Windows 7 and T-400 and docking

I just installed windows 7 beta on my t400, and now I'm  unable to connect to my external monitor via a mini docking station. I also don't see ATI catalyst. How do I go about repairing this?
Thanks,
Kurt

Hello @turingtest2.
Following your threat I realized it was time to have my hard drive changed. My iPod classic has a Samsung Model: HS081HA, 80gb/3600 rpm (real hard to get it open and check out!!!).
My question is if I DO HAVE to buy exactly the same hard drive, or I could get away with another manufacturer and model, such as Toshiba (80 GB MK8009GAH FOR iPod Video 5th 5.5th iPod Classic 6.5th 7th Gen Hard Drive - Ebay listing)?
I ask you that as these Toshiba hard drives are considerably cheaper.
Help much appreciated.

Similar Messages

  • Fine tune ML so windows do not enlarge and dock stays visible

    I need to simplify ML for non-literate user so windows do not enlarge and dock stays visible instead of disappearing.  If I need to install Snow Leopard i will, I am DESPERATE to avoid these phone calls from MOM IN LAW everyday.

    Windows will enlarge if the user clicks the green button or the icon to put the app into full-screen mode (I'm presuming this is what you're referring to) and I don't know of any way to block either. Not meaning to seem snide, but perhaps your mom just needs to learn not to click those buttons.
    For the Dock, all you have to do is go to the Dock system preference and turn off "automatically hide and show".
    Regards.

  • I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows 8?

    I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows

    Hi, stig2013. 
    I would recommend the steps in the article below.  See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If you are receiving an error message, find the exact error number that you recieved in the article below and process the steps. 
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    Cheers,
    Jason H. 

  • Dual Boot windows 32bit and 64bit overclocking problems

    Im pretty new to overclocking and this is my first try I manage to get my AMD Venice 3200 to hit 2500 with 250fsb X 10, HTT 4, vcore 1.44. I used memory divider 166/200 so the memory is running at 208MHz not alot of overclocking on the memory since it is some cheap brand.
    My problem is that I have dual boot and with windows xp everything is fine CPU-z reports the right speed for the cpu and memory when I overclock, and there is an increse in preformance with overclocking, But when I boot windows XP 64bit CPU-z reports the FSB as 200 so it is not showing any change, it does report the change in the memory divider 166/200 and the cpu voltage increased that I applied to overclock. The thing is that when I open systerm properties it shows the CPU speed as 2500MHz but when I test the preformance there isnt any increase. I used Superpi to test preformance and in windows XP 32bit it finishes the 1M test in 36seconds while in Windows XP 64bit it takes 42seconds.
    My system specs are
    AMD Venice 3200
    MSI K8N Platium bios 1.8
    1024MB Wintec Memory 3200
    Geforce 6800 GTO 400/1100
    OCZ ModStream OCZ52012U 520W Power Supply

      Im runing the final release of Windows xp 64 and cpu-z 1.30, I also have Everest Ultimate Edition and it only shows 3% overclock 205 FSB.  Im thinking of formating the HD with windows 64 and installing it again with the systerm already overclock.

  • Window resizing and how to keep the window at that size.

    Having trouble with the applications window not staying the same size after I resize it. I know that dragging the corner will resize as well as the green button, but after I close it, it reverts back the small window and not to the resized window after I have done the above. Went to an apple store and no one there knew how to fix it or maybe I didn't explain myself very well.

    I assume you're opening the Applications folder in a separate window through an alias or a Dock icon... if so, just open it, move and resize it the way you want, then immediately close it again. That should do the trick.

  • Thank you all for the responses. By process of elimination, I think the problem is the connection to the express in between the extreme and dock. I bought another express and tried it at dock, no luck, I then replaced new express where the one is between

    I have an airport extreme and express setup. My extreme is in my 2nd floor office with windows facing the water. My dock is about 250 ft away down a very steep hill. I have the express about 100 ft down the hill in an electrical waterproof box attached to a tree as high as I could install. The signal is weak and I'm thinking I might have to buy another express. Any thoughts on the best setup for me. I ultimately want to control speakers(hard wired in) down at the dock with my iphone. I have a receiver coming with airplay built in.
    Thank you all for the responses. By process of elimination, I think the problem is the connection to the express in between the extreme and dock. I bought another express and tried it at dock, no luck, I then replaced new express where the one is between extreme and dock, no better. I unplugged the express between extreme and dock and there was no difference. So I believe I am connecting to the airport express or extreme that is inside the house. Again because when i approach express that is halfway I reconnect. so if you can understand my chaos, I believe the express in between is not really connecting to the extreme inside my house. Yes, No? So I need to know how to know if the express half way down the hill is getting the connection from the the extreme in the house. This is wearing me out!!!!!

    You are asking several different questions. If you need to store your photos, music, and movies on an external volume, you certainly can. Any externally connected hard disk drive will work, connected either directly to your Mac or to your Time Capsule as a shared volume.
    You should not rely upon using that as a backup device though. Although you certainly may use it for both purposes, it is a better idea to have dedicated backup devices for a variety of reasons not limited to redundancy. You would not want to simultaneously lose all your pictures as well as your backup. If they are all on the same device, that could happen. Furthermore, a backup cannot back up the volume on which it is running.
    As for adding an Extreme or Express, using its LAN port for your iMac, and then enable Internet sharing so you can effectively use the iMac as a "hotspot", you can do that too, but I am unclear on what benefit you believe this arrangement would convey for you.
    An Extreme's Guest network is separate from its Main network; that is the reason for having it.

  • Main screen and dock move to second display

    Hi all,
    although i found many replies regarding to how to get the dock to the desired screen i face the following problem.
    I am a vj/dj using serato dj, mix emergency and madmapper. Whenever i connect a second display to my macbook (macbook pro early 2013 retina, now on OS 10.9) the main screen and dock is transferred to that second display (e.g. projector). These softwares need to run to the main screen only, and this should be my laptop's screen.
    Even if i get the dock back to my macbook display, these softwares recognise as MAIN display the external one and not my macbook pro's display.
    I am facing this problem since my OS upgrade to 10.9 from 10.8!
    Can i do something to my macbook so as to always recognise its own display as the main display? Does this problem exist on Yosemite as well?
    Can i downgrade to 10.8 if all the rest fail?
    Regards

    Hi konstadinos.k,
    I understand you want your MacBook Pro to be the default display for your DJ software when you have a second display connected to it.  Take a look at the article below that explains all of the options for extending or mirroring your displays. I've highlighted some key information below that may be helpful in your situation.  Even though the article is for Mavericks, the info should still be applicable.
    OS X: Using multiple displays in Mavericks - Apple Support
    http://support.apple.com/en-us/HT202780
    You can also assign an app to a specific display space from the app's menu in the Dock. Windows assigned to a space always open there when the display you specified is connected.
    The blue boxes in Displays preferences represent each display that's connected. The size of each box is relative to the current resolution of each display. In this example, the smaller box on the left is the display of a 13" MacBook Pro while the larger box on the right represents the Apple 27" Thunderbolt Display.
    Drag any of the blue boxes to change the location of a display in relation to your additional screens. You can use this feature to make sure your connected displays match their real world location when navigating windows. The white bar at the top of the blue box represents the menu bar. Drag the white bar onto the blue box representing the display you want as your primary display.
    Hope that helps ...
    - Judy

  • Disappearing Tool Bar and Docking Bars

    While using Mail, my toolbar slides away, as does my docking bar.  I can't seem to find anything in Preferences to correct this.  Help!
    Thanks.

    Application is in Full Screen mode.
    When an Application is in Full Screen mode, Menu bar, Toolbar and Dock will be hidden.
    Move the cursor to the top and click the blue double arrow icon to get back to the normal window mode
    or press esc key at the top left corner of the keyboard.
    Clicking the gray double arrow icon at the top right corner of the window will make window Full Screen.
    http://support.apple.com/kb/PH11941
    Best.

  • Finder Window Sizes and View Options

    In an earlier message under Mac OS X Panther it was recommended that I post a new message in the AppleScript forum.
    I'm looking for a way to automate the repetitive task of resizing Finder windows and resetting view options. For example resetting a hundred folders to the same window size and screen position with the same view options. This requires manually adjusting each window one by one.
    A solution could be an AppleScript that would automate this task.
    The following is the earlier message:
    http://discussions.apple.com/message.jspa?messageID=1283081#1283081
    I mistakenly deleted all the preference files for the Finder window options on my 17 inch PowerBook (.DS_Store Files).
    This has returned all Finder windows to default settings for window sizes and view options.
    I use custom widow sizes for all my folders that nicely fit the 17 inch screen on my PowerBook, leaving enough desktop space on the right for the hard drive icons and the Dock that I always keep vertical on the right.
    I have a 12 inch PowerBook as well. And it has it's own custom window size that fits it's much smaller screen. It has always been a complaint of mine to have to manually reset windows whenever I needed to transfer folders with Bluetooth file exchange.
    Resetting Finder window sizes and view option has always been a time consuming problem. Now to have to do it over again for hundreds of windows is a huge task that is way to manual.
    The Finder is customizable. There must be a way to set the options for one window and be able to use those adjustments for other windows without having to re adjust each setting manually.
    There was an application called Finder Window Manager. Maybe someone knows of another application that can do this of task or another way around this issue.
    Photoscene
    Powerbook G4 17 inch   Mac OS X (10.4.3)   Tiger/Panther

    Photoscene,
    I think if you repost this to the AppleScript link, someone there will have a solution for you (in the form of an applescript that you can run)...
    http://discussions.apple.com/forum.jspa?forumID=724
    Give it a shot (I'm not clever enough to give you a good script yet, but someone there will be!)
    Bob

  • "The iPod software update server could not be contacted. The Server does not support this version of iTunes." Any thoughts? Also, iPod will not turn or or charge (tried in my laptop, house computer and dock) I have all the lastest updates to my knowledge

    "iPod software update server could not be contacted. The Server does not support this version of iTunes." iPod will not turn on or charge or reset settings. I tried plugging it in my laptop, house computer and docking station to charge and nothing. Also, I have all the latest software updates to my knowledge. This is a classic 8GB iPod, running of Windows 7. Any thoughts/suggestions?

    only thing that seems to work so far is syncing without photos and also check here https://discussions.apple.com/thread/3206849?start=30&tstart=0

  • Not able to see menu bar and dock after maximizing.

    Prior to installing Yosemite, maximizing a window left the menu bar and dock visible; with Yosemite they are no longer visible.  How do I reset this?

    Moving the mouse pointer to top or bottom of screen (assuming menu at top and dock at bottom), should display them.
    Or, Control/Command/F   combination.

  • Windows XP and ICH5R SATA RAID 0

    Ok, I have searched and not found any answer so I need to ask a question.  I have a new system that I believe I set up with 2 Maxtor 120 Gb drives in RAID 0, but they don't seem to be doing what a RAID 0 grouping should.
    The drives are on the ICH5R and the CTL I BIOS shows them enabled and in RAID 0, the drives did show up and were recognized.  Windows XP Pro shows them as drives that make up 240 Gb Raid grouping in the drive management utility but it shows them graphically as two drives and it has a letter assigned on another line to the second drive.  As far as I can tell they have been set up right but they are being treated as two seperate drives.  Again, to clarify, I see a line for drive D that says it is a RAID grouping of 224 Gb (the 120 shows as 114 available) but there are two boxes on the line both showing as healthy with the second showing as healthy and active.  On another line it shows drive E (the second 120) with 114 Gb available showing as healthy and active.
    I thought it was just a graphics/explorer glitch but I have loaded a large group of data to the primary drive of tje grouping and the second drives still shows as having all the space free.  The graphical display (right click on the drive and click properties) shows that space is being used in the first drive but the second drive is empty.  There do seem to be a few files that are on the E (second drive) but they seem to be some sort of configuration files and only take up about 18 Mb while I have put files totalling about 10 Gb on D drive (and they show as taking up that much space but only on D).
    Yes, I know that they are Maxtor's and other have had problems with them but mine seem to be working fine (as hard drives being recognized by Neo FIS2R) it just seems I may have done something wrong in Windows.
    My question is what have I done wrong (if anything) and how do I fix it?  The BIOS seems to recognize the drives correctly, Windows seems to know about the drives as a RAID array but data is not getting striped.  
    Thanks for any help.
    P4 2.8Ghz not overclocked
    Geil 1 Gb Dual Channel Ultra PC 3200 (400 Mhz) not overclocked
    875P Neo2-FIS2R, BIOS version 1.8
    ATI Radeon 9600 Pro (128Mb) no OC
    Antec Truepower 430W (Antec 1080AMG Case)
    Maxtor 80 Gb IDE (Primary Channel/Master) - Runs Windows
    2 Maxtor 120 Gb on ICH5R(SATA), RAID 0
    Sony DVD Rom (Primary Channel/Slave)
    Sony DRU510A Writer (Secondary, Master)
    TDK VeloCD CD/RW (Secondary Slave)
    WinXP Pro + SP1 + all latest Windows Updates
    BIOS - enable USB, 1394 and ACPI.
    BIOS setting for RAID under "On Chip IDE Config" is:
    Native, SATA Only, SATA enabled=Yes, PATA enabled =Yes,
    PATA Channel Selection=Both, Configure ATA as RAID=Yes

    I did put in the drivers (from the included floppy) during the windows install and I ran the intel RAID accelerator.  Drive management in Windows seems to recognize that it is a RAID grouping.  I actually had to go back and reload Windows because I did not do that the first time I installed it.  Before it would not recognize the drives at all.
    So you two are thinking I need to start all over again and install windows (format the drives)?  I just got everything working and recognized so this is not what I would want to do if there is an alternative.
    P4 2.8Ghz not overclocked
    Geil 1 Gb Dual Channel Ultra PC 3200 (400 Mhz) not overclocked
    875P Neo2-FIS2R, BIOS version 1.8
    ATI Radeon 9600 Pro (128Mb) no OC
    Antec Truepower 430W (Antec 1080AMG Case)
    Maxtor 80 Gb IDE (Primary Channel/Master) - Runs Windows
    2 Maxtor 120 Gb on ICH5R(SATA), RAID 0
    Sony DVD Rom (Primary Channel/Slave)
    Sony DRU510A Writer (Secondary, Master)
    TDK VeloCD CD/RW (Secondary Slave)
    WinXP Pro + SP1 + all latest Windows Updates
    BIOS - enable USB, 1394 and ACPI.
    BIOS setting for RAID under "On Chip IDE Config" is:
    Native, SATA Only, SATA enabled=Yes, PATA enabled =Yes,
    PATA Channel Selection=Both, Configure ATA as RAID=Yes

  • Can't change back to white menu bar and dock

    When I uncheck the box, it just stays with the dark menu bar and dock.
    How can i make it change again? I'm running the latest version of Yosemite 10.10.2
    http://i.imgur.com/dlXyyUt.png

    Do a backup.
    Quit the application System Preferences.
    Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J.  When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder.  Select Library. Then go to Preferences/com.apple.systempreferences.plist. Move the .plist to your desktop.
    Restart the computer, open the application and test. If it works okay, delete the plist from the desktop.
    If the application is the same, return the .plist to where you got it from, overwriting the newer one.
    Thanks to leonie for some information contained in this.

  • Disable window resizing and lock them?

    Is it possible through a prefernce or maybe an application to disable window resizing and lock their positions. I let my friends and family use my computer and they always move stuff around and resize everything. It really annoys me and I hate having to adjust everything to the way I like which I have spent hours setting up so they can just destory in a matter of seconds. I know I can setup a guest account but I don't have the memory or processing power for it since I usually have about 3-5 applications always open. I would also I like to steer clear from that route if possible. Thanks for any help on my issue! I did try searching to no avail however if this is already been discussed I appologize and a link to the discussion would be appreicated.
    1.42Ghz G4 Mac Mini   Mac OS X (10.4.8)   ATI Raedon 9200, 256MB ram, Model number: A1103

    The setting up and use of a guest account will not affect the memory or processing power but will use some of the hard disk space depending on how much stuff you allow your guest user(s) to save.
    You can easily set your favourite apps to load when you login again by clicking and holding on the app icon in the your Dock before you setup the new account - a pop menu appears. The advantage of having a separate account is that if you set it up as a non-administrator account the guests would not be able to screw up things too much, where as at present they could cause havoc.
    chris

  • I install window 8 and Unfortunatly all drive format. And all drive mix, now i have only 1 DRIVE C. I want Bit locker Drive's data Back

    Last sunday i install a window 8 and this window format my all drive & make it 1 drive (DRIVE C). Before all of this i have 5 drive in different size with 1 Bitlocker protect drive.
    So i try data recovery software to recover my data. i got back all my data without that ( bitlocker ) protected drive.
    so please guys help me how can i get back data from bitlocker protected drives.
    please please help me.

    Hi,
    I sorry for your experience, but there is no way to recovery the data encryped by BitLocker untill now.
    BitLocker is designed to make the encrypted drive unrecoverable without the required authentication. When in recovery mode, the user needs the recovery password or recovery key to unlock the encrypted drive. Therefore, we highly recommend
    that you store the recovery information in AD DS or in another safe location.
    Please refer to the link below for the statement:
    http://technet.microsoft.com/de-de/library/ee449438(v=ws.10).aspx#BKMK_RecoveryInfo
    Roger Lu
    TechNet Community Support

  • A hardy ghost of Firefox is apparently running in my computer and I am unable to open Firefox, even after Window restarts and an uninstall/re-install. How do I find and fix this problem?

    What happened first is Firefox was revving and using most of my CPU, ultimately "not responding" too easily and for too long, so I closed it in order to reopen it, but Firefox remained running in background (Task Mgr, Processes) after closing, continuing to use almost all my CPU, so I ended the process in Task Mgr.
    When I went to re-open it, window opened and told me Firefox could not be opened because another "instance"(?) was still running, to close it or restart Windows. I couldn't close it because I already closed it AND ended the process, so I restarted Windows.
    When I tried to open Firefox, I got the same pop-up. I think I restarted Windows one more time, and then uninstalled Firefox, except for my personal settings (in order to save the bookmarks, which I couldn't find in the Firefox folder in Program Files (only Favorites, which were not my bookmarks; I later wondered if they were part of the Firefox add-on "Add This" --??).
    I then uninstalled Firefox and re-installed it. When I tried to start the newly re-installed program, I had the same pop-up telling me Firefox was already running and to close it or restart Windows.
    I searched my computer folders for anything that might help, did a Search of the computer for "Firefox", and was given some Firefox folders and if they weren't from the new re-install, I deleted them. One thing I noticed was that the program folder did NOT have the program (Firefox.exe) icon to start Firefox.
    I uninstalled Firefox and had to resort to using Internet Explorer, which I do NOT like. My rich library of bookmarks are who knows where.
    I don't know if this is related, but in searching my computer's Administrative Services and Component Tools (and the like) hoping to find something that would help me fix Firefox, I inadvertently learned that "MMC could not create the snap-in. The snap-in might not have been installed correctly. Name: .NET Framework 1.1 Config."
    Please help me get Firefox back and figure out what is going on in my computer that led to this. I am a basic user and not techno-computer saavy, so if anyone can help me with this, please give me step-by-step bonehead instructions.
    Thank you so much for any help you can offer!

    Make sure that Firefox is set as the default browser.
    *http://kb.mozillazine.org/Default_browser
    *https://support.mozilla.org/kb/How+to+make+Firefox+the+default+browser
    *https://support.mozilla.org/kb/Setting+Firefox+as+the+default+browser+does+not+work

Maybe you are looking for