Windows 7 backup error code 0x81000019 (Backup Failure)

Running "backup" failed with error code 0x81000019.
After days of trouble shooting, I narrowed the problem to "com+ event system" service. It showed "started", I restarted it and backup worked. If I restart computer, I have to restart the service again for backup to work.
A "TEMPORARY" solution is a desktop batch file that contains the following lines:    net stop /Y "COM+ Event system"
net start "COM+ Event System" exit
(Run this batch file before doing a backup.)
I have Windows 7 Ultimate (x64). I did a clean install which includes the system partition. No other problems, just this one.

Hi BobK1110,
Thanks for the post!
What’s your error message when you got the error code 0x8100019? Please check this thread:
http://social.technet.microsoft.com/Forums/en-US/w7itprogeneral/thread/fce6950d-c06d-4dd0-a850-67022db4fe04
Do you have the same error message?
If so, this is a known issue, as a workaround, you can increase the system reserved partition size to 500MB.
Meanwhile, thanks for sharing your solution on this issue, it could be beneficial for other community members.
Regards,
Miya
This posting is provided "AS IS" with no warranties, and confers no rights. | Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer
your question. This can be beneficial to other community members reading the thread.

Similar Messages

Library Update rqstd on Aperture 3.2; now won't open get msg "error opening data base for the library "~/Pictures/Aperture Library.aplibrary" TIme machine won't load backup "error code -8003"

Aperture working on OS 10.6.8 then Library Update rqstd on Aperture 3.2; said yes;
now Aperture won't open, get msg "error opening data base for the library "~/Pictures/Aperture Library.aplibrary"
TIme machine won't load backup "error code -8003"
Tried reloading Aperture 3.2 but get same result.

You’re running an outdated copy of Safari on your Desktop. That won’t work.
In the Finder, select
Go ▹ Applications
from the menu bar, or press the key combination shift-command-A to open the Applications folder. Check that the Safari application is in that folder. If it is, use it, and delete the copy on your Desktop. Never move or copy built-in applications.
If you've deleted Safari from the Applications folder, back up all data, then reinstall OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

RasClient:dialed a connection named "VPN Connection Name " which has failed. The error code returned on failure is 789 on windows 8.1

Hello,
i am trying to connect to my corporation VPN Server " ISA 2006" using windows 8.1 client built in VPN, but its returned the following error:
Event ID 20227: dialed a connection named "VPN connection Name" which has failed. The error code returned on failure is 789.
VPN connection is working fine with windows XP and windows 7 with no issue , this error is only appear when try to connect to using windows 8 client machine.
this error is shows only on windows 8.1 client , same procedures used to enroll the certificate from internal CA " IPsec Type" is followed .
below are the ISA server specifications:
VPN Server : ISA 2006.
windows Server version 2003.
appreciate your quick help and reply .
Thanks

Thanks for your reply.
i would like to add another point for this case, that when we are trying to enroll a certificate from internal CA web enrollment directly using windows 8 " internet explorer 11" , its install a certificate without Digital
Signature and non-repudiation in key usage property, then when try to connect , its will give the above error 789 ..
when try to enroll a certificate into windows 7 " internet explorer 10" and then export and import this certificate into windows 8.1 machine "with the name of
windows 8.1 machine" into windows 8.1 machine, the VPN is working normally and without issue.
The properties of the Certificate are difference between windows 7 machine and windows 8 machine is key usage missing the Digital Signature and non-repudiation properties when enroll
from windows 8.1 " internet explorer 11", this is in fact because of
we don't have an option for key usage " both" when subment a certificate on web enrollment page from windows 8 machine ,, the only option available is exchange "
no signature and both option available "
i believe that there is something wrong when using windows 8.1 internet explorer 11 so its gave a certificate with wrong key usage property .
appreciate your quick help in this .
thanks

Windows update error code 8e5e0147 help!

I get the error code 8e5e0147 from windows update while trying to do 8 different updates. ive tried doing different things to fix this that I find online but nothing has help, can someone please help fix this?

Please review this previous post:
Cannot install some Windows updates, error code 8e5e0147
Carey Frisch

Windows NT Error code = 87 when stopping Oracle9iASHTTPServer service

We are using Portal 3.0.9.8.2
When you stop the the Oracle9iASHTTPServer service in NT crashes
Dr Watson and with Windows NT Error code = 87 (could not attcah
application).
When we restart the service it works fine.

We are using Portal 3.0.9.8.2
When you stop the the Oracle9iASHTTPServer service in NT crashes
Dr Watson and with Windows NT Error code = 87 (could not attcah
application).
When we restart the service it works fine.

Windows update error Code 80072EF3

Greetings!
I have a Dell PowerEdge T320 that is experiencing this issue: Windows update error Code 80072EF3
I followed instructions in article
http://support.microsoft.com/kb/947821/en-usand ran the DISM.exe with the offline source (my DVD drive) to avoid using the windows update component that appears to be damaged. Command completed, but no effect on the error.
Last successful update session was 7/8/2014
Security Update for Windows Server 2012 (KB2922229) cancelled. Tried to install manually. Not applicable.
Update for Windows Server 2012 (KB2811660) Failed. When running the manual download get the message it is already installed. Same for KB2855336
Any help appreciated.
Below is the detailed update history.
This link contains the log for the DISM repair tool:
https://www.dropbox.com/s/3aufjud0wd0n53n/CBS.zip

Hi,
Please re-run Windows update and then provide us the windowsupdate.log file for check. It is under C:\Windows.
Thanks.
Jeremy Wu
TechNet Community Support

Windows phone error code 80188301,. please need help

i am getting an error while updating my windows phone. windows phone error code 80188301,.
please need help

Hi,
If issue persists after using the solutions provided by Aman Raizada, then I would suggest you ask the question in Windows Phone support forum:
http://www.windowsphone.com/en-US/how-to/wp-support
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

The system cannot find the file specified.Windows sockets error code:2.

Hi All,
I am on MDM 5.5 SP6.
I am getting the following error message when trying to logging in to the DM.
The system cannot find the file specified.Windows sockets error code:2.This application will now exit.
Runtime Error :
Program C :\Program Files\SAP MDM 5.5\Data Manager\Datamanager.exe
R6025.
-Pure virtual function call.
And in console also the MDM server is stopped after getting the above error message.
Can anybody tell me what could be the problem?
Thanks & Regards
Sireesha.

Hi Sireesha,
According to me, there can be 3 problems,
1. Kindly check whether the MDM server is stopped. If it is, then restart the MDM Server and Load the repository with Update indices.
2. If this error is coming with every repository, the problem will be either in the Version mismatch of the Server and the GUI's you are using. Kindly ensure that the versions for the MDM server and the MDM Gui's Match.
3. If only Data manager Client is giving the problem, then you can un-install and install the DM GUI again.
Along with this, please refer to the link below :
[[The system cannot find the file specified.Windows sockets error code:2.;]
Hope it helps.
Thanks and Regards
Nitin jain

Getting Error while doing Control Panel - Windows Update Error code is 80070103

Getting Error while doing Control Panel -> Windows Update Error code is 80070103. The optional Windows 7 update is
Microsoft - Other hardware - WinUsb Device
Please provide your email ID to send the Error screen shot.

Hi!
Check the following link to see if it solves your problem:
http://support.microsoft.com/kb/952032
Best regards
Andreas Molin
Andreas Molin | Site: www.guidestomicrosoft.com | Twitter: andreas_molin

My Pavillion m7760n has stopped installing windows updates, Error Code 0x80070020. Unable to find a

my Pavillion m7760n has stopped installing windows updates, Error Code 0x80070020. Unable to find a fix for it.

Start with this: http://support.microsoft.com/mats/windows_update/en-us?entrypoint=lightbox
Then if that does not do it: http://support.microsoft.com/kb/883825/en-us
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Windows Backup Error code 0X8100002F

Same as everyone else with the exception that my skiped files are from my local network.
Backup skipped backing up \\Office-pc\c as it is not on local machine.
Backup skipped backing up \\Office-pc\c as it is not on local machine.
Backup skipped backing up \\Office-pc\e as it is not on local machine.
Backup skipped backing up \\Office-pc\f as it is not on local machine.
Backup skipped backing up \\Office-pc\g as it is not on local machine.
Backup skipped backing up \\OFFICE-PC\Users as it is not on local machine.
Backup skipped backing up \\Office-pc\j as it is not on local machine.
Backup skipped backing up \\Office-pc\i as it is not on local machine.
Backup skipped backing up \\Office-pc\h as it is not on local machine.
I have look everywhere for the setup file that the backup program uses to reset those drives without luck. So far I have tried , disconecting the laptop from the network, etc.
Any help?
OneCare tester

Hi,
Before going any further, I would like to verify did you map network drive on Windows 7? I want to inform you that Windows 7 does not support backup of network driver.
Please disconnect the mapped driver and perform back up again. And error code 0X8100002F, you can refer this KB:
http://support.microsoft.com/kb/979281
Also these links maybe helpful to you:
http://social.technet.microsoft.com/Forums/en-US/w7itprogeneral/thread/7931e5ec-d86d-4231-8b3e-7b64e2b1d820
http://social.technet.microsoft.com/Forums/en-US/w7itprogeneral/thread/6094ad61-8c08-4179-a948-18ea1e6b0f19
Hope it helps.
Regards,
Leo Huang
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Windows 7 Backup error code 0x81000039

Hi Everyone,
I was trying to perform a backup across our peer-peer network from a Windows 7 computer to an XP Pro computer. The user has full access to the additional harddrive on the XP computer, but I get error code 0x81000039, remote share path not available. I believe this was towards the end of the backup, but I was not watching it the full time. Any suggestions?

Hello Arthur,
I would suspect it is a network issue too, but I tried this a total of 5 times, 3 of them resulting in the network error. I do not remember what one of the errors was, but I know the other error was a “Only one image is allowed on this drive” type error. At this point I tried one last time and it was after restarting both computers, logging in, waiting till both systems were idle, and then creating a new folder on the remote drive so that there would be no more, "Only one image" errors. I had no problems creating the new folder, Jason7, on the remote drive. This is the same network drive that I use to backup this computer when it had Vista on it.
Unfortunately I am not physically located in the facilities so trying a crossover cable is a little more than difficult at this time. :)
Just out of curiosity I tried it on two computers running Windows 7 RC here at my house. I have the same network type setup and addressing as at the office. I was able to successfully complete a backup from my laptop to my home desktop, so that was no help in figuring out this problem.
It did actually put almost 19GB of zip files on the network backup location. This happened all three times when I got the network error. Also both computers have battery backup as well as the network switch, router, and modem so power kicking out would not have been the problem. None of the UPS’s recorded any spikes, noise or anything. It appears to be a problem at the end of the backup and whatever process it is doing near the end of the backup.
I was able to upload the last three tries log files to Soudamini yesterday and today he said he would be getting back with me.
Anything you can think of I can try remotely?
Best regards,
Frederick C. Frahm

Backup Error Code 0x80070002

New desktop, trying to do its first BU to an external usb connected drive that is 500GB and freshly formated (NTFS) on this system. BU fails after about 60% complete with error code 0x80070002. No further details, no mention of skipped or not found files, etc. Desktop has 6GB RAM and Nvidia GeForce 705 1GB graphics. BU works OK if saved to (6) DVD's.
Already tried the commonly reccomended solution of MS patch KB976972. When trying to install it reports "update not applicable" and doesn't complete. On another forum I saw an older entry about assigning a letter to a hidden partition that fixed this problem for lot of people. I am not sure what that is all about.
Is there a solution I can implement to fix this problem?
Thanks!
Ted

New info re:my backup problem. Moved external HDD to one of the USB 2.0 ports in the back of the system and everything worked OK. So its specifically the 3.0 USB ports.
If there is a resolution to this issue I would be interested in implementing it, the 2.0 ports are very slow but at least they work. If no solution, well, I can get a backup and an system image copy so I am good for now. I'll watch this post for a while to see if something comes up. If not I'll close out as resolved.
All the Best,
Ted

RMAN Backup error with Symantec Backup Tool

Hi
My Environment
OS Windows server 2003 R2
Oracle 10G R2 10.2.03 2 node RAC
When i am taking backup maually in the command prompt with RMAN, it is successful, but when we are trying from Symantec Backup tool we are getting errors like
RMAN 03002 failur of Backup lus archivelog is problem,
RMAN 10015 error compiling PL/SQL programme
RMAN 10033 error during compilation of job step2
Ora 00603 Oracle server session terminate by fatal error.
Ora 004030 out of process memory when trying to allocate 4120 bytes(pl/sql) MPCODE,BAMMA, BAM Buffer)
So please tell me why its giving the error with Symatntec and why when i am doing manually it is successfull.
What could be the solution, please we are taking daily and weekly backups with Symantec on HP tape library. Please suggest me to the needful.
Immediate reply highly apperciated
Thanks
Edited by: 873393 on Apr 17, 2012 10:09 AM

Hello,
Ora 00603 Oracle server session terminate by fatal error.
Ora 004030 out of process memory when trying to allocate 4120 bytes(pl/sql) MPCODE,BAMMA, BAM Buffer) The ORA-04030 error message is interesting. It means that the OS doesn't have enough memory for Oracle.
So you may monitore the Memory usage of the Server during the Symantec Backup, and check for any activity. May be the Symantec Backup runs when other Batch Jobs use already a lot of memory . You may also have to extend the RAM of the Server.
Also, check for the RMAN script used by Symantec and compare with the "manual" script. May be, some options are used with Symantec and consume more resources on the Server.
Hope this help.
Best regards,
Jean-Valentin

Windows Update Error Code 80072F8F! I Did All The Steps And Will Not Fix Please HELP?

No one seems they can not help me fix this error code I did many things and not one person has really
helped me, I have a question at another forum but all they do is just ask me questions tell me steps to fix this but nothing worked at all, This happened on 8/30/2014 and ever since no one can help me fix this at all....I have no money to pay for the fix...I
am on very very low limited disability income, No credit cards nothing. I need help now I paid a lot of money for my Windows 7 Ultimate and now since 8/30/2014 I got that error code no one has helped me....PLEASE help me please....And I am not sure where to
go for help here thank you. I have done many things but nothing is fixing this issue. please help...And yes I did the clock and clock keeps perfect time, doing that clock did not fix this error code at all...

Hi Angelsims,
First I also want to get more information from you to help us to troubleshhot:
1.Did this error occur on a single update or multiple updates? please also post the update name in issue.
2.Please also post the steps you have followed to fix this issue.
In addition, please try to use the general steps to troubleshoot the windows update issue, and refer to the steps below:
The following outlines how to stop services pertaining to Windows Update, rename system folders, register related DLL files, and then restart the previously mentioned services. This troubleshooting generally applies to all Windows Update related issues.
Stopping services pertaining to Windows Update
1.     Click Start, click All Programs, click Accessories, right-click Command Prompt, and select Run as Administrator.
2.     If you receive a notification from User Account Control simply click Continue.
3.     At the command prompt, type the following, commands and then press ENTER after each command.
        net stop wuauserv
        net stop bits
net stop cryptsvc
Please do not close the Command Prompt window.
Renaming folders pertaining to Windows Update
1.     At the command prompt, type the following commands, and then press Enter after each command:
2.     ren %systemroot%\System32\Catroot2 Catroot2.old
3.     ren %systemroot%\SoftwareDistribution SoftwareDistribution.old
4.     Please do not close the Command Prompt window.
Registering DLL’s pertaining to Windows Update
1.     Please copy and paste the following text into a new Notepad document, and save the file as WindowsUpdate.BAT
2.     If saved correctly the icon will change from a Notepad file to BAT file which has two blue cogs as its     icon.
   -or-
3.     You can manually type each command at the command prompt:
         regsvr32 c:\windows\system32\vbscript.dll /s
         regsvr32 c:\windows\system32\mshtml.dll /s
         regsvr32 c:\windows\system32\msjava.dll /s
         regsvr32 c:\windows\system32\jscript.dll /s
         regsvr32 c:\windows\system32\msxml.dll /s
         regsvr32 c:\windows\system32\actxprxy.dll /s
         regsvr32 c:\windows\system32\shdocvw.dll /s
         regsvr32 wuapi.dll /s
         regsvr32 wuaueng1.dll /s
         regsvr32 wuaueng.dll /s
        regsvr32 wucltui.dll /s
         regsvr32 wups2.dll /s
         regsvr32 wups.dll /s
         regsvr32 wuweb.dll /s
         regsvr32 Softpub.dll /s
        regsvr32 Mssip32.dll /s
         regsvr32 Initpki.dll /s
         regsvr32 softpub.dll /s
         regsvr32 wintrust.dll /s
         regsvr32 initpki.dll /s
        regsvr32 dssenh.dll /s
        regsvr32 rsaenh.dll /s
         regsvr32 gpkcsp.dll /s
         regsvr32 sccbase.dll /s
         regsvr32 slbcsp.dll /s
         regsvr32 cryptdlg.dll /s
         regsvr32 Urlmon.dll /s
         regsvr32 Shdocvw.dll /s
         regsvr32 Msjava.dll /s
         regsvr32 Actxprxy.dll /s
         regsvr32 Oleaut32.dll /s
        regsvr32 Mshtml.dll /s
         regsvr32 msxml.dll /s
         regsvr32 msxml2.dll /s
         regsvr32 msxml3.dll /s
         regsvr32 Browseui.dll /s
         regsvr32 shell32.dll /s
         regsvr32 wuapi.dll /s
         regsvr32 wuaueng.dll /s
         regsvr32 wuaueng1.dll /s
         regsvr32 wucltui.dll /s
         regsvr32 wups.dll /s
         regsvr32 wuweb.dll /s
         regsvr32 jscript.dll /s
         regsvr32 atl.dll /s
         regsvr32 Mssip32.dll /s
Restarting services pertaining to Windows Update
1.     Click Start, click All Programs, click Accessories, right-click Command Prompt, and select Run as Administrator.
2.     If you receive a notification from User Account Control simply click Continue.
3.     At the command prompt, type the following, commands and then
press ENTER after each command.
        net start wuauserv
        net start bits
        net start cryptsvc
   exit
Please try the steps above, if the step failed, please post the error or failure information.
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang

Windows 7 backup error code 0x81000019 (Backup Failure)

Similar Messages

Maybe you are looking for