Windows 7 Another Preorder Question :)
Ok bestbuy.com has taken out the 108$ deposit and now the order is confirmed so does
bestbuy.com hold the Funds and use them when it ships or can i use the 108$ for something
else now since the order is done and i Can just put another 108$ in there for them to take it
out on 10/22/09 the release date or when it ships
i need to know if i can do this thanks
Well you can purchase either an upgrade or a full copy. Difference is, one has to be upgraded from a previous operating system (XP or Vista) and the other can do a clean install without the need to have a previous operating system. The Windows 7 Upgrade program provides you with an upgrade copy of Windows 7.
Adam
Best Buy Community - Retail, Americas
Forum Guidelines | Terms & Conditions | Community Guidelines | Blogging Guidelines
*Remember to mark your questions solved and click the star under the user's name to show your thanks!
Similar Messages
-
Another preorder question....
I am really looking forward to the new iPhone. I would like to know first, if you can have the phone shipped to another address besides your billing address ( i'd like to have it delivered to my work, since that's where I'll be all day) and secondly, if the phone will be delivered ON the 21st.
Thanks so much for your repliesAs far as the billing address and shipping address I am almost certain you can have it shipped to wherever you want. And I talked to Apple and they said if you pre order it, that they expect it to be delivered by the 21st.
-
Window inheritance problem, implementation question
This is a multi-part message in MIME format.
--------------F5AF60803BB8EFA34C8D4288
Content-Type: multipart/alternative;
boundary="------------24CDBE5DFBEC0C4205C15C80"
--------------24CDBE5DFBEC0C4205C15C80
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Hi!
I have a window inheritance and implementation question. I'm using
Forte 3.0.J.1.
I have a super (base) window with a PushButton on it. I want to
handle the Click event of the button in this super window therefore
I create an event handler.
<MyBtn> : PushButton
I create a sub window inheriting from the previous super window.
I put some data widgets on it and group all of them (the inherited
button as well) into a GridField. When I set the mapped type of the grid
the name of the inherited PushButton widget changes:
<MainGrid.MyBtn> : PushButton
When I run the application I get a SystemException with the
message:
Attempt to register an event on a NIL object (qqds_C_FieldWidget, 10).
Traceback:
SuperWindow.EH at line 0
SubWindow.Display at line 5
C++ Method(s)
UserApp.Run at offset 105
It is quite understandable that in runtime there is no widget called
<MyBtn>
and the event handler of the super class fails.
But what I don't know : after specifing a mapped type of a GridField why
changes
the name of those widgets that haven't got mapped type e.g.: PushButton,
PictureButton etc.
How to solve this situation?
I made a sall example which i send in attachment.
Thanks for any help and advice in advance...
Attila Racz Lufthansa Systems
Hungary
BUD LSYH
E-mail: [email protected] .-``'.
Tel.: (36 1) 431-2910 .` .' Mazsa ter 2-6.
Fax : (36 1) 431-2977 _.-' '._ H-1107 Budapest,
Hungary
--------------24CDBE5DFBEC0C4205C15C80
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
<tt> Hi!</tt><tt></tt>
<p><tt>I have a window inheritance and implementation question. I'm using</tt>
<br><tt>Forte 3.0.J.1.</tt><tt></tt>
<p><tt>I have a super (base) window with a PushButton on it. I want to</tt>
<br><tt>handle the Click event of the button in this super window therefore</tt>
<br><tt>I create an event handler.</tt><tt></tt>
<p><tt><MyBtn> : PushButton</tt><tt></tt>
<p><tt>I create a sub window inheriting from the previous super window.</tt>
<br><tt>I put some data widgets on it and group all of them (the inherited</tt>
<br><tt>button as well) into a GridField. When I set the mapped type of
the grid</tt>
<br><tt>the name of the inherited PushButton widget changes:</tt><tt></tt>
<p><tt><MainGrid.MyBtn> : PushButton</tt><tt></tt>
<p><tt>When I run the application I get a SystemException with the</tt>
<br><tt>message:</tt><tt></tt>
<p><tt>Attempt to register an event on a NIL object (qqds_C_FieldWidget,
10).</tt>
<br><tt> Traceback:</tt>
<br><tt> SuperWindow.EH
at line 0</tt>
<br><tt> SubWindow.Display
at line 5</tt>
<br><tt> C++ Method(s)</tt>
<br><tt> UserApp.Run
at offset 105</tt><tt></tt>
<p><tt>It is quite understandable that in runtime there is no widget called
<MyBtn></tt>
<br><tt>and the event handler of the super class fails.</tt><tt></tt>
<p><tt>But what I don't know : after specifing a mapped type of a GridField
why changes</tt>
<br><tt>the name of those widgets that haven't got mapped type e.g.: PushButton,</tt>
<br><tt>PictureButton etc.</tt><tt></tt>
<p><tt>How to solve this situation?</tt>
<br><tt>I made a sall example which i send in attachment.</tt><tt></tt>
<p><tt>Thanks for any help and advice in advance...</tt><tt></tt>
<p><tt>---------------------------------------------------------------------------</tt>
<br><tt> Attila Racz
Lufthansa Systems Hungary</tt>
<br><tt>
BUD LSYH</tt>
<br><tt>E-mail: [email protected]
.-``'.</tt>
<br><tt>Tel.: (36 1) 431-2910
.` .' Mazsa ter 2-6.</tt>
<br><tt>Fax : (36 1) 431-2977
_.-' '._ H-1107 Budapest, Hungary</tt>
<br><tt>---------------------------------------------------------------------------</tt>
<br><tt></tt> </html>
--------------24CDBE5DFBEC0C4205C15C80--
--------------F5AF60803BB8EFA34C8D4288
Content-Type: application/x-zip-compressed;
name="Inh.zip"
Content-Transfer-Encoding: base64
Content-Disposition: inline;
filename="Inh.zip"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--------------F5AF60803BB8EFA34C8D4288--import javax.swing.JOptionPane;
public class Test{
public static void main(String[] args)
String newItem = "Item";
float newSerial = 4234;
float newCode = 3424;
int newBase = 1000;
boolean YesWarranty = true;
boolean NoWarranty = true;
Machinery test1 = new Machinery(newItem, newCode, newSerial, newBase, YesWarranty, NoWarranty);
JOptionPane.showMessageDialog(null, "Item: " + test1.getItem() + " Serial: " + test1.getSerial() + " Code: " + test1.getCode()
+ " Warranty: " + test1.IncludeWarranty() + " No Warranty: " + test1.ExcludeWarranty()+ " Base: " + test1.getPrice());
}Tested with this and it seems to be ok?
Changed my final code too because it seemed to always add the 10% whether YesWarranty was true or false, so made it
if (TrueWarranty==true) //There is a warranty, it returns the base price plus 10%
return (base+((base/100)*10));May have posted here too early if it does work, but there is another part so if ive trouble with that il be back :P
Edited by: dave_the_bear on 16-Nov-2010 07:17
Changed base to double and used the *0.1 method -
Hello friends:
Another simple question: I need to learn things about Oracle on my desktop.
My machine runs Windows 98. Oracle has some desktop product of its Database Line?
For example: Oracle Personal?
And Oracle Lite? What's the main difference between Oracle Personal and
Oracle Lite?
Thank You
Gracias
Ing. Pablo Romero
CORDOBA ARGENTINA1. I didn't know the answer to your first question, but I googled it and it says the item is the in-call audio boost.
http://forums.crackberry.com/f71/flag-icon-47659/
2. isn't this setting determined by the carrier? So it's not a setting in the phone, but when you call in to your voicemail you can change your options? -
Dragging tabs from one Terminal.app window to another
In Safari, you can drag a tab off and "tear" it off from one window to another. Is there a way to make that work in Terminal.app? It doesn't seem to work on my end with Leopard OS X 10.5.5.
g-pod wrote:
That worked, thanks! I see what happened now. I tried to detach the tab by dragging the tab upward instead of downward, but didn't drag it up far enough for detachment.
I discovered the "bug" with Safari - about dragging "up."
I used the two tab example because it works more easily. But dragging "up" works even when the target terminal has no tab. It's a cool thing
I suspect that the tab portion of termina (or Safari) only opens when "attacked" from below. -
How do I move tabs from one window to another window?
With the previous version of firefox, I could drag a tab from one window to another window. (and if there was only one tab left in that window, it would automatically close that window because there were no more tabs open in it)
With the latest version of firefox, '''How do you drag or move a tab from one window to another window'''Hi,
To move to the next tab it's '''Ctrl''' + '''Tab''' or '''Ctrl''' + '''Pg Dn''' (Page Down). To go to the previous tabs (reverse order) it's '''Ctrl''' + '''Shift''' + '''Tab''' or '''Ctrl''' + '''Pg Up''' (Page Up) keys. More about this and other keyboard shortcuts [https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts here.] -
How to set two radius servers one is window NPS another is cisco radius server
how to set two radius servers one is window NPS another is cisco radius server
when i try the following command, once window priority is first , i type cisco radius user name, it authenticated fail
i can not use both at the same time
radius-server host 192.168.1.3 is window NPS
radius-server host 192.168.1.1 is cisco radius
http://blog.skufel.net/2012/06/how-to-integrating-cisco-devices-access-with-microsoft-npsradius/
conf t
no aaa authentication login default line
no aaa authentication login local group radius
no aaa authorization exec default group radius if-authenticated
no aaa authorization network default group radius
no aaa accounting connection default start-stop group radius
aaa new-model
aaa group server radius IAS
server 192.168.1.1 auth-port 1812 acct-port 1813
server 192.168.1.3 auth-port 1812 acct-port 1813
aaa authentication login userAuthentication local group IAS
aaa authorization exec userAuthorization local group IAS if-authenticated
aaa authorization network userAuthorization local group IAS
aaa accounting exec default start-stop group IAS
aaa accounting system default start-stop group IAS
aaa session-id common
radius-server host 192.168.1.1 auth-port 1812 acct-port 1813
radius-server host 192.168.1.2 auth-port 1812 acct-port 1813
radius-server host 192.168.1.3 auth-port 1645 acct-port 1646
radius-server host 192.168.1.3 auth-port 1812 acct-port 1813
privilege exec level 1 show config
ip radius source-interface Gi0/1
line vty 0 4
authorization exec userAuthorization
login authentication userAuthentication
transport input telnet
line vty 5 15
authorization exec userAuthorization
login authentication userAuthentication
transport input telnet
end
conf t
aaa group server radius IAS
server 192.168.1.3 auth-port 1812 acct-port 1813
server 192.168.1.1 auth-port 1812 acct-port 1813
endThe first AAA server listed in your config will always be used unless/until it becomes unavailable. At that point the NAD would move down to the next AAA server defined on the list and use that one until it becomes unavailable and then move to third one, and so on.
If you want to use two AAA servers at the same time then you will need to put a load balancer in front of them. Then the virtual IP (vip) will be listed in the NADs vs the individual AAA servers' IPs.
I hope this helps!
Thank you for rating helpful posts! -
Moving tabs from one window to another makes the new window vanish. I have hot corners enabled so when I move up to the right corner of my display I can see all my open windows but when I click on the tab that I moved to make it its own window it vanishes
I came up with an alternative solution.
Instead of actually trying to move the JInternalFrame from one JDesktopPane to another, I added a single, maximized JInternalFrame to the left side. When one of the right side frames is to be docked, I merely copy its ContentPane to the single JInternalFrame on the left, set the original to be non-visible, and adjust the properties of the JSplitPane to make the "docked" frame appear.
When the "close" button on the docked frame is pressed, I simply undo this procedure to "undock" the frame and redisplay it on the right-hand side (with its content intact from the docked frame, but in its original position). -
Is it possible to have windows on another operating system and keep OS X on the original operating system ? and If yes, Would it do any changes on the original operating system ?
Thanks in advance.1. On your computer, yes. Use Boot Camp, Parallels Desktop, VMware Fusion, VirtualBox, or similar software.
2. No; if you use an emulator, it may install system components. Back it up anyway.
(110033) -
Folder/ file icons are different sizes from one window to another!
Hi there
I am having an extremely annoying problem where all my folders and files (in icon view) are totally different sizes from each other from one window to another. For example, I might click on a folder that's icon is small sized (64x64), but when that folder opens up, the icons of the subfolders inside are huge (276x276) and need to instantly be resized and re-arranged. Then if i continue to open one of these subfolders, the file icons inside it are now medium sized (96x96). Each new folder that I go into on my hard drive will be differently sized and I end up spending ages resizing and re-arranging them before I can do my work. This problem never happened in Leopard and Im despairing of what to do.
Is there a way of setting a default icon size and spacing that can then be applied to every folder and file on the hard drive? I have used the 'Use as defaults' option on the 'View options' window but this doesn't apply it to anywhere else besides the current window you are on.
Surely, Im doing something wrong as Apple could never have overlooked such an obvious problem like this?
Can anyone advise?
Many thanks
DanThe Finder will (theoretically) remember the view settings for each individual folder that you visit. If you have not opened a particular folder before, you should get the default view settings, but once you have changed the view then that is what you will get on subsequent visits. You can erase the previous settings by deleting the (normally invisible) .DS_Store file that is created in a folder when it is opened, but this file can contain other Finder metadata.
-
Fire Plug from one window to another
Dear All,
Is it possile to fire an outbound plug from one window to another?
I am using a Popup window and on clicking a button in the popup window, I want to navigate to another view in the parent window.
I know there are other ways to handle these kind of scenarios like using an eventhandler in the parent view and them firing a plug, but that would affect the rest of the applicatin flow.
So I cannot avoid firing the plug from the view in the popup window.
Can it be done?
Thanks and regards,
MayureshHi Mayuresh Kanvinde ,
I believe your popup is a modal window. If so in your action handler of the button on the popup window you can hide the popup window and then fire the navigation plug of your parent window.
Your popup button action handler can call a method in your component controller where you can write the code to hide the existing popup window and then fire the plug in your parent window.
make sure you store the IWDWindow object of your popup window on the context so that you have access to it to hide the popup window.
Regards,
Sanyev -
Can I hand off a Premiere Pro CC file created in Windows to another editor who works in Premier Pro CC Mac OS?
Thanks Miles4Ever!
When you say converted, do you mean you got a dialogue box after double clicking saying the file needed to be converted? Or some other kind of procedure. thanks again. -
Another newb question: multiple virtual servers
Hi, I have yet another ignorant question. I have several unrelated web projects that I am working on, and I would like to be able to set up a virtual server for each one for testing purposes, such as: http://project1, http://project2, http://project3. Can someone tell me if this is doable, and if there are any tutorials/resources on this for someone who has 0 experience running a web serer? Sorry for being so ignorant!
Yes, it is doable.
You can setup virtual server either by IP or by name.
If you have one IP, and want to set them up by name (ex. http://project1, http://project2, http://project3) you can do so easily with this type of configuration:
<virtual-server>
<name>mydomain</name>
<http-listener-name>http-listener-1</http-listener-name>
<host>*.mydomain.com</host>
<document-root>/www/domain</document-root>
</virtual-server>
<virtual-server>
<name>myotherdomain</name>
<http-listener-name>http-listener-1</http-listener-name>
<host>*.myotherdomain.com</host>
<document-root>/www/myotherdomain</document-root>
</virtual-server>
....The important part here is that
a) all virtual servers share the same HTTP listener
b) which virtual server serves the request depends on the $HOST request header send by the client. Sun Web Server does the matching for you. It will match $HOST vs. the virtual server's host attribute. Depending on which site you connect to the right virtual server will be used.
c) if the $HOST request header does not match any of the virtual servers, then the default virtual server defined in the HTTP listener will be used.
To create a virtual server, use the Admin GUI, access the configuration, and then add new virtual server. Or use the following CLI command.
wadm> create-virtual-server --config=myconfig --http-listener-name=http-listener-1 --document-root=/www/docs/myserver.com --host-pattern=myserver.com --log-file=../logs/myserver.com-error_logs myserverHost pattern will be used for matching. Some of this elements might be optional.
Hope that helps. And keep the questions coming :D
Edit: Also check the documentation
Using Virtual Servers in SJS Web Server 7.0 -
Spaces switches away from application when moving window to another monitor
Using multiple monitors in Mavericks:
I often want a window from the same application on each monitor. Why? Because I'm working in one window, and I want to refer to another. Mostly it's the brower (Firefox), but sometimes it's Word or Excel too although I think this is a Mavericks issue.
Here's the issue: When I move the a window to another monitor, Spaces on the original monitor changes away from the current application.
This is frustrating, because I have to keep Cmd Tabbing to get back to my original application on both monitors... how do I prevent this from happening?
Thanks!This reply from Grzegortz Krzminski was helpful - problem solved:
"Hover your mouse over the tasbar icon of the application (the thumbnail preview appears) > right click on the thumbnail preview > select Move > hold the button and move the window." -
Command to move window to another desk?
i was wonding if there's a command to move a window to another desk. Also is there a "command line" thread because that would be really helpfull to people like me who don't know how to use it at all and would like to learn a little at their own pase, Thanks
Tayo.hatch wrote:yes i do mean workspace. I'm using Gnome, and a Bash thread would be desirable because people often have qustions about it for instance moving a window to another workspace, sorry for not knowing all the terms for this stuff, pretty new to the Linux world.
GNOME is a desktop environment, but that doesn't settle what window manager you're using, which would also be helpful to know. I think most GNOME users use either metacity or compiz, but strictly speaking there are quite a few others you might be using too, from openbox to a tiling wm. As for tools that work with a variety of window managers, xdotool has already been mentioned, and there's also wmctrl. But there's a good chance your window manager has something specific that might work even better. For example, in Compiz, activating the "Put" plugin will allow you to define key-bindings for sending windows to particular workspaces, or to adjacent ones.
Maybe you are looking for
-
My movies and music videos won't show up on my computer screen, I can hear the sound but not see the video how do I fix this? I'm not sure what to do as far as turning my purchased movie into DVD goes either. I just want to put the movie onto a DVD d
-
Setting a master page at the global level
Hi, We are purchasing a commercial branding solution to our company SharePoint Portals. My question is: how can we enforce so that any time a Farm Administrator creates a site collection, the site collection gets the default master page derived from
-
Foreign Trade Data: Redetermining
My open purchase orders did not show a foreign trade tab before. I made it possible that a foreign trade is ALWAYS shown in the PO now. It is obvious that these fields in my previuos PO are not filled in the new situation. How can make the foreign tr
-
RLFC Excise transaction type during consignment return
Hi All, During consignment return for adjusting JV can we use RLFC transaction type instead of OTHR. So far we used only OTHR. What are all the impacts if we move to RLFC all of a sudden. Please explain. Regards Raja Durai
-
Weblogic.deploy throws exception.
In WLS 6.1 SP01, I am trying to add new Application to Weblogic, by using folloowing command. java -cp c:\bea\wlserver6.1\lib\weblogic.jar weblogic.deploy -debug -url mymachine:7001 deploy -username system mypasswd appname "file:////c:\dir1\myApp.ear