog can be referred to for more information.
    Volume Activation
    http://blogs.technet.com/b/office2010/archive/2009/08/24/volume-activation.aspx
    >>did I need to install volume activation Service on my domain controller
    Regarding this point, I agree with Manjunath. This can reduce the workload of DC.
    TechNet Subscriber Support
    If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
    Best regards,
    Frank Shen

  • I tried connecting my Ipod Touch 5th generation to the internet via ad-hoc from my windows 7 laptop. My iPod was connected to the internet but just in a moment. Then it disconnects. would someone help me?

    I tried connecting my Ipod Touch 5th generation to the internet via ad-hoc from my windows 7 laptop. My iPod was connected to the internet but just in a moment. Then it disconnects. I tried so many other option such as creating another ad-hoc from other  laptop but still the same result. Is there something wrong with my iPod? this is so frustrating. I've been using ipod touch 4th gen before I got the 5th and connecting to the internet via ad-hoc was never a problem for me.  Would someone help me? 

    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • I have a macbook pro 13" early 2011 version and what to install windows 7 on it via bootcamp but not sure that whether to install x64 or x86 version? which one will work better

    i have a macbook pro 13" early 2011 version and what to install windows 7 on it via bootcamp but not sure that whether to install x64 or x86 version? which one will work better

    There is no need for anyone to use 32-bit version anymore.
    Retail comes with both. Or you can save on just buying 64-bit System Builder disc.
    Better support for today's hardware with larger video graphic memory and systems.
    Better memory management.

  • For printer LaserJet Profession​al CM1410 any chance to set printing password for windows and MAC

    Dear All
    for printer  LaserJet Professional CM1410 any chance to set printing password for windows and MAC?please help?

    What Windows OS are you using?  Are you networked?
    If you are networked, you have to setup your file and print sharing options in order to require password assess.  If you are just trying to control specific files from being printed, you can do that, too.
    If you are just trying to control the amount of printing off of a single PC with a printer, you could setup different accounts for each user and limit their access. 
    Some of the commercial printers can have password options, but I do not find any password options for the CM 1410, other than what I provided earlier.
    If I have been helpful, a Kudo is always appreciated.

  • Starting and stopping applications via a Java-application on Windows/Unix

    Hello,
    I want to start java and other applications via a java application.
    This java application should start several different applications on windows and
    on unix systems and take care of their current state (e.g. running/not running).
    For all applications to be started there are .sh-scripts for unix and .bat-scripts
    for windows. In the scripts there could be a java call, e.g. "java someApplication",
    or some executables could be called. These scripts set the applications' environment etc.
    and start the application finally.
    My java application calls these scripts via the ProcessBuilder API, which is working fine.
    But there is the following problem: on windows, when executing a script that starts
    some other application, the ProcessBuilder gives me process-handle to the started
    process. If calling destroy() on this handle, only the cmd.exe gets killed which
    started the application. The application itself is running on. This is undesired behaviour
    since I want to be able to control the started applications, at least start and stop it which
    is impossible that way.
    On unix, it is working when using
    "exec java someApplication"
    instead of just
    "java someApplication"
    in the .sh-scripts. The exec command substitutes the shell process with the underlying
    process started in the script, so everything is working as expected on unix.
    But how could I get this working on windows systems? Is there any equivalent to the exec
    command on unix? Any suggestions appreciated.
    If something's unclear in my description, please let me know.

    Yes - after looking at this option - I think that's the direction I am going to go. It probably makes sense to give my JMS topics and my BPEL server their own OC4J instances anyway - for a number of reasons.
    Lon

  • Drivers for hp photosmart d5360 and laserjet 4000 in windows 7,needed

    i need the drivers for  hp photosmart d5360 and laserjet 4000  in windows 7
    i have install windows 7 ver 7260 and everything was working fine,,then i have updated to ver 7600
    and now my computer does not want to install the drivers,,
    any ideas why is not working?
    thanks

    It does not matter how we got Windows 7 RTM (7600). But if you have to know to answer the questions about drivers, then MSDN Subscribers and Technet Subscribers can download Windows 7 RTM as of August 7. I also have Windows 7 RTM and I now cannot install the HP Laserjet 4000N printer. It used to work with Windows 7 RC but now not with RTM. My printer is located on a Windows Server 2008 based computer. It properly browses and I I can select it from the server list of printers. But it then tells me that I dont have a driver. Where can we get a driver? HP will have the Windows 7 RTM version as well for their driver support.

  • How can i install a windows version 8 on a 3 year old iMac 27 (only windows and nothing else not via bootcamp = result shut be a clean iMac with windows - no

    When i now had recieve a brand new 27" imac, i had a 3 year old model 27" imac which my daugter want to have BUT i should be as a clean Windows thing -
    so how to change the computer to a clean windows 8 computer with no apple programs in and no Maverick or other lovely programs?
    I had seen on the net that a lot of peoble had windows with bootcamp - i am not a computer tecnician and when i try - i end op with a machine with could nothing - no mac programs - no office pack - no adobe programs - so i had to start op again with a new harddisk.
    Some of the problem is that i dont understand the thing which bin told when you go to bootcamp for a user of mac's since the model was the "classic" and we make newspapers on them - so i want and easy way to have and mac computer for my self (the new one) and let my daugter have a beutiful imac with windows on.
    dont begin talking about parrelles i had try that, results it had a windows 7 which cant be updated, apple dont support that and microsoft doesnt  so - help me
    regards
    Chevron B50

    If you don't want Boot Camp and you don't want a virtual machine, go buy a Windows computer.
    Both Boot Camped Windows and Windows running in a virtual machine work well. Your issues are because of your lack of knowledge or understanding, not because Boot Camp and virtual machines are poor products. Universities, large and small businesses, home users, etc. use virtual machines to run their operating systems.
    Your statements about Boot Camp and Parallels are not the experience of thousands of users.
    Either find someone who is knowledgeable about running Windows on Apple computers to help you or buy a Windows computer. Believe me, if you find a way to install only Windows on your Apple computer without using Boot Camp or a virtual machine you will have more problems than what you have already experienced.

  • Gaming issues and heat issues, running windows 8.1 pro via bootcamp

    I have a few problems, and I don't know what else to do, then to write for help here..
    I really hope someone out there can help me, because I have had this problem since I bought my laptop mid 2012, and I got smarter since then, so now I know that I actually shouldn't have these problems, it's not because my very expensive laptop is bad, or that it is a laptop or because it's a mac, regardless of what people say, I'm positively certain that it's a problem which shouldn't be there.
    I have pretty great specs, (trust me i checked them out, not the best in the world, but pretty good) yet I can't enjoy 1 single mmorpg game like, Tera, or the new Archeage (currently in open beta), or any other game, (swordsman online)... Even though people say Tera has bad coding, I have tried adjusting things for weeks if not months, NOTHING helps, i get a frame rate that is from 0-25 very unstable, usually around 7-12, and sure if I go the lowest settings in the games I can get very unstable framerates but i guess they can get up to around 35-72 but drops to like 7 or 3 sometimes as well, so even on the LOWEST settings in the games I can't enjoy the games fully... It lags and such because of the low fps ofc...
    Other than that it also have a heat issue, mostly when running windows 8.1 in bootcamp.
    It get's quite hot, just by opening a browser window, and yes i have tried reseting smc, and p-rams, many times.. nothing seems to help.
    And even if it helped the heat problem, the gaming problem is still there.
    Now to my specs: (I have the macbook pro retina, mid 2012, 15 inch)
    - Prosseser: 2.6GHz quad-core Intel Core i7 processor (Turbo Boost up to 3.6GHz) with 6MB shared L3 cache. "Core i7" processor (3720QM)
    - Memory: 16GB 1600MHz DDR3L onboard memory
    - Storage: 256GB ssd flash storage. (Seperated into os x = 130GB, windows 8.1 pro = 120GB) Running games and such from my 1TB external harddisk.
    - Graphics and video support:
    Intel HD Graphics 4000
    NVIDIA GeForce GT 650M with 1GB of GDDR5 memory and automatic graphics switching
    Dual display and video mirroring: Simultaneously supports full native resolution on the built-in display and up to 2560 by 1600 pixels on up to two external displays, at millions of colors.
    And here's a link to see what is inside it for yourself: http://http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core- i7-2.6-15-mid-2012-retina-display-specs.html
    When that is said, apple's warranty has run out, and I didn't buy apple care, but I still have warranty from the store (humac) I bought it in, because in my country the law is warranty 2 years, no matter what, but if i can avoid it, I REALLY would like to avoid switching it out with a new one, since there could be problems all over again, and I would lose what I have on it right now, plus it's a hassle to get a new one, they will always try and fix it for a long long time before they give a new one, and probably can't find the problem...
    But if that's the only thing i can do about it, I will ofc, but just don't advise me to do that, unless there's no other solution to the problems.
    Please help me.
    ps: sorry if I posted it the wrong place, I wasn't allowed to post it the right place by apple...

    If the underlying hardware was exposed correctly by the CSM-BIOS when Windows was installed, your Device Manager should look like this.
    If the Windows installer did not see any devices as your screen indicates, Windows will use generic software-based drivers which will be very slow and painful.
    Rudegar ... I think the Windows installer did not see  any hardware, otherwise there should be HW with yellow triangles with exclamation marks.

  • Hp LaserJet 1022NW on wired netvork go to sleep

    My god old LaserJet 1022NW is givning me some problems,  its in a working wired network, and i can print in about 5 minutes after start. but after that time, the printer is not responding.  Then i can´t see it by browser and ip.  my computer says its online, but i can´t printe.    
    I have tryed a lot of setting  and now back ind factory mode.
    Hope somone can help me !!!
    Thanks
    Flemming Jahns

    Hi @Jahns ,
    I see that you are experiencing issues with the printer printing over the wired network. I would like to help you out today.
    I would power cycle everything.
    Turn the printer and computer off.
    Disconnect the power cable on the router for 10 seconds, then reconnect the power cable again.
    Turn the computer on, then the printer.
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
    Print the Configuration page to see if the printer has a valid IPv4 address.
    Printing a Configuration Report.
    Check the port showing on the computer, to make sure it matches.
    From Devices and Printers, right click the printer and left click Printer Properties, select the Ports tab.
    Click on configure port to view the IP address.
    If the IP address doesn't match then create a new port with the new IP address.
    Close the configure port window.
    Click Add Port, select Standard TCP/IP Port, then select New Port and follow the wizard.
    Type in the proper IP address for the printer.
    Make sure the printer is online.
    Test the printer.
    Then setup a Static IP address for the printer to see if that will help.
    Printer Does Not Maintain Wireless Connection. Please disregard the title.
    Select Solution four: Assign your printer a static IP address under the Windows link.
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • AutoCAD 2009 crashes when printing with HP Laserjet CP1525nw via wireless connection

    Printing to CP1525nw via wireless connection crashes AutoCAD 2009 on a WIndows 7 Home OS + Sony VAIO VPCL21M1E
    Works fine printing from any other application.

    I'm facing the same problem but, i'm AutoCAD 2012 and it crashes when printing with HP Laserjet CP1525n via USB or network cable

  • HP Laserjet 1022nw running with Win7 64 computer printing multiple copies - won't stop

     HP Laserjet 1022nw running with Win7 64 computer printing multiple copies - won't stop until you shut off.  It resumes printing when you turn the 1022nw  back on
    Have renistalled Driver
    It worked fine with Vista and XP

    Hello @Astronav,
    Welcome to the HP Support Forums!
    I would like to assist you today with resolving the issue of  multiple pages continuously printing from your Windows 7 computer to your HP LaserJet 1022nw Printer. However, in order for me to provide you with accurate support I do need to know how your printer is connected to your Windows 7 computer.
    Normally the continuous printing issues are caused by your router. When you send the print command to your printer from your computer than the print command goes from your computer to your router and finally to the printer. If there is a conflict with your router it may constantly send the signal to the printer to 'print' a job. Or, if the printed text is garbled information and weird symbols that your printer is printing it could be commands from the router to your computer that are improperly being sent to your printer and resulting in a page of weird symbols printing.
    Therefore, it is very important for me to know how your printer is connected to your computer as that will guide us in the what direction we need to be troubleshooting.
    Once I find out how your printer is connected to your computer I will be able to provide you with step-by-step instructions on how to resolve this continuous print issue. I look forward to hearing from you!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • Jabber for Windows and Iphone

    We are running Jabber on cucm 9.1 WE use microsoft RDS and all works fine locally. users can sign in with their AD account and see their presence, use their deskphone and receive email. that works on both the windows and Iphone clients.
    When they are logging in via a anyconnect VPN however. the im and presence shows no status for anyone, even though they are logged in but the phone and vociemail is fine, calls can be made and received. The ASA is not blocking anything so not sure where to start with this one

    I just did a full deployment for jabber 4 windows iphone, ipad and android and to get my presence status working as well as photos shown and directory searches I had to make use of the BDI config in my jabber-config.xml file on the cucm as well as the UC services on the cucm and mine is working 100%.
    That is all why I am asking.

  • Having multiple tabs open in one window, and then opening a new window and closing it, will close the newly opened window, but it will want to close the other original window with the multiple tabs as well.

    This only happens if the original window has multiple tabs, and the new window has only ONE tab at the moment you close it.
    Also, the problem only occurs when TWO windows of firefox are open. So opening up a 3rd window, and then closing it, will not give you any problems. The interaction occurs between two windows of firefox only.

    This can happen if you drag a tab slightly down in the browser window while clicking.
    Firefox has a feature called tear-off tabs
    You can detach a tab from the current window and open it in a new window by dragging a tab in the browser window.
    You can also do this via the right-click context menu of a tab: Move to New Window
    You can drag that tab back to the tab bar in the original window to undo that detaching.
    * https://addons.mozilla.org/firefox/addon/bug489729-disable-detach-and-t

  • When I have 4 or 5 tabs open, selecting one of them often forces that tab to open as a new window and close in the original window

    FF 32.0.1. Moving between tabs that are already open, clicking on one which I have opened before forces it to close and open as a new window, which is a real pain. It seems to happen when I have 4 or 5 open tabs, rather than 2 or 3.
    This has only been happening in the last week, after a clean Windows reinstall.
    I've searched and found lots of people have problems with new windows opening when they just want a new tab, but this seems to be about opening fresh tabs rather than returning to one that's already open, so I can't find the same problem as I describe.

    This can happen if you drag a tab slightly down in the browser window while clicking.
    Firefox has a feature called tear-off tabs
    You can detach a tab from the current window and open it in a new window by dragging a tab in the browser window.
    You can also do this via the right-click context menu of a tab: Move to New Window
    You can drag that tab back to the tab bar in the original window to undo that detaching.
    * https://addons.mozilla.org/firefox/addon/bug489729-disable-detach-and-t

Maybe you are looking for