Windows 7 and no Internet connectivity

I just installed windows 7 on my Mac.  When I try to get online it says windows did not detect a properly installed network adaptor.  If you have a network adaptor, you need to reinstall.   How do I do this?  Do I install on the windows partion?

Did you download the Windows Support Software from within Bootcamp Assistant? Did you then install the downloaded Windows Support Software from within Windows?
Read and follow the Bootcamp Install instructions.

Similar Messages

  • Urgent : Help, window and mac internet connection...

    I'm using a iBook G4 to connect to internet using wi-fi.
    Then i connect it to my Mac Pro using just a LAN cable to share internet connection.
    Now the problem is, when i re-boot to window, how do i get my internet connection from my iBook?

    The connection settings should be exactly the same as under Mac OS X.

  • Why is my macbook pro running so slow and losing internet connection?

    Why is my Macbook Pro downloading so slowly and losing internet connection frequently?

    Write off the MS stuff as indicators for now--starting with Office 2008, they developed very long launch times. The time to launch 2008 on my old 1.25Ghz G4 and my MBP 2.2G are virtually the same. Even document opens/saves are slow compared to Office 2004 and earlier.
    1) You have adequate hard drive space so that eliminates one of the usual suspects.
    2) Check for runaway background processes. Quit all running user applications so the computer is at normal idle. Find Activity Monitor in Applications > Utilities and launch it. If you've not run it before, change the "Show" pulldown at the top of the AM window from its default of "User Processes" to "All Processes." There is a column for "%CPU." Click that column header to sort by CPU usage. Watch the processes "bubble" for about a minute to get a better picture of the usage.
    If any process is using more than about 25 percent of the CPU cycles while the computer is idling, post the names of the processes and we can see if they can be eliminated. My MBP shows nothing using more that about 5 percent on any given test run as long as I close all my user apps.
    3) If you have never done any sort of maintenance procedures, taht can slow you down. Simply restarting the computer a few times a week clear a lot of temporary files. You also may wish to review this article on the Mac OSX periodic maintenance scripts, which, if run, also do a lot of cleanup:
    http://thexlab.com/faqs/maintscripts.html
    There are other useful articles on file maintenance associated with the one. Here's the index:
    http://thexlab.com/faqs/faqs.html
    Check out articles with "Maintain" and "Tuning" in the titles.
    4) Use Disk Utility to check the SMART Status of your hard drive. A failing drive can make things slow before it makes things stop.

  • My computer is running sluggish and the internet connection runs very slow. what can I do?

    My mac air is running slugiish and my internet connection takes forever to change windows...what can I do?

    If the computer is brand new, it may be reviewing (indexing) all you files for search. This will take a few hours to complete.  Otherwise you likely have a program that is running poorly and slowing your system down.
    Open the Fibder
    Click the Go menu at the top of the screen
    Click on utilities menu item under go
    Open the Activity Monitor
    When Activity monitor opens, there will be a lot of data in the window, to make better sense of it click on the column labeled CPU. This will sort entries by how much of your computer's CPU they use. The lower the number the better.
    Locate any programs using 80% or more of your CPU. They are the likely culprits of your speed issue.
    If the speed issue is only related to surfing the internet, then you more than likely have an issue with WiFi instead. Try moving closer to your wireless router to see if it speeds up.

  • Up and Down Internet Connection

    Recently my MacBook is having up and down internet connection. I'm using the new Aiport Extreme base station which is connected to my cable modem. By up and down I mean, the connection seems to go in and out.
    My Airport signal status is full bars, so it seems to see the base station. It is like the radio signal or whatever gets tangled and drops connection. I have completely reset the base station and started fresh. I've unplugged the modem and base station and gone through all the basic troubleshooting steps.
    My wife has a PowerBook G4 and she can surf with no hiccups, while my machine stalls. One thing I have done to keep a solid connection is to connect iTunes to an internet radio station. It seems like the stream keeps the connection without dropping?
    Any ideas on what is going on? Is my internal airport card bad or are is there something else going wrong? Any help or insight is appreciated.
    Thanks.

    Try…
    1) Resetting PRAM…
    http://docs.info.apple.com/article.html?artnum=2238
    2) Setting your Airport to connect to "Preferred networks" rather than Automatic (done in System Preferences > Network > Airport > Airport)
    3) Make sure your home network is at the top of your Preferred networks list
    4) Failing those delete your wireless network profile, apply the change and readd your profile

  • I just bought the new MacBook Air a few days ago and my Internet connection is so slow. My iPhone's connection works fine when connected to the wifi but the MacBook connects for a few seconds then drops completely. What do I do?

    I just bought the new MacBook Air a few days ago and my Internet connection is so slow. My iPhone's connection works fine when connected to the wifi but the MacBook connects for a few seconds then drops completely. What do I do? I tried connecting it to my phone's hotspot and it works perfectly. I'm a new Mac user so I have no idea what to do. I have Comcast xfinity cable and Internet. Thanks for the help.

    Your warranty includes 90 days of phone support. Contact Apple.

  • Why can't I log into my messages or face time and my Internet connection is great

    Why can't I log into my face time or messeges and my Internet connection is fine

    iOS: Troubleshooting FaceTime and iMessage activation

  • I started to download a movie for rent and lost internet connection. Now it tells me to go to my downloads but I can't find them where should I look.

    I started to download a movie for rent and lost internet connection. Now it tells me to go to my downloads but I can't find them where should I look.

    Me too!!! It says check your Downloads, but unable to find Downloads...

  • HT201274 I was in the middle of a restore on my Ipad 2 and lost internet connection about 2/3 of the way through the firmware update, and now it fails everytime I try to restore. It says ERROR 2. Can anyone help?

    I was in the middle of a restore on my Ipad 2 and lost internet connection about 2/3 of the way through the firmware update, and now it fails everytime I try to restore. It says ERROR 2. Can anyone help?

    Resolve specific iTunes update and restore errors - Support - Apple
    Configure your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
    Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.

  • How do i restore phone back to factory settings if there is no sim card and no internet connection

    There is no sim card in my phone and no internet connection. How do i restore the phone back to the factory settings?

    That is about all a user can do
    One last thing ,try this thread
    how to put iOS 7 into DFU mode
    and try that although not an Apple  supported process and read the posts carefully
    but it does look as if it now is a hardware issue .....sorry
    Did you not clear it before sending to the online Co
    just a thought was it carrier locked ?if so I would guess the online Selling Co may have hacked it to remove the lock to sell it as a not carrier locked device

  • After installing IOS 6, my iphone started to close applications alone and has internet connection instability Wi-fi

    After installing IOS 6, my iphone started to close applications alone and has internet connection instability Wi-fi

    please try this.
    airplane mode on + wifi
    You will get very good Internet connection.
    This is bug of iOS 8. I already reported this to Apple to solve this problem ASAP.

  • Just purchased Airport Extreme ac and lost internet connection 3X. Reset to factory settings and worked for 2 days then lost connection and remedied by unplugging power supply. Anyone else having problems?

    Just purchased Airport Extreme ac and lost internet connection 3X in less than one week. Fisrt time, reset to factory settings and fixed problem. Has occurred 2 additional times and connection re-established by unplugging AP extreme. Anyone else having these problems?  Do I have a bad router?  Thanks.

    I definitely think this is a Mavericks issue.  My iMac running Mavericks is the ONLY system in the house that drops the network randomly while all other systems never lose the network.  No idea how to resolve this, but here is the workaround I'm posting: 
    I've had the 'network drop' issue with my Airport Extreme for the last 2 months.  It reconnects when I pull the ethernet cable and plug it back in.  I've tried downgrading the AE firmware, resetting to factory, etc.  Nothing worked.  I finally threw in the towel and created a script that monitors my network connectivity and restarts my interface if it senses it has dropped:
    #!/bin/ksh
    while true
    do
      yup=`ping -c1 -t2 www.google.com|grep from`
      if [[ -n $yup ]]
         then echo "Internet is connected!"
      else
            ifconfig en0 down; ifconfig en0 up
            echo "Down at `date +%m%d%Y%H%M%S`">>./dropped.out
      fi
      sleep 5
    clear
    done
    I know its a workaround, but its saving me the headache of constantly pulling my cable and putting it back in!
    Good luck!
    -Mike Gray

  • Setting up a new TC.  Everything went fine.  I was able to connect a macbook air, 2 ipads, an Iphone 6, and even a windows 7 PC.  All devices showed a complete and functioning internet connection, but none of the devices could access the internet.

    I am trying to set up internet connection to my home using a 3gig Airport time capsule as a router.  I unplugged the cable from the existing router, and plugged it into the ethernet port of the TC.  The TC fired up found tttttttthe internet connection, and glowed green.  I set up the password, and all, and was then able to connect a Windows 7 PC, 2 ipads, and iphone 6, and a macbbook air, all running the most current os.  All devices connect with the internet via the Airport device.  they all say that there is a fully functioning internet connection, but none of them can actually connect to the internet.  When I run a speed test via OKLA I am told that the test failed to innatiate.When I try to do a search I get an error message that the page cannot open because safari cannot make a secure connection to the server.
    Any suggestions?

    Inside the house I have what looks like a phone cable that is plugged into a power supply, and into a router.
    What is this router?? Is it the TC or a router supplied by the ISP?
    It will depend on how the system works.. but the instructions from skybeam are fairly simple.. you just setup a router with dhcp set on the WAN port for connection.
    On the airport utility open your TC by clicking it then clicking edit.
    Make sure the WAN is set correctly and the ISP ethernet cable is plugged into it.
    And make sure Network is set to DHCP and NAT.
    Please give me the screenshots of the same things from your setup.

  • [SOLVED-partly] Linux and no internet connection

    Well, since mid November I have nothing but problems with my Arch Linux machine. I can't get any internet connection on that machine. I have a network at home with 2 windows machines (XP & Vista), a Windows 2003 server running as an Exchange server and DNS server and Domain controller and ps3, xbox 360 and Wii. The two windows machines run on a static IP, the ps3, xbox 360 and Wii run on dhcp. All machines run on LAN through a switch except the Wii it runs on wireless. Now my Arch Linux machine also runs on static IP set up as described in the installation guide via rc.conf, hosts and resolv.conf. As mentioned earlier since mid November I haven't been able to get any internet connection on that machine. I haven't changed anythnig in my setup on the machine or the network. when i start the machine for the first time during a day I actually do the get internet connection and network connection but if I restart then I lose it. I am not able to ping the gateway or the DNS server. I can get interrnet back again I turn off the machine and turn off the motherboard and let the machine cool off for 20 minutes. Then if I turn it on again I have internet again but if i'll have to restart then the problem reappears.
    After two weeks with this issue I decided to get network card but that didn't help either I still had the problem. Then I simply bought a new machine (DELL Studio) and did a fresh installation of Arch and STILL the problem exists and it is driving me FREAKING CRAZY NOW!!! I tried to my machine on dhcp but still the same issue. internet on first boot, reboot no internet or network, shutdown machine and motherboard (unplug machine) --> internet again after waiting 20 minutes. None of my other machines running windows or the consoles have problems getting internet. I've tried to run distros on the machines (Ubuntu Live CD) but I have the same problem. I am very close to going back to windows and I REALLY don't want to (been using Linux since 2003) but this problem here is a show stopper/EPIC FAIL. I am very very happy with Arch Linux and really don't want to change distro either. I need suggestions now on what I can look for in order to find the problem. I've already changed network cards, bought a new machine and even bought new switch because we thought it might be the switch causing the problems (8 port switch) because turning off the switch would give me my internet back. Again it is only my Linux machine that is having the connection problems none of the other machines have those.
    PLEASE HELP!!!
    Kind Regards
    André
    Last edited by fettouhi (2008-12-19 07:27:01)

    Well, I celebrated a bit to fast after 30 minutes or so I lost internet connection but not by restarting. I didn't use the computer for like 30 minutes and when I did tried to open a browser nothing happended. I tried then to ping the gateway and the server but couldn't reach them. So I turned off the computer completely for 20 minutes and then I started again and chenged the DNS address from my server to the DNS addresses I get directly from my ISP. So I'm going around the server now and seems to work for now. This morning I could start the machine and restart it 2 times and every time I had internet. Hope this solves it for now, still don't understand what the problem is though.
    Regards
    André

  • Privacy,emails,and third party enails,and ny phone contacts blinking on and off and My internet connection working properly

    Monday November 11,2013-Dear firefox,I have several questions and several complaints also.-) why am I receiving 3 party emails and it states on this download if you don't want them to have a check Mark by this. I have done away with 3 party emails,now I get emails from all sorts of 3party emails in Mine and My dads and family private email inbox and spam, ones we didn't sign up for in our inbox and spam inappropriate emails and all sorts of emails, and also My phine after download,has slowed My internet connection and has caused , My contacts on My phone to light up and blink on and off.-) If this is suppose to be a download for My phone? and email to make it work more accurate and rapid it hasn't mine,I'm not happy with this experience at all on firefox. please email me back to Mine and My dads and familys honestly and truthfully answering abd taken care of this explaining into detail, in mine and My dads and familys private email thanks why were having so many difficulties and please send it to [email address removed for privacy] regarding this.-) I will be emailing through out the week to make sure this is honestly explained ans taken care of in a timely Manner.-) And I will not refer anyone to try Firefox -)
    ====email address removed to secure your privacy. ====

    Could you start by indicating what you downloaded and for which system (Windows, Mac, Android, etc.). Please look up the download URL in the history of the browser you used to download it so a volunteer can investigate what you got.

  • Failing to install Domain Services on a Windows 2012R2 without internet connection

    Hello
    i have a windows 2012r2 server without internet connection.
    when i try to add the Domain Services role it failed in the Feature installation phase
    i even tried to provide an alternate location from a ISO source but that didn't help either 
    im lost here what should i do?
    i attached the fail screenshot
    Thanks 
    Guy

    What error is shown in Event Viewer when the install fails?
    Is it the first 2012 R2 DC in a lower level domain?
    Try installing ADDS via PowerShell:
    Import-Module ServerManager
    Install-windowsfeature -name AD-Domain-Services –IncludeManagementTools
    The other thing that it could be is an issue with the WID (Windows Internal Database)
    Check in the Event Viewer for anything to do with Service: MSSQL$MICROSOFT##WID and perhaps try this:
    Adjust your domain (or domain controller if appropriate) security policy to allow “NT SERVICE\MSSQL$MICROSOFT##WID” to log on as a service, a GPO setting that can be found under Computer Configuration > Policies > Windows Settings > Security Settings
    > Local Policies > User Rights Assignment.
    Kind Regards
    Michael Coutanche
    Blog:   
    Twitter:   LinkedIn:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Maybe you are looking for

  • View with Bind Variable and ADF table

    Hi all, Please note what i have noticed. I created a view with a bind parameter, overriden the prepareSession of my Application Module to set the bind parameter and execute the query. I then created a simple jsf page and included the view as an adf r

  • Lack of support at T Mobile Stores

    My whole family are BB users. Wanted to upgrade. Went to 2  T mobile stores in NJ. First Rep couldn't use the phone. Stated didnt know how.  2nd store said BB was locked up and couldn't take it out. Then said "Honestly not many of our employees like

  • Is it really Necessary?

    Is it really necessary to download your Blackberry OS from a specified carrier like this one? :https://swdownloads.blackberry.com/Downloads/entry​.do?code=4558DBB6F6F8BB2E16D03B85BDE76E2C

  • Software Updates Error Message 3072?

    Recently when I get a notice to update software or apps, I click "Update" and get a message that says "An error occured. The operation was cancelled. (3072)"  Does anyone know what this means and how I can get my software to update?  Thanks.

  • Transferring Office Mac 2011 license after damaging computer

    I have had to buy a new macbook air after I spilt water on my laptop. The one I have had to replace was very new and I had just purchased office for mac 2011 for it. One of the Geniuses told me that there was a way if accidental damage had caused the