Windows 7 and OSI model compatibility

Dear Community
Very kindly pleasant about information in theme Windows 7 and OSI model compatiblity
http://support.microsoft.com/kb/103884 ; Is this a same model in both examples ?

This forum is for helping visitors in writing software that interacts with Windows's user interface (namely Windows Explorer). 
I suggest you to get a TCP/IP book if you want to know how this model is applied on networking. 
Visual C++ MVP

Similar Messages

  • Question related to SFP, Fiber, and switches model Compatibility for Gigs Connections

    Hi everyone,
    I am in the middle of a project where we are receiving a 2gig Internet connection from a service provider. I need to connect this to a switch , my question is related to what sfp, switch would be the most compatible. I was thinking about a 3750 switch with sfp modules, but i am not sure if a SFP 1000 sx is enough as we are receiving a 2 gig connection via fiber then I would need to use a 10G module, with 10G sfps... mm well i am very confuse... can anyone help me please in your experience with a similar situation
    Thanks.

    Disclaimer
    The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
    Liability Disclaimer
    In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
    Posting
    A "2 gig" connection might mean a 10g logically limited to 2g, or it might mean the full duplex capacity of a gig link.
    The SFP+ ports on 10g 3750X modules will support either a gig or 10g transceiver.  The SPF ports, on either 10g or gig modules will only support gig.

  • Inquire about the best laptop specifications for Developing Windows Apps and 3D modelling Animation using "Kinect for Windows v2"?

    I need some help in choosing laptop that is most compatible with "Kinect for Windows v2"; in order to develop Windows Apps, and 3D modelling Animation and Character Design. Which is better (Specifications):
    HP Pavilion Notebook PC 15-p150ne 
    AMD A10-5745M +
    AMD Radeon R7 M260 (2 GB DDR3L dedicated) +
    4 GB 1333 MHz DDR3, OR
    HP Pavilion Notebook PC 15-p034ne 
    Intel Core i5-4210U + NVIDIA GeForce 840M (2 GB DDR3 dedicated) + 4 GB 1600 MHz DDR3L

    The second system with the Intel chipset will more than likely have the Intel USB3 chipset required for Kinect. As for GPU they are similar, but the i5 with DDR3 1600MHZ ram is a better option. Keep in mind, if you are doing anything in-depth for
    3D, a laptop isn't the best options, but if you have to go mobile then you have to decide what is best for your requirements.
    Carmine Sirignano - MSFT

  • When will Windows 7 and IE 8 compatability roll out?

    If you look at this thread 'Xcelsius 2008 Fix Pack 3.1 (FP3.1) is now available'  there is a "upcoming major Xcelsius release" mentioned but no dates or timelines.  When is this going to happen and will Windows 7 compatability be part of that release?  I have customers right now that want to know, if they integrate some Xelcius dashboards into our web application, will this work in Windows 7 and IE 8.
    I also noticed the expiration notice on 2008 Engage Server going away.  I have Xcelsius 2008 Engage (not the server version).  What is the estimated life cycle on it in light of the Server version going away next year.
    P.S. I am aware of the XP compatability mode in Windows 7 but I have a hard time believing SAP would consider that a permanent solution.

    Hi Matt,
         I understand you can't give any detailed timelines yet, as I can only assume you guys are still early in the development cycle for some of the fixes and updates required for Windows 7 and IE 8 compatibility.  My problem is I have customers that want a reporting solution integrated into the web application my company provides as a product.  We want to sell them on the idea of buying Xcelsius licenses and developing their own metrics reports that would seamlessly integrate with our application and we provide an API for them to do that right now.  It becomes a pretty tough sell when they ask about Windows 7 and IE 8 compatibility and I can't really tell them anything definitive other then  "I think SAP is working on that?".  Its not like were talking about an obscure OS and browser, this is Microsoft after all and its my understanding they have a bit of a following    .  I would, at the very least, like to be able to confidently tell my customers that SAP is commited to making sure Xcelsius 2008 Engage (or what ever the next version name is ) will be fully compatible with Windows 7 and IE 8 and that the long term plan is the end of this year? middle of next year? some other non-ridiculous time frame so I can assure them its not a waste of time waiting for this product to be updated?
         You mentioned any SWF files we create (at least it was implied) should run as long as Flash Player 9 or later is installed? Is that truly the case? The reason I ask is the Adobe web site says the Flash Player 10 is compatible with both Windows 7 and IE8.  Is the only issue driving this compatability problem the version of the Flash Player installed, or are there still some pieces of Xcelsius that need to be rewritten to accomodate Windows 7 and IE8 regardless of what version of Flash Player is resident?  Bottom line is what can I tell my customers to reassure them this is the correct path forward for their reporting needs?
    Thanks,
    Matt
    Edited by: mathiasX on May 5, 2010 1:29 AM

  • Should I expect any compatibility issues by working partly under Windows and partly under MAC OS?

    Apologies if this point was already raised but could not find the answer.
    I am considering the creative cloud in an environment where the same files will be worked within windows and MAC environment.
    Should I expect any compatibility issues or difference with such a setup.
    thanks in advance.

    Hi JLCbac,
    Files do support cross platform workflow, however, there are certain limitations to it.
    Kindly refer the below mentioned links for more info.
    Link 1 : Adobe Premiere Pro Help | Cross-platform workflow
    Link 2 : Re: Mac-made PSD can't open on Windows
    Thanks,
    Atul Saini

  • Windows and AMD 64 X2

    Hi
    I don't really know if I can get away with posting this here, but this is the only forum I know where people are technically competent enough to help me out. Recently I've put together my own computer, I had a few issues to start off with but then everything worked fine. However one day when I loaded Windows it said "new hard ware found", then something along the lines of "x64 based processor found" and "multicore processor detected and installed" followed by "new hardware installed but may not work until computer is restarted".
    So I though, o..k, and restarted the computer, when I did I checked my performance panel in windows and noticed it was no longer detecting my 2nd core. After reading about on this forum for a bit I messed about with drivers, installing them, uninstalling them, updating them, rolling back them and finally I got it to work again. However windows did the same thing again a few days later (today in fact) and now after messing about a lot I've not been able to resolve the issue at all. Can someone please help me out or point me in the right direction to get help.
    -Motherboard type and model (MSI K8N Neo4)
    -Bios (1.6)
    -CPU type and model (AMD Athlon 64 X2 3800+)
    -Memory quantity (2 x 1 GB)
    -Video card name (nVidea 6600)
    -Hard Drives: 200GB IDE0 they are located on
    -Optical Drives: Samsung IDE1 and IDE2, DVD writter and DVD reader
    -Windows XP Pro x64 SP1 (equivalent to SP2 for most XPs)

    Quote from: utwo229 on 10-September-05, 00:43:49
    I assume you are using the performance monitor in the task manager. Under VIEW.....CPU HISTORY you should get the option to display ONE GRAPH ALL CPU's or ONE GRAPH PER CPU. On a single CPU system it only gives the option ONE GRAPH PER CPU. This may help determine if windows is in fact not seeing the second processor.
    I already knew that thanks, I also had AMD Power Monitor running which doesn't have this option and just shows however many cores are running. O.K, the problem seems to have kind of  gone away and I don't know why...
    But thanks for the help, if I figure out why it's working again I'll post it to hopefully help other people.

  • Maximize Windows and close applications

    After trying to find a person to speak to, i had to gave up and now try in this forum.
    Is there no way to ask a question to apple?!?
    I mean, sending an email?
    Even did everything to get into phone-contact, but only after i did everything, i learned that this is only available in the USA and canada
    OK, here are my questions:
    I am in dire need of two things:
    1)
    If i click on the "Zoom" Button on an application, it shall MAXIMIZE, taking up all room available beside the space needed for the upper menu bar and that was is needed for the dock (if it is visible).
    2)
    When i close the last windows on an application, it shall close the application!
    How can i accomplish that in Mac OS X?
    Does anybody know?
    Could anybody hint to be a mail-address, where i could ask this question?
    Thanx a bunch!

    1) If i click on the "Zoom" Button on an application, it shall MAXIMIZE, taking up all room available beside the space needed for the upper menu bar and that was is needed for the dock (if it is visible).
    That's not how Mac OS X works (at least by default), and isn't what most people want anyway, it's just what they are used to in Windows and stems from a time past where users typically did one thing (or at least only ran one application) at a time. It made sense for that application to use all the screen.
    That is no longer the case in modern operating systems where users may have many applications running at once, and benefit from being able to overlay applications.
    It's even more true when you look at modern applications with their myriad of toolbars, palettes, etc. - you need to be able to position the document windows independent of the user interface elements.
    And it's yet more true when you look at modern hardware options like a 30" display. There is no way it is practical to zoom a web page, for example, to fill a 30" screen.
    Instead Apple's model leaves it to the developer to determine what the optimal size is for their windows. For a page-creation application (e.g. word processing, desktop publishing, etc.) it makes sense for the document window to size relative to the page being created. For a graphics application such as Photoshop it makes sense for the window to size based on the image being edited, and for a web application such as Safari it makes sense for the document window to size based on the web page you're viewing. In most cases, none of these make sense to fill the screen.
    Now there are cases where it is valid to fill the screen such as presentations and kiosks, but for these you typically need applications designed for such purposes (e.g. Keynote or PowerPoint for presentations) but it is still the responsibility of the application to set its view accordingly.

  • Okay, i have 2 bugs with maverick.  First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it.  Second, I work on a network of computers and the search feature is now buggy...

    Okay, i have 2 bugs with maverick.  First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it.  Second, I work on a network of computers and the search feature is now buggy...  When I search for a file, A) it asks me if it's a name, or it wont produce anything, and B), its slower than in prior OS versions and in some instances I have to toggle to a different directory and go back to my original directory in the search: menu bar or the search wont produce anything...  Very buggy. 

    It appears to me that network file access is buggy in Maverick.
    In my case I have a USB Drive attached to airport extreme (new model) and when I open folders on that drive they all appear empty. If I right click and I select get info after a few minutes! I get a list of the content.
    It makes impossible navigate a directory tree.
    File access has been trashed in Maverick.
    They have improved (read broken) Finder. I need to manage a way to downgrade to Lion again.

  • How can i install a windows version 8 on a 3 year old iMac 27 (only windows and nothing else not via bootcamp = result shut be a clean iMac with windows - no

    When i now had recieve a brand new 27" imac, i had a 3 year old model 27" imac which my daugter want to have BUT i should be as a clean Windows thing -
    so how to change the computer to a clean windows 8 computer with no apple programs in and no Maverick or other lovely programs?
    I had seen on the net that a lot of peoble had windows with bootcamp - i am not a computer tecnician and when i try - i end op with a machine with could nothing - no mac programs - no office pack - no adobe programs - so i had to start op again with a new harddisk.
    Some of the problem is that i dont understand the thing which bin told when you go to bootcamp for a user of mac's since the model was the "classic" and we make newspapers on them - so i want and easy way to have and mac computer for my self (the new one) and let my daugter have a beutiful imac with windows on.
    dont begin talking about parrelles i had try that, results it had a windows 7 which cant be updated, apple dont support that and microsoft doesnt  so - help me
    regards
    Chevron B50

    If you don't want Boot Camp and you don't want a virtual machine, go buy a Windows computer.
    Both Boot Camped Windows and Windows running in a virtual machine work well. Your issues are because of your lack of knowledge or understanding, not because Boot Camp and virtual machines are poor products. Universities, large and small businesses, home users, etc. use virtual machines to run their operating systems.
    Your statements about Boot Camp and Parallels are not the experience of thousands of users.
    Either find someone who is knowledgeable about running Windows on Apple computers to help you or buy a Windows computer. Believe me, if you find a way to install only Windows on your Apple computer without using Boot Camp or a virtual machine you will have more problems than what you have already experienced.

  • Airport utility is not working on Windows. I can configure Airport Expresses with the Macbook but multiple computers with Windows and the latest Airport Utility time out after trying to connect to the router for setup.

    I have been trying to setup Airpot Expresses (both old and new models) for a while now with the Airpot Utility 5.6.1 for Windows without any luck. I have tried this on multiple windows machines, factory reseted the devices if I needed to, but I have not had any success since this software arrived. I see the routers on the Airport Utility UI, I click on it then try to connect to set it up. At this point, it gets stuck with a long progress bar trying to connect to the device without any success. I also have a Macbook Pro, and this device & software has had no trouble setting up the routers. The problem is, we are shipping these small routers out to customers who use Windows machines and it is vital that the user can modify the settings using Airpot Utility. I am at a loss for what to do and if we can't find any solutions, we are going to move on to a different company for the routers we ship out.

    Thanks a lot i followed the instructions for safe mode (i found out that i was pressing the C button after restarting) i did whats written there but the repair couldn't be performed so in addition i needed to re-formate the HD so i erased the volume and then repaired the disk--> quite disk utilities --> start the installation from the installation DVD.
    Thanks really appreciating your help

  • Difference in performance of SBA between Windows and Unix

    Hi,
    I am using a  MSF routine which uses SBA to recursively search a sysbld suprerblock and its children to find a specific type block (in this case a ucb). It works fine on both Windows and Solaris Xmath. However, for very large models, there is a huge performance difference. I ran the algorithm on a model containing around 1000 superblock and 10000 blocks. Under Solaris (7.1.5) it takes around 30 seconds while under Windows XP (7.1.6) it takes more than 8 minutes.
    Any thoughts on the reason behind this difference.
    Thanks
    Farshid
    P.S. The MSF file is attached
    Attachments:
    finducb.zip ‏1 KB

    I'm aware I may get some flack for this statement.^^^Some. <grin>
    I'll give you the counter-argument. Those Unix shops with incredibly stable environments? Have you done a count of actually used applications? The ones that mimic the business' current needs? The ones that reflect the business', uh, business? Perhaps it's just the clients I interact with, but those often have a mixture of "dead" apps in with the live ones. I rarely see that with Windows and yes, the app count is sometimes crazy high on the Unix side -- certainly beyond what EAS can comfortably navigate (I was on a 9.2 environment once that had 200+ apps -- Shared Services was essentially broken at that site, but so was 9.2 in general.)
    Anyway, I've observed that IT tends not to do a terribly good job of producing flexible analytical applications. They are very good at stability, sustainability, security, and all sorts of other things Essbase (and other, especially transactional) environments must have. Until they become fossilized in their SOPs, their policies, and their requirements. At which point a different transformational technology that the business can control pops up -- heard of TM/1 lately? I am super curious (for all kinds of obvious reasons) to see where my beloved Essbase ends up in a few years.
    I'm not coming down on either side, just saying that I've seen this play out multiple times since the mid-1980s. While both sides have their merits, at the end of the day, if a super well maintained environment is just a monument to IT's ego, it's worthless. And yes, I have seen Windows environments that are just that.
    Regards,
    Cameron Lackpour
    Edited by: CL on Jul 12, 2011 9:54 AM
    Smiley faces no longer work. Why oh why oh why?

  • Dual-Booting Windows and Android on Yoga Tablet 2 13?

    So I am a big fan of the lenovo yoga tablet so I started looking into the new versions of the tablet and I came upon something curious. both the yoga tablet 2 pro and the yoga tablet 2 13 (windows)  have the same processor (a 64-bit processor) as well as very similar technical specs(the main difference being the windows edition has 4GB of ram instead of 2GB and a larger battery no doubt due to the removal of the integrted pico projector). as well Lenovo has the source code for the android build in the pro available on the website.
    So my question is if both are running off the same 64-bit processor is there anything stopping someone from compiling the yoga 2 pro source code and installing the yoga 2 pro android OS onto the Windows version of the tablet (dual-booting both) aside from secure boot needing to be disabled?
    after scouring the internet and asking a few lenovo representatives I have found absolutely no information on this (the lenovo reps I spoke to couldn't even confirm the specs of the processors but I found that data from the intel ark database) and it is something I really would like to do if possible (especially with android 5.0 having x86 support integrated in the vanila build)
    So anyone have any information on anyone trying this or something similar being attempted?

    so, lenovo putted a really bad bios on thoses tablets.
    http://forums.lenovo.com/t5/Windows-based-Tablets/Alternatives-OSes-and-CMS-under-Yoga-1051/td-p/190...
    To make it short, the uefi bios used on yoga tablets support only x86 so, the x86-64 instruction set can't be used, on windows. Without CSM (compatibility support module) you can't even try to boot some oses. For linux you need to mod it, i'll try later but, i can't build a new bios and lenovo is not present on this board

  • On my G5 mac at work, I am getting - don't know what to call it - looks like extraneous matrix type code around prompt windows and in applications. Sometimes I will get large shapes of colors, yellows, magentas, cyans. Anyone else experience this?

    On my G5 mac at work, I am getting - don't know what to call it - looks like extraneous matrix type code around prompt windows and in applications. Sometimes I will get large shapes of colors, yellows, magentas, cyans. Anyone else experience this?
    I will attach a recent screen shot of a print window I opened and the extra code is above and below the window. There are matrix type blocks of code and then lines under the window. I get this all the time and it is getting worse.
    Any help to get rid of it would be appreciated.
    Thanks
    TatteredSkull

    It's likely the Video card, or possibly heat.
    At the Apple Icon at top left>About this Mac.
    Then click on More Info>Hardware and report this upto *but not including the Serial#*...
    Hardware Overview:
    Machine Name: Power Mac G5 Quad
    Machine Model: PowerMac11,2
    CPU Type: PowerPC G5 (1.1)
    Number Of CPUs: 4
    CPU Speed: 2.5 GHz
    L2 Cache (per CPU): 1 MB
    Memory: 10 GB
    Bus Speed: 1.25 GHz
    Boot ROM Version: 5.2.7f1
    Get Temperature Monitor to see if it's heat related...
    http://www.macupdate.com/info.php/id/12381/temperature-monitor
    iStat Menus...
    http://bjango.com/mac/istatmenus/
    And/or iStat Pro...
    http://www.islayer.com/apps/istatpro/
    If you have any temps in the 70°C/160°F range, that's likely it.

  • Slideshows which work for Mac, Windows AND ipads/iphones???

    Hi.
    My first post here & just getting into mac after many decades of windows!!
    After much searching around I have finally found a place (Yola) where I can design a website which is compatible with all browsers/mac/windows..hurray.
    However, due to the type of work that I do I need to display 50 photos (before/after). I want to do this with a slideshow. I have made up around 8 from different sites but each time there's a compatibility problem with ipads or iphones (but no problem with mac/windows/nokia smartphone).
    Is there a slideshow (FREE) which will work across all platforms? Is iphoto the only way - and will that work with windows and is there a free version.
    Finally, the website design software uses 'widgets' to place code into the site for photos/slideshows etc etc.
    Any help would really be appreciated!
    David
    PS Hope to be getting an ipad soon.

    come on guys, someone here must play some games on their intel mac?
    please help me make my mind up

  • DM3.0 EA2: Filter engineering changes between logical and relational model

    Hi,
    when I am engineering changes between logial and relational model there are some issues at filter handling for me:
    - When the filter "Show Modified Objects" is activated, the filter works only on the first level, e.g. on Entity level. On attribute level all attributes are displayed, not only the attributes which have really been modified. It is possible, to show on every level only the really modified objects?
    - I think, selecting a Filter condition is circuitous. All filter conditions except "Show All Objects" keeps activated when I choose another condition. So I have to deactivate "Show Deleted Objects" when I want to see only the modified objects. It is possible to choose another control element for filtering, e.g. disjunctive radio buttons?
    I am running Data Modeler on Windows XP with german localization and the JDK 1.6.0_11 from Oracle SQL Developer.

    I logged bug for that.
    Philip

Maybe you are looking for