Windows 7 and the W500

Not sure what the latest info is with regards to Windows 7 and the W500 but today I reinserted my 160GB hard drive and installed Windows 7 Pro x64 (RTM) on it, I was surprised to see that everything except for the modem driver, figerprint, and audio driver would not install.
That's right even the ATI driver installed with the control panel under Windows 7. Woohoo!
I am not too worried about the fingerprint reader at this point as I noticed Windows 7 Pro detects the reader and I am able to use it without needing Lenovo's software.
A.

good to hear something positive about the W500 atlast D  I'm thinking of doing the same when I get my unit this week.  Any advice/words of caution/tips?    Does the unit come with a driver cd?  or is there a link online that I can find out?   thanks

Similar Messages

  • I am trying to open PDF files from safari, but when I click on them they open in a separate window and the information is encrypted. Any ideas on how to get them to open them in Adobe? Any help please!

    I am trying to open PDF files from safari, but when I click on them they open in a separate window and the information is encrypted. Any ideas on how to get them to open them in Adobe? Any help please!

    The pdf is loading as html code. If you save it, it will download as :
    605124.pdf.html
    Change the extension to .pdf
    And it opens and works perfectly, I just tested it:
    Use this link to download it automatically:
    http://saladeaula.estacio.br/arquivo.asp?dir=00/1020624/605124.pdf&num_seq=59828 4

  • How do I get all the control buttons in one place in 3.6.16, like they used to be in previous versions? Having the refresh and stop buttons between address and search windows, and the home button to the far right is awful.

    In 3.6.16, the buttons are all over the place. In previous versions, the forward, back, refresh, stop and home buttons were all together. In this version, the refresh and stop buttons are between the address and search windows, and the home button to the far right.
    I would love to have them all together as they used to be - much more user friendly that way. I have tried installing alternate themes, but the coding of this version over-rides the themes.

    Firefox 4.0 has a combined Reload and Stop and Go button that appears at the right end of the location bar.
    To restore the Firefox 3 appearance you can use these steps:
    * Open the "View > Toolbars > Customize" window to move the Stop and Reload button out of the location bar.
    * Move the Reload and Stop buttons to their previous position at the left side of the location bar.
    * Set the order to "Reload - Stop" to get a combined "Reload/Stop" button.
    * Set the order to "Stop - Reload" or separate them otherwise to get two distinct buttons.

  • Even after turning ON Reduce motion the icons and the windows and the apps zoom motion in and out is still giving me a lot of head ache and dizziness and motion sickness... Please fix it!!

    Even after turning ON Reduce motion the icons and the windows and the apps zoom motion in and out is still giving me a lot of head ache and dizziness and motion sickness... Please fix it!!

    hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music'  then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo

  • Why are some jpg images scrambled when they appear in my screen saver?   The same images look fine in Preview and Finder.  Some images appear scrambled in the screen saver 'preview' window and the actual screen saver. Other jpg images look fine.

    Why are some jpg images scrambled when they appear in my screen saver?   The same images look fine in Preview and Finder.  Some images appear scrambled in the screen saver 'preview' window and the actual screen saver. Other jpg images look fine.

    The desktop image is fine, taken from the exact same pool of jpg photos.  However, as soon as the slide show screen saver comes on, the images are scrambled.  What is it about the apple screen saver algorithm that scrambles the pics?

  • Can I view the browser window and the effects window at the same time?

    I just got a second monitor to complement my 24" iMac, and would like to take advantage of it by having the effects window and the browser window with all my clips open at the same time. Anyone know if this is possible?

    I think you just need to grab the Effects tab and drag it out of the Browser onto your extra monitor (though I could be wrong).

  • In Logic X, the mouse click wheel scroll is way too fast on the arrange window and the piano roll.  Is there a way to adjust this?

    In Logic X, the mouse click wheel scroll is way too fast on the arrange window and the piano roll.  Is there a way to adjust this?  This is the way I scrolled for MIDI editing on Logic 9

    Hi cris2121, assuming you're using a mouse from apple, go to >System Preferences<
    it's here where one can configure a mouse device.
    Additionally you can also configure Scrubbing in Logic: "When in scrub mode, you can slowly move the playhead in the Tracks Window and the Audio (and optional MIDI) will be played back. The playback speed depends on how fast you move the Playhead in either direction."
    Have a nice day!

  • Hide outgoing email window and the "sending message" info box

    Is it possible to hide outgoing email window and the "sending message" info box automatically after we hit send?

    not reliably.

  • Whenever I do a "lookup" from other software, or click on a hyperlink from outside the browser, the browser appears but the URL is not in the address window and the link never loads.why?

    I may be reading an article while within Foxfire, and click on a hyperlink in the article...or I may be using Thunderbird email and click on a hyperlink within the email...or I may be using software like Quicken and do a "lookup" to a webpage...no matter, any time I click on the hyperlink, it will switch to Firefox automatically (good!) and the tab shows "loading", but a webpage never loads, and the URL address window never has anything in it. On the other hand, if I copy and paste the URL from whatever hyperlink I'm trying to use, and then paste that into Firefox's URL address window, it will open. How did I lose the auto load feature?

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • Opening the Canvas window and the Timeline from the browser

    I am on an Intel 2x2.66 Dual Core using OS 10.4.11 and working in FCP 6.04.
    I know this is a stupid question but having been a composer all my life, I am not up to speed on FCP and I seem to be unable to find the answer in my manual.
    I dragged a QuickTime movie to the browser window. It is 500x375 in dimension and uses a H.264, AAC codecs. (info I got from the Get Info window).
    The video shows up and plays in the Viewer window but I cannot get the Canvas window nor the Timeline to open.
    I have tried selecting the sequence from the list in the browser and then control clicking it and looking at the shortcut menu there. The manual says I should choose Open Timeline from this shortcut menu but that is not even a choice I have. I don't mean it is grayed out, I mean there is no Open Timeline choice on the menu.
    As an alternate, the manual suggests selecting the sequence and then choosing View > Sequence in Editor. I tried this also. There is no Sequence in Editor choice under the View menu. There is a Clip in Editor choice but when I select that it simply opens the movie in Quicktime.
    I am aware that I am probably forgetting something simple or doing something stupid but I cannot figure it out. Help would be much appreciated.
    Thomas

    the simple fact that is being eluded to here is that without an active sequence in the project (shown in the browser) there is no canvas or timeline. If you delete your sequence from the browser, the timeline and canvas will disappear, and you will have to create a new sequence, then open that sequence by double clicking it, to get those windows back. Canvas and Timeline display sequence content. No sequence, no c/t.

  • SQLPLUS 9.2 on Windows and the "&" character

    Running Windows XP SP@ and SQLPlus 9.2
    using the Insert statement and text with "&" within single quotes within the Insert Statement
    The insert pauses and asks for input from the screen and removes the "&" character and the text after it.
    I tried escape: "\&" with no lock..
    How can I insert the "&" character within a text field delimited by single quotes?
    Thanks

    Type SET DEFINE OFF in your SQL*Plus session before executing the insert statement.
    chris@XE> SHOW DEFINE
    define "&" (hex 26)
    chris@XE> SET DEFINE OFF
    chris@XE> SHOW DEFINE
    define OFF
    chris@XE> Message was edited by:
    Stain

  • ER?: JSPX popup dialogs/windows and the JDev IDE

    Hi JDev team
    One thing I'm starting to find tedious in the JDev 11gTP4 IDE is when I have a JSPX page with a <af:popup> dialog/window, and I want to work with the popup rather than the rest of the page (say to drag n drop something into the popup in the editor window), I need to either search through the JSPX source code, or click down many levels in the structure window until I find the actual popup (....which if I then click on the popup node in the structure window, the editor window will display in the editor window).
    Possibly I could do a search through the code searching for "popup", but if I have several popups this can also take sometime as I need to search 1 by 1.
    As such, is there a shortcut I'm not aware of for navigating popups in a JSPX page, or alternatively could we raise an ER such that the Structure Window or similar shows an easily accessible, clickable list of popups and their ids available in the JSPX page please?
    Cheers,
    CM.

    In addition to editing popups, Visual Editor also provides ways to edit ADF components which are clipped (ie., not fully visible in VE). Select the component which is clipped and select 'Design This Container' from the contextual action menu (small drop down menu on the top-right corner of the component). Visual Editor will show the component (and its hierarchy) in the visual editor.

  • Multiple oracle homes on Windows and the "Path" environment variable

    Hi There,
    We have a windows 2003 database server that has few databases running oracle 10.2.0.3. We are installing oracle 11.2.0.1 on the box as well, and we were wondering, which binaries should come 1st in the path environment variable? and how does this effect the working oracle environment?
    Going to the oracle home selector and swapping the 2 oracle homes around will have the same effect on the windows path variable - which will treat the 1st oracle home to be the default home - are there any general rules reg. multiple oracle homes on a server and the default home?
    Should the earlier version of oracle always proceed the newer one (i.e. c:\oracle\product\10.2.0.3\bin;c:\oracle\product\11.2.0.1\bin) or should the newer oracle version comes 1st as newer oracle versions are usually backward compatible?
    Your thoughts are highly appreciated.
    Thanks

    That isn't going to happen.
    If you install 11.2 last it will appear in the PATH variable first
    If you don't want that you need to Oracle Home Selector utility in the Installer to change it.
    Obviously, as usual, all of this is documented.
    Sybrand Bakker
    Senior Oracle DBA

  • Airport utility is not working on Windows. I can configure Airport Expresses with the Macbook but multiple computers with Windows and the latest Airport Utility time out after trying to connect to the router for setup.

    I have been trying to setup Airpot Expresses (both old and new models) for a while now with the Airpot Utility 5.6.1 for Windows without any luck. I have tried this on multiple windows machines, factory reseted the devices if I needed to, but I have not had any success since this software arrived. I see the routers on the Airport Utility UI, I click on it then try to connect to set it up. At this point, it gets stuck with a long progress bar trying to connect to the device without any success. I also have a Macbook Pro, and this device & software has had no trouble setting up the routers. The problem is, we are shipping these small routers out to customers who use Windows machines and it is vital that the user can modify the settings using Airpot Utility. I am at a loss for what to do and if we can't find any solutions, we are going to move on to a different company for the routers we ship out.

    Thanks a lot i followed the instructions for safe mode (i found out that i was pressing the C button after restarting) i did whats written there but the repair couldn't be performed so in addition i needed to re-formate the HD so i erased the volume and then repaired the disk--> quite disk utilities --> start the installation from the installation DVD.
    Thanks really appreciating your help

  • HT5070 i recently had a friend update my windows and the most important part of my laptop is my ITunes & when i went on ITunes all of my songs have been deleted there has to be a way to get them back in my library? what do i do to get them back? I paid i

    aI paid a small fortune to have a very big Music Library and all of my songs are gone? How do i get them back? There has to be some way to have over 2000 + songs put back into my own Library how do i do that?

    What exactly did your friend do ? Did you or he take a backup of your iTunes library before updating your computer ? Have you checked to see if your music is still on your computer ? By default your iTunes library is stored under :
    Windows XP: \Documents and Settings\username\My Documents\My Music\
    Windows Vista: \Users\username\Music\iTunes
    Windows 7 and Windows 8: \Users\username\My Music\iTunes
    If it's there then you can add it to your iTunes library via File > Add To Library.
    If not then do you have a copy of your library on a backup ? If you do then use File > Add To Library to add it back.
    If you haven't got a backup then you might, depending upon what country that you are in and if the music is still in your country's store, be able to redownload your iTunes purchases via the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage.

Maybe you are looking for

  • Need to Populate Material Type from ECC to APO Product Master

    Hi All, I need to update the material type field from ECC to APO. I am using the userexit CIFMAT01 and component EXIT_SAPLCMAT_001. I need to extract field MTART from MARA table and need to Populate it in APO Product master. In APO i am using the ATT

  • Problem with opening PDF files in Google Chrome browser

    We have a web page displaying links to dynamically generated PDF files located on the internal repository. This files are not just text PDF files but PDF forms created using XFA technology. This means that they must be opened and filled only in Adobe

  • This pop up: iTunes has encountered a problem and needs to close.

    my itunes worked before but i downloaded it in the wrong user and that user got deleted, now when i install it and it installs and i go to run it and it says iTunes has encountered a problem and needs to close. so i uninstall i TUNES and iPOD and ins

  • MM-SUS scenario with XML PO

    Hi Gurus, I m working on SRM 7.0, Ehp6, I want to configure MM-SUS scenario. I have activated the Business function LOG_MM_P2PSE_1 and also activated the start event CL_SE_PUR_PO_WF_OUT(Create and Change) for the Workflow WS53800008 in the MM system.

  • Javascript not woking in IE and Chrome

    Hi All, I have simple javascript function in my application that set focus in button. The code is below: <script type="text/javascript"> function setfocs() $('#add_row_id').focus(); </script> This function is working in Firefox only, but not working