Windows 7 auf MacBook Pro 13 Unibody OHNE SOUND!

Tag,
ich habe gerade per BootCamp Windows7 auf meinem MBP13 Unibody installiert.
Klappt auch alles ganz fein, bis auf den Sound... Der is nämlich garnet da...
Aus dem Soundanschluss leuchtet es rot (unter OS X läuft der Sound...).
Ich habe die Treiber die auf der Leopard CD waren installiert... Habe auch schon versucht Treiber von der RealTek.com Seite zu laden und zu installieren... Alles ohne Erfolg...
Das Witzlose an der Geschichte ist, dass der Pegel in Win7 beim Abspielen von Musik schön am zappeln ist, als wär alles toll. Auch erkennt er, ob nen Kopfhörer eingesteckt ist oder nicht...
Ich bin Ratlos und weiss nicht mehr weiter
Ich mag doch nur meinen Sound wieder haben...
Habe jetzt im Forum gesucht aber nichts gefunden was mir geholfen hat.

Englisch bitte.. Alle hier verstehen Deutsch nicht, obwohl ich verstehe dich weil ich sprich jiddisch.

Similar Messages

Bootcamp 3.1 Macbook Pro 15 Unibody Late 2008 fans working now?

I just upgraded bootcamp to 3.1 on my macbook pro 15 unibody late 2008. I ran Windows Experience Index under win7 Pro 64bit and the fans were humming loud and clear during the test which is a good sign. It runs about the same as when using 9600 in Leopard (very warm). Two finger right click is still a little sketchy, but at least I won't be using my macbook as a frying pan any time soon.

Resetting SMC could solve the problem.
Intel-based Macs: Resetting the System Management Controller (SMC)
And you need to install more RAM, I think.

Airport not available on MacBook Pro 15 unibody mid 2009, PLEASE HELP!!!!

Ok, so I just recently put in a new hard drive and battery by myself, since my original MacBook Pro hard drive became "corrupted" most likely due to a parallel desktop software I was using. Anyway so I finally install everything on the new hard drive and airport is not working. The icon is NOT EVEN THERE on the menu bar. I go into Network and the only thing I've got is Ethernet and Firewall. I've tried the "+" thing, and it didn't work. I then went into "Assist Me" , then "Diagnostics" and the airport option is greyed out, so is the external modem. Oh, and the operating system is Snow Leopard OS X 10.6.3. Has a 2.8 GHz Intel Core 2 Duo Processor.
I also deleted the "SystemConfiguration" Folder and found something interesting. The "com.apple.airport.preferences.plist" was never there and when I reboot, the "com.apple.network.identification.plist" also disappeared. I had to drag it back into the folder from the desktop where I put a copy just in case something weird happened, which it did.
I checked System Profiler, clicked on AirPort and it gives me stuff under "Software Versions", so I'm guessing it's acknowledging that THERE IS a card and can give me all the information for it, but I can't get the mac to use it. I reset the PRAM AND SMC and still nothin.
So, I figured it must be hardware, right? So I open the mac like i did when I installed the new hard drive and battery, and I CANNOT FIND THE DARN AIRPORT CARD. On the mid 2010 models it's with the bluetooth card at the top and I've tried looking online for ANYONE, who has tried to get to the airport card on the mid 2009 model for the MacBook Pro 15 unibody. And found nothing. I think it's in the clutch, but I'm too scared to touch that area. Does anyone else have any ideas or have I covered all my bases?
I REALLY DO NOT want to go to Apple. I don't have AppleCare and don't have the money to have them poke around and tell me the same thing I already know. And I spent way too much on this computer to not be able to use it to full capacity. PLEASE HELP!!!!!!

From Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices
Your 2009 MBP is not compatible with AirDrop to an iPhone

Flickering intermittent lines on my display (Macbook Pro 15in Unibody mid-2009)

HI all,
My MacBook Pro 15" Unibody Mid 2009 is suddenly displaying strange artifacts across the display - flickering lines of color (seems like red is most common). When this happens if i flex the machine body i can usually get it to disappear. Running an external display works totally fine, even while lines are appearing on the built in display. Another strange symptom - while this is happening sometimes, when i am dragging a file in Finder, it refuses to release from 'dragging' - ie... the OS believes i still have the mouse button pressed down (whether using a trackpad or external mouse) and continues to do so until a restart or sometimes a force quit.
I suspect the display cable (which i have reseated to the connector), though the most effective quick fix while this is happening is pressure on the bottom, middle of the case (which of course worries me).
I should add, tho it seems strange and might be circumstantial - this all started after installing mountain lion (from snow leopard) and the artifacts dont seem to happen when i am running in boot camp.
Hoping this can be resolved by some minimal DIY fix...
Thanks in advance for any help!

Hi,
Not really a suggestion as such, but I have just installed a WD Scorpio Blue 500gb HDD myself. Unfortunately I've been having some issues with it and started a topic on this site to find an answer:
http://discussions.apple.com/thread.jspa?threadID=2518783&tstart=0
I thought you might be interested as it could affect your decision.
Rh

My new HDD for Macbook pro 13" unibody is not recognized and I am using a new SATA cable

Hey everyone,
I have a particular problem that I cannot seem to find an answer to. My new 500gb internal drive for my Macbook Pro 13" unibody is not recognized. The old HDD broke on me so I bought a new one but my macbook pro would not recognize it. To troubleshoot that issue I purchased the SATA cable and replaced the old with the new. The new HDD still will not show up in disk utility.
Please let me know what you think I may have missed or should do.
Thank you

jc1388,
Bring it to an Apple store Genius bar (make an appointment, so you don,t have to wait around forever) they will diagnose it for free and tell you your options/pricing. They have more extensive testing tools, maybe your logic board is failing/failed.
best of luck

Windows xp on macbook pro 2011 paralles on the monitor does not work

windows xp on macbook pro 2011 with paralles desktop 6 monitor is working to evil;
windows 7 with bootcamp work but I activate the software does not start on reboot, I apologize for the translation, thanks

Post in your native language. There are excellent translators.

How to install Windows 8 on Macbook pro with retina display ?

Hi - How to install Windows 8 on Macbook pro with retina display ?
I am pretty new to the apple world. Tried doing it through bootcamp but did not success.
I am not interested to install it through Parallels or Fusion. Plz guide.
Thanks !

OK, use Windows 8 in Bootcamp. Be aware that there are no Bootcamp drivers for Windows 8 yet. So you may experiance not only delays but display problems, freezing, crashes and other problems.
Here is the Bootcamp forum. Make sure you read all the posts from people experiencing Windows 8 problems with Bootcamp. https://discussions.apple.com/community/windows_software/boot_camp

How to install Windows 8 on Macbook Pro w/ Retina Display?

Hi,
I'm new to Macbook Pro w/ Retina Display. I'm a non-tech guy. Well, I'm familiar with Windows PCs but not familiar with Macbook Pros and OS X.
Please if you people can step me step by step that how to Install Windows 8 on Macbook Pro w/ Retina Display 15 inch.
Because recently, Apple released OS X Update 10.8.3 which includes support for Windows 8 in Boot Camp.
I will be very thankful. Please help!
Thanks

Hi Mende1,
Thanks for the fastest reply. Well, As I said I'm non tech noob on Macbook Pro.
Well, The Guide is simple but there are few questions which I'm not able to understop still.
1. How to get the copy of Windows 8? I have bought Windows 8 Ultimate and I have Genuine Key with me but I don't have files.
2. Secondly, I have Bluetooth Apple Wireless Keyboard and Magic Mouse, Is this compatible with Windows 8?
Thanks

Cannot boot from usb flash to install Windows 8 on Macbook Pro 13"

Hi! All
I have a 2011 Macbook Pro 13" and I want to install Windows 8 on it. I use bootable USB stick, which I can boot fine from on my PC, so I assume it's not the USB stick that is a problem. First of all Bootcamp didn't recognise it. Fine, I partitioned the laptop's hard drive myself. Then while rebooting I held the Option key to manually select the USB drive, but it did not appear on the list. As someone suggested on the internet I even replugged USB stick to another slot during while on that screen, but it didn't help too.

Welcome to Apple Support Communities
You can install Windows from a USB drive in one of these Macs:
- MacBook Pro with Retina display.
- Mac mini (Mid 2010 and newer).
- MacBook Air.
- iMac (Late 2012).
You don't have any of these computers, so you can't install Windows through a USB disk. Its firmware doesn't allow you to start up from your Windows installation disk.
You have to buy Windows 8 on a DVD. You need a System Builder version, which you can buy at Amazon or NewEgg. Follow Apple's steps to install Windows on the MacBook Pro > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf

I transferred my iTunes library from Window PC to MacBook pro and now I cant play songs that I purchased with an earlier ID and Password. How can I get around this problem?'t

I transferred my iTunes library from Window PC to MacBook pro and now I cant play songs that I purchased with an earlier ID and Password. How can I get around this problem?

Authorize the computer.
iTunes Store: About authorization and deauthorization - http://support.apple.com/kb/HT1420 - and another helpful post: https://discussions.apple.com/message/17828050

Macbook Pro 15in Unibody Wi-Fi Drop and Stay Off / Total System Freeze

Hi.
Up until about two weeks ago I had no issues with my mac. Then I installed Lion and about two days later the following occurred:
Macbook Pro 15in Unibody - drops wifi connection with numerous routers and different locations. I turn Airport Utility off and it won't ever turn back on. Restart is the only option... Alternatively the mac will sometimes just freeze and I can't move the cursor or type at all. Booted into BOOTCAMP partition and that freezes as well.
So, now I have bought a new Solid State Drive and done a fresh install of Snow Leopard. About 5 seconds in and it froze again - so I restarted - and about 20 mins later the Airport Utility did the same issue, dropped the wifi and wouldn't turn back on after I turn it off.
Reset PRAM, Airport Utility did the same again. So far, touch wood, only the one freeze since the new HHD and PRAM reset...
ANY IDEAS AT ALL WHAT THE HECK THIS CAN BE? It is SO annoying I have been scouting the net but can't see an obvious solution. I have however been shocked at sooooo many cases similar to this with the Macbooks...
Thanks guys

Yes it will work just fine. I sell and set them up quite a bit with both PC's and Macs.
All N routers at the moment are all based on draft N protocol, even Apple's own Airport routers. So the Belkin N+ will work at N speeds if you set it to N mode only. Ofcourse for broad compatibility with all sorts of WiFi devices it is best to leave it in mixed mode.
For some background, i have used all sorts of makes of routers from Compaq/TrendNet (favourite)/Microsoft/Netgear (current favourite)/Dlink...and so on over the years, NOT any issues.
Apple's Airport extreme base stations (which are still draft N) aren't any more compatible than a Netgear or Belkin N router.

How to completely remove mac os and install windows 7 on macbook pro with retina display 15 inch

how to completely remove mac os and install windows 7 on macbook pro with retina display 15 inch

There's not much sense in purchasing a Mac to run only Windows on it. Keep in mind that drivers for Windows are a secondary concern for Apple. While Windows will typicall run fine, things like power managment are not optimized under Windows (you'll get less time on battery while running Windows). You will also not be able to install firmware updates. Firmware updates might be necessary whether you run Windows or OS X as they are updates to the code in your hardware and are not OS-specific. You must be running OS X in order to install a firmware update. You can do this even if you boot off of an external drive with OS X installed on it. At the very least, you should keep just a small partition for OS X on your internal drive.

Can I install Windows 8 on MacBook Pro retina?

I need to install Windows 8 or 7 in Boot Camp in order to run my embroidery software. What specific form of Windows do I need to install a full version (not an upgrade, since I do not have Windows on the MacBook Pro)? Also, I understand that Boot Camp 5 will not run Windows 8.1. Should I buy Windows 7 and steer clear of 8 altogether?
My Bernina and Floriani embroidery software will run on either Windows 7 or 8.
Many thanks in advance,
Joanna

Yes but with that version, style, it is tied to the first set of hardware, computer, it is installed on. So in theory it can't be moved to another set of hardware, computer.
Message was edited by: LowLuster

Can I run Quickbooks Contractor for Windows on my Macbook Pro with Bootcamp ?

Can I easily run Quickbooks Contractor for Windows in my Macbook Pro and exchange QB data files with my accountant ?

You can run any Windows program once you install Windows on your computer using either Boot Camp assistant or a VM like Fusion, Parallels, or VirtualBox.

How to get clamshell mode with Windows 7 on Macbook Pro?

Hi,
I am running Windows 7 on Macbook Pro using bootcamp. In OS-X, I can use this cool clamshell feature wherein after putting the MBP to sleep by closing the lid, as soon as I connect an external keyboard, mouse & monitor, I get the display on the monitor and immediately start using the keyboard & mouse too, converting the laptop instantaneously to a desktop.
I am trying to do the same thing on Windows 7, close the lid of the laptop to put it to sleep, connect my external monitor, mouse & keyboard, but however the laptop never wakes up (even after moving the mouse & pressing keys in the keyboard). I tried several things in Windows 7. Under Power Options, Disabled "selective Suspend of USB", but that did not help. Next, in the "Device Manager", for the "Root USB Hub" & "Generic USB Hub", I tried to set "Allow this device to wake up the computer", under Properties -> Power Management, but that option is grayed out. I tried to experimented with Sleep types like S1, S2, S3, but except for S3, the other two are shown as "not supported by firmware" (using powercfg option in command line). Countless hours wasted on google search to get this working with no success
I would greatly appreciate any help on this issue.
Thanks,
Sri

@mkultraviolent,
Thanks for the quick reply.
That seems to be a useful workaround, but I do not find the option mentioned in Display/ Nvidia control panel. However, I find an option in the "Power Options" which has a "Do Nothing" option in the combo box to select what "Closing the Lid" does. Is that what u are referring to?
Also, one problem in this approach is, if we do not sleep when the display is closed, that will keep the internal display (laptop's display) running in clamshell mode even after the lid is closed? (which will heat up the laptop badly).
The exact option I am looking for is, while the laptop is in sleep & lid closed state, connecting the external keyboard/mouse/monitor and pressing a key in the keyboard or moving the mouse should wake the computer from sleep. If this happens, the internal display won't be running. I am able to achieve this in OS-X.
In Windows7, I have a workaround by which I can almost achieve this result, wherein, while the laptop is in lid-closed, sleeping state, after connecting the external devices (keyboard/mouse/monitor), I open the laptop's lid for a fraction of second, quickly move my finger over the touchpad & close the lid again. This wakes up the laptop, & while it is waking up, Windows realizes that the lid is closed and that external devices are connected and gets into clamshell mode (I have verified that in this state, the internal display is not running).
This workaround was fine so far, but I got this hengedocks docking station for my macbook, and I am no longer able to use the workaround, because, after plugging my macbook into the docking station, I cannot open the lid. So, the only option is to make Windows7 realize that external devices are connected & wake up on external keyboard stimuli (Hence the question).
If my question is not clear, this video kind of explains what I want to achieve:
http://www.youtube.com/watch?v=YOKu9uwdwZI&feature=player_embedded
Appreciate ur help!

Windows 7 auf MacBook Pro 13 Unibody OHNE SOUND!

Similar Messages

Maybe you are looking for