Windows 7 backup fails with Error Code 0x80070002

I am trying to back up my computer to 32 GB USB flashdrive and I get the error 0x80070002; the system cannot find the file specified.
I've checked the event logs and I see the error: Event 14, volsnap "The shadow copies of volume C: were aborted because of an IO failure on volume C:."
I'm running Windows 7 Home Premium, Service Pack 1, 64x.

As it is a Windows 7 related question, it is recommended to post on Windows 7 forum instead of Windows Server forum:
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro
In the meantime a check disk is worth to have a try. Also try to run the backup in off-time to free the system resource.
If you have any feedback on our support, please send to [email protected]

Similar Messages

Windows 2008 backup failed with error code '2155348040'

Hello,
For the backup of our Windows 2008 servers, we use Windows Server backup. On one of the servers the backup will not run. In the application eventlog of the server there is the following message:
Log Name:      Application
Source:        Microsoft-Windows-Backup
Date:          2/16/2010 9:00:03 PM
Event ID:      546
Task Category: None
Level:         Error
Keywords:
User:          <user>
Computer:      <computer>
Description:
Backup attempted at '2/16/2010 8:00:03 PM' failed to start, error code '2155348040'.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Backup" Guid="{1db28f2e-8f80-4027-8c5a-a11f7f10f62d}" />
    <EventID>546</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2010-02-16T20:00:03.559Z" />
    <EventRecordID>33498</EventRecordID>
    <Correlation />
    <Execution ProcessID="4744" ThreadID="3516" />
    <Channel>Application</Channel>
    <Computer>...</Computer>
    <Security UserID="S-1-5-21-3054417077-3708097399-2792259940-500" />
</System>
<EventData>
    <Data Name="BackupTime">2010-02-16T20:00:03.559Z</Data>
    <Data Name="ErrorCode">2155348040</Data>
    <Data Name="ErrorMessage">%%2155348040</Data>
</EventData>
</Event>
Does anyone know how to solve this problem?
Best regards.
Wilfred van der Heijden

Hello Wilfred,
thank you for bringing your concerns to us.
  The error code 2155348040 indicates BLB_E_BACKUP_TARGET_SPACE_NOT_ENOUGH which happens if the target volume size is not
sufficient to create a backup. In your case the total used space of source volume(s) could be greater than the space on the target volume.
So please check the free and used space on the source volumes and retry the backup with the target volume space greater than that total
space. We recommend the target volume size to be 1.5 times of the total size of all the source volumes for scheduled backups so that you
  can have sufficient number of backup versions stored.
If you are using Block Level Backup then one other possiblity could be that your source volume is fragmented causing the backup size to be
more than expected. If that is the case then retry the backup after defragmenting the source volume.
Thanks,
Bikash Agrawala [MSFT]
--------------------------------------------------------------------------------- This posting is provided "AS IS" with no warranties, and confers no rights

Task sequence failed with error code 0x80070002

I am facing issue in OS deployment my machine PXE boot successfully but on the step of apply operating I got an error "task sequence failed with error code 0x80070002"
I see lot of thread describes to add Network Access Account I already added but still I receive same error please help
Usama Arif

i had this happen on two of my dp's the other day. It drove me nuts, I ended up removing the DP Role, removing the server from SCCM
I then deleted all files on the 'D :' drive
after everything was deleted, I re-added the Server to SCCM and gave it the DP Role back.
I then added the DP Back to the DP Group to receive all packages that was on it before. then finally once everything was re-uploaded my users were able to pxe boot again

Time Machine. Backup failed with error code: 21

Hi,
I recently upgraded to Leopard 10.5.4 mainly for the time machine backup. I'm using a DNS-323 in a RAID1 configuration as the TM backup drive. Also I have the DNS-323 connected to my Airport Extreme through the ethernet to give NAS ability to my home network.
After much hunting around the forums I got the sparsebundle created and copied to the DNS-323 share volume. See http://www.flokru.org/2008/02/29/time-machine-backups-on-network-shares-in-leopa rd/ My thanks to flokru.
However, TM is still not working. The console messages have the following:
Network mountpoint /Volume/Volume_1 not owned by backupd... remounting
Network volume mounted at /Volume/Volume11
Failed to mount disk image /Volume/Volume1_1/MacBook001b6334c307.sparebundle
Backup failed with error: 21
It would appear this error lies in the way TM is trying to mount the volume, specifically that Volume_1, the DNS-323 volume name, is not owned by TM. TM then tries to create a new volume, Volume11 and stick the sparebundle on it.
Is there a way of making TM "own" the volume, Volume_1?
Has anybody else seen this error or better yet, got a fix for it?

James,
It would appear this error lies in the way TM is trying to mount the volume, specifically that Volume_1, the DNS-323 volume name, is not owned by TM. TM then tries to create a new volume, Volume11 and stick the sparebundle on it.
Is there a way of making TM "own" the volume, Volume_1?
Actually, it is not TMs failure to mount the volume that is causing your failure to backup. I have received the same Console message using a Time Capsule. However, Time Machines' attempt to 'remount' the volume always succeeds and the backup goes through. That appears not to be your experience, but it is NOT because the volume is not being mounted. It is.
*Mount Point Conflict (TMDisk-1)*
NOTE: the following distinguishes “network drive” (the physical hard disk) from “disk image” (the sparsebundle file TM uses to backup to).
First of all, I am convinced that the second mount point that is created (in your case Volume11) is due to the fact that you already had the network drive mounted on your desktop at the time of the attempted backup. Was that the case?
When you manually mount a network drive the system creates a mount point in the /Volumes folder (Let’s call it TMDisk ). While that exists any attempt by Time Machine to mount the same disk will created a second mount point ( TMDisk-1 )
Nevertheless, as I have observed, this doesn't seem to prevent backups from taking place successfully, at least on the Time Capsule. And according to your Console logs it appears that your volume is being ‘remounted’ successfully.
*”The Backup Disk Image Could Not Be Mounted”*
The real issue is Time Machines' failure to mount the disk image (sparsebundle) contained on your network drive.
+Failed to mount disk image /Volume/Volume1_1/MacBook001b6334c307.sparebundle+
+Backup failed with error: 21+
More often than not this is due to having the Time Machine backup disk image (sparsebundle) mounted on your desktop during a backup attempt.
Eject the backup disk image (sparsebundle) by either clicking the little Eject icon to the right of the disk image in the Finders’ Sidebar, or Ctrl-Click the drive icon on the desktop and select “Eject” from the contextual menu. Now try backing up again or launching Time Machine to view previous backups.
For more information, see an article on this here:
[http://discussions.apple.com/thread.jspa?threadID=1715977]
Alternatively, a backup disk image can fail to mount if there is a problem with your computer name.
*Proper Computer Name* #
Make sure your computer has a proper name. Go to System Preferences --> Sharing. Time Machine needs to differentiate your computer from others on your network (i.e. "Bills MacBook" or "Office iMac"). If the "Computer Name" field is blank, create a name. Realize that if this step is necessary, you will likely have to start the Time Machine backup process over again and do another full initial backup.
According to THIS article [http://support.apple.com/kb/TS1760], Time Machine may experience problems if your computer name includes certain characters. Make sure the computer name only includes ASCII characters from the following set.
(0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ)
Once a change in the computer name occurs, you should stop and restart Sharing on the affected computer. Uncheck and then recheck Sharing in the Services list on the left.
Let me know if any of this helps.
Cheers!

Windows Update KB2926765 fails with error code 8024200D.

Note: it was recommended that I post this to TechNet. It was originally posted at http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/vista-update-bug/ed9baacd-edd3-449f-b679-8f71614f3a15?msgId=ca75efe9-beea-41e9-afda-7ffe15f9b0f3.
Windows Update KB2926765 keeps failing to install. The error code is 8024200D.
I've run sfc /scannow with no errors.
I used the System File Checker tool http://support.microsoft.com/kb/929833/en-us.
I ran the System Update Readiness tool. http://www.microsoft.com/en-us/download/confirmation.aspx?id=1540
The update still failed to install.
I've also run the MGADiag tool and the Microsoft FixIt windows update (wu) tool.
I then downloaded the update from the Microsoft Update Catalog http://catalog.update.microsoft.com/v7/site/Home.aspx
and copied it to the Windows\CheckSUR\packages folder (after creating the "packages" folder) , and ran the Readiness tool again.
The update failed to install.
I ran the readiness tool again. This time the readiness tool found no errors.
=================================
Checking System Update Readiness.
Binary Version 6.0.6002.23186
Package Version 24.0
2014-06-14 15:33
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 2169
No errors detected
Checking CoreOS key for repairing corruptions.
Winner version: 6.0.6002.18971.
Processor architecture: x86.
Check key to be repaired: wcm://Microsoft-Windows-CoreOS?version=6.0.6002.18971&language=neutral&processorArchitecture=x86&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers\metadata\elements\ComputerName
Recreated value: @_type.
Recreated value: @dataOnly.
Recreated value: @default.
Recreated value: @description.
Recreated value: @displayName.
Recreated value: @handler.
Recreated value: @legacyName.
Recreated value: @legacyType.
Recreated value: @migrate.
Recreated value: @scope.
Recreated value: @xsd:type.
=======================================
The update still fails to install.
I also recently ran the "automatic troubleshooter" MicrosoftFixit.wu.LB.236326420485116200.3.1.Run.exe and still have the problem.
We're using Windows Vista Business SP2 32 bit upgraded from XP. Antivirus - Bitdefender up to date. Previous antivirus - Avira Antivir and AVG. Firewall - Online Armor. The last successful update installation was Security Update for Office 2003 (KB2726929).
It and other updates have installed successfully (after the KB2926765 failure) and KB2926765 keeps failing.
Thanks.

Go through the following thread:
Windows Update Error Code 8024200D
You may create another user account with administrative privileges and recheck the issue.
S.Sengupta, Windows Entertainment and Connected Home MVP

Windows Update KB2467173 fails with Error code 1603

My windows update is failing over and over again with this message and it won't update C++ redistributable that a new program I started using requires.
The event log says as follows:
Product: Microsoft Visual C++ 2010 x86 Redistributable - 10.0.30319 - Update 'KB2467173' could not be installed. Error code 1603. Additional information is available in the log file C:\DOCUME~1\me\LOCALS~1\Temp\Microsoft Visual C++
2010 x86 Redistributable Setup_20150210_173547615-MSI_vc_red.msi.txt.
Thank you in Advance.

I would recommend that you start with recommendations shared here: http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/failure-to-install-windows-updates-error-code/934854af-0e1b-451e-889c-2fa869bab82f
If this does not help then you will need to examine the txt log file (The path is in the error message) to get more details.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Windows 10 Upgrade Failed with error code 80004005

OK, I have downloaded Windows 10 Upgrade and it all goes well until the computer restarts. Once it boots up again, the upgrade does not continue and I just go back to Windows 8.1. I then see error code # 80004005 for the upgrade in the Windows Update history. I do not know what is going on. I read on HP's Notebook upgrade page I found the following:For computers with available storage of 128 GB or less, the upgrade might require you to provide a USB hard drive (32 GB or larger). HP does not recommend using an SD card.If your computer has less than 128 GB of free hard drive space you will be prompted to connect a USB hard drive to continue with the installation. Use a blank USB hard drive 32 GB or larger. When the installation is complete, Windows 10 Upgrade will copy the windows.old file to the USB hard drive. Keep this file on the USB hard drive. It will be required to Go Back to the previous operating system if necessary.My computer definately fits in that criteria since it is equiped with a 128GB SSD. When I start the upgrade, I do not get prompted for an external hard drive. I have also tried the Media Creation Tool and ISO/USB and get the "Windows 10 Installation has Failed" error.

The system reserved partition serves a purpose. If it is deleted, then the OS will not boot back up. In which case you are toast.ON THIS PAGE, it tells what the partition is used for.-The Boot Manager and Boot Configuration Data : When your computer boots, the Windows Boot Manager starts up and reads the boot data from the Boot Configuration Data (BCD) Store. Your computer boots the boot loader off the System Reserved partition, and it boots Windows from your system drive. I advise that you not do what CanhThanh is instructing

Windows Update / WSUS failing with Error Code 80070005

I have a small network (~40 systems) that I use WSUS to keep up to date. Because of errors I was getting, I elected to rebuild my WSUS server, which is running Windows
2012R2 and WSUS is the only thing running on that server. However, now none of my clients can receive updates from the WSUS server even though they will connect to the Microsoft Update site and download/install without a problem. Any time I try
to install updates from the WSUS server, Windows Update says that it needs to “Install new Windows Update software”. When I click the “Install now” button, it closes and reopens the window and then report error code 80070005, which I know is an access
denied. The WindowsUpdate.log also reports the same error code and also indicates a reboot is required, even after I reboot the client. I’ve run Process Monitor and am not able to see where the access denied is even coming from. WindowsUpdate.log
file information available upon request. Any help would be appreciated.

Because of errors I was getting, I elected to rebuild my WSUS server
I suggest we start back at this point.
What errors were you getting, and what exactly did you do to "rebuild" your WSUS server?
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Secondary DPM backup failure with error code 0x80070002

Hello everyone,
I have the following scenario:
Protected Server -> Primary DPM (DPM 2012 R2 UR4) -> Secondary DPM (DPM 2012 R2 UR4 - remote network)
I have created a Protection Group in Primary DPM server containing three folders under C: drive. Backups works fine.
In my Secondary DPM server, I have created a Protection Group containing my Primary DPM server's protected data, which is the entire drive C:.
I am getting the following error while running a Consistency Check on Secondary DPM server:
An unexpected error occurred while the job was running. (ID 104 Details: The system cannot find the file specified (0x80070002))
In the logs, I just see entries like this:
1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070003] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\Microsoft SQL Server\MSSQL10_50.DPM2012R2\MSSQL\DATA\
1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070003] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\Microsoft SQL Server\MSSQL10_50.DPM2012R2\MSSQL\
1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070003] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\Microsoft SQL Server\MSSQL10_50.DPM2012R2\
1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070003] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\Microsoft SQL Server\
1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070002] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\
In the DPM console, this data source status icon shows green, however no Recovery Point is created.
Do you guys have any idea on why this is happening?
Thanks for your cooperation.
Best regards,
Bruno Martins

Does Volume C:\ on your primary server involves boot configuration data which is offline?
This can happen due to installation of some 3rd party disk storage management solutions.
The following blog has some details on how to solve file not specified errors:
http://blogs.technet.com/b/askcore/archive/2010/06/18/reasons-why-the-error-enumeration-of-the-files-failed-may-occur-during-system-state-backup.aspx
Regards, Trinadh [MSFT] This posting is provided AS IS with no warranties, and confers no rights. If you found the reply helpful, please MARK IT AS ANSWER. Looking for source of information for DPM? http://blogs.technet.com/b/dpm/ http://technet.microsoft.com/en-in/library/hh758173.aspx

DAG - Backup failing on 1 DB only with error - The Microsoft Exchange Replication service VSS Writer instance ID failed with error code 80070020 when preparing for a backup of database 'DB012'

Hi Board,
i´ve search across the board, technet and symantec sites but did not found a hint about my problem.
we drive a 2 node DAG (Location1-Ex1-mb1
Location2-exc1-mb1), on SP2 RU4 patchlevel with 40 Databases.
Since some time the backup of one - and only one DB - is failing with these events, logged on the Mailboxserver on which the passive DB is hosted.
Log Name:      Application
Source:        MSExchangeRepl
Date:          28.09.2012 00:37:17
Event ID:      2112
Task Category: Exchange VSS Writer
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Location1-Exc1-MB1
Description: The Microsoft Exchange Replication service VSS Writer instance 1ab7d204-609a-4aea-b0a7-70afb0db38de failed with error code 80070020 when preparing for a backup of database 'DB012'.
Followed by
Log Name:      Application
Source:        MSExchangeRepl
Date:
01.10.2012 03:33:06
Event ID:      2024
Task Category: Exchange VSS Writer
Level:         Error
Keywords:      Classic
User:
N/A
Computer:      Location1-Exc1-MB1
Description:
The Microsoft Exchange Replication service VSS Writer (Instance 42916d80-36c1-4f73-86d0-596d30226349) failed with error 80070020 when preparing for a backup.
The backup Application - Symantec Backup Exec 2010 R3 – states, this error
Snapshot provider error (0xE000FED1): A failure occurred querying the Writer status.
Check the Windows Event Viewer for details.
Writer Name: Exchange Server, Writer ID: {76FE1AC4-15F7-4BCD-987E-8E1ACB462FB7}, Last error: The VSS Writer failed, but the operation can be retried (0x800423f3), State: Stable (1).
Symatec suggests within http://www.symantec.com/business/support/index?page=content&id=TECH184095
to restart the MS Exchange Replication Service – BUT the mentioned eventID
8229 isn´t present on any of the both Mailboxservers.
The affected Database is active on Location2-Exc1-Mb1 Server and in an overall healthy state. I found during my research, that below Location2-Exc1-Mb1 Server, there are not removed shadow copies present!
This confuses me, since all Backups are normally taken from the passive copy of a Database.
So my questions to the board are:
* Does anyone is facing similar issues?
* Can someone explain why snapshots are present on the Mailboxserver hosting the Active Database, whilst the errors are logged on the passive one?
-          * Does someone know the conditions, why shadows copies remain and
aren´t removed in a proper manner?
What can cause the circumstance, that only 1 DB is facing such issues?
Any suggestion is welcome!
BR
Markus

Hi Lenora,
I´ve encreases VSS / Exchange Backup Log levels to expert, before starting
those things i´ve all tried now:
- Backup from passive DB (forced within Symantec Backup Exec)
- Backup from active DB (forced within Symantec Backup Exec)
- Backup from passive DB without GRT enabled (forced within Symantec Backup Exec)
- Backup from active DB without GRT enabled(forced within Symantec Backup Exec)
All those attempts failed.
But brought some more details - the backup against the active DB states, that there is still a backup in progress and therefore this backup is cancelled by VSS.
The Solution was, that i´ve needed to restart the Exchange Replication Service on the Mailbox Server hosting the passive DB.
Backups are working again on all DBs!
THX for your replys.
Best regards
Markus

CcmSetup failed with error code 0x80004005 - windows 8.1

using sccm 2012 r2, trying to push to a windows 8.1 client i get:
<![LOG[==========[ ccmsetup started in process 7416 ]==========]LOG]!><time="16:05:28.041+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="ccmsetup.cpp:9437">
<![LOG[Running on platform X64]LOG]!><time="16:05:28.042+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="util.cpp:1837">
<![LOG[Updated security on object C:\WINDOWS\ccmsetup\cache\.]LOG]!><time="16:05:28.042+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9272" file="ccmsetup.cpp:9281">
<![LOG[Launch from folder C:\WINDOWS\ccmsetup\]LOG]!><time="16:05:28.042+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="ccmsetup.cpp:721">
<![LOG[CcmSetup version: 5.0.7958.1000]LOG]!><time="16:05:28.042+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="ccmsetup.cpp:727">
<![LOG[In ServiceMain]LOG]!><time="16:05:28.044+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9468" file="ccmsetup.cpp:3365">
<![LOG[Running on 'Microsoft Windows 8.1 Pro' (6.3.9600). Service Pack (0.0). SuiteMask = 272. Product Type = 18]LOG]!><time="16:05:28.084+00" date="01-15-2014" component="ccmsetup" context="" type="1"
thread="9468" file="util.cpp:1919">
<![LOG[Ccmsetup command line: "C:\WINDOWS\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="16:05:28.084+00" date="01-15-2014" component="ccmsetup" context="" type="1"
thread="9468" file="ccmsetup.cpp:3590">
<![LOG[Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required.]LOG]!><time="16:05:28.084+00" date="01-15-2014" component="ccmsetup" context=""
type="1" thread="9468" file="ccmsetup.cpp:3775">
<![LOG[Command line: "C:\WINDOWS\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="16:05:28.084+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468"
file="ccmsetup.cpp:3776">
<![LOG[SslState value: 224]LOG]!><time="16:05:28.085+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9468" file="ccmsetup.cpp:4425">
<![LOG[CCMHTTPPORT:    80]LOG]!><time="16:05:28.086+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8617">
<![LOG[CCMHTTPSPORT:    443]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8632">
<![LOG[CCMHTTPSSTATE:    224]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8650">
<![LOG[CCMHTTPSCERTNAME:    ]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8668">
<![LOG[FSP:    ]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8720">
<![LOG[CCMFIRSTCERT:    1]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8778">
<![LOG[Config file:      C:\WINDOWS\ccmsetup\MobileClientUnicode.tcf]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468"
file="ccmsetup.cpp:4539">
<![LOG[Retry time:       10 minute(s)]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:4540">
<![LOG[MSI log file:     C:\WINDOWS\ccmsetup\Logs\client.msi.log]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468"
file="ccmsetup.cpp:4541">
<![LOG[MSI properties:    INSTALL="ALL" SMSSITECODE="consto" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="224" CCMFIRSTCERT="1"]LOG]!><time="16:05:28.088+00"
date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:4542">
<![LOG[Source List:]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:4550">
<![LOG[                  \\TA-SRV-SC.constoplc.local\SMSClient]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup"
context="" type="1" thread="9468" file="ccmsetup.cpp:4557">
<![LOG[                  \\TA-SRV-SC.constoPLC.LOCAL\SMSClient]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup"
context="" type="1" thread="9468" file="ccmsetup.cpp:4566">
<![LOG[MPs:]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:4569">
<![LOG[                  TA-SRV-SC.constoplc.local]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context=""
type="1" thread="9468" file="ccmsetup.cpp:4584">
<![LOG[MapNLMCostDataToCCMCost() returning Cost 0x1]LOG]!><time="16:05:28.091+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmutillib.cpp:5479">
<![LOG[No version of the client is currently detected.]LOG]!><time="16:05:28.093+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:2748">
<![LOG[Folder 'Microsoft\Configuration Manager' not found. Task does not exist.]LOG]!><time="16:05:28.094+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9468" file="wintask.cpp:622">
<![LOG[Updated security on object C:\WINDOWS\ccmsetup\.]LOG]!><time="16:05:28.095+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9468" file="ccmsetup.cpp:9281">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='100' will not be sent.]LOG]!><time="16:05:28.095+00" date="01-15-2014" component="ccmsetup" context="" type="1"
thread="9468" file="ccmsetup.cpp:9763">
<![LOG[Running as user "SYSTEM"]LOG]!><time="16:05:28.118+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:1995">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='328' will not be sent.]LOG]!><time="16:05:28.118+00" date="01-15-2014" component="ccmsetup" context="" type="1"
thread="9468" file="ccmsetup.cpp:9763">
<![LOG[CcmSetup failed with error code 0x80004005]LOG]!><time="16:05:28.119+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="ccmsetup.cpp:10879">
any ideas why its failing?

Hi,
I've seen the same error on a customer where we had Windows Intune Client (SCCM) installed previously. Did you try it on a newly deployed computer? If you had Intune or another CCM client on it previously make sure you clean it up. Here is a well formulated
instruction:
http://douwevanderuit.wordpress.com/2014/01/30/removing-windows-intune-client/
Usually when deploying to many clients we use a startup script, there is a great one that Jason Sandys made in the link below.
http://blog.configmgrftw.com/configmgr-client-startup-script/
There should be no problems deploying SCCM 2012 R2 clients on Windows 8.1 unless there is something wrong with either the setup or the client computer.
All the best, Jesper Hassing - MCTS SCCM 2012 - MCSA 2012 Server - MCP

Windows Server 2008 R2 Service Pack 1 installation failed with error code 0x800f0a12

Hello,
I'm facing problem to install windows server 2008 R2 SP1. I cannot install SP1. In this server have running Exchange 2010 server. to update Win2008 R2 SP1 facing the following error:
1. Service Pack installation failed with error code 0x800f0a12.
2. Installation Failure: Windows failed to install the following update with error 0x80070643: Windows Server 2008 R2 Service Pack 1 for x64-based Systems (KB976932).
Please suggest

Please run the system update readiness tool.
http://windows.microsoft.com/en-us/windows7/What-is-the-System-Update-Readiness-Tool?SignedIn=1
Then post the complete contents of;
%SYSTEMROOT%\Logs\CBS\CheckSUR.log
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

EvtFormatMessage function fails with error code 15033 (ERROR_EVT_MESSAGE_LOCALE_NOT_FOUND) on non-English Windows OS

I have an App which subscribes to Windows events and if it is matching the filter criteria, it reports it.
I have observed a strange problem on non-English windows 2008 OS.
If the Windows event is of source = EventLog (e.g. Event ID 1102: Security log was cleared), then EvtFormatMessage fails with error code 15033. But if the event is of any other source (e.g. Microsoft Security Auditing), then it works absolutely fine.
While calling EvtOpenPublisherMetadata, I have created locale ID as MAKELCID(MAKELANGID(0x09,0x01) i.e. Primary language = LANG_ENGLISH and Sub Language = SUBLANG_DEFAULT.
I want events details in English only and hence primary language is put as English. If I change this macro to have primary language as LANG_CHINESE and sub language as SUBLANG_CHINESE_SIMPLIFIED, then it works fine but gives back event details in native
OS language (Chinese in this case). That's not a desirable output for me.
Following is the way I'm calling EvtFormatMessage
EvtFormatMessage(hMetaData, hEvent[0], -1, 0, NULL,
1 /* EvtFormatMessageEvent */,
m_pTextBufferSize/sizeof(WCHAR),
m_pTextBuffer, &dwBuffUsed);
A work-around for this is to install a MUI pack for English language. If the MUI pack is installed then it works fine. But I cannot enforce users to have this pack installed on all their systems.
My question is why this API is working for some set of Events whereas failing for some specific Events? Am I doing something wrong?
Any help would be appreciated.
TIA,
Regards,
Yogesh

Was on vacation and hence the delay in replying.
As mentioned earlier, while calling EvtOpenPublisherMetadata, I have created locale ID as MAKELCID(MAKELANGID(0x09,0x01)
i.e. Primary language = LANG_ENGLISH and Sub Language = SUBLANG_DEFAULT. If I change this macro
to have primary language as LANG_CHINESE and sub language as SUBLANG_CHINESE_SIMPLIFIED, then it works fine but gives back event details in native OS language (Chinese in this case).
This is not an option for me as I want event details in English language only.
Regards,
Yogesh
Regards, Yogesh

SCCM 2012 CU2 OSD forest trust: ReleaseRequest failed with error code 0x87d00317

Hello,
Actually i have a difficult Problem with my SCCM 2012 R2 CU2 Windows 7 x64 SP1 Tasksequence:
I get the folowing error in smsts.log:
::RegQueryValueExW(hSubKey, szReg, NULL, NULL, NULL, &dwSize), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\utils.cpp,811) TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
RegQueryValueExW is unsuccessful for Software\Microsoft\SMS\Task Sequence, SMSTSEndProgram TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
GetTsRegValue() is unsuccessful. 0x80070002. TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
End program: TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Finalize logging request ignored from process 1736 TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Waiting for CcmExec service to be fully operational TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
CcmExec service is up and fully operational TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Access handle will be read from _SMSTSActiveRequestHandle TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Access handle: {B699D570-B2BF-4874-8CB7-3B208B380969} TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Attempting to release request using {B699D570-B2BF-4874-8CB7-3B208B380969} TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
CoCreateInstance succeeded TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
pISoftwareExecutionRequestMgr->ReleaseRequest(ActiveRequestGUID), HRESULT=87d00317 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanagerutils.cpp,136) TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
ReleaseRequest failed with error code 0x87d00317 TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Task Sequence Manager could not release active TS request. code 87D00317 TSManager 9/5/2014 1:20:35 PM 1740 (0x06CC)
Here is the complete smsts.log: http://1drv.ms/1pwTEBf
To explain the Problem in Detail:
The SCCM Primary Site Server and the Clients are in different trusted (bidirectional) forests!
Everythings working fine in this Scenario, I can install SCCM Agent on the Clients with Manual ccmsetup and with Client Push Installation. Additionally i can deploy Software Updates and so on... only OSD is crashing in the releaserequest step.
During my Tasksequence new Clients are joined to Domain A while SCCM Primary Site Server is installed in Domain B
If I change my TS and let the Clients also join Domain B everything works without any Problems and the Tasksequence finish without any Errors.
My Problem must be related to the different Domains and the forest trust.
My Setup:
MP published to DNS in both domains
Schema Extended in both domains
System Management Container published and verified in both domains
ccmsetup Parameters in TS: ccmsetup SMSMP=sccm.domain.b FSP=sccm.domain.b DNSSUFFIX=Domain.b
Network Access account configured with Domain B account
Domain Join account has create Computer rights on the OU in Domain A (Domain join is successful)
DNs conditional forwarders configured in both Domains and DNS resolutin is working in both directions
Any suggestions?
Many thanks.
regards,
Christian

Hi Christian,
So do you actual get an error message in your TS or is it just failing to join Domain B? (Could be both if the machines fails to join the domain).
Can you review netsetup.log on the machines after the issue and see what error message you might be getting during the domain join process?
Also, if it a domain join issue, can you try manually joining to domain B using the same service account?

Client push error CcmSetup failed with error code 0x8007064c

Installing file 'C:\WINDOWS\ccmsetup\Silverlight.exe' with options '/q'.
File 'C:\WINDOWS\ccmsetup\Silverlight.exe' returned failure exit code 1612. Fail the installation.
InstallFromManifest failed 0x8007064c
ITaskScheduler::Delete failed to delete task Configuration Manager Client Retry Task (0x80070002).
CcmSetup failed with error code 0x8007064c
This error i faced while Upgrading client on Windows Server 2003 ,that i upgraded my SCCM 2012 SP1 to SCCM2012 R2
i tried to uninstall the client and done successfully , while pushing the client again I've the same Error code.
i searched and found SMS 2003 toolkit 2 fixed the problem for some people but i did not .

<![LOG[==========[ ccmsetup started in process 8108 ]==========]LOG]!><time="15:37:25.641-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:9437">
<![LOG[Running on platform X86]LOG]!><time="15:37:25.641-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="util.cpp:1837">
<![LOG[Updated security on object C:\WINDOWS\ccmsetup\cache\.]LOG]!><time="15:37:25.641-180" date="08-05-2014" component="ccmsetup" context="" type="0" thread="5432" file="ccmsetup.cpp:9281">
<![LOG[Launch from folder C:\Setup\Client\]LOG]!><time="15:37:25.641-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:721">
<![LOG[CcmSetup version: 5.0.7958.1000]LOG]!><time="15:37:25.641-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:727">
<![LOG[Running on 'Microsoft(R) Windows(R) Server 2003, Standard Edition' (5.2.3790). Service Pack (2.0). SuiteMask = 272. Product Type = 18]LOG]!><time="15:37:25.876-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="util.cpp:1919">
<![LOG[Ccmsetup command line: C:\Setup\Client\ccmsetup.exe SMSSLP=ldcsccm1v.linkdc.local SMSSITECODE=ldc DNSSUFFIX=linkdc.local]LOG]!><time="15:37:25.876-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:3590">
<![LOG[Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required.]LOG]!><time="15:37:25.876-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:3775">
<![LOG[Command line: C:\Setup\Client\ccmsetup.exe SMSSLP=ldcsccm1v.linkdc.local SMSSITECODE=ldc DNSSUFFIX=linkdc.local]LOG]!><time="15:37:25.876-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:3776">
<![LOG[SslState value: 224]LOG]!><time="15:37:25.876-180" date="08-05-2014" component="ccmsetup" context="" type="0" thread="5432" file="ccmsetup.cpp:4425">
<![LOG[No version of the client is currently detected.]LOG]!><time="15:37:25.907-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:2748">
<![LOG[Updated security on object C:\WINDOWS\ccmsetup\.]LOG]!><time="15:37:25.938-180" date="08-05-2014" component="ccmsetup" context="" type="0" thread="5432" file="ccmsetup.cpp:9281">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='100' will not be sent.]LOG]!><time="15:37:25.938-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:9763">

Windows 7 backup fails with Error Code 0x80070002

Similar Messages

Maybe you are looking for