Windows 7 and Multi-boot

Hallo! Just want to get some quick advice.
I have Windows XP in sda1 with grub install to the MBR on sda.
I just bought sdb and installed Windows 7 in sdb1. Windows 7 overwrote Grub in sda MBR during install.
I chrooted into Arch install and re-installed Grub and added a new entry for Windows 7.
Here's the issue:
When I choose my old Windows XP grub entry it takes me to the Windows selection screen (which I assume is being provided by NTLDR on sda1) that was installed by Windows 7.
When I choose my new Windows 7 grub entry it says no NTLDR found.
Obviously what I want is Win XP entry to boot XP straight away and W7 entry to do likewise.
I figure I need to reset the NTLDR on sda1 to point straight to XP and I need to install NTLDR to sdb1 to boot W7 directly.
Sound about right?

dtw,
yes, thats about it, but in my opinion its easier said then done. I have a similar case, but using it so rarely and only
for testing purposes I just forgot about changing it.
The fact is that the Win7 boot files are on the XP partition.
You can see some opinions about it in: http://tinyurl.com/ykq9tvv
You will find a lot more if you goggle with the words: dual boot xp win 7 remove xp
(my target was to remove XP)
Mektub

Similar Messages

Re: Installing Solaris 11.1 and multi-boot manager

Hi,
I have several problems too (I'm newbie on solaris) installing Solaris in multiboot environment ( I have 3 hard disks on this pc)
Does the grub2 of solaris 11.1 boot linux or not ? if the grub2 of solaris 11.1 can boot linux I think I will install the grub2 of solaris in MBR, I have already triyed this with bootadm install-bootloader -M but there was already a grub2-pc of linux installed and it did'nt
delete the grub2 of linux, so I think I must use bootadm install-bootloader -fM to install the grub2 of solaris
if the grub2 of solaris 11.1 doesn't boot linux I will do as you said with the chainload of solaris (how can I chainload solaris in a recent grub2 ?
in menu entry :
insmod part_msdos
insmod part_sunpc
insmod part_gpt
insmod zfs
set root='(hd2,gpt1)'
chainload +1
(this last point is not important because I have other ways to boot linux and Iprefer to install the grub2 of solaris)
I cannot retrieve my root pool when I boot from the text install CD ROM, zpool import -f rpool doesn't succeed, must I do something after an installation (is it possible to save the root pool on a big usb key ?),(I think I will post another thread for that...)
thanks for your answers
Edited by: stephane_l on May 16, 2013 5:59 AM

Hi,
I have severals problems too installing soalris 11.1 in multiboot environment(3 hard disks on pc)
Can the grub2 of solaris boot linux?
I tried to install the grub2 of solaris after an installation but it doesn't delete the grub2-pc of linux, I think I should have use bootadm install-bootloader -fM to force the instalaltion in MBR
After that (it was my second unsuccessful installation) I have booted with the text install cdrom but the zpool import -f rpool didn't work, must I do something after an installation ? (should I save the root pool after my installation ? can I save the root pool on a big usb key?) I must perhaps post a new thread for this..
thanks for your answers

Problems installing Windows 7 using Boot Camp

I have a brand new MBP Retina laptop (late 2013) with 256GB SSD. Today I tried to use Bootcamp Assistant to partition the SSD and install Windows 7 64 bit OS.
My first attempt was using a licensed Windows 7 64 bit installation DVD and my OWC external optical drive which is recognized in Finder:
I started Boot Camp Assistant, selected the boxes to download latest Windows Support Software from Apple and to Install Windows 7. I was asked to specify the size for the Windows partition and hit continue. The process was moving along, the computer restarted and then I got a black screen with a blinking white cursor (like a command line prompt) in the upper left corner of the screen and a message to press any key to reboot. Pressing any key did nothing.
As far as I could tell, the Support Software files that were on the USB drive did get installed prior to the first reboot of the system that happens after you allocate the size for the partition. After the first reboot I never got the Windows installer though, just the hanging black screen/cursor mentioned above.
I'm wondering if, after creating the partition and restarting, my computer can't see my external optical drive even though it does show up in Finder when booted to OSX because it was not reading the Win7 Install DVD at all.
While on the phone with Apple Senior Tech Support we rebooted several times holding down the Alt/Option key. The boot options were the OSX, Recovery, Windows, and EFI Boot. Choosing Windows resulted in the trackpad locking up and it just hung there. I ended up reverting the SSD back to a single partition for now.
After some discussion on the Apple forum I tried creating an ISO file from the Win7 64 bit DVD using ImgBurn software that I have installed on my Windows PC and ImgBurn indicated it had created a bootable ISO file. I copied the ISO file to the downloads folder on the MBP, plugged the empty USB drive into the MBP and tried Boot Camp Assistant again:
Choosing the appropriate option for use with an ISO file on a USB drive Boot Camp Assistant proceed to again create the partition, asked me to size it, and then it proceeded (over approximately an hour and a half) to work on copying the ISO file to the USB drive and downloaded the Support Software to the USB drive.
After the restart I got another black screen, cursor, and the messages, "No bootable device/drive found", "Press any key to reboot". Again pressing any key did not do anything. I reverted back to a single partition again, rebooted to OSX and gave up for the night.
Bottom line in either scenario is that I never get to the Windows installer screens to even attempt to install Windows on the new partition.
QUESTIONS:
I think in my situation it doesn't appear that ImgBurn created a bootable ISO file from my Win7 install DVD. The Apple Bootcamp Setup guide refers to downloading the ISO image from Microsoft but I couldn't find anything that I would be comfortable downloading.
I'd rather use my installation DVD for Windows but why isn't that process of reading the DVD from the external drive working after the restart?
Can the ISO file and Windows Support Software live on the same USB drive during installation and does the support software get installed automatically by boot camp assistant?
What am I doing wrong here? This shouldn't be this hard especially when I own a valid copy of Windows.
This is VERY frustrating. Any help or referrals to proper instruction is very much appreciated.

I was able to successfully complete the installation of Windows 7 Home Premium using Boot Camp. Turns out the problem was the Windows 7 ISO image I was initially trying to use. I called Microsoft tech support and they sent me a link (see below) from which I downloaded the Windows 7 Home Premium 64 bit ISO image. After downloading the ISO image and restarting Boot Camp Assistant the process of Boot Camp preparing and transferring the ISO image and Windows Support software to the USB drive took about 45 minutes and then everything went smoothly from there. The only thing I encountered was when I was asked what drive to install Windows on I got a message that it couldn't install on the Boot Camp drive because it needed to be in NTFS format. I clicked on the format button and then the process continued. After Windows installed the Windows Support Software from Apple started to install automatically. So far it is working well.
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windo ws-7-home-premium-64bit-iso-download/709dcc12-d120-435d-91cd-52e1dd0f4c24

Unable to install windows 7 on boot camp partition

Hello everyone!
As the title says, I'm trying to install windows 7 on my macbook - the 2009 13 inch model- and failing at it. I have been peeking around the net and I haven't found any solutions, so here I come.
If I'm not wrong I need to format the partition, since boot camp does a FAT32 forma and it won't work for Windows 7. I do that from the windows installer, when it asks me for a driver (no idea which one it's talking about). Then it allows me to choose the partition to install windows but the installation process doesn't seem to work for some reason. I've done it before and I've had similar problems (I just kept trying things untill something worked ) but apparently I couldn't do it now to safe my life.
I hope I've been detailed enough for you to be able to help me. Thanks ^^

It depends of the OS X version you're using. If it's 10.6, insert the Mac OS X DVD and install them.
If it's 10.7 or 10.8:
1. Press X key while your Mac is starting to start into OS X.
2. Open Boot Camp Assistant, download drivers and burn them into a DVD or USB drive.
3. Start into Windows and install Boot Camp drivers

2010 Mac Pro Boot Camp - Refuses to boot Windows after installing Boot Camp drivers

Hey all,
I have a quad 3.2Ghz 2010 Mac Pro with a Radeon 5870 and 8 GB RAM.
I have 2 10000RPM WD Raptor drives, the first drive is my Lion boot drive. The 4th bay contains the second Raptor which has Windows 7 Ultimate 64 bit installed. Bay 2 has Time Machine, bay 3 has a Windows backup drive.
I had first installed Windows and the Boot Camp drivers a few months ago and everything was humming along smoothly. Monday I tried to boot into Windows and it crashed immediately after the black Booting Windows screen started to change to the login window. This happened repeatedly. Nothing changed on the system that I am aware of. Whenever I tried to boot windows again, it booted into the repair mode. That did not seem to work because after running the repair it would still not boot.
So I did what is usually required of Windows, and that was to reinstall. I reformatted the hard drive, ran Boot Camp assistant, and started the install.
Everything was peachy so far, so I tried to reinstall the Boot Camp drivers (4.0). Did a reboot. Same problem. Doh!
So I did ANOTHER reinstall, and everything was fine. But this time I tried to install the Boot Camp drivers off the os install disc that came with my Mac (3.1). Still no go!
So finally I did my third reinstall and after that I did not install Boot Camp drivers. However, I did load up the CD and individually installed drivers for the Apple Mouse, Apple Keyboard, Cinema Display, etc. No problems whatsoever. Everything is actually still humming along fine.
So it looks like running the full Boot Camp install for some reason no longer works. Which means I am missing the Apple Boot Camp control panel, but that's not really a big deal. Althought it's quite annoying to not have the functionality of the special Mac keyboard keys like volume control, etc.
Has anyone run into this? I thought it might be a hardware problem but my Mac OS X OS exhibits no problems whatsoever.
Thanks!

Thank you to The hatter.
I have a Mac Pro mid 2010 with a SSD and several internal hard disks. For some time I was trying to install Windows 7 on a fresh boot camp volume on a new WD 7200rpm 1TB hard disk. It was taking hours to install, and then I had a series of failures to reboot that proved permanent. The Window Repair utility would come up and took forever to repair the volume - but failed to actually do so, requiring completion reinstallation of the bootcamp volume. This occurred three times, between 1 day and 2 months after installation. I had already moved the Windows drive in to drive slot 1 of the Mac Pro.
Eventually I gave up and installed boot camp on a secondary partition of the SSD. This worked fine, however is limited in capacity. So yesterday I thought I would try to install Windows on the hard disk again. The Windows installer took many hours to do its thing, and eventually a message came up that the installation had failed.
I took your tip about possible hard disk failure, and ran Techtool Pro surface scan. It turns out that there are lots of bad blocks being reported. According to Micromat's documentation, the bad blocks being reported are those that may be in critical areas of the disk that cannot be mapped out. They recommend low level reinitialisation (with zeros) to map out the bad blocks, if possible. I am now running Apple's Disk Utility to do this, and fingers crossed that this reinitialisation succeeds, or I will have to replace the drive.

Unable to Install Windows 7 using Boot Camp Assistant

I recently suffered a hard disk failure. After replacing the disk, I have recovered all data with the exception of being unable to install windows 7 on a new boot camp partition. I am able to create the partition using boot camp assistant, but I am subsequently been unable to install windows following the directions provided. Any help would be appreciated. I have a late 2009 27" iMac running OSX Mavericks.

It depends of the OS X version you're using. If it's 10.6, insert the Mac OS X DVD and install them.
If it's 10.7 or 10.8:
1. Press X key while your Mac is starting to start into OS X.
2. Open Boot Camp Assistant, download drivers and burn them into a DVD or USB drive.
3. Start into Windows and install Boot Camp drivers

I just updated to OS X 10.9.2 and My boot camp assistant won't turn on.

I'm trying to install Windows 7 as I did before.
But now, when i double click the boot camp assistant on desktop it gives me the error message window and says "Boot Camp Assistant has quit unexpectedly".
Please help.

When I got the computer, boot camp assistant was on the desktop and I used it to install windows 7 before.
I have never really seen it on my applications folder and right now it isn't in my applications folder either.
Would this be the problem?
I couldn't find out how to re-download the boot camp assistant either...

First single-boot Linux, in the future multi-boot after addition of Windows

The given hardware setup is 32Bits Pentium 4 with blank SATA HDD and BIOS. GPT is in seek on that HDD, not MBR. As next it will be setup to single-boot system with Linux. Means amongst others the disk is to be partitioned.
However it is unclear if Linux will satisfy the user of this system. It will show in middle or long term if the satisfaction is present or not. Therefore the plan B is in setup now as well. It means, should it in the future turn out that user will have Windows
instead of Linux indeed, such a OS will be added to this system - means in no way a replacement - a smooth transition only accepted, a transition which surely need some extent of time. It will be added in the multi-boot fashion, not as VM - due to quite vintage
hardware state. Let's assume in such a case the Windows 8.1 will be taken.
As for current stage of works - means the disk partitioning - which measures of precaution must be met now in order to make such and system extension in the future possible? Just to leave a free space on disk for needs of future Windows installation? Must the
reservation be made in specific disk regions or no matter? Is it necessary for this reason to create now a partition of specific type, with specific properties? Anything else to be considered?
There are lots of articles and howtos in the web regarding multi-boot questions however all they address the reversed situation, first Windows then add other vendor's OS.

Hi,
I agree with BoYans's opinion. MBR style is applied to your computer. If you install Windows after Ubuntu, There are two approaches for you from Ubuntu official website:
One is recovering GRUB after reinstalling Windows.
Another is master Boot Record backup and re-replacement.
For more information and further help, please refer to the official guide and contact Ubuntu support:
WindowsDualBoot
https://help.ubuntu.com/community/WindowsDualBoot
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Karen Hu
TechNet Community Support

Want to upgrade Windows and migrate to a new Boot Camp partition

I'm a dedicated Mac user who must on occasion use Windows at work.
Knowing that it's always best to make changes one step at a time, I'm looking for recommendations before embarking on a multi-step upgrade and migration:
CURRENT SET-UP:
MBP 2009, Core 2 Duo, 3.06 gHz, 8Gb RAM, 500 gb hd
OSX Lion10.7.1
Parallels 7
Windows XP SP2
No Boot Camp Partition
GOALS:
Create a Boot Camp partition and migrate Windows to there
This will allow me to keep all my Windows files in one place and have access to them regardless of whether I boot into Windows natively via Boot Camp or via a virtual device using Parallels
Upgrade to XP to Windows 7 using Windows 7 Pro Upgrade for Vista
I bought this as a pre-release two whole years ago
Hey -- was told then on the MS web site that this path would work...
Use iCloud to sync my Apple stuff with my Windows stuff (Calendar, Contacts)
I currently do this successfully via MobileMe and Outlook Exchange
However, iCloud requires that syncing with Windows requires Vista or newer (so gotta go to Windows 7, 'cuz ain't going Vista)
Migrate all my Windows applications and files without having to do clean installs
I know, clean installs are always better
However, IT support at work is always overloaded, so I choose this route for now
Also, I regularly use Super Duper to back-up (clone) my internal HD -- and have restored a number of times, always successfully -- so that necessary step is well covered.
Any recommendations?
Thanks in advance.

I ended up deleting my WinXP partition and the upgrade to OSX 10.7 went fine.

[SOLVE] Dual Boot Windows and ArchLinux with Syslinux

Ok, i installed ArchLinux on my laptop with Windows XP (syslinux) and I cannot find get Windows to boot or mount it. I have tried to do what i can to do this but cannot. I Installed XP first like a should and something i think might be needed to know is after i created the partitions scheme (10Gb (boot partition), 50GB (XP), 80GB(was unallocated)). The installation disk formated both 2 partitions in NTFS but i installed XP on the second and Windows reported them as C and D drives. Windows being D. Thought that was bit werid thinking Windows installed the mbr on that partition. When I installed ArchLinux, it did have the boot flag set on 10GB (or C drive).
Since I installed ArchLinux, I have been unable to find a solution to mounting/booting to Windows. Installed NTFS-3G and that didn't work when i tried mount /dev/sda3 windows and i did created a folder named windows but got ...
mount: wrong fs type, bad option, bad superblock on /dev/sda3,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so.
Tried dmesg | tail and got
[ 76.524133] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 179.468499] ACPI: \_SB_.PCI0.LPC0.ACAD: ACPI_NOTIFY_DEVICE_CHECK event: unsupported
[ 705.472330] 8139too 0000:02:03.0 enp2s3: link down
[ 717.380879] 8139too 0000:02:03.0 enp2s3: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 726.447184] 8139too 0000:02:03.0 enp2s3: link down
[ 727.596128] ACPI: \_SB_.PCI0.LPC0.ACAD: ACPI_NOTIFY_BUS_CHECK event: unsupported
[ 732.616138] 8139too 0000:02:03.0 enp2s3: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 733.848832] 8139too 0000:02:03.0 enp2s3: link down
[ 834.062062] 8139too 0000:02:03.0 enp2s3: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 2131.449211] perf samples too long (2534 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
This is when i run sudo lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 149.1G 0 disk
|-sda1 8:1 0 9.8G 0 part /boot
|-sda2 8:2 0 1K 0 part
|-sda3 8:3 0 53.6G 0 part
`-sda5 8:5 0 85.7G 0 part /
sr0 11:0 1 1024M 0 rom
My syslinux is
LABEL arch
MENU LABEL Arch Linux
LINUX ../vmlinuz-linux
APPEND root=/dev/sda5 rw
INITRD ../initramfs-linux.img
LABEL windows
MENU LABEL Windows
COM32 chain.c32
APPEND hd0 3
NOTE: chain is in the same directory with syslinux
I really think Windows got corrupted but not sure. Thought about repairing the mbr on windows and booting to it then reinstall syslinux but really don't want too.
Thanks in advance
Last edited by jag-ster (2014-11-27 02:12:12)

Here is the partition table:
/dev/sda1 one HUGE linux /boot primary partition (assuming ext4)
/dev/sda2 "name" of the extended partition
/dev/sda3 primary Windows partition (assuming NTFS)
/dev/sda5 logical Linux root partition (assuming ext4)
/dev/sda1 to /dev/sda4 are either all primary, or three primary and one extended. After /dev/sda4 all partitions are logical. If you're still wondering why is there no /dev/sda4, it's because you have 2 primary and one extended, so /dev/sda4 is reserved for another primary partition.
Windows problem:
The /dev/sda1 which Windows named C: is Windows equivalent of linux /boot. When you told linux to place its /boot on /dev/sda1 it formated boot files of Windows. Now you have Windows OS with no kernel. In other words there is no way to boot Windows if you don't reinstall it. Actually there is a way, but you would than screw up Arch.
Mounting problem:
You can never mount extended partition, only logical (an extended partition is made of logical partitions). You want to do:
sudo mount /dev/sda3 -t NTFS-3g -o rw,uid=YourUserName /path/where/you/want/this/partition/mounted
EDIT:
Try it this way:
- Backup all your data
- Delete every partition
- Start Windows installation
- Make only one partition (c:/ for Windows)
- Let Windows make another partition
- Make one more so you could have a data partition, which does not need to be formated to reinstall Windows
- Start Arch installation
- Get to partitioning
=Partitioning=
- /dev/sda4 extended (take the rest of the drive)
- /dev/sda5 logical /boot 512MiB
- /dev/sda6 logical / 20GiB
- /dev/sda7 logical /home (the rest)
Making a separate /home partition will come in handy when reinstalling Arch (any linux distribution), or switching between distros, because it is the equivalent of D:/ in Windows. Also consider LVM.
Last edited by bstaletic (2014-02-28 23:25:33)

SCCM's OSD (not MDT): Task sequence can be tweaked into imaging Windows+VHD Native Boot, but can it go all the way and deploy?

Hello All,
What I am trying to do is use SCCM's own OSD Task Sequence / Windows PE to deploy an operating system that boots using VHD Native Boot. (C:\ = VHD File with Windows, D:\ Data drive with BCDBoot).
MDT 2013 Can do it I've been told, but I am putting off MDT until Windows 10 if I can get away with it.
TechNet VHD Native Boot on Windows 8.1:
http://technet.microsoft.com/en-us/library/hh825689.aspx
http://technet.microsoft.com/en-us/library/hh825691.aspx
The good news is it is working up to the "Apply Operating System" phase, but that apply operating system phase is reported as an error even though it completes successfully. It can't clean up the SMSTS folder it's looking for on the C:\ because
it's been moved over to the D:\ by a diskpart script. We are left with the deployment working but requiring IT staff to deal with the OOBE Personalization wizard and adding each PC to the domain manually. From that point on the SCCM client can do the rest,
which works for US before we upgrade to Windows 10 with utilizing MDT.
I am not talking about deploying an OS to a VHD file and putting that file on a network share i.e.
http://blogs.technet.com/b/configurationmgr/archive/2013/10/31/new-in-system-center-2012-r2-configuration-manager-deploying-an-operating-system-to-a-virtual-hard-drive-vhd.aspx
I reported getting the diskpart script working first here:
https://social.technet.microsoft.com/Forums/en-US/ff124f09-1d2e-4fc4-a5b6-63b683f3d208/native-vhd-boot-deployments-from-sccm-2012-r2?forum=configmanagerosd
Here it is:
rem work around any USB disk left in or any CDROM detected by PE as drive D
select volume D
assign letter=F noerr
rem select the formatted volume and reassign it's drive letter
select volume C
assign letter=D
rem create and setup VHD file
create vdisk file=D:\DEV_WIN81.VHD maximum=250000 type=expandable
select vdisk file=D:\DEV_WIN81.VHD
attach vdisk
create partition primary
active
format FS=NTFS quick label="Developer Win81 VHD"
assign letter=C
rescan
exit
(type=fixed is better for performance - we'll surely activate when we have dual boot 8.1 / Windows 10 later for the Win10 VHD's)
The Task Sequence looks like this:
I'd like to add a few more steps after apply operating system if I can, but I have to resolve this error with "Apply Operating system before I can go further."
Question:
Can an OSD guru tell me if there are any Task Sequence Variables we could throw at this to make the Apply Operating System sequence complete without error so we can do all SCCM OSD Deployment steps?
If we can, then someone (not me) gets to add a new TechNet blog post about this being possible. It's my understanding presently that only MDT can support deploying WIM files into VHDs on Workstations, that boot them.
The install image was created using dism to convert a VHD from a Hyper-V host into a wim. I know I'm meant to use SCCM to capture it, but I don't think that's causing this problem because when we are deploying from that image to a HDD without VHD we don't
get any issues.
I'm only allowed enough characters to paste the tail end of the apply operating system phase only:
<![LOG[Execution engine result code: Success (0)]LOG]!><time="18:29:37.691-420" date="12-26-2014" component="TSManager" context="" type="1" thread="960" file="tsmanager.cpp:929">
<![LOG[Cleaning Up.]LOG]!><time="18:29:37.691-420" date="12-26-2014" component="TSManager" context="" type="1" thread="960" file="tsmanager.cpp:675">
<![LOG[Removing Authenticator]LOG]!><time="18:29:37.691-420" date="12-26-2014" component="TSManager" context="" type="1" thread="960" file="tsmanager.cpp:686">
<![LOG[shKey.DeleteValue( c_szRegValue_SecurityToken ), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\ccmutillib\ccmutillib.cpp,1660)]LOG]!><time="18:29:37.691-420" date="12-26-2014" component="TSManager" context="" type="0" thread="960" file="ccmutillib.cpp:1660">
<![LOG[Cleaning up task sequence folder]LOG]!><time="18:29:37.691-420" date="12-26-2014" component="TSManager" context="" type="1" thread="960" file="utils.cpp:2329">
<![LOG[Unable to delete file C:\_SMSTaskSequence\TSEnv.dat (0x80070005). Continuing.]LOG]!><time="18:29:37.738-420" date="12-26-2014" component="TSManager" context="" type="1" thread="960" file="ccmfile.cpp:1056">
<![LOG[hr, HRESULT=80070091 (e:\nts_sccm_release\sms\framework\core\ccmcore\ccmfile.cpp,1218)]LOG]!><time="18:29:37.738-420" date="12-26-2014" component="TSManager" context="" type="0" thread="960" file="ccmfile.cpp:1218">
<![LOG[Failed to delete directory 'C:\_SMSTaskSequence']LOG]!><time="18:29:37.738-420" date="12-26-2014" component="TSManager" context="" type="2" thread="960" file="ccmfile.cpp:1218">
<![LOG[(dwRet = ::SetNamedSecurityInfoW ((WCHAR*) pszObjectName, objectType, OWNER_SECURITY_INFORMATION, pOwnerSID, NULL, NULL, NULL)) == ERROR_SUCCESS, HRESULT=80070005 (e:\qfe\nts\sms\framework\tscore\utils.cpp,6675)]LOG]!><time="18:29:37.738-420" date="12-26-2014" component="TSManager" context="" type="0" thread="960" file="utils.cpp:6675">
<![LOG[SetNamedSecurityInfo() failed.]LOG]!><time="18:29:37.738-420" date="12-26-2014" component="TSManager" context="" type="3" thread="960" file="utils.cpp:6675">
<![LOG[SetObjectOwner() failed. 0x80070005.]LOG]!><time="18:29:37.738-420" date="12-26-2014" component="TSManager" context="" type="3" thread="960" file="utils.cpp:6687">
<![LOG[SetObjectOwner (szFName, SE_FILE_OBJECT, c_szAdministrators), HRESULT=80070005 (e:\qfe\nts\sms\framework\tscore\utils.cpp,6772)]LOG]!><time="18:29:37.738-420" date="12-26-2014" component="TSManager" context="" type="0" thread="960" file="utils.cpp:6772">
<![LOG[RemoveFile() failed for C:\_SMSTaskSequence\TSEnv.dat. 0x80070005.]LOG]!><time="18:29:37.738-420" date="12-26-2014" component="TSManager" context="" type="3" thread="960" file="utils.cpp:6816">
<![LOG[RemoveDirectoryW failed (0x80070091) for C:\_SMSTaskSequence]LOG]!><time="18:29:37.738-420" date="12-26-2014" component="TSManager" context="" type="2" thread="960" file="utils.cpp:6900">
<![LOG[Deleting volume ID file C:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca ...]LOG]!><time="18:29:37.738-420" date="12-26-2014" component="TSManager" context="" type="1" thread="960" file="resolvesource.cpp:506">
<![LOG[DeleteFileW(sVolumeIDFile.c_str()), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,508)]LOG]!><time="18:29:37.738-420" date="12-26-2014" component="TSManager" context="" type="0" thread="960" file="resolvesource.cpp:508">
<![LOG[Deleting volume ID file D:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca ...]LOG]!><time="18:29:37.738-420" date="12-26-2014" component="TSManager" context="" type="1" thread="960" file="resolvesource.cpp:506">
<![LOG[DeleteFileW(sVolumeIDFile.c_str()), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,508)]LOG]!><time="18:29:37.738-420" date="12-26-2014" component="TSManager" context="" type="0" thread="960" file="resolvesource.cpp:508">
<![LOG[Successfully unregistered Task Sequencing Environment COM Interface.]LOG]!><time="18:29:37.738-420" date="12-26-2014" component="TSManager" context="" type="1" thread="960" file="environmentlib.cpp:910">
<![LOG[Command line for extension .exe is "%1" %*]LOG]!><time="18:29:37.738-420" date="12-26-2014" component="TSManager" context="" type="0" thread="960" file="commandline.cpp:228">
<![LOG[Set command line: "X:\sms\bin\x64\TsProgressUI.exe" /Unregister]LOG]!><time="18:29:37.738-420" date="12-26-2014" component="TSManager" context="" type="0" thread="960" file="commandline.cpp:731">
<![LOG[Executing command line: "X:\sms\bin\x64\TsProgressUI.exe" /Unregister]LOG]!><time="18:29:37.738-420" date="12-26-2014" component="TSManager" context="" type="1" thread="960" file="commandline.cpp:827">
<![LOG[==========[ TsProgressUI started in process 8012 ]==========]LOG]!><time="18:29:37.754-420" date="12-26-2014" component="TsProgressUI" context="" type="1" thread="8040" file="winmain.cpp:330">
<![LOG[Command line: "X:\sms\bin\x64\TsProgressUI.exe" /Unregister]LOG]!><time="18:29:37.754-420" date="12-26-2014" component="TsProgressUI" context="" type="0" thread="8040" file="winmain.cpp:332">
<![LOG[Unregistering COM classes]LOG]!><time="18:29:37.754-420" date="12-26-2014" component="TsProgressUI" context="" type="1" thread="8040" file="winmain.cpp:204">
<![LOG[Unregistering class objects]LOG]!><time="18:29:37.754-420" date="12-26-2014" component="TsProgressUI" context="" type="1" thread="8040" file="winmain.cpp:495">
<![LOG[Shutdown complete.]LOG]!><time="18:29:37.754-420" date="12-26-2014" component="TsProgressUI" context="" type="1" thread="8040" file="winmain.cpp:512">
<![LOG[Process completed with exit code 0]LOG]!><time="18:29:37.754-420" date="12-26-2014" component="TSManager" context="" type="1" thread="960" file="commandline.cpp:1123">
<![LOG[Successfully unregistered TS Progress UI.]LOG]!><time="18:29:37.754-420" date="12-26-2014" component="TSManager" context="" type="1" thread="960" file="utils.cpp:2903">
<![LOG[Sending success status message]LOG]!><time="18:29:37.754-420" date="12-26-2014" component="TSManager" context="" type="1" thread="960" file="tsmanager.cpp:784">
<![LOG[MP server http://OUR-SCCM.ourcompany.com. Ports 80,443. CRL=false.]LOG]!><time="18:29:37.754-420" date="12-26-2014" component="TSManager" context="" type="1" thread="960" file="utils.cpp:5881">
<![LOG[Setting authenticator]LOG]!><time="18:29:37.785-420" date="12-26-2014" component="TSManager" context="" type="1" thread="960" file="utils.cpp:5903">
<![LOG[Set authenticator in transport]LOG]!><time="18:29:37.785-420" date="12-26-2014" component="TSManager" context="" type="0" thread="960" file="libsmsmessaging.cpp:7734">
<![LOG[Sending StatusMessage]LOG]!><time="18:29:37.785-420" date="12-26-2014" component="TSManager" context="" type="1" thread="960" file="libsmsmessaging.cpp:4023">
<![LOG[Setting message signatures.]LOG]!><time="18:29:37.801-420" date="12-26-2014" component="TSManager" context="" type="0" thread="960" file="libsmsmessaging.cpp:1295">
<![LOG[Setting the authenticator.]LOG]!><time="18:29:37.801-420" date="12-26-2014" component="TSManager" context="" type="0" thread="960" file="libsmsmessaging.cpp:1325">
<![LOG[CLibSMSMessageWinHttpTransport::Send: URL: OUR-SCCM.ourcompany.com:80 CCM_POST /ccm_system/request]LOG]!><time="18:29:37.801-420" date="12-26-2014" component="TSManager" context="" type="1" thread="960" file="libsmsmessaging.cpp:8604">
<![LOG[Request was successful.]LOG]!><time="18:29:37.832-420" date="12-26-2014" component="TSManager" context="" type="0" thread="960" file="libsmsmessaging.cpp:8939">
<![LOG[::RegQueryValueExW(hSubKey, szReg, NULL, NULL, NULL, &dwSize), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\utils.cpp,811)]LOG]!><time="18:29:37.832-420" date="12-26-2014" component="TSManager" context="" type="0" thread="960" file="utils.cpp:811">
<![LOG[RegQueryValueExW is unsuccessful for Software\Microsoft\SMS\Task Sequence, SMSTSEndProgram]LOG]!><time="18:29:37.832-420" date="12-26-2014" component="TSManager" context="" type="2" thread="960" file="utils.cpp:811">
<![LOG[GetTsRegValue() is unsuccessful. 0x80070002.]LOG]!><time="18:29:37.832-420" date="12-26-2014" component="TSManager" context="" type="2" thread="960" file="utils.cpp:842">
<![LOG[End program: ]LOG]!><time="18:29:37.832-420" date="12-26-2014" component="TSManager" context="" type="1" thread="960" file="tsmanager.cpp:805">
<![LOG[Finalize logging request ignored from process 856]LOG]!><time="18:29:37.832-420" date="12-26-2014" component="TSManager" context="" type="1" thread="960" file="tslogging.cpp:1737">
<![LOG[Process completed with exit code 0]LOG]!><time="18:29:37.863-420" date="12-26-2014" component="TSPxe" context="" type="1" thread="592" file="commandline.cpp:1123">
<![LOG[Task Sequence Manager returned code 0x00000000]LOG]!><time="18:29:37.863-420" date="12-26-2014" component="TSPxe" context="" type="1" thread="592" file="tsmediawizardcontrol.cpp:2180">
<![LOG[Exiting with return code 0x00000000]LOG]!><time="18:29:37.863-420" date="12-26-2014" component="TSPxe" context="" type="1" thread="592" file="tsmbootstrap.cpp:1238">
<![LOG[Execution complete.]LOG]!><time="18:29:37.879-420" date="12-26-2014" component="TSBootShell" context="" type="1" thread="760" file="bootshell.cpp:693">
<![LOG[hMap != 0, HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentscope.cpp,493)]LOG]!><time="18:29:37.879-420" date="12-26-2014" component="TSBootShell" context="" type="0" thread="760" file="environmentscope.cpp:493">
<![LOG[m_pGlobalScope->open(), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentlib.cpp,335)]LOG]!><time="18:29:37.879-420" date="12-26-2014" component="TSBootShell" context="" type="0" thread="760" file="environmentlib.cpp:335">
<![LOG[this->open(), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentlib.cpp,553)]LOG]!><time="18:29:37.879-420" date="12-26-2014" component="TSBootShell" context="" type="0" thread="760" file="environmentlib.cpp:553">
<![LOG[::RegQueryValueExW(hSubKey, szReg, NULL, NULL, NULL, &dwSize), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\utils.cpp,811)]LOG]!><time="18:29:37.879-420" date="12-26-2014" component="TSBootShell" context="" type="0" thread="760" file="utils.cpp:811">
<![LOG[RegQueryValueExW is unsuccessful for Software\Microsoft\SMS\Task Sequence, SMSTSEndProgram]LOG]!><time="18:29:37.879-420" date="12-26-2014" component="TSBootShell" context="" type="2" thread="760" file="utils.cpp:811">
<![LOG[GetTsRegValue() is unsuccessful. 0x80070002.]LOG]!><time="18:29:37.879-420" date="12-26-2014" component="TSBootShell" context="" type="2" thread="760" file="utils.cpp:842">
<![LOG[End program: ]LOG]!><time="18:29:37.879-420" date="12-26-2014" component="TSBootShell" context="" type="1" thread="760" file="bootshell.cpp:725">
<![LOG[Finalizing logging from process 752]LOG]!><time="18:29:37.879-420" date="12-26-2014" component="TSBootShell" context="" type="1" thread="760" file="tslogging.cpp:1741">
<![LOG[Finalizing logs to root of first available drive]LOG]!><time="18:29:37.879-420" date="12-26-2014" component="TSBootShell" context="" type="1" thread="760" file="tslogging.cpp:1583">
<![LOG[Successfully finalized logs to D:\SMSTSLog]LOG]!><time="18:29:37.879-420" date="12-26-2014" component="TSBootShell" context="" type="1" thread="760" file="tslogging.cpp:1640">
<![LOG[Cleaning up task sequencing logging configuration.]LOG]!><time="18:29:37.879-420" date="12-26-2014" component="TSBootShell" context="" type="0" thread="760" file="tslogging.cpp:584">
MCSE,MCNE,SCO,Sair Linux/GNU, Open source-enthusiast.

I have already set it to FALSE. The solution to this will be some different OSD Task Sequence variables or a statement that it can't be made to work.
I believe that setting defines what volume will be the BOOT / OS Drive Letter. Some people were getting D:\WINDOWS as their boot volume drive letter. Setting to true means whatever was the System Drive letter (usually C) in the image will remain as such
after it was was applied, setting it to false will make the system have the same drive letter arrangement as what Windows PE detects. In my case I set it to false so that no matter what the new VHD file setup as drive C will be the system drive. I'll set it
to true on the next deployment but I expect there to be no difference, because in both PE and the WIM the installation volume is the C:.
We are talking about the DRIVE LETTERS Windows PE SCCM OSD is using for it's temporary files - and how we can manipulate these locations using OSD Task Sequence Variables, so the Apply OS doesn't try and clean up files that are not there
- and fail with an error if you have added a VHD Native Boot volume.
This OSDPreserveDriveLetter setting isn't having any effect on the problem here.
I believe that Format step is setting some task variables used by the OSD Deployment process - telling it where to store it's temporary files. However between the Format Disks and Apply operating system steps the OSD Task Sequence isn't picking up on the
fact what was the C:\ after Format HDD step is now the D:\ .
A developer who has an understanding of how the OSD boot process executes in order would be able to see what's going on here.
MCSE,MCNE,SCO,Sair Linux/GNU, Open source-enthusiast.

How can I share ONE thunderbird profile between XP x64 and Windows 7 dual booting on the same machine?

I have a primary XP profile and associated mailboxes/accounts. I am dual-booting to Windows 7 and want to share only that XP profile so that all of my mail appears (and is synchronized) in the Thunderbird browser regardless of which OS I boot to. This seems as simple as pointing the Win 7 mail account local profile to the original XP profile, but that doesn't work. And - please - don't point this question to the response regarding sharing profiles between windows and Linux. That thread hasn't helped. Thanks in advance

Well I have no idea hat thread your talking about, but regardless the process is always the same, use the profile manager to create a new profile and point the profile manager to the profile you wish to use.
see https://support.mozilla.org/en-US/kb/profiles-tb#w_restoring-a-profile-backup
and
http://kb.mozillazine.org/Moving_your_profile_folder_-_Thunderbird

Windows Vista and Windows 7 Only Boots to a black screen with a mouse cursor

Windows Vista and Windows 7 Only Boots to a black screen with a mouse cursor after I installed Mcafee Internet Security.
Hi I installed 1of 3 McAfee Internet Security protections on my HP laptop a few weeks ago with no issues. I Have a Dell XPS 420 desk top with Windows Vista operating
system, it’s never had any issues, until 2 nights ago I installed McAfee Internet Security (detected incompatible files and will remove) pc now only boots up to a black screen with a mouse cursor, it will show the windows logo and a hash symbol floating around
the screen. Now 2 weeks ago I installed the same program on my Dell all in one desk top with Windows 7, the same issue happen but that pc has no screen activity, I tried a back to factory reboot on this one, still black screen.

Hi,
Please install the compatible version of McAfee Internet Security:
http://home.mcafee.com/store/internet-security
if you have startup issue, you can boot into Safe Mode to uninstall the problematic software to go back into Windows.
Alex Zhao
TechNet Community Support

I tried installing Windows 7 using Boot Camp, but it didn't work, I don't know how to "unparticion" the memory I gave to Boot Camp, and Boot Camp "vanished", help...

I tried installing Windows 7 using Boot Camp, but it didn't work.
Although it didn't work, the memory is still divided. So I looked for Boot Camp in aplications, but it literally vanished...
So I tried downloading it again, but I only found EXE files... they don't work on my MacBook Pro...
It's very new... Bought it recently...
Please... I need help to unparticion memory back to original Mac HD and install Boot Camp...
Thanks...

Below is the paragraph from the instructions. Follow it exactly and then report what happens at each stage.
How you remove Windows from your computer depends on whether you installed
Windows on a second disk partition or on a single-volume disk.
If you installed Windows on a second disk partition: Using Boot Camp Assistant as
described below, remove Windows by deleting the Windows partition and restoring
the disk to a single-partition Mac OS X volume.
If your computer has multiple disks and you installed Windows on a disk that has only one
partition: Start up in Mac OS X and use Disk Utility, in the Utilities folder, to reformat it
as a Mac OS X volume.
To delete Windows and the Windows partition:
1 Start up in Mac OS X.
2 Quit all open applications and log out any other users on your computer.
3 Open Boot Camp Assistant.
4 Select “Remove Windows 7,” and then click Continue.
5 Do one of the following:
a If your computer has a single internal disk, click Restore.
b If your computer has multiple internal disks, select the disk with Windows on it,
and then select “Restore to a single Mac OS partition” and click Continue.

Is it possible to use Boot Camp to partition an external hard drive so there is a OSX partition and a Windows partiton? I want to use the external drive for backup only, NOT to load Windows and NOT to use as a boot drive.

I have partitioned the internal hard drive and am running Lion and Win7 Pro on my iMac i5 2.7GHz with 16GB RAM. Can I use Boot Camp to create a Windows partition on an OSX external hard drive to use for backing up both systems to the same HDD? I do NOT want to install OSX Lion or Windows 7 Professional on the external drive. I do NOT want to boot either system from the external drive. The 3TB external drive is for backup only.

Use NTFS for Windows and buy Paragon NTFS for OS X
You can also try Paragon HFS for Windows
As long as you are using for data and backups, you can leave the drive as GPT too.
I would recommend strongly to always have a 2nd bootable Mac OS drive, only need 30GB partition. System maintenance. Though LIon Recovery Mode finally makes it less but not totally unneeded.
And yes you can use Windows to create a partition.
Boot Camp is too broad. Do you want or mean BC Assistant? not needed but probably possible.
MBR has trouble with 3TB drives.

Windows 7 and Multi-boot

Similar Messages

Maybe you are looking for