Windows 7 and loading CS2

Just bought a new HP with Windows 7.  I can't seem to get Photoshop CS2 to load.  I put in the disk & the only thing I get is a box with the Adobe logo.  Nothing else happens.  I've tried several times.  Does anyone have a suggestion?
Thank you,
Rose

Go to my computer and look for the DVD drive letter and verify that you can see the disk there. Then right click on the DVD drive, choose explore, then you want to look for the .exe file (you may have to open a folder? can't remember). when you find the .exe file you want to right click on it and choose run as administrator. Ensure you are hooked up to the internet and also turn off any anti-virus software.
Make sure, after the install, that before you run the software itself, to right click on the CS2 .exe and run that as administrator. Also don't forget to update the software and ensure you video card drivers are up to date too.

Similar Messages

  • Locking exceptions for Pop-windows and loading image automatically Preferences setting

    How can i lock the two exceptions button for POP-up windows and load imagae automatically option.

    You can lock the image exceptions via pref.advanced.images.disable_button.view_image
    I do not see a pref to lock the pop-up exceptions on the about:config page (filter: disable_button)
    A possibility is to hide that button via code in userChrome.css (#popupPolicyButton {display:none!important;}), but that needs to be done for each profile.
    <pre><nowiki>//
    lockPref("pref.advanced.images.disable_button.view_image", true);
    </nowiki></pre>
    See also:
    * http://kb.mozillazine.org/Locking_preferences

  • How to Pop-up new Window and load PDF at same time

    Hi
    In my servlet application, when I receive request, I have to load PDF form and at same time I have to pop up new browser window with html content ( help data).
    I thought of writing <script>window.open(....)</script> to outputstream before writing FDFdocument , but it fails.
    I am using FDF tool kit to load PDF forms, once I set content type to "application/vnd.fdf" , I can't write any javascript to response.
    Any help /ideas to do this is appreciated.
    Thanks,
    Prakash

    Hi Prakash,
    Here is the way to solve this issue:
    Make use of HTML frame, one frame (maybe with 0 height and width) pop up with a new HTML browser using javascript. Set the content type and display the pdf in another frame.
    Note that one page can only set content type once, so if u have set it to application/vnd.fdf, you cannot write HTML content into same response stream.
    -ms

  • Install PeopleTools 8.53 with Linux Issue: Client Windows and Server Linux

    Folks,
    Hello. I am installing PeopleTools 8.53 Internet Architecture. Database Server is Oracle Dabase 11gR1. OS is Oracle Linux 5. I have installed JDK7, WebLogic 10.3.6, Tuxedo 11gR1 and PeopleTools 8.53 successfully into Oracle Linux 5.
    Now, I am setting up PeopleTools8.53 Database. Because the Install Wizard has problem, I set up PeopleTools 8.53 Database manually using Oracle starter database instance named PT853. We need to run Data Mover script in a Windows Client machine to populate PeopleSoft Database instance in Linux Sever machine.
    Let's assume:
    VM1: Server machine - Oracle Linux 5
    VM2: Client machine - Windows XP 
    Nicolas has this tutorial:
    http://gasparotto.blogspot.com/2008/01/on-peoplesoft-road-peoplesoft-database_10.html
    From step 15 to step 23, Nicolas does not explain how to connect VM2(client) with VM1(server) and load data from VM2 to VM1.
    My questions are:
    First, do we need to install PeopleTools 8.53 Windows version into the Client machine Windows XP while installing PeopleTools 8.53 Linux version in the Server machine Oracle Linux 5 ?
    Second, how to connect VM2 with VM1 and then load data from VM2 to VM1 ?
    Thanks.

    So if I understand correctly, you have already created the oracle instance in the Linux machine. Then there is no need to install the Tools again in the Linux machine unless you want to run data mover at Linux.
    You can just install the tools and oracle client in windows and load the data by running the data mover from windows. Connection happens through Oracle Client using TNS.
    Steps involved are
    1. Creating the database using createdb10.sql or otherwise (you have already done this)
    2. Run utlspace.sql
    3. Run dbowner.sql
    4. Run ptddl.sql - considering that you are just installing a Tools database and not any application database
    5. Run psadmin.sql
    6. Run psroles.sql
    7. Run connect.sql
    Create the data load dms file by using DBSETUP in data mover
    Run the created script and load the data
    This information is available in any peopletools installation doc
    Hope this helps

  • Can't load cs2 on windows 8

    Was running photoshop cs2, got new computer running windows 8, can't load old software and can't afford new upgraded software, any versions I can download for free or CHEAP?

    Just to be clear, what do you mean by; "can't load CS2"?
    What happens? Do you get error messages? Does the media just not read?
    Are you aware of THIS?
    It is pretty much a case-by-case basis, but I do know people running CS2 on Windows 8 under compatability mode. More info would be helpful.
    --OB

  • Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

    Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

    That issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Adobe Reader XI is not working. I have used the cleanup tool and reinstalled it. I try to open a .pdf file in the program the window will open and load all the tabs but I am never able to actually interact with them.

    I am unable to use adobe reader xi. I have tried to use the clean up tool and re install the reader. That doesn't seem to help. I go to open the pdf file in the reader and the window will load but I am not able to do anything past that point. Almost as if the program freezes once loaded I never get a not responding error until I open the task manager on the computer.

    Can you open Reader by itself?  If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].

  • New tabs are not updating the names of the sites they have loaded. When I open a new tab and load a site, the tab simply stays named "New Tab". When I open a link in a new window, it shows "Connecting..." even while its fully loaded.

    New tabs are not updating the names of the sites they have loaded. When I open a new tab and load a site, the tab simply stays named "New Tab". When I open a link in a new window, it shows "Connecting..." even while its fully loaded.

    This issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * [[Troubleshooting extensions and themes]]

  • Using Audition 2.0 on Windows XP platform.  Now have Windows 8.1 on new computer and need to upgrade and load latest version of Audition.  Any suggestions?  Thanks very much.....R

    Using Audition 2.0 on Windows XP platform.  Now have Windows 8.1 on new computer and need to upgrade and load latest version of Audition.  Any suggestions?  Many thanks, R.

    VC6. is rather old, but you can try to convert the VC6 project using the upgrade wizard of VC2012. Depending on the content of the project your code will work more or less without problems, at least it will compile without errors.
    You could also go the 2nd way and create in VC2012 a project type using the wizard that is very similar to your current VC6 projcet (MDI, SDI, Dialog Based, ...). Than you replace the files generated by the wizard with the content of your project. Sometimes
    this way is more successful.
    But at all the automated converting success depends on the code of your VC6 project. I had both, conversions without big problems and also conversions that need a lot changes to run on a current VC version.
    Best regards
    Bordon
    Note: Posted code pieces may not have a good programming style and may not perfect. It is also possible that they do not work in all situations. Code pieces are only indended to explain something particualar.

  • Can I force the bootcamp wizard to skip looking for the bootcamp drivers?  I have already downloaded the latest drivers and loaded them on a FAT usb drive.  All I want is for bootcamp to create the partition and allow me to install windows 8 pro

    Hi Everyone,
    Can I force the bootcamp wizard to skip looking for the bootcamp drivers?  I have already downloaded the latest drivers and loaded them on a FAT usb drive.  All I want is for bootcamp to create the partition and allow me to install windows 8 pro.
    The bootcamp drivers have been downloaded from apple's website.  Filename:  BootCamp5.0.5033
    I have a iMac 27" late 2013 model.
    NOTE:  I have downloaded the drivers manually from apples support site as the bootcamp wizard fails third of the way through the download.
    Appreciate any assistance.
    Regards,
    asdutoit

    There is a missing point in this thread, and it is that the Boot Camp drivers for the Late 2013 iMac can only be downloaded from Boot Camp Assistant. The Boot Camp drivers available in the Apple site are not compatible with that iMac.
    Delete the Boot Camp drivers from the USB drive, open Boot Camp Assistant and try to download the Boot Camp drivers again. If you get a message telling you that they could not be downloaded, I would try reinstalling OS X through OS X Recovery, by holding down Command and R keys while your Mac is starting up

  • Loading one JComponet Window then closing and Loading a different Window

    Hello and how is everyone. I believe there is two ways I cam make this Java desktop application work, but I am not sure which is the best or doable. I have right now a Component tab window that pops up ask a user to select an option. Then they hit a next button. From here I want to close the JTabbed window the user was just in and open up another one that was based of off the selection. Is this doable
    The other idea I had was have one Component tab window and set visible and invisible Tabs based on user's choices. Is this possible too? Thanks

    You can add a "control-class" to your project. In basic it only opens your start dialog and is used as actionlistener for your "Next" buttons. This actionlistener loads (according to the action command you set for the buttons) your next window. To close the current window, the best is to make your dialog/window to a actionlistener which hide/close/dispose the "current"-window (don't forget to add it to your button ;) )
    To your other idea, you can change the ContentPane, or you use the Card Layout (I think it was) which holds the tabs you want.

  • Loading scripts - what's the difference between loading into edge via script window and including a script in the html document?

    I have a html page that loading in two edge compositions and an external custom javascript file. The javacsript file includes the bootstrapCallback so I can store references to the loaded compositions and can communicate with them. This seems to work well. The problem have is when I also try and load in a custom plugin javascript files into the edge compositions via the script window inside edge - I don't understand how this works, for example if I load in a custom javascript file into one of the compositions can only that composition use it's funcitionality? Is loading in scripts via edge script window the same as including in html document, I'm confused how the two relate, please help me understand.

    I have a html page that loading in two edge compositions and an external custom javascript file. The javacsript file includes the bootstrapCallback so I can store references to the loaded compositions and can communicate with them. This seems to work well. The problem have is when I also try and load in a custom plugin javascript files into the edge compositions via the script window inside edge - I don't understand how this works, for example if I load in a custom javascript file into one of the compositions can only that composition use it's funcitionality? Is loading in scripts via edge script window the same as including in html document, I'm confused how the two relate, please help me understand.

  • I have a partition on my IMac disk and Windows 7 loaded on one partition.  I tried to open and W7 will not open and cannot repair itself.  Is there a diagnostic/disk repair from Apple that I can try before reloading W7?

    I have a partition on my IMac disk and Windows 7 loaded on one partition.  I tried to open and W7 will not open and cannot repair itself.  Is there a diagnostic/disk repair from Apple that I can try before reloading W7?

    Csound1 What Ive been trying to explain is that I have been running bootcamp, I open the app where the first screen is the introduction, i hit continue, the first time I select "download the latest windows support software fromm Apple" then I return and instead select "Install Windows 7." Then hit continue. The third screen is where I "Create a Partition for Windows" I set Windows to 80 gigs then hit INSTALL. As stated before Bootcamp cannot find the install drivers saying "The installer disc could not be found." My windows software is on a USB drive not a disc, I tried using a virtual disc reader to make it appear that the windows software was running on a disc, still no luck. What I would like to know is how to install windows on bootcamp.

  • Finding the explanation of all entries of the Windows Boot Manager and Windows Boot Loader sections

    Hi
    Where can I find the explanation of all entries of the Windows Boot Manager and Windows Boot Loader sections that appear when I write the /store /v options of bcdedit command?
    Thanks
    Bye
    Balubeto

    All the BCEDIT command line options are described here:
    https://technet.microsoft.com/en-us/library/cc709667%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
    Jerry
    Actually, I wanted to find the explanation of all entries (as inherit or
    device or osdevice) of the Windows Boot Manager and Windows Boot Loader sections
    that appear when I write the /store /v options of bcdedit command?
    Thanks
    Bye
    Balubeto

  • My satellite c675-s7200 is stuck on the windows resume loader and nothing happens when I press enter

    How do I get my laptop off of the windows resume loader screen. It's says to hit enter but nothing happens when I do

     
    Satellite C675-S7200
    windows resume loader screen. It's says to hit enter but nothing happens when I do
    The resume loader is probably trying to resume from hibernation by reading the hiberfil.sys file.
    Press and hold the power button to turn off the computer.
    Does the same thing happens when you restart?
    Can you use the F2 key to access the BIOS?

Maybe you are looking for