Windows 7 and/or Black Armor Discovery stopped recognizing my BA NAS 110

Hi Larry, I just wanted to let you know I've sent your thread over to my support team and am awaiting feedback. Thanks, LarryG. for the mention/tag!

Overnight, my blue LED turned to amber.
Black Armory discovery cannot find it as a server.
Windows Explorer finds it as a storage drive and permits copying files to and from the non-password protected folders. Cannot get access to the protected folders.
Black Armor Backup still works but won't let me back up to the protected Backup folder. Can back up to any other non-protected folder.
Tried the "repair" utility on the Black Armory Discovery installation disk, but no luck.
Tried pinging the IP address (it has a fixed IP) using Command line. No luck.
In Device manager, the icon for the 110 has a yellow error triangle on it.
Any suggestions?
This topic first appeared in the Spiceworks Community

Similar Messages

Trying to reformat and reinstall windows but get black screen with cursor

Im trying to reformat my computer after a blue screen error and when i pop in my disk to reformat and install it goes through the first stuff...opening files then it says starting windows and then black screen with cursor..nothing else..i can move the
cursor but i cant click anything..nothing happens.

Hi Marrik,
Is there any error code or error message displayed in the installation process ? because just based on your description in the post, it is difficult to find the root cause for a black screen even after a clean install, this might be caused by a corrupt installation
media or a hardware issue, so, I give two potential suggestion:
1.Try another Windows installation media and perform a clean install again to see the result.
2.Go to the computer vendor for hardware support, this also can be caused by a memory or hard disk issue.
Regards
Wade Liu
TechNet Community Support

Bootcamp has stopped recognizing that it has a modem. Drivers are up to date, no malware, modem works fine in OSx.

I use OSx for work-related purposes, but my family uses bootcamp. This has worked well for us for about 2 years.
About three weeks ago, bootcamp suddenly started struggling with the wireless internet connection...lots of little drops usually (but not always) followed by quick reacquisitions. This problem did not (and does not) occur in OSx or for any other device in our house.
I looked into the drivers, and they were all up to date. I then initiated a scortched earth campaign of antivirus and malware detection, thinking maybe something snuck in via my son's Steam account or whatever....but this actually brought up nothing at all. Still, the problem continued.
And then, early yesterday, bootcamp stopped recognizing that it even has a wireless modem (in the middle of a session; the computer booted up with internet, then the modem "vanished" after 30-40 minutes). It now only recognizes ethernet cables as a viable internet source.
OSx, again, continues to work fine.

Can you check Control Panel -> Hardware -> Network Adapters and post a screen shot? If it it works correctly in OSX, the hardware is fine. It must be a driver update? Is Windows setup for Automatic Updates.
One option is to find the appropriate BC drivers using System requirements to install Windows on your Mac via Boot Camp - Apple Support and then Boot Camp: Install or repair Boot Camp drivers to go back to the original Apple drivers.

ITunes stopped recognizing my iPhone after upgrading to Leopard.

I recently upgraded from Tiger to Leopard, and iTunes (8.0.2) stopped recognizing my iPhone while iPhoto still works with my iPhone (I was able to download photos from my phone using iPhoto).
What's going on?
It's crazy! When iPhoto recognizes my iPhone, either iTunes or iSync doesn't reads the phone. It doesn't even give any error messages.
I did every solution I found on the net. Repair permission, Remove Local folder in Library.. etc..etc.. none of them worked.

After upgrading from Tiger (10.4.x) to Leopard (10.5.0=>10.5.6), my iPod Touch is no longer recognized by iTunes 8.0.2. The iPod Touch no longer appears in iTunes' "source list" (left side pane in iTunes' GUI).
Immediately prior to that upgrade, my iPod Touch was working great with Tiger (10.4.x). iTunes 8.0.2 recognized it (listed it in sources) and always synchronized with it successfully.''
My iPod Touch is also not shown in the Finder. However, it does show up as recognized in iPhoto.
Any ideas on how to get the iPod recognized again in iTunes under Leopard?

ITunes stopped recognizing my iPhone.

I recently upgraded from Tiger to Leopard, and iTunes (8.0.2) stopped recognizing my iPhone while iPhoto still works with my iPhone (I was able to download photos from my phone using iPhoto).
What's going on?

I have essentially the same problem with my MacBookPro. I have recently installed Leopard (within the last month); my iTunes is 8.0.2; my iPhone is nearly one year old, not the 3G, but was relatively recently updated to 2.2 (5G77). I have automatic syncing turned off because of another problem with the phone deleting/duplicating/triplicating/etc. all/parts of various contact info, but that is another story as I have been able to manually sync until the Leopard upgrade.

Shuffle causes Windows to stop recognizing all other USB ports!?!

When I plug my new Shuffle in to any USB Port, Windows stops recognizing all other USB drives. (this includes my internet connection and external hard drive with all music) If I disconnect the Shuffle and repower the other devices, they work normally again. I've seen this same problem on this forum and the answer did not help - here is the answer/link given the previous posting: http://docs.info.apple.com/article.html?artnum=93499
The shuffle has its own drive letter on my computer, so no conflict here AND my husband's shuffle works just fine on this same usb port and same cradle. As soon as I eject the working shuffle and place the new one in the cradle, my computer shuts down and no other USB Ports work until I unplug the shuffle and repower the others. Maybe a shuffle problem?
Thanks for your help!

The shuffle has its own drive letter on my computer,
so no conflict here AND my husband's shuffle works
just fine on this same usb port and same cradle. As
soon as I eject the working shuffle and place the new
one in the cradle, my computer shuts down and no
other USB Ports work until I unplug the shuffle and
repower the others. Maybe a shuffle problem?
Thanks for your help!
Are you "eject"ing your husband's shuffle in iTunes OR are you "safely removing hardware" in Windows?

Why did my Windows 8 computer stop recognizing my ICD-PX820 to upload files?

I have been using my Sony ICD-PX820 recorder with my Lenovo Idea Pad, which I purchased a year ago running Windows 8 (which has since updated to Windows 8.1) I have been able to plug my recorder into this computer, using this OS, to upload audio files for more than a year...until it suddenly stopped recognizing it today. When I plug it in, the battery icon disappears from the recorder's screen, so I assume the battery is charging (therefore it IS connected) but the device does not show up under My Computer (or pop up as a folder like it always did before.)
Nothing changed - there were no new updates on my computer, no settings changed on either device, it just stopped working.
Sony Customer Service was no help - they sent me a link to a page suggesting I unplug everything, restart my computer and just plug in the recorder, which I did before I contacted them. I tried updating my drivers, but the product page says there are no drivers available to download for this OS (Windows 8.1) - even though I have been using this device with this OS for a while!
Help! I have an audio file on my recorder I need to email to a colleague overseas, and I need to record more interviews tomorrow so this is urgent!

Hi bronicba,
Welcome to the Sony Community!
Thank you for your message. I suggest you try plugging the recorder into a different computer if possible, try a different USB cable, and try plugging the recorder to different ports on the computer. There is a possibility that the pin that is responsible for charging the unit is still working and that the pins for getting the device detected might have gotten defective. So I suggest you try connecting it to a different pc.
Thanks and regards,

Installing iTunes made windows stop recognizing my iPod

*Short version:* the USB driver included in Apple Mobile Device Support with the latest version of iTunes did not work. Deleting them made my iPod work.
*Long Version:*
I had an iPod Mini (4gb, past warranty) that recently had a harddisk failure, so I bought a new Nano. I uninstalled itunes, removed all related files and folders, downloaded itunes 7.5 and installed it, and plugged in the Nano. Error message: "Your hardware failed to install properly." ITunes did not see the ipod.
I spent a couple hours going through the apple.com troubleshooting suggestions, which did not work. Device Manager had the yellow exclamation point icon by "Apple iPod USB Driver" no matter what I did. Eventually, I decided to purge my computer of all Apple products, delete all copies of usbaapl.sys (the nonfunctioning driver) from my computer, and plug in the Nano without installing itunes. It worked! So I installed itunes, rebooted, plugged the Nano back in, and... it didn't work.
So, installing itunes made windows stop recognizing my ipod. At this point I decided that itunes might be using a bad copy of the driver, so I deleted all copies of usbaapl.sys from my computer and tried again. It asked for the install disk for "Apple mobile device" something, so I used Add/Remove Programs to uninstall Apple Mobile Device Support. After that, it's working.
So, I spent three hours troubleshooting because the drivers packaged with the latest version of itunes don't work. Spiffy.
Message was edited by: Tempo502

Had the same problem and I uninstalled all apple products (itunes Apple mobile support, etc.), deleted all usbaapl.sys files, and reinstalled latest version of itunes + quicktime. I had the same problem. I then unplugged my IPOD from the USB connection, put it in disk mode, and then plugged the IPOD back into the USB connection and EVERYTHING WORKED!!
The following article describes how to put an IPOD into disk mode:
http://docs.info.apple.com/article.html?artnum=93651
Good luck,
Tom

Windows and itune not recognizing my ipod shuffle

i got ipod shuffle 2 weeks before .it was working for 2 days. after that i got no response frm other day.now my windows and itune is not showing my ipod and when i connect it to my system orange light blink for three times and then stops.
please do help me...

I've downloaded itunes, tried researching and
troubleshooting til I'm blue! I plug in the ipod and
the only thing my device manager shows is USB mass
storage device. By the way, my ipod did NOT come with
an installation disc. And yes it's fully charged. The
orange lights up while charging and when I plug in
the ear pods the blue light stays lit.
IF the GREEN LED stays lit continuously, SOMETHING is seriously wrong with the Shuffle! READ the following
article, "Understanding iPod shuffles status lights", especially the part on " Using iPod shuffle to play music"
http://docs.info.apple.com/article.html?artnum=300553
iTunes is not recognizing the ipod either (as my
friend said it should)
I even installed itunes on a friends' computer and
had the same problem. I just got this for my son for
Christmas and needless to say he's a bit
disappointed.
Did I buy a lemon?
Perhaps...but they're Not ALL lemons by any means.
Please help!!!

DVD Player suddenly stops recognizing and playing homemade DVDs

The DVD Player in our G5 has suddenly stopped recognizing and playing some home made movies on DVD from several friends. These discs played just fine before, but now we get a message that says "supported disc not available".
I've got the latest version of DVD Player 4.6.5. Why would it suddenly stop reading all these DVDs? Thanks for any ideas or help. Bob Krist
G5 Tower Mac OS X (10.4.7) SONY DVD RW DW-Q28A player

My experience/opinon:
Without blaming Apple, it is a DigitalRightsManagment
problem, Apple is obligated to fullfill. You will
find that your homemade DVD plays fine on any
ordinary PC or even annother MAC-environment, just
not on your own.
As of Mac-OS-X.46(5 not quite sure ) Support for
UDF-Format ceased,
I believe to have read somewhere. So your DVD is
mounted, but does'nt
show up on the desktop.
I am using OSX 10.4.7 (Build 8J135) DVD Player 4.6.5 (Framework 4.6.6)
Home-made video DVD-Rs work fine. DVD player starts when a disk is inserted. The disk shows up on desktop. Get Info and Disk Utility show UDF (Universal Disk Format). Finder shows the VIDEO_TS folder, .VOB files, etc. Get Info's Preview window will even play the .VOB files.
So, UDF read support is still in OSX 10.4.7 OSX has never had UDF write support except for iDVD.
I personally record movies from TV, legally. And my
solution to that problem is to create a Disk-Image,
that I burn on a data-disc, and I don't use
DVD-Player.
DVD Imager <http://lonestar.utsa.edu/llee/applescript/dvdimager.html> will create UDF disk image files from VIDEO_TS folders. When you burn these with Disk Utility they will play in standalone DVD players and in Macs. They will start Apple's DVD Player when inserted.
Toast can also create UDF disks.
If you create non-UDF disks (e.g. with Disk Utility), most standalone DVD players will not play them and Apple's DVD player will not start automatically when the DVDs are inserted. You can still play them with Apple's DVD Player by using "Open DVD Media" from its "File" menu and choosing the VIDEO_TS folder.

I just upgraded to 10...and now links and buttons black out when my cursor moves over them, and my entire window goes black whenever I scroll.

I just upgraded to Firefox 10 and had to go back to 3.6 because 10 doesn't seem to work on my computer. I have a windows 7 pc. After upgrading, whenever I moved my cursor over a button or link, that link blanks out or a black bock appears over it. Additionally, whenever I try to scroll, the entire window goes black until I stop scrolling.

Hi Nester88,
I'd try starting Firefox in [[Safe Mode]]. If you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit.
Hopefully this helps!

Ipod not recognized by windows and causes programs to crash

for some reason my ipod is acting weird. the other day it froze an so i restored it and it was working fine. now i connected it to my firewire (my ipod is a click wheel one) and when i hooked it up to my firewire to update on itunes, i noticed that like all of my windows that were open started to freeze including itunes. when i disconnected the ipod everything works fine. and now i cant restore the ipod because its not recognized by my computer. i put it in disk mode but when i hook it up to the firewire, it doesnt show on my computer and my programs freeze.
can someone please help me. i couldnt try the 5 r's or whatever because the ipod freezes when connected. and i tried http://discussions.apple.com/thread.jspa?threadID=461952&tstart=75
but it didint work cuz i waited like 10 minutes after hooking up my ipod and it stil was not being recognized.
please please help me someone
custom Windows XP

thanks for the info guys, ive never used my ipod on a mac (not that im aware of) and i would try using the usb but my computer does not have that 2.0 high speed usb thing so im forced to use the firewire. its weird cuz yesterday i uninstalled itunes and the ipod and when i installed everything, my computer recognized the ipod and it updated but now its doing the same thing again. dont nkow what the problem is? u guys think its the firewire?

How can I get a pdf. to open in Safari, all i'm getting is a new window with a black, blank page, instead of the pdf., and I don't want to save the file to the desktop, Safari didn't use to do that, and I don't have Adobe in the internet plug in folder.

How can I get a pdf. to open in Safari, all i'm getting is a new window with a black, blank page, instead of the pdf., and I don't want to save the file to the desktop, Safari didn't use to do that, and I don't have Adobe in the internet plug in folder.

Hi
Please take a look to this thread Re: Can I refresh the browser rather than open a new tab?

There's a black space at the top of my window, and when I open the browser, my home page comes up but the address line is blank. How do I fix this?

There's a black space at the top of my window, and when I open the browser, my home page comes up but the address line is blank. How do I fix this?

-> Tap ALT key or press F10 to show the Menu Bar
-> go to Help Menu -> select "Restart with Add-ons Disabled"
Firefox will close then it will open up with just basic Firefox. Now do this:
-> Update ALL your Firefox Plug-ins https://www.mozilla.com/en-US/plugincheck/
-> go to View Menu -> Zoom -> click "Reset" -> Page Style -> select "Basic Page Style"
-> go to View Menu -> Toolbars -> select Menu Bar and Navigation ToolBar -> unselect All Unwanted toolbars
-> go Tools Menu -> Clear Recent History -> '''Time range to clear: select EVERYTHING''' -> click Details (small arrow) button -> place Checkmarks on '''Cookies, Cache, Site Preferences''' -> click "Clear Now"
-> go to Tools Menu -> Options -> General -> When Firefox starts : select "Show My Home Page" -> Type the address of the website which you want to be your HomePage e.g. http://www.google.com
-> go to Tools Menu -> Options -> Content -> place Checkmarks on:
1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
-> go to Tools Menu -> Options -> Privacy -> History section -> '''Firefox will: select "Use Custom Settings for History"''' -> REMOVE Checkmark from '''"Permanent Private Browsing mode"''' -> place CHECKMARKS on:
1) Remember my Browsing History 2) Remember Download History 3) Remember Search History 4) Accept Cookies from sites -> select "Exceptions..." button -> Click "Remove All Sites" at the bottom of "Exception - Cookies" window
4a) Accept Third-party Cookies -> under "Keep Until" select "They Expire"
-> '''REMOVE CHECKMARK from CLEAR HISTORY WHEN FIREFOX CLOSES'''
-> '''When using the Location Bar, suggest: select "History and Bookmarks"'''
-> go to Tools Menu -> Options -> Security -> place Checkmarks on:
1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
-> Click OK on Options window
-> click the Favicon (small drop down menu icon) on Firefox SearchBar (its position is on the Right side of the Address Bar) -> click "Manage Search Engines" -> select all Unwanted Search Engines and click Remove -> click OK
-> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious Extensions (Add-ons) -> Restart Firefox
You can enable your Known & Trustworthy Add-ons later. Check and tell if its working.

My 27 inch imac has just started acting weird, the thumbnail images and folder on the desktop have disappeared although the titles are still visible. When I open a programme the programme windows are all black and the drop down menus just show random

When I tried to open the web browser the browser flashed black and white at start up, then all the applications when i open a new window are completely black, I am unable to view the drop down menus as the come out as random pixels. This happens to all new applications i have been able to open. The document window opens as plain white but if you click on it it opens a document even though you cant see any thumb nails. Some of the documents are open as normal images/files. Having been a mac user for 10 years i have never seen anything like this before, any ideas or suggestions

I have started running a virus check.
There are no viruses for OSX. Uninstall the software, repair permissions and restart your computer. Especially if it's Norton's. It's known to cause problems.
To rule out a hardware problem, run the hardware test: http://support.apple.com/kb/PH11342 OS X Mountain Lion: Use Apple Hardware Test and zapp the PRAM: http://support.apple.com/kb/PH11342 OS X Mountain Lion: Use Apple Hardware Test.
In the end you may need to lug your iMac down to your local AASP or an AS. Diagnostic testing is FREE!
i have had a mac in fact it is 17 years.
You got me beat by 3 yrs.

Windows 7 and/or Black Armor Discovery stopped recognizing my BA NAS 110

Similar Messages

Maybe you are looking for