Windows 7 as *.img?

Hi, I just downloaded Windows 7 as an IMG image, transferred it to a USB stick, and want to install it in Boot Camp.
However, the only tutorials I have been able to find assumes that my windows copy is an ISO image.
Does anybody know if it is possible to install windows 7 on boot camp using an IMG image?
Hope anybody out there has the answer!

How you burn it is critical part.
And the version is likely Windows 7 Pro SP1 64-bit.
Just a couple of recent threads:
I have an oem windows 7 DVD but the bootcamp asst asks for an iso image
Burn ISO or EXE to DVD - How To
Create Windows install disk option in Lion Bootcamp?
http://simplyburns.en.softonic.com/mac

Similar Messages

Is it possible to install Windows 7 on Retina MacBook with a shared CD drive?

My school provides Windows 7 Ultimate upgrades to students
My friend installed Windows 7 normally even though it's technically an upgrade (burned the .img file to a DVD using Disk Utility and installed it through the Boot Camp Assistant tool in Snow Leopard)
I own a 2008 MacBook which has an optical drive
I own 1, 2 GB thumb drive and 1, 4 GB thumb drive
Is it possible to install Windows 7 through my Retina MacBook Pro through a shared CD connection with my 2008 MacBook?
I tried using the Boot Camp Assitant tool.
I burned the Windows 7 upgrade .img file to a DVD with Disk Utility just like my friend
I copied that DVD as a .cdr file to my Retina MacBook using the shared CD connection and Disk Utility, and changed the file extension to .iso
With the Boot Camp Assistant, I set-up my 4 GB thumb drive
When I get to the "Create a Partition for Windows" screen and I press install, I get the message "The installer disc could not be found".
The DVD is in my 2008 MacBook and I mounted it on the Retina MacBook. The 4 GB Windows set-up thumb drive is connected to the Retina MacBook.
I'm confused as to what I'm doing wrong.
Any help is appreciated.

You need the USB SuperDrive or an USB disk to install Windows on the computer

[SOLVED] Maximize window problem on Openbox

Hello guys, my problem is that the window don't maxime.
Window maximized:
http://img.ctrlv.in/img/14/10/16/543f1e5aa5dc4.png
Now without maximize:
http://img.ctrlv.in/img/14/10/16/543f1ed21c54b.png
Someone can help me? Thank you in advance!
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --
-- author edit: sorry --
Last edited by eduardojunio (2014-10-16 02:38:04)

The output is:
[archie@pimposo ~]$ xrandr
Screen 0: minimum 8 x 8, current 1366 x 768, maximum 32767 x 32767
LVDS1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1024x768 60.00*+
800x600 60.32 56.25
640x480 59.94
VGA1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
1366x768 59.79*+
1024x768 60.00
800x600 60.32
640x480 60.00
720x400 70.08
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
[archie@pimposo ~]$

Smartforms output as HTML in email

Hi,
I want to send the output of a smartform as html in email body.
I found and used this bolg: :<a href="/people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp HTML Email from SAP CRM/ERP</a>
I did everything as per the blog.
However I am getting the email as:
sf @media print {.xsfnoprint{ display : none ;}}/* Default css layout information for SAP Smart Forms (XSF Output) Last modified: 12.05.2003 /@media screen { body { background-color : #EFEFEF ; }}@media screen { .page { border-style : outset ; border-width : 2pt ; background-color : white ; }}/@media print { .page { overflow: hidden; }}// unification browser-dependent settings /table { border-spacing: 0pt; empty-cells: show;}tr { vertical-align: top; }td input img img.icon / End of default.css */.SYSTEM div#B.par{ font-family : "Courier New" ; font-size : 12pt ; font-weight : normal ; line-height : 4.23mm ; text-decoration : none ; text-align : justify ; clear : both ;}.SYSTEM div#L.par{ font-family : "Courier New" ; font-size : 12pt ; font-weight : normal ; line-height : 4.23mm ; text-decoration : none ; text-align : left ; clear : both ;}.SYSTEM a.SYSTEM span#H.char{ font-weight : bold ;}.SYSTEM span#I.char{ font-style : italic ;}.SYSTEM span#U.char{ text-decoration : underline ;}#sfPAGE1-001.page@media screen {#MAIN.win{ overflow : auto ;}}@media print {#MAIN.win{ overflow : hidden ;}}#sfPAGE1-001.page #MAIN.win
Welcome
<IMG src="https://www.sdn.sap.com/sd/img/logo_header.gif" border="0" aligh="left" width="559" height="48">
I am using: Lotus notes client for email and my smartform contains only two text elements: one containing text Welcome and other containing text
<IMG src="https://www.sdn.sap.com/sd/img/logo_header.gif" border="0" aligh="left" width="559" height="48">
When I display the document using SOST, I get the output as
Address bar has this: C:\Documents and Settings\EDC LTIL02\SapWorkDir\TESTHTMLEMAILFROMSMARTFORMOUTPUT_20070928154506.046_X.MHT
and window contains:
Welcome
<IMG src="https://www.sdn.sap.com/sd/img/logo_header.gif" border="0" aligh="left" width="559" height="48"> "
Regards,
Reema
Message was edited by:
        Reema Shahbazkar
In case anyone needs to have a look at my code:
REPORT ZSMARTFORM_2_HTML_EMAIL.
get generated function module for the smartform
DATA: FM_NAME TYPE RS38L_FNAM.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    FORMNAME                 = 'ZSF_SAMPLE_HTML'
VARIANT                  = ' '
DIRECT_CALL              = ' '
IMPORTING
   FM_NAME                  = FM_NAME
EXCEPTIONS
   NO_FORM                  = 1
   NO_FUNCTION_MODULE       = 2
   OTHERS                   = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
get smartform contetnt
set smartform output options
data:
control_parameters type SSFCTRLOP,
OUTPUT_OPTIONS     TYPE SSFCOMPOP,
DOCUMENT_OUTPUT_INFO TYPE SSFCRESPD,
JOB_OUTPUT_INFO TYPE SSFCRESCL,
JOB_OUTPUT_OPTIONS TYPE SSFCRESOP,
XSFPARAM_LINE TYPE SSFXSFP,
P_HTML TYPE TRFRESULT,
P_GRAPHICS TYPE TSF_XSF_GR,
WA_RETURN TYPE BAPIRET2.
CONSTANTS: C_GR_DIR TYPE TDTEXT VALUE '/MYGRAPHICS'.
control_parameters-NO_DIALOG = 'X'.
*control_parameters-GETOTF = 'X'.
OUTPUT_OPTIONS-TDNEWID = SPACE.
OUTPUT_OPTIONS-TDIMMED = SPACE.
OUTPUT_OPTIONS-XSFCMODE = 'X'. "RUNTIME SETTINGS FROM SMARTFORM HEADER TO BE USED
OUTPUT_OPTIONS-XSF = 'X'. "XSF OUTPUT ACTIVATED
OUTPUT_OPTIONS-XSFOUTMODE = 'A'. "XSF OUTPUT STREAM PASSED DIRECTLY TO CALLING PROGRAM AS AN INTERNAL TABLE.
CLEAR: OUTPUT_OPTIONS-XSFOUTDEV. "OUTPUT SPOOL DEVICE
OUTPUT_OPTIONS-XSFFORMAT = 'X'. "ADDITIONALLLY TO XSF, HTML AND CSS LAYOUT INFORMATION IS ALSO PASSED TO CALLING PROGRAM
XSFPARAM_LINE-NAME = 'GRAPHICS'.
XSFPARAM_LINE-VALUE = 'EXTRACT'.
APPEND XSFPARAM_LINE TO OUTPUT_OPTIONS-XSFPARS.
XSFPARAM_LINE-NAME = 'GRAPHICS-DIRECTORY'.
XSFPARAM_LINE-VALUE = C_GR_DIR.
APPEND XSFPARAM_LINE TO OUTPUT_OPTIONS-XSFPARS.
XSFPARAM_LINE-NAME = 'CONTENT-ID'.
XSFPARAM_LINE-VALUE = 'ENABLE'.
APPEND XSFPARAM_LINE TO OUTPUT_OPTIONS-XSFPARS.
CALL GENERATED FUNCTION MODULE TO GET FORM CONTENTS
CALL FUNCTION FM_NAME
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
   CONTROL_PARAMETERS         = CONTROL_PARAMETERS
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
   OUTPUT_OPTIONS             = OUTPUT_OPTIONS
USER_SETTINGS              = 'X'
IMPORTING
   DOCUMENT_OUTPUT_INFO       = DOCUMENT_OUTPUT_INFO
   JOB_OUTPUT_INFO            = JOB_OUTPUT_INFO
   JOB_OUTPUT_OPTIONS         = JOB_OUTPUT_OPTIONS
EXCEPTIONS
FORMATTING_ERROR           = 1
INTERNAL_ERROR             = 2
SEND_ERROR                 = 3
USER_CANCELED              = 4
OTHERS                     = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SEPARATE HTML GRAPHICAL N CSS LAYOUT CONTENT
P_HTML = JOB_OUTPUT_INFO-XMLOUTPUT-TRFRESULT.
P_GRAPHICS[] = JOB_OUTPUT_INFO-XMLOUTPUT-XSFGR[].
PROCEED TO SEND EMAIL
DATA: HTML_DATA TYPE TRFRESULT,
      L_HTML_RAW LIKE LINE OF HTML_DATA-CONTENT,
      HTML_XSTR TYPE XSTRING.
CLEAR: HTML_XSTR.
LOOP AT P_HTML-CONTENT INTO L_HTML_RAW.
CONCATENATE HTML_XSTR L_HTML_RAW INTO HTML_XSTR IN BYTE MODE.
ENDLOOP.
HTML_XSTR = HTML_XSTR(P_HTML-LENGTH).
SPECIAL CHARACTER CONVERSION
DATA: HTML_STR TYPE STRING,
      HTML_LEN TYPE I.
CALL FUNCTION 'SCP_TRANSLATE_CHARS'
EXPORTING
    INBUFF                   = HTML_XSTR
INBUFFLG                 = 0
   INCODE                   = '4110' "utf-8
OUTBUFFLG                = 0
OUTCODE                  = '0000'
   CSUBST                   = 'X'
SUBSTC_HASH              = ' '
SUBSTC_DOT               = ' '
   SUBSTC_SPACE             = 'x'
SUBSTC                   = '00035'
IMPORTING
INUSED                   =
   OUTBUFF                  = HTML_STR
OUTOVERFLOW              =
   OUTUSED                  = HTML_LEN
SUBSTED                  =
INPUT_ENDS_IN_CHAR       =
ERRMSG                   =
EXCEPTIONS
INVALID_CODEPAGE         = 1
INTERNAL_ERROR           = 2
CANNOT_CONVERT           = 3
FIELDS_BAD_TYPE          = 4
OTHERS                   = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CHANGE ENCODING UTF-8 TO LATIN1
REPLACE ALL OCCURRENCES OF 'UTF-8' IN HTML_STR WITH 'iso-8859-1' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<IMG' IN HTML_STR WITH '<IMG' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '/>' IN HTML_STR WITH '/>' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<A>' IN HTML_STR WITH '' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<' IN HTML_STR WITH '<' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '>' IN HTML_STR WITH '>' IGNORING CASE.
HTML_LEN = STRLEN( HTML_STR ).
DATA: L_OFFSET TYPE I,
      L_LENGTH TYPE I,
      L_DIFF TYPE I,
      LT_SOLI TYPE SOLI_TAB,
      LS_SOLI TYPE SOLI.
L_OFFSET = 0.
L_LENGTH = 255.
WHILE L_OFFSET < HTML_LEN.
L_DIFF = HTML_LEN - L_OFFSET.
IF L_DIFF > L_LENGTH.
    LS_SOLI-LINE = HTML_STR+L_OFFSET(L_LENGTH).
ELSE.
    LS_SOLI-LINE = HTML_STR+L_OFFSET(L_DIFF).
ENDIF.
APPEND LS_SOLI TO LT_SOLI.
ADD L_LENGTH TO L_OFFSET.
ENDWHILE.
DATA: LO_MIME_HELPER TYPE REF TO CL_GBT_MULTIRELATED_SERVICE.
CREATE OBJECT LO_MIME_HELPER
EXPORTING
    CODEPAGE = '1133'.
CALL METHOD LO_MIME_HELPER->SET_MAIN_HTML
EXPORTING
    CONTENT     = LT_SOLI
   FILENAME    =
   DESCRIPTION =
HANDLE GRAPHICS
DATA: L_GRAPHIC TYPE SSF_XSF_GR,
      GR_XSTR TYPE XSTRING,
      L_GR_RAW TYPE BAPICONTEN,
      L_CONTENT_ID TYPE STRING,
      L_CONTENT_TYPE TYPE W3CONTTYPE,
      L_OBJ_LEN TYPE SO_OBJ_LEN,
      L_FILENAME TYPE STRING,
      LT_SOLIX TYPE SOLIX_TAB,
      LS_SOLIX TYPE SOLIX.
LOOP AT P_GRAPHICS INTO L_GRAPHIC.
CLEAR: GR_XSTR.
LOOP AT L_GRAPHIC-CONTENT INTO L_GR_RAW.
    CONCATENATE GR_XSTR L_GR_RAW-LINE INTO GR_XSTR IN BYTE MODE.
ENDLOOP.
GR_XSTR = GR_XSTR(L_GRAPHIC-LENGTH).
L_OFFSET = 0.
L_LENGTH = 255.
CLEAR LT_SOLIX[].
WHILE L_OFFSET < L_GRAPHIC-LENGTH.
    L_DIFF = L_GRAPHIC-LENGTH - L_OFFSET.
    IF L_DIFF > L_LENGTH.
      LS_SOLIX-LINE = GR_XSTR+L_OFFSET(L_LENGTH).
    ELSE.
      LS_SOLIX-LINE = GR_XSTR+L_OFFSET(L_DIFF).
    ENDIF.
    APPEND LS_SOLIX TO LT_SOLIX.
    ADD L_LENGTH TO L_OFFSET.
ENDWHILE.
CONCATENATE C_GR_DIR L_GRAPHIC-GRAPHICS '.BMP' INTO L_FILENAME.
CONCATENATE C_GR_DIR L_GRAPHIC-GRAPHICS '.BMP' INTO L_CONTENT_ID.
L_CONTENT_TYPE = L_GRAPHIC-HTTPTYPE.
L_OBJ_LEN = L_GRAPHIC-LENGTH.
ADD IMAGES TO EMAIL
CALL METHOD LO_MIME_HELPER->ADD_BINARY_PART
    EXPORTING
      CONTENT      = LT_SOLIX
     FILENAME     =
     EXTENSION    =
     DESCRIPTION =
      CONTENT_TYPE = L_CONTENT_TYPE
      LENGTH       = L_OBJ_LEN
      CONTENT_ID   = L_CONTENT_ID
ENDLOOP.
DATA: LO_DOC_BCS TYPE REF TO CL_DOCUMENT_BCS,
      P_SUBJECT TYPE SO_OBJ_DES,
      LV_GBT_MIME TYPE REF TO CX_GBT_MIME,
      LV_BCOM_MIME TYPE REF TO CX_BCOM_MIME,
      LV_DOCUMENT_BCS TYPE REF TO CX_DOCUMENT_BCS.
P_SUBJECT = 'TEST HTML EMAIL FROM SMARTFORM OUTPUT'.
TRY.
CALL METHOD CL_DOCUMENT_BCS=>CREATE_FROM_MULTIRELATED
    EXPORTING
      I_SUBJECT          = P_SUBJECT
      I_LANGUAGE         = SY-LANGU
      I_IMPORTANCE       = '5'
      I_SENSITIVITY      = 'F'
      I_MULTIREL_SERVICE = LO_MIME_HELPER
    RECEIVING
      RESULT             = LO_DOC_BCS
   CATCH CX_DOCUMENT_BCS INTO LV_DOCUMENT_BCS.
   CATCH CX_BCOM_MIME INTO LV_BCOM_MIME.
   CATCH CX_GBT_MIME INTO LV_GBT_MIME.
ENDTRY.
RECEIVERS
DATA: P_RECEIVERS TYPE TABLE OF SOMLRECI1,
      RECEIVER TYPE SOMLRECI1,
      L_MAIL_ADDRESS TYPE AD_SMTPADR,
      LO_BCS TYPE REF TO CL_BCS,
      LV_SEND_REQ_BCS TYPE REF TO CX_SEND_REQ_BCS,
      L_USERNAME TYPE UNAME,
      SEND_PARTNER TYPE BU_PARTNER,
      LI_SENDER TYPE REF TO IF_SENDER_BCS,
      LV_ADDRESS_BCS TYPE REF TO CX_ADDRESS_BCS,
      LV_SENT_TO_ALL TYPE BOOLEAN.
CLEAR RECEIVER.
RECEIVER-RECEIVER = '[email protected]'.
RECEIVER-REC_TYPE = 'U'.
RECEIVER-COM_TYPE = 'INT'.
APPEND RECEIVER TO P_RECEIVERS.
L_USERNAME = SY-UNAME.
CLEAR RECEIVER.
LOOP AT P_RECEIVERS INTO RECEIVER.
L_MAIL_ADDRESS = RECEIVER-RECEIVER.
TRY.
CALL METHOD CL_BCS=>CREATE_PERSISTENT
    RECEIVING
      RESULT = LO_BCS
   CALL METHOD LO_BCS->SET_DOCUMENT
     EXPORTING
       I_DOCUMENT = LO_DOC_BCS
   CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
ENDTRY.
CREATE SENDER
CLASS CL_CAM_ADDRESS_BCS DEFINITION LOAD.
TRY.
IF L_USERNAME NS '@'.
    L_USERNAME = SEND_PARTNER.
    TRANSLATE L_USERNAME TO UPPER CASE.
    LI_SENDER ?= CL_SAPUSER_BCS=>CREATE( L_USERNAME ).
ELSE.
    DATA: L_FROM_MAIL_ADDRESS TYPE AD_SMTPADR.
    L_FROM_MAIL_ADDRESS = L_USERNAME.
    LI_SENDER ?= CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS( I_ADDRESS_STRING = L_FROM_MAIL_ADDRESS ).
ENDIF.
CALL METHOD LO_BCS->SET_SENDER
    EXPORTING
      I_SENDER = LI_SENDER
CATCH CX_ADDRESS_BCS INTO LV_ADDRESS_BCS.
CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
ENDTRY.
create recepient
data: LO_RECEPIENT TYPE REF TO IF_RECIPIENT_BCS.
TRY.
CALL METHOD CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS
   EXPORTING
     I_ADDRESS_STRING = L_MAIL_ADDRESS
    I_ADDRESS_NAME   =
    I_INCL_SAPUSER   =
   RECEIVING
     RESULT           = LO_RECEPIENT
CATCH CX_ADDRESS_BCS INTO LV_ADDRESS_BCS.
ENDTRY.
TRY.
CALL METHOD LO_BCS->ADD_RECIPIENT
   EXPORTING
     I_RECIPIENT = LO_RECEPIENT
    I_EXPRESS    =
    I_COPY       =
    I_BLIND_COPY =
    I_NO_FORWARD =
CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
ENDTRY.
SEND EMAIL DOCUMENT
TRY.
CALL METHOD LO_BCS->SEND_REQUEST->SET_REQUESTED_STATUS
EXPORTING
    I_REQUESTED_STATUS = 'N'
TRY.
CALL METHOD LO_BCS->SEND
EXPORTING
   I_WITH_ERROR_SCREEN = SPACE
RECEIVING
    RESULT              = LV_SENT_TO_ALL
CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
ENDTRY.
ENDTRY.
ENDLOOP.
COMMIT WORK.

Hi,
I want to send the output of a smartform as html in email body.
I found and used this bolg: :<a href="/people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp HTML Email from SAP CRM/ERP</a>
I did everything as per the blog.
However I am getting the email as:
sf @media print {.xsfnoprint{ display : none ;}}/* Default css layout information for SAP Smart Forms (XSF Output) Last modified: 12.05.2003 /@media screen { body { background-color : #EFEFEF ; }}@media screen { .page { border-style : outset ; border-width : 2pt ; background-color : white ; }}/@media print { .page { overflow: hidden; }}// unification browser-dependent settings /table { border-spacing: 0pt; empty-cells: show;}tr { vertical-align: top; }td input img img.icon / End of default.css */.SYSTEM div#B.par{ font-family : "Courier New" ; font-size : 12pt ; font-weight : normal ; line-height : 4.23mm ; text-decoration : none ; text-align : justify ; clear : both ;}.SYSTEM div#L.par{ font-family : "Courier New" ; font-size : 12pt ; font-weight : normal ; line-height : 4.23mm ; text-decoration : none ; text-align : left ; clear : both ;}.SYSTEM a.SYSTEM span#H.char{ font-weight : bold ;}.SYSTEM span#I.char{ font-style : italic ;}.SYSTEM span#U.char{ text-decoration : underline ;}#sfPAGE1-001.page@media screen {#MAIN.win{ overflow : auto ;}}@media print {#MAIN.win{ overflow : hidden ;}}#sfPAGE1-001.page #MAIN.win
Welcome
<IMG src="https://www.sdn.sap.com/sd/img/logo_header.gif" border="0" aligh="left" width="559" height="48">
I am using: Lotus notes client for email and my smartform contains only two text elements: one containing text Welcome and other containing text
<IMG src="https://www.sdn.sap.com/sd/img/logo_header.gif" border="0" aligh="left" width="559" height="48">
When I display the document using SOST, I get the output as
Address bar has this: C:\Documents and Settings\EDC LTIL02\SapWorkDir\TESTHTMLEMAILFROMSMARTFORMOUTPUT_20070928154506.046_X.MHT
and window contains:
Welcome
<IMG src="https://www.sdn.sap.com/sd/img/logo_header.gif" border="0" aligh="left" width="559" height="48"> "
Regards,
Reema
Message was edited by:
        Reema Shahbazkar
In case anyone needs to have a look at my code:
REPORT ZSMARTFORM_2_HTML_EMAIL.
get generated function module for the smartform
DATA: FM_NAME TYPE RS38L_FNAM.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    FORMNAME                 = 'ZSF_SAMPLE_HTML'
VARIANT                  = ' '
DIRECT_CALL              = ' '
IMPORTING
   FM_NAME                  = FM_NAME
EXCEPTIONS
   NO_FORM                  = 1
   NO_FUNCTION_MODULE       = 2
   OTHERS                   = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
get smartform contetnt
set smartform output options
data:
control_parameters type SSFCTRLOP,
OUTPUT_OPTIONS     TYPE SSFCOMPOP,
DOCUMENT_OUTPUT_INFO TYPE SSFCRESPD,
JOB_OUTPUT_INFO TYPE SSFCRESCL,
JOB_OUTPUT_OPTIONS TYPE SSFCRESOP,
XSFPARAM_LINE TYPE SSFXSFP,
P_HTML TYPE TRFRESULT,
P_GRAPHICS TYPE TSF_XSF_GR,
WA_RETURN TYPE BAPIRET2.
CONSTANTS: C_GR_DIR TYPE TDTEXT VALUE '/MYGRAPHICS'.
control_parameters-NO_DIALOG = 'X'.
*control_parameters-GETOTF = 'X'.
OUTPUT_OPTIONS-TDNEWID = SPACE.
OUTPUT_OPTIONS-TDIMMED = SPACE.
OUTPUT_OPTIONS-XSFCMODE = 'X'. "RUNTIME SETTINGS FROM SMARTFORM HEADER TO BE USED
OUTPUT_OPTIONS-XSF = 'X'. "XSF OUTPUT ACTIVATED
OUTPUT_OPTIONS-XSFOUTMODE = 'A'. "XSF OUTPUT STREAM PASSED DIRECTLY TO CALLING PROGRAM AS AN INTERNAL TABLE.
CLEAR: OUTPUT_OPTIONS-XSFOUTDEV. "OUTPUT SPOOL DEVICE
OUTPUT_OPTIONS-XSFFORMAT = 'X'. "ADDITIONALLLY TO XSF, HTML AND CSS LAYOUT INFORMATION IS ALSO PASSED TO CALLING PROGRAM
XSFPARAM_LINE-NAME = 'GRAPHICS'.
XSFPARAM_LINE-VALUE = 'EXTRACT'.
APPEND XSFPARAM_LINE TO OUTPUT_OPTIONS-XSFPARS.
XSFPARAM_LINE-NAME = 'GRAPHICS-DIRECTORY'.
XSFPARAM_LINE-VALUE = C_GR_DIR.
APPEND XSFPARAM_LINE TO OUTPUT_OPTIONS-XSFPARS.
XSFPARAM_LINE-NAME = 'CONTENT-ID'.
XSFPARAM_LINE-VALUE = 'ENABLE'.
APPEND XSFPARAM_LINE TO OUTPUT_OPTIONS-XSFPARS.
CALL GENERATED FUNCTION MODULE TO GET FORM CONTENTS
CALL FUNCTION FM_NAME
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
   CONTROL_PARAMETERS         = CONTROL_PARAMETERS
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
   OUTPUT_OPTIONS             = OUTPUT_OPTIONS
USER_SETTINGS              = 'X'
IMPORTING
   DOCUMENT_OUTPUT_INFO       = DOCUMENT_OUTPUT_INFO
   JOB_OUTPUT_INFO            = JOB_OUTPUT_INFO
   JOB_OUTPUT_OPTIONS         = JOB_OUTPUT_OPTIONS
EXCEPTIONS
FORMATTING_ERROR           = 1
INTERNAL_ERROR             = 2
SEND_ERROR                 = 3
USER_CANCELED              = 4
OTHERS                     = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SEPARATE HTML GRAPHICAL N CSS LAYOUT CONTENT
P_HTML = JOB_OUTPUT_INFO-XMLOUTPUT-TRFRESULT.
P_GRAPHICS[] = JOB_OUTPUT_INFO-XMLOUTPUT-XSFGR[].
PROCEED TO SEND EMAIL
DATA: HTML_DATA TYPE TRFRESULT,
      L_HTML_RAW LIKE LINE OF HTML_DATA-CONTENT,
      HTML_XSTR TYPE XSTRING.
CLEAR: HTML_XSTR.
LOOP AT P_HTML-CONTENT INTO L_HTML_RAW.
CONCATENATE HTML_XSTR L_HTML_RAW INTO HTML_XSTR IN BYTE MODE.
ENDLOOP.
HTML_XSTR = HTML_XSTR(P_HTML-LENGTH).
SPECIAL CHARACTER CONVERSION
DATA: HTML_STR TYPE STRING,
      HTML_LEN TYPE I.
CALL FUNCTION 'SCP_TRANSLATE_CHARS'
EXPORTING
    INBUFF                   = HTML_XSTR
INBUFFLG                 = 0
   INCODE                   = '4110' "utf-8
OUTBUFFLG                = 0
OUTCODE                  = '0000'
   CSUBST                   = 'X'
SUBSTC_HASH              = ' '
SUBSTC_DOT               = ' '
   SUBSTC_SPACE             = 'x'
SUBSTC                   = '00035'
IMPORTING
INUSED                   =
   OUTBUFF                  = HTML_STR
OUTOVERFLOW              =
   OUTUSED                  = HTML_LEN
SUBSTED                  =
INPUT_ENDS_IN_CHAR       =
ERRMSG                   =
EXCEPTIONS
INVALID_CODEPAGE         = 1
INTERNAL_ERROR           = 2
CANNOT_CONVERT           = 3
FIELDS_BAD_TYPE          = 4
OTHERS                   = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CHANGE ENCODING UTF-8 TO LATIN1
REPLACE ALL OCCURRENCES OF 'UTF-8' IN HTML_STR WITH 'iso-8859-1' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<IMG' IN HTML_STR WITH '<IMG' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '/>' IN HTML_STR WITH '/>' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<A>' IN HTML_STR WITH '' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<' IN HTML_STR WITH '<' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '>' IN HTML_STR WITH '>' IGNORING CASE.
HTML_LEN = STRLEN( HTML_STR ).
DATA: L_OFFSET TYPE I,
      L_LENGTH TYPE I,
      L_DIFF TYPE I,
      LT_SOLI TYPE SOLI_TAB,
      LS_SOLI TYPE SOLI.
L_OFFSET = 0.
L_LENGTH = 255.
WHILE L_OFFSET < HTML_LEN.
L_DIFF = HTML_LEN - L_OFFSET.
IF L_DIFF > L_LENGTH.
    LS_SOLI-LINE = HTML_STR+L_OFFSET(L_LENGTH).
ELSE.
    LS_SOLI-LINE = HTML_STR+L_OFFSET(L_DIFF).
ENDIF.
APPEND LS_SOLI TO LT_SOLI.
ADD L_LENGTH TO L_OFFSET.
ENDWHILE.
DATA: LO_MIME_HELPER TYPE REF TO CL_GBT_MULTIRELATED_SERVICE.
CREATE OBJECT LO_MIME_HELPER
EXPORTING
    CODEPAGE = '1133'.
CALL METHOD LO_MIME_HELPER->SET_MAIN_HTML
EXPORTING
    CONTENT     = LT_SOLI
   FILENAME    =
   DESCRIPTION =
HANDLE GRAPHICS
DATA: L_GRAPHIC TYPE SSF_XSF_GR,
      GR_XSTR TYPE XSTRING,
      L_GR_RAW TYPE BAPICONTEN,
      L_CONTENT_ID TYPE STRING,
      L_CONTENT_TYPE TYPE W3CONTTYPE,
      L_OBJ_LEN TYPE SO_OBJ_LEN,
      L_FILENAME TYPE STRING,
      LT_SOLIX TYPE SOLIX_TAB,
      LS_SOLIX TYPE SOLIX.
LOOP AT P_GRAPHICS INTO L_GRAPHIC.
CLEAR: GR_XSTR.
LOOP AT L_GRAPHIC-CONTENT INTO L_GR_RAW.
    CONCATENATE GR_XSTR L_GR_RAW-LINE INTO GR_XSTR IN BYTE MODE.
ENDLOOP.
GR_XSTR = GR_XSTR(L_GRAPHIC-LENGTH).
L_OFFSET = 0.
L_LENGTH = 255.
CLEAR LT_SOLIX[].
WHILE L_OFFSET < L_GRAPHIC-LENGTH.
    L_DIFF = L_GRAPHIC-LENGTH - L_OFFSET.
    IF L_DIFF > L_LENGTH.
      LS_SOLIX-LINE = GR_XSTR+L_OFFSET(L_LENGTH).
    ELSE.
      LS_SOLIX-LINE = GR_XSTR+L_OFFSET(L_DIFF).
    ENDIF.
    APPEND LS_SOLIX TO LT_SOLIX.
    ADD L_LENGTH TO L_OFFSET.
ENDWHILE.
CONCATENATE C_GR_DIR L_GRAPHIC-GRAPHICS '.BMP' INTO L_FILENAME.
CONCATENATE C_GR_DIR L_GRAPHIC-GRAPHICS '.BMP' INTO L_CONTENT_ID.
L_CONTENT_TYPE = L_GRAPHIC-HTTPTYPE.
L_OBJ_LEN = L_GRAPHIC-LENGTH.
ADD IMAGES TO EMAIL
CALL METHOD LO_MIME_HELPER->ADD_BINARY_PART
    EXPORTING
      CONTENT      = LT_SOLIX
     FILENAME     =
     EXTENSION    =
     DESCRIPTION =
      CONTENT_TYPE = L_CONTENT_TYPE
      LENGTH       = L_OBJ_LEN
      CONTENT_ID   = L_CONTENT_ID
ENDLOOP.
DATA: LO_DOC_BCS TYPE REF TO CL_DOCUMENT_BCS,
      P_SUBJECT TYPE SO_OBJ_DES,
      LV_GBT_MIME TYPE REF TO CX_GBT_MIME,
      LV_BCOM_MIME TYPE REF TO CX_BCOM_MIME,
      LV_DOCUMENT_BCS TYPE REF TO CX_DOCUMENT_BCS.
P_SUBJECT = 'TEST HTML EMAIL FROM SMARTFORM OUTPUT'.
TRY.
CALL METHOD CL_DOCUMENT_BCS=>CREATE_FROM_MULTIRELATED
    EXPORTING
      I_SUBJECT          = P_SUBJECT
      I_LANGUAGE         = SY-LANGU
      I_IMPORTANCE       = '5'
      I_SENSITIVITY      = 'F'
      I_MULTIREL_SERVICE = LO_MIME_HELPER
    RECEIVING
      RESULT             = LO_DOC_BCS
   CATCH CX_DOCUMENT_BCS INTO LV_DOCUMENT_BCS.
   CATCH CX_BCOM_MIME INTO LV_BCOM_MIME.
   CATCH CX_GBT_MIME INTO LV_GBT_MIME.
ENDTRY.
RECEIVERS
DATA: P_RECEIVERS TYPE TABLE OF SOMLRECI1,
      RECEIVER TYPE SOMLRECI1,
      L_MAIL_ADDRESS TYPE AD_SMTPADR,
      LO_BCS TYPE REF TO CL_BCS,
      LV_SEND_REQ_BCS TYPE REF TO CX_SEND_REQ_BCS,
      L_USERNAME TYPE UNAME,
      SEND_PARTNER TYPE BU_PARTNER,
      LI_SENDER TYPE REF TO IF_SENDER_BCS,
      LV_ADDRESS_BCS TYPE REF TO CX_ADDRESS_BCS,
      LV_SENT_TO_ALL TYPE BOOLEAN.
CLEAR RECEIVER.
RECEIVER-RECEIVER = '[email protected]'.
RECEIVER-REC_TYPE = 'U'.
RECEIVER-COM_TYPE = 'INT'.
APPEND RECEIVER TO P_RECEIVERS.
L_USERNAME = SY-UNAME.
CLEAR RECEIVER.
LOOP AT P_RECEIVERS INTO RECEIVER.
L_MAIL_ADDRESS = RECEIVER-RECEIVER.
TRY.
CALL METHOD CL_BCS=>CREATE_PERSISTENT
    RECEIVING
      RESULT = LO_BCS
   CALL METHOD LO_BCS->SET_DOCUMENT
     EXPORTING
       I_DOCUMENT = LO_DOC_BCS
   CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
ENDTRY.
CREATE SENDER
CLASS CL_CAM_ADDRESS_BCS DEFINITION LOAD.
TRY.
IF L_USERNAME NS '@'.
    L_USERNAME = SEND_PARTNER.
    TRANSLATE L_USERNAME TO UPPER CASE.
    LI_SENDER ?= CL_SAPUSER_BCS=>CREATE( L_USERNAME ).
ELSE.
    DATA: L_FROM_MAIL_ADDRESS TYPE AD_SMTPADR.
    L_FROM_MAIL_ADDRESS = L_USERNAME.
    LI_SENDER ?= CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS( I_ADDRESS_STRING = L_FROM_MAIL_ADDRESS ).
ENDIF.
CALL METHOD LO_BCS->SET_SENDER
    EXPORTING
      I_SENDER = LI_SENDER
CATCH CX_ADDRESS_BCS INTO LV_ADDRESS_BCS.
CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
ENDTRY.
create recepient
data: LO_RECEPIENT TYPE REF TO IF_RECIPIENT_BCS.
TRY.
CALL METHOD CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS
   EXPORTING
     I_ADDRESS_STRING = L_MAIL_ADDRESS
    I_ADDRESS_NAME   =
    I_INCL_SAPUSER   =
   RECEIVING
     RESULT           = LO_RECEPIENT
CATCH CX_ADDRESS_BCS INTO LV_ADDRESS_BCS.
ENDTRY.
TRY.
CALL METHOD LO_BCS->ADD_RECIPIENT
   EXPORTING
     I_RECIPIENT = LO_RECEPIENT
    I_EXPRESS    =
    I_COPY       =
    I_BLIND_COPY =
    I_NO_FORWARD =
CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
ENDTRY.
SEND EMAIL DOCUMENT
TRY.
CALL METHOD LO_BCS->SEND_REQUEST->SET_REQUESTED_STATUS
EXPORTING
    I_REQUESTED_STATUS = 'N'
TRY.
CALL METHOD LO_BCS->SEND
EXPORTING
   I_WITH_ERROR_SCREEN = SPACE
RECEIVING
    RESULT              = LV_SENT_TO_ALL
CATCH CX_SEND_REQ_BCS INTO LV_SEND_REQ_BCS.
ENDTRY.
ENDTRY.
ENDLOOP.
COMMIT WORK.

Header and Item text details not displaying in Capital and Import PO......

Hi Abapers,
           I copied the standard PO /SMB40/MMPO_A to ZForm, and customized like changing logos,address,footer etc.., after activating the form and while print previewing the standard purchase order all details displaying including header,item,terms of payment,delivery schedule.
         But for Import and Capital PO, the header,item,terms of payment,delivery schedule,etc.., details not displaying nor printing in the form.I didnt changed or customized the above windows in the form, but the above details want to display in the form for Capital and Import PO.
         I am getting all the details for Standard PO, but not for Capital and Import PO.
Let me give some suggestions for the above issue.
Thanks & Regards,
Dilip.B

Hi Surya,
                   Thanks for your reply.
I am using only one form for all the PO document types, and there is no codes with conditons blocking for Capital and Import PO's.
I am using the standard Purchase Order for this.
I checked the standard smartform, and their is no condition for blocking import and capital PO texts. The below is the code written for retrieving header text in smartform header window..,
* read IMG setting -- table T166K
* append texts allowed to GT_HD_TEXTS
* Head Text Part
CLEAR LS_TEXT.
LOOP AT LT_TEXTS INTO LS_TEXT.
SELECT SINGLE * FROM T166K INTO LS_T166K
WHERE DRUVO     = IV_DRUVO AND
BSTYP     = IS_EKKO-BSTYP AND
BSART     = IS_EKKO-BSART AND
TDOBJECT = LS_TEXT-TDOBJECT AND
TDID      = LS_TEXT-TDID.
IF SY-SUBRC = 0.
APPEND LS_TEXT TO GT_HD_TEXTS.
ENDIF.
CLEAR LS_TEXT.
ENDLOOP.
Thanks & Regards,
Dilip.B
Edited by: Dilipkumar B on Oct 22, 2009 7:58 AM

Boot Camp - No Device Found - Late 2011 MBP

Hello All,
Recently i have attempted to boot camp my late 2011 macbook pro using a bootable Windows 7 Professional IMG File and a bootable Windows drive. Creating the Bootable Drive had no issues, though, while trying to install windows onto the partitioned drive a message appeared wanting me to plug in the bootable USB drive - in which it was already plugged in. I have tried several methods 'supposedly' fixing the issue but all has failed - such as trying different USB's varying in capacity and brand, pressing option during boot up and so on.
I am aware that many other users face this issue is but it seems that there is no clear resolution. From my understanding, it is not possible to boot camp a mac which has an internal optical drive, using a bootable Windows Drive. However, my optical drive is broken and i am unable to install windows using a DVD/CD. Can someone please clarify if this is correct?
If i am correct and i am unable to install windows from a USB drive. Are there any free third party virtualization software that i am able to use, such as Parallels but for free?
Thankyou,
Cam

yeah as Csound1 says then if you are not going to play 3d computer games on windows
then installing windows as a virtual machine is 100% less troublesome in terms of drivers and difficult installs using iso's and the likes

Coming up empty

I am trying to re-link/ re-build a project in iMovie 11 that was created by iMovie in Sept 09.
It was created on an older iMac and hasn't re-opened when transferred to the new one.
I have the camera data and the project files and presumably all of the necessary elements. Movies, Still images, Still Thumbnails and so forth
But the project placeholder opens in the iMovie 11 Project window as "Empty"
[IMG]http://i51.tinypic.com/2usaqle.png[/IMG]
The clips are down below in the "Event Library" and I have gone through with Plist editor and ensured that the link between the project and the camera video files is pointed in the right direction but obviously I am missing something.
[IMG]http://i52.tinypic.com/ayvxl.png[/IMG]
The project files comes up in the Show Package contents
Any ideas?

So having tried most things for two hours and then posted a question.....I feel silly
I discovered the problem. The original folder for digitising was called MAsterchef (note the 'A')
and the project Masterchef (not capital)
When I relinked the PList editor to a Capital, it worked.

Refresh "parent" page when closing a cfwindow

When displaying a cfwindow and I click the x in the top right, how can I refresh the "parent" page?
The cfwindow has a small form that collects data in a couple of fields then submits in the cfwindow to a page that inserts the request, sends and email and says the action is complete.
This is my cfwindow:
<cfajaximport tags="cfform,cfwindow">
<cfwindow
   name="NewRequestWindow"
   center="true"
   closable="true"
   draggable="false"
   height="550"
   width="700"
   modal="true"
   initShow="false"
   refreshOnShow = "true"
   resizable="false"
   title="#WindowText#"
   source="NewRequest.cfm?pk=#pk#" />
<a href="#" onclick="javascript:ColdFusion.Window.show('NewRequestWindow')"><img src="../includes/images/add.png" alt="Add" title="<cfoutput>#WindowText#</cfoutput>" width="16" height="16" border="0" /></a>
Thanks, Cliff

This JavaScript will reload the current page:
document.location.reload()
From within your cfwindow it should work for the entire page.
copied from other post http://forums.adobe.com/message/3227674

How do I delete an Image Inserted on envelope?

When printing my Christmas envelopes, I selected "Image" to see how the envelope would look with an image placed to the left of my return address. I am able to change the image, but I can't figure out how to delete it altogether and print without any image.
Can anyone give me the simple answer? I'm sure it is staring me in the face, but I can't find it. Thanks!!!

> I can't find the img tag that contains the image. It
also won't let me click
> on the image.
url address to the uploaded page?
You have the page open in dreamweaver?
In Design view?
Change to split design and code view (see the F1 help. The
three buttons top
left of design view window)
Click the mouse on the image.
Does the Property Inspector now show the properties of that
image?
And the code portion of the window shows that <img>
tag?
Now click the delete key. Image gone.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Boot camp with usb media

I have an .img file of Windows 7 that I downloaded from my university's software license. Disk Utility and Boot Camp assistant both failed to image my USB drive so I did it with terminal. However, when I go to install it, boot camp says that it can't find my windows install media. What do I need to do to install Windows from that img file?

Basically you may not have a supported model. Here's a link to a possible work around. You might try reading the whole post for different way's of doing it. There's like 5 pages so be patient. Some of the earlier Mac's can't boot via USB is one of the issues.
Make sure Lion is updated all the way as I believe Apple added the USB W7 installer option in 10.7.2?
Worse case scenerio you may have to just burn it to a disk, but it has to be done in a way that makes it bootable, simply dragging the files over doesn't work.

Convert Canvas to Image in sapui5

Convert canvas to image using controller in sapui5,I have tried these codes but nothing works..Please help me.
Here is my code:
onOkCloseButton : function(oEvent) {
var view = this.getView();
var canvas = view.byId("canvas");
var dataURL = canvas.toDataURL("image/png");
// var window = window.open();
// window.document.write('<img src="'+dataURL+'"/>');
// window.location = (canvas.toDataURL('image/png'));
// var dataURL = canvas.toDataURL();
// $.post("http://localhost:31651/Registration_Card/index.html", { img : canvas.toDataURL() })
// .done(function(data) {
// alert("Image Sent to Server "); //on completion
// Canvas2Image.saveAsJPEG(canvas);
// var oImgJPEG = Canvas2Image.saveAsJPEG(canvas, true);
// Canvas2Image.saveAsPNG(canvas, false, 100, 100);
oEvent.getSource().getParent().close();

Ho to save a canvas as an image in J9 and CDC.
It seems that I already have resolute by means of the tool Jimi de Sun. Anyway I will thank for any new contribution.
Thanks

LENOVO Y2P stuck at Lenovo Splash Screen

I partitioned my SSD into two parts trying to install another OS to the newly unallocated partition. Rebooted into boot menu, but couldn't find my USB drive in the menu. Anyways I said nevermind it's okay and decided to boot normally. It booted without any problem and then for whatever reason I shut down the pc. Turn it back on a little later, now it's stuck at the LENOVO splash screen, won't boot no matter what I do

Do you have a Windows 8 or 7 recovery media? If so, boot to that, enter advance options and do a system restore or boot fix (boot fix is your last option if using a Windows 7 recovery img). This might fix the boot but, the okr system is broken for good unless you purchase recovery disks.

[Solved] Gummiboot fails to load Initramfs

I installed Arch on two partitions, one encrypted with LVM on LUKS
(sda2) and a separate /boot partition (sda1). I use gummiboot as my bootloader.
The gummiboot entry which loads the initramfs looks as follows:
title Arch linux
efi \EFI\arch\vmlinuz-linux.efi
options initrd=\EFI\arch\initramfs-linux.img cryptdevice=/dev/sda2:vgroup root=/dev/mapper/vgroup-root rw acpi_backlight=vendor
After each kernel update (i.e. rebuilding the initramfs) I manually copy
the images to where the loader entries point.
cp /boot/initramfs-linux.img /boot/EFI/arch/
cp /boot/initramfs-linux-fallback.img /boot/EFI/arch/
cp /boot/vmlinuz-linux /boot/EFI/arch/
cp /boot/vmlinuz-linux /boot/EFI/arch/vmlinuz-linux.efi
(Actually I'm not sure if I need the .efi extension on vimlinuz-linux,
so I copy them both...)
When this Laptop boots, it shows the gummiboot loader and I select the
"Arch Linux" entry. With the last kernel update, when I hit the "Arch
Linux" boot entry, the screen goes black for some seconds, then the
whole screen gets pixelated with some colorful static noise.
It looks like the initramfs is corrupted/not found, so chrooted into my
system from the live installer and reinstalled the kernel, mkinitcpio
and gummiboot ('linux' 3.12.7-2, 'gummiboot' 41-1, 'mkinitcpio' 16-2).
I also re-ran
gummiboot install
Still, the system refuses to boot.
Since I get no error output at all, I can't provide much more debug
information. I am aware of a rather large number of threads but in
virtually all of those cases the boot process crashes with some helpful
error messages...
Anyone got some helpful hint? It looks like I am missing something
obvious.
Last edited by okyr (2014-01-20 15:34:28)

By the way, why are you copying your bootimages manually? Your folders seem odd to me, but maybe thats just a lack of information on my side.
An loader entry on my box looks like this:
root@x230 /boot/loader/entries # cat arch.conf
title Arch Linux
linux /vmlinuz-linux
initrd /initramfs-linux.img
options root=/dev/sda2 quiet rw init=/usr/lib/systemd/systemd add_efi.memmap acpi_osi="!Windows 2012"
The .img files are simply in /boot where mkinitcpio puts them after the kernel update.

How to change alpha value in pixel

I am trying to alter the alpha values in a pixel array. I can change the RGB values, but changing the alpha seems to have no effect. Hope you can help. Thanks.
import java.awt.*;
import java.awt.image.*;
import java.io.*;
import com.sun.image.codec.jpeg.*;
import java.util.Random;
import java.awt.Toolkit;
public class alterImage extends Component {
public FileOutputStream fos = null;
public File fc = null;
private static Frame window;
public void paint (Graphics g){
Toolkit theKit = window.getToolkit();
Image img = theKit.getImage("originalImage.jpeg");
img = img.getScaledInstance(100,100,1);
MediaTracker mtracker = new MediaTracker(this);
mtracker.addImage(img, 0);
try {
mtracker.waitForID(0);
} catch (Exception e) {}
int w = img.getWidth(this);
int h = img.getHeight(this);
int[] pixels = new int[w * h];
PixelGrabber pixs = new PixelGrabber(img, 0, 0, w, h, pixels, 0, w);
     try {
     pixs.grabPixels();
     if (pixs.getColorModel().hasAlpha())
     System.out.println("hasAlpha");
          } catch (InterruptedException e) {
            System.err.println("interrupted waiting for pixels!");
            return;
// alter pixel values
for(int i = 0; i < pixels.length; i++){
     int alpha = (pixels[i] >> 24) & 0xff;
     //System.out.println("alpha " + alpha);
     int red   = (pixels[i] >> 16) & 0xff;
     //System.out.println("red" + red);
     int green = (pixels[i] >> 8) & 0xff;
     //System.out.println("green" + green);
     int blue = (pixels[i]      ) & 0xff;
     //System.out.println("blue" + blue);
     green /= 2;   // green is effected
     alpha /= 2;   // alpha is not effected
     pixels[i] = (alpha << 24) | (red << 16) | (green << 8) | blue;
// create new image with altered pixel data
BufferedImage image = new BufferedImage(w, h, BufferedImage.TYPE_INT_RGB);
image.setRGB(0, 0, w, h, pixels, 0, w);
// write new image to file
try {
fc = new File("newImage.jpeg");
fc.createNewFile();
fos = new FileOutputStream(fc);
JPEGImageEncoder encoder = JPEGCodec.createJPEGEncoder(fos);
encoder.encode(image);
fos.flush();
fos.close();
// show image in window
Image img2 = theKit.getImage("newImage.jpeg");
g.drawImage(img2, 0, 0, 100, 100, this);
} catch(IOException e) {}
// end paint
public static void main (String arg[]){
     window = new Frame ("Alter Image");
     window.add(new alterImage());
     window.pack();
     window.setSize(100,100);
     window.show();
// end class
}

It only makes sense to apply transparency in respect of another image that this one is to appear 'on top of'; this is done by performing a comparison on the pixel value for each of the two images, altering in favour of the 'on top' image if transparency for that pixel is low, or for the 'underneath' image if transparency for that pixel is high.
Although tricky (for me at least, perhaps not for you!), using the WritableRaster from BufferedImage's GetWritableRaster() method lets you accomplish this. Look here for more:
http://java.sun.com/j2se/1.4.2/docs/api/java/awt/image/WritableRaster.html
Once you have created a composite image of the two source images, that can then be saved as a separate JPG, GIF or whatever. Look here too:
http://java.sun.com/docs/books/tutorial/2d/display/compositing.html
Good luck!
Chris.

Need help with this java thing

i got a script for virtual keyborad but i don't know much javascript
so need your help to fit this script to my htmldb application .
i have page with textare name P2_MESSAGE_DESC
i put the image near the textarea and i want the textarea to "get" what i type in the keyboard image.
here is the hava script :
<SCRIPT language=JavaScript>
//This var is changed on Unload from talkback to 'false' in order to not generate this onUnload
var DoUnload = true;
//var theInputName = opener.document.myform.inputName.value;
var theInputLength;
function doInsert(theChar) {
   opener.document.myform(opener.document.myform.inputName.value).value += theChar;
function doDelete() {
theInputLength = opener.document.myform(opener.document.myform.inputName.value).value.length;
if(theInputLength > 0) {
     if(opener.document.myform(opener.document.myform.inputName.value).value.substring(theInputLength-1,theInputLength)=="\n") {
          opener.document.myform(opener.document.myform.inputName.value).value = opener.document.myform(opener.document.myform.inputName.value).value.substring(0,theInputLength-2);
     } else {
          opener.document.myform(opener.document.myform.inputName.value).value = opener.document.myform(opener.document.myform.inputName.value).value.substring(0,theInputLength-1);
function doSubmit() {
   //opener.document.myform.submit();
   window.close();
</SCRIPT>
<IMG height=159 src="#WORKSPACE_IMAGES#kbd.GIF" width=341 useMap=#HebMap border=0>
<MAP name=HebMap>
<AREA shape=RECT coords=272,94,297,120 href="javascript:doInsert('.')">
<AREA shape=RECT coords=246,94,271,120 href="javascript:doInsert('ץ')">
<AREA shape=RECT coords=220,94,245,120 href="javascript:doInsert('ת')">
<AREA shape=RECT coords=194,94,219,120 href="javascript:doInsert('צ')">
<AREA shape=RECT coords=168,94,193,120 href="javascript:doInsert('מ')">
<AREA shape=RECT coords=142,94,167,120 href="javascript:doInsert('נ')">
<AREA shape=RECT coords=116,94,141,120 href="javascript:doInsert('ה')">
<AREA shape=RECT coords=90,94,115,120 href="javascript:doInsert('ב')">
<AREA shape=RECT coords=64,94,89,120 href="javascript:doInsert('ס')">
<AREA shape=RECT coords=38,94,63,120 href="javascript:doInsert('ז')">
<AREA shape=RECT coords=286,67,311,93 href="javascript:doInsert(',')">
<AREA shape=RECT coords=260,67,285,93 href="javascript:doInsert('ף')">
<AREA shape=RECT coords=234,67,259,93 href="javascript:doInsert('ך')">
<AREA shape=RECT coords=208,67,233,93 href="javascript:doInsert('ל')">
<AREA shape=RECT coords=182,67,207,93 href="javascript:doInsert('ח')">
<AREA shape=RECT coords=156,67,181,93 href="javascript:doInsert('י')">
<AREA shape=RECT coords=130,67,155,93 href="javascript:doInsert('ע')">
<AREA shape=RECT coords=104,67,129,93 href="javascript:doInsert('כ')">
<AREA shape=RECT coords=78,67,103,93 href="javascript:doInsert('ג')">
<AREA shape=RECT coords=52,67,77,93 href="javascript:doInsert('ד')">
<AREA shape=RECT coords=26,67,51,93 href="javascript:doInsert('ש')">
<AREA shape=RECT coords=247,40,272,66 href="javascript:doInsert('פ')">
<AREA shape=RECT coords=221,40,246,66 href="javascript:doInsert('ם')">
<AREA shape=RECT coords=195,40,220,66 href="javascript:doInsert('ן')">
<AREA shape=RECT coords=169,40,194,66 href="javascript:doInsert('ו')">
<AREA shape=RECT coords=143,40,168,66 href="javascript:doInsert('ט')">
<AREA shape=RECT coords=117,40,142,66 href="javascript:doInsert('א')">
<AREA shape=RECT coords=91,40,116,66 href="javascript:doInsert('ר')">
<AREA shape=RECT coords=65,40,90,66 href="javascript:doInsert('ק')">
<AREA shape=RECT coords=39,40,64,66 href="javascript:doInsert('\'')">
<AREA shape=RECT coords=13,40,38,66 href="javascript:doInsert('/')">
<AREA shape=RECT coords=303,14,328,39 href="javascript:doInsert('0')">
<AREA shape=RECT coords=277,14,302,39 href="javascript:doInsert('9')">
<AREA shape=RECT coords=251,14,276,39 href="javascript:doInsert('8')">
<AREA shape=RECT coords=225,14,250,39 href="javascript:doInsert('7')">
<AREA shape=RECT coords=199,14,224,39 href="javascript:doInsert('6')">
<AREA shape=RECT coords=173,14,198,39 href="javascript:doInsert('5')">
<AREA shape=RECT coords=147,14,172,39 href="javascript:doInsert('4')">
<AREA shape=RECT coords=121,14,146,39 href="javascript:doInsert('3')">
<AREA shape=RECT coords=95,14,120,39 href="javascript:doInsert('2')">
<AREA shape=RECT coords=69,14,94,39   href="javascript:doInsert('1')">
<AREA shape=RECT coords=13,14,67,39 href="javascript:opener.nextField()">
<AREA shape=RECT coords=273,40,328,66 href="javascript:doDelete()">
<AREA shape=RECT coords=78,121,258,147 href="javascript:doInsert(' ')">
<AREA shape=RECT coords=272,121,327,147 href="javascript:doInsert('\n')">
</MAP>i just need to figure out the :
opener.document.myform(opener.document.myform.inputName.value).value += theChar;
how to change it to my p2_message_desc ?
thanks

thanks carl ,
i changed it to:
document.getElementById('P2_MESSAGE_DESC').value += theChar;
and it put me the keyword in the textarea.
one problem left :-(
i want it to put the keyword where the cursor is for example
if i have this sentence in my textarea:
i love oracle htmldb application
and cursor is before htmldb word and i enter the word (push the virtual keyboard bottons):
develope
the sentence will be:
i love develope oracle htmldb application .
now if i do that i'm getting:
i love oracle htmldb application develope.
i hope you get my point.
thanks

Windows 7 as *.img?

Similar Messages

Maybe you are looking for