Windows 7 Backup is Failing with error 0x81000101

Hello,
My windows 7 backup is failing with the following message "Error Code: 0x81000101". I searched the internet but didn't find any good solution.
Can you please tell me what should I do?

If none of the above worked read this next
Did your computer come with a Recovery Partition on the drive? (Check the computers documentation)
If it did, you cannot have any backup software or System Restore set to backup or monitor that drive.
Go to Control Panel.
Click on Classic View in the Task Pane.
Double click System.
Select Advanced System Settings in the Tasks Pane.
Click the System Protection Tab.
In the Available Disks section, make sure that the backup partition is not selected. If it is, remove the check mark.
After this is done or if this does not work, go to Start/All Programs/Accessories/System Tools and click on Disk Cleanup.
In the Options dialog, select 'Files from all users on this computer'. Click the C: system drive. When the scan is completed, click the 'More Options' Tab. In the 'System Restore and Shadow Copies' section, click the 'Cleanup' button. In the 'Are you sure......' popup, click Delete. Click OK.
Wait for the Disk Cleanup to complete.
Now, go back into Disk Cleanup and follow the same procedure for any other drives that appear in the drop down menu where you selected the C: drive the first time.
Exit everything and reboot the computer.
After the computer reboots, check System Restore again. If System Restore is still not working, go back into System Protection and turn off System Restore for all drives and reboot the computer again. This will delete all restore points on all drives.
After the reboot, go back and enable System Restore for the C: volume only. Create a new restore point for that drive.
Let me know the results.
MCSE, MCSA, MCDST
[If this post helps to resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others find the answer faster.]

Similar Messages

Windows.Launch contract failed with error: The app didn't start..

We have installed windows 8 Prof X64 Edition; none of the Metro apps are not getting launched; the system is added in domain, the event viewer has the below information for one of the app.
Event Under: Applications
App microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Chat did not launch within its allotted time.
Event Under: AppHost
The App Host has encountered an unexpected error and will terminate. The error is 0x8007000E.
Event Under: Microsoft-Windows-TWinUI/Operational
Activation of the app microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Chat for the Windows.Launch contract failed with error: The app didn't start..
Regards Ajinkya Ghare MCITP-Server Administrator | MCTS

Hi,
Try to put a machine disjoin the domain to see if the same issue occurs.
Sometimes the Windows 8 machines cannot use metro app once join the domain, you can try this method:
1- Open "Local Group Policy Editor"
2-Navigate to "Computer Configuration - Administrative Templates - Network Isolation"
3- Open "Internet Proxy Servers for Metro Style Apps" and set the value to your proxy server address like 172.16.0.1:8080.
Regards,
Leo
Huang
Leo Huang
TechNet Community Support

Backup job failing with error ORA-12546: TNS:permission denied

Hi All
This is regarding one backup job running on windows server 2003 failing with below error.. when we are running this job manually that is running fine.. but not running from windows scheduler.
its 9.2.0.1 and the 32 bit... windows 2003 64 bit
Recovery Manager: Release 9.2.0.1.0 - Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-12546: TNS:permission denied
Please help.
Edited by: 811427 on Sep 6, 2011 12:36 AM

I assume you installed Oracle as "Administrator" user. If so, make sure you are running the job from the same user. Optionally open "services.msc" and go to the "ORCL Service" or whatever it may and check "Log on" tab. It should be "logon as" value should be "Local system". If you are using a domain then give credentials accordingly. Make sure you are part of "DBA" group.
The ORA-12546 TNS:permission denied points to "Insufficient permissions to trace/log files" - check the trace/log destination is writable and requisite permissions are given.

Windows 7 update fails with error 8000FFFF

I've got a Windows 7 x64 installation that I've had for around three months. Everything has been fine and working up until a few weeks ago. When I run Windows Update it finds updates and allows me to select them, but when I run the install it fails with error 8000FFFF. Update used to work, but then suddenly quit.
I've dug through tons of forum and web sites regarding this specific error, but they all of their solutions do nothing to fix my problem. In frustration I decided to put in a spare hard drive and install Windows 7 from scratch. I did that and the first thing I tried to do after logging in was updates and it failed for the same reason (8000FFF).
I have the same situation with a Windows Storage Server 2008 x64 that I have as well. It has been runing for about six months or more and updates were working fine. Then update started failing for the same or some other reason about the same time. On this machine I can start the update and see it report a percentage downloading the update. It gets to about 5 or 6 percent and then fails.
Is there some possible networking issue at play in my situation? I have earlier Windows versions (XP, XP64, Svr 2003 and Svr 2003 R2) and updates work fine on those. I know those are using a different mechanism, but I do not notice any other kind of networking issues from my house to the Internet. I have not changed anything or any settings in my firewall at all. Is there some specific protocol, port or something that has to work prefectly in order for the new Windows update to work?
All of my machines are pretty much Intel based. Win7 box is a Core2Duo on an EVGA 680i motherboard. The servers are Intel Xeons with Intel motherboards, chipsets and nics.
Thanks for any advice and help

Wow, suddenly I have the same bizarre error at 11% of downloading, then error #8000FFFF.
Fix IT, registry keys and SoftwareDistribution folder cleaning, uninstalling previous updates, manual downloading of appropriate updates and attempt do install it and creating/deleting user profiles - don't work at all.
Any new ideas?
Thanks,
Win7 x64 SP1
Package KB2633873 failed to be changed to the Installed state.
Status: 0x8e5e0408.Windows update "Security Update for Windows (KB2633873)" could not be installed because of error 2388526088 "" (Command line: ""C:\Windows\system32\wusa.exe" "C:\Users\Wiewior\Downloads\Windows6.1-KB2633873-x64.msu"
Package KB2645640 failed to be changed to the Installed state. Status: 0x8e5e0408.
Windows update "Security Update for Windows (KB2645640)" could not be installed because of error 2388526088 "" (Command line: ""C:\Windows\system32\wusa.exe" "C:\Users\Wiewior\Downloads\Windows6.1-KB2645640-x64.msu"

Windows update KB3000850 fails with error: 0x800700a1

Windows update KB3000850 fails with the following error: 0x800700a1
In WindowsUpdate.log there is the following:
FATAL: CBS called Error with 0x800700a1
In CBS.log there is the following error:
2014-11-25 11:17:54, Error                 CSI    00000ea8 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #11395486# from Windows::Rtl::SystemImplementation::DirectFileSystemProvider::SysCreateFile(flags = 0, handle = {provider=NULL, handle=0, name= ("null")}, da = (SYNCHRONIZE|FILE_WRITE_ATTRIBUTES), oa = @0xa81c89d2f0->OBJECT_ATTRIBUTES {s:48; rd:NULL; on:[9]"MSDTC.LOG"; a:(OBJ_CASE_INSENSITIVE)}, iosb = @0xa81c89d398, as = (null), fa = (FILE_ATTRIBUTE_NORMAL), sa = (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE), cd = FILE_OPEN, co = (FILE_NON_DIRECTORY_FILE|FILE_SYNCHRONOUS_IO_NONALERT|0x00004000), eab = NULL, eal = 0, disp = Invalid)[gle=0xd000003b]2014-11-25 11:17:54, Error                 CSI    00000ea9@2014/11/25:11:17:54.259 (F) base\wcp\sil\merged\ntu\ntsystem.cpp(2155): Error STATUS_OBJECT_PATH_SYNTAX_BAD originated in function Windows::Rtl::SystemImplementation::DirectFileSystemProvider::SysCreateFile expression: (null)[gle=0x80004005]

Tried all the suggestions in that thread, including running the DSIM tool.
Still getting the same error: 800700a1
I've uploaded the complete logs here: https://mega.co.nz/#F!wpZCHQRB!1GI7_PRJ3_S2nwITYVxDsg
This is a bigger snip from CBS.log around the errors:
2014-11-26 16:28:39, Info                  CSI    00000458 'From' Namespace [wcm://Microsoft-Windows-IPMIProvider?version=6.3.9600.16384&language=neutral&processorArchitecture=x86&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers] not found, servicing aborted, reverting to Install of 'To'
2014-11-26 16:28:39, Info                  CSI    00000459 Processing Namespace [wcm://Microsoft-Windows-IPMIProvider?version=6.3.9600.17415&language=neutral&processorArchitecture=x86&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers]
2014-11-26 16:28:39, Info                  CSI    0000045a done
2014-11-26 16:28:39, Info                  CSI    00000e98 Regenerating payload files from delta files on component: [ml:280{140},l:186{93}]"amd64_microsoft-windows-com-dtc-runtime_31bf3856ad364e35_6.3.9600.16384_none_0a1162f033fa01f6"
2014-11-26 16:28:39, Info                  CSI    00000e99 Creating NT transaction (seq 2), objectname [6]"(null)"
2014-11-26 16:28:39, Info                  CSI    00000e9a Created NT transaction (seq 2) result 0x00000000, handle @0xf7c
2014-11-26 16:28:39, Error                 CSI    00000e9b (F) STATUS_OBJECT_PATH_SYNTAX_BAD #8867646# from Windows::Rtl::SystemImplementation::DirectFileSystemProvider::SysCreateFile(flags = 0, handle = {provider=NULL, handle=0, name= ("null")}, da = (SYNCHRONIZE|FILE_WRITE_ATTRIBUTES), oa = @0xa2a758d410->OBJECT_ATTRIBUTES {s:48; rd:NULL; on:[9]"MSDTC.LOG"; a:(OBJ_CASE_INSENSITIVE)}, iosb = @0xa2a758d4b8, as = (null), fa = (FILE_ATTRIBUTE_NORMAL), sa = (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE), cd = FILE_OPEN, co = (FILE_NON_DIRECTORY_FILE|FILE_SYNCHRONOUS_IO_NONALERT|0x00004000), eab = NULL, eal = 0, disp = Invalid)
[gle=0xd000003b]
2014-11-26 16:28:39, Error                 CSI    00000e9c@2014/11/26:16:28:39.304 (F) base\wcp\sil\merged\ntu\ntsystem.cpp(2155): Error STATUS_OBJECT_PATH_SYNTAX_BAD originated in function Windows::Rtl::SystemImplementation::DirectFileSystemProvider::SysCreateFile expression: (null)
[gle=0x80004005]
2014-11-26 16:28:39, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CBS.log to WER report.
2014-11-26 16:28:39, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20141126162432.log to WER report.
2014-11-26 16:28:39, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20141120100026.cab to WER report.
2014-11-26 16:28:39, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20141028123021.cab to WER report.
2014-11-26 16:28:39, Info                  CBS    Not able to add pending.xml to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-11-26 16:28:39, Info                  CBS    Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-11-26 16:28:39, Info                  CBS    Not able to add SCM.EVM to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-11-26 16:28:39, Error                 CSI    00000e9d (F) STATUS_OBJECT_PATH_SYNTAX_BAD #8867645# from Windows::Rtl::SystemImplementation::CSystemIsolationLayer_IRtlSystemIsolationLayerTearoff::TransferFile(flags = (ReplaceIfExists|OpenForBackupIntent), op = [8]"HardLink", odir = NULL, oname = [l:18{9}]"MSDTC.LOG", ndir = @0xa29be2af38, nname = [l:18{9}]"MSDTC.LOG", disp = (null))
[gle=0xd000003b]
2014-11-26 16:28:39, Error                 CSI    00000e9e (F) STATUS_OBJECT_PATH_SYNTAX_BAD #8867523# from CFileInstaller::DoComponentOperation(...)[gle=0xd000003b]
2014-11-26 16:28:39, Error                 CSI    00000e9f (F) STATUS_OBJECT_PATH_SYNTAX_BAD #8867522# from CFileInstaller::ProcessComponentChange(...)[gle=0xd000003b]
2014-11-26 16:28:39, Error                 CSI    00000ea0 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #8867521# from PrimitiveInstaller::CCoordinator::ProcessChange(Change 6.3.9600.16384 -> 6.3.9600.17415 for Microsoft-Windows-COM-DTC-Runtime, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral)[gle=0xd000003b]
2014-11-26 16:28:39, Info                  CSI    0000045b SMI Primitive Installer [done]
2014-11-26 16:28:40, Error                 CSI    00000ea1 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #4347192# from CCSDirectTransaction::PerformChangeAnalysis(...)[gle=0xd000003b]
2014-11-26 16:28:40, Error                 CSI    00000ea2 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #4347191# from CCSDirectTransaction::PrepareForCommit(...)[gle=0xd000003b]
2014-11-26 16:28:40, Error                 CSI    00000ea3 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #4347190# from CCSDirectTransaction::ExamineTransaction(...)[gle=0xd000003b]
2014-11-26 16:28:40, Error                 CSI    00000ea4 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #4347189# from CCSDirectTransaction_IRtlTransaction::ExamineTransaction(...)[gle=0xd000003b]
2014-11-26 16:28:40, Info                  CSI    0000045c SMI Primitive Installer [started]
2014-11-26 16:28:40, Info                  CSI    0000045d 'From' Namespace [wcm://Microsoft-Windows-Installer-Engine?version=6.3.9600.17399&language=neutral&processorArchitecture=wow64&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers] not found, servicing aborted, reverting to Install of 'To'
2014-11-26 16:28:40, Info                  CSI    0000045e Processing Namespace [wcm://Microsoft-Windows-Installer-Engine?version=6.3.9600.17415&language=neutral&processorArchitecture=wow64&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers]
2014-11-26 16:28:40, Info                  CSI    0000045f done
2014-11-26 16:28:40, Info                  CSI    00000460 'From' Namespace [wcm://Microsoft.Windows.WinHTTP?version=5.1.9600.16384&language=neutral&processorArchitecture=wow64&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers] not found, servicing aborted, reverting to Install of 'To'
2014-11-26 16:28:40, Info                  CSI    00000461 Processing Namespace [wcm://Microsoft.Windows.WinHTTP?version=5.1.9600.17415&language=neutral&processorArchitecture=wow64&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers]
2014-11-26 16:28:40, Info                  CSI    00000462 done
Is this the root cause?
2014-11-26 16:28:39, Info                  CSI    00000e99 Creating NT transaction (seq 2), objectname [6]"(null)"
Is there supposed to be a "null" going into whatever that is?

Online backup getting failed with error BR0278E - Invalid Argument

Hi All,
Online backup in Production system is getting failed when taken using DB13. Last week the SAP Production Server was migrated to SAN and it was up & running fine.
SAP System - ECC 6
OS - AIX 5.3
Database - Oracle 10g
Even the Archive log backup has been successful, but Online backup is failing. Following is the error log:
BR0280I BRBACKUP time stamp: 2009-09-10 12.00.46
BR0057I Backup of database: RTP
BR0058I BRBACKUP action ID: bebkzprw
BR0059I BRBACKUP function ID: ant
BR0110I Backup mode: ALL
BR0077I Database file for backup: /oracle/RTP/sapbackup/cntrlRTP.dbf
BR0061I 41 files found for backup, total size 97416.297 MB
BR0143I Backup type: online
BR0112I Files will not be compressed
BR0130I Backup device type: tape
BR0102I Following backup device will be used: /dev/rmt3.1
BR0103I Following backup volume will be used: RTPB01
BR0289I BRARCHIVE will be started at the end of processing
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0208I Volume with name RTPB01 required in device /dev/rmt3.1
BR0280I BRBACKUP time stamp: 2009-09-10 12.00.46
BR0226I Rewinding tape volume in device /dev/rmt3 ...
BR0351I Restoring /oracle/RTP/sapbackup/.tape.hdr0
BR0355I from /dev/rmt3.1 ...
BR0241I Checking label on volume in device /dev/rmt3.1
BR0242I Scratch volume in device /dev/rmt3.1 will be renamed to RTPB01
BR0280I BRBACKUP time stamp: 2009-09-10 12.00.46
BR0226I Rewinding tape volume in device /dev/rmt3 ...
BR0202I Saving /oracle/RTP/sapbackup/.tape.hdr0
BR0203I to /dev/rmt3.1 ...
We have checked using different tapes, restarted SAP, etc but could not resolve it.
Please suggest further.
Thanks
Vamsi

Hi Vamsi
Please go through below link
Re: onLine backup fails with error BR0278E
There is similar problem with the exact error you are facing for online backup and its solution is given in above link.
Let us know if this information was useful to you.
with regards,
Parin Hariyani

Time Machine backups suddenly failing with error 109 (console errors inc.)

I've been using Time Machine over my Airport Extreme Base Station for months without a single error, and all of the sudden it fails constantly with the error:
*The backup disk image “/Volumes/TARDIS-1/Derek’s iMac_001f5bf60eb1.sparsebundle” could not be accessed (error 109).*
I've tried selecting the drive again since it's mounted fine. It's mounted as TARDIS, not TARDIS-1, which I thought was a clue to the problem until I went to the Console to see all of the errors:
9/15/09 Sep 15 - 8:10:16 AM com.apple.backupd[12333] Attempting to mount network destination using URL: afp://[email protected]/TARDIS
9/15/09 Sep 15 - 8:10:16 AM com.apple.backupd[12333] Mounted network destination using URL: afp://[email protected]/TARDIS
9/15/09 Sep 15 - 8:13:35 AM com.apple.backupd[12333] Failed to mount disk image /Volumes/TARDIS-1/Derek’s iMac_001f5bf60eb1.sparsebundle (DIHLDiskImageAttach returned: 109)
9/15/09 Sep 15 - 8:13:35 AM com.apple.backupd[12333] Giving up after 3 retries.
9/15/09 Sep 15 - 8:13:41 AM com.apple.backupd[12333] Backup failed with error: 21
9/15/09 Sep 15 - 8:13:41 AM com.apple.backupd[12333] Ejected Time Machine network volume.
I've seen others say that Time Machine quit working after updating to Snow Leopard, but i've been running it since launch and the problems only appeared yesterday. Ideas?

I'm not sure why you call it a "phantom" drive, because I was quite intentionally connected to that network drive. In any case, I did as you recommended, in case that was the issue (though over the months I've often been connected to the network drive). Sadly, no dice.
9/15/09 Sep 15 - 8:50:18 AM com.apple.backupd[13136] Starting standard backup
9/15/09 Sep 15 - 8:50:18 AM com.apple.backupd[13136] Attempting to mount network destination using URL: afp://[email protected]/TARDIS
9/15/09 Sep 15 - 8:50:19 AM com.apple.backupd[13136] Mounted network destination using URL: afp://[email protected]/TARDIS
9/15/09 Sep 15 - 8:54:07 AM com.apple.backupd[13136] Failed to mount disk image /Volumes/TARDIS/Derek’s iMac_001f5bf60eb1.sparsebundle (DIHLDiskImageAttach returned: 109)
9/15/09 Sep 15 - 8:54:07 AM com.apple.backupd[13136] Waiting 60 seconds and trying again.
During the step "Making backup disk available..." in the Time Machine preference pane, looking in Volumes, I have:
lrwxr-xr-x 1 root 1 Sep 10 19:48 Macintosh HD -> /
drwx------ 13 root 398 Mar 10 2009 TARDIS
drwxr-xr-x 1 derek 12288 Mar 5 2009 Untitled
So it's properly connecting to TARDIS, it would seem, as root.

Backup keeps failing with error 0x07EF9

Started an initial backup (manually) over a weekend then stopped it before it had completed. Selected the option to start next backup at where it was stopped. Since then, the backup job keeps failing with the error
An unexpected error occurred during the operation. (0x07EF9)
Any ideas how to fix this. I have cancelled the schedule then rescheduled it but still the same result.
I have tried manually running it as well but it still fails.
John

Hi John,
Thanks for posting here!
It looks like something is blocking Azure backup. Could be an Anti Virus software on the computer, which is locking the files the Azure Backup is trying to access while backup is initiated. OR if there is a 3rd party backup software which is running at the
same time while azure backup is scheduled to backup files and folders. As a result the backup is failing with no luck.
You might want to start looking at the logs and see if you find anything which is causing this problem. This might help narrow down the issue.
Regards,
Sadiqh

Windows Backup still failing with 0x81000032 error

I have been trying for days to fix this problem. Tried all suggested fixes, I have 40GB free on both the disks I want to backup (of sizes 200GB and 362GB), I am trying to backup to a 2TB usb disk with 766GB free. All disks are NTFS, I have changed drive
letters and names of backup disk and computers data partition.
Ran "chkdsk /f" which required a reboot, ran "sfc /scannow".
I have zipped and uploaded recent Errors.evtx to a zipped file (fail.zip) although I have omitted 4 events, which were user profile service warnings which said " 1 user registry handles leaked from \Registry\User" ...ect I omitted these as I was
worried there may have been sensitive info in them. backup has worked fine until a couple weeks ago when this happened.
https://www.dropbox.com/sh/l1d1txpl19aq9yy/AACdRVCylOmTCnpOpAjmKdRGa Thanks, Harry
mountain climber

Hi,
The error information is:
Windows Backup skipped backing up system image because one of the critical volumes cannot be included
for backup. Check that volume is online and is formatted NTFS. (0x81000032)
Typically, critical volumes include the boot volume and the system volume. Let’s check the following
path to find the target volume:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsBackup\Status
And collect Windows Backup log in following path:
%windir%\Logs\WindowsBackup
Alex Zhao
TechNet Community Support

Windows Update KB2467173 fails with Error code 1603

My windows update is failing over and over again with this message and it won't update C++ redistributable that a new program I started using requires.
The event log says as follows:
Product: Microsoft Visual C++ 2010 x86 Redistributable - 10.0.30319 - Update 'KB2467173' could not be installed. Error code 1603. Additional information is available in the log file C:\DOCUME~1\me\LOCALS~1\Temp\Microsoft Visual C++
2010 x86 Redistributable Setup_20150210_173547615-MSI_vc_red.msi.txt.
Thank you in Advance.

I would recommend that you start with recommendations shared here: http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/failure-to-install-windows-updates-error-code/934854af-0e1b-451e-889c-2fa869bab82f
If this does not help then you will need to examine the txt log file (The path is in the error message) to get more details.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Windows Update KB2926765 fails with error code 8024200D.

Note: it was recommended that I post this to TechNet. It was originally posted at http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/vista-update-bug/ed9baacd-edd3-449f-b679-8f71614f3a15?msgId=ca75efe9-beea-41e9-afda-7ffe15f9b0f3.
Windows Update KB2926765 keeps failing to install. The error code is 8024200D.
I've run sfc /scannow with no errors.
I used the System File Checker tool http://support.microsoft.com/kb/929833/en-us.
I ran the System Update Readiness tool. http://www.microsoft.com/en-us/download/confirmation.aspx?id=1540
The update still failed to install.
I've also run the MGADiag tool and the Microsoft FixIt windows update (wu) tool.
I then downloaded the update from the Microsoft Update Catalog http://catalog.update.microsoft.com/v7/site/Home.aspx
and copied it to the Windows\CheckSUR\packages folder (after creating the "packages" folder) , and ran the Readiness tool again.
The update failed to install.
I ran the readiness tool again. This time the readiness tool found no errors.
=================================
Checking System Update Readiness.
Binary Version 6.0.6002.23186
Package Version 24.0
2014-06-14 15:33
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 2169
No errors detected
Checking CoreOS key for repairing corruptions.
Winner version: 6.0.6002.18971.
Processor architecture: x86.
Check key to be repaired: wcm://Microsoft-Windows-CoreOS?version=6.0.6002.18971&language=neutral&processorArchitecture=x86&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers\metadata\elements\ComputerName
Recreated value: @_type.
Recreated value: @dataOnly.
Recreated value: @default.
Recreated value: @description.
Recreated value: @displayName.
Recreated value: @handler.
Recreated value: @legacyName.
Recreated value: @legacyType.
Recreated value: @migrate.
Recreated value: @scope.
Recreated value: @xsd:type.
=======================================
The update still fails to install.
I also recently ran the "automatic troubleshooter" MicrosoftFixit.wu.LB.236326420485116200.3.1.Run.exe and still have the problem.
We're using Windows Vista Business SP2 32 bit upgraded from XP. Antivirus - Bitdefender up to date. Previous antivirus - Avira Antivir and AVG. Firewall - Online Armor. The last successful update installation was Security Update for Office 2003 (KB2726929).
It and other updates have installed successfully (after the KB2926765 failure) and KB2926765 keeps failing.
Thanks.

Go through the following thread:
Windows Update Error Code 8024200D
You may create another user account with administrative privileges and recheck the issue.
S.Sengupta, Windows Entertainment and Connected Home MVP

Windows 10 upgrade fails with error message "we couldn't update the system reserved partition"

HP and Microsoft both indicated my notebook was ready for upgrade to Windows 10, but when I tried to do the upgrade it failed - repeatedly - with the error message from Microsoft that "we couldn't update the system reserved partition." What to do?

The system reserved partition serves a purpose. If it is deleted, then the OS will not boot back up. In which case you are toast.ON THIS PAGE, it tells what the partition is used for.-The Boot Manager and Boot Configuration Data : When your computer boots, the Windows Boot Manager starts up and reads the boot data from the Boot Configuration Data (BCD) Store. Your computer boots the boot loader off the System Reserved partition, and it boots Windows from your system drive. I advise that you not do what CanhThanh is instructing

Windows 10 Upgrade Failed with error code 80004005

OK, I have downloaded Windows 10 Upgrade and it all goes well until the computer restarts. Once it boots up again, the upgrade does not continue and I just go back to Windows 8.1. I then see error code # 80004005 for the upgrade in the Windows Update history. I do not know what is going on. I read on HP's Notebook upgrade page I found the following:For computers with available storage of 128 GB or less, the upgrade might require you to provide a USB hard drive (32 GB or larger). HP does not recommend using an SD card.If your computer has less than 128 GB of free hard drive space you will be prompted to connect a USB hard drive to continue with the installation. Use a blank USB hard drive 32 GB or larger. When the installation is complete, Windows 10 Upgrade will copy the windows.old file to the USB hard drive. Keep this file on the USB hard drive. It will be required to Go Back to the previous operating system if necessary.My computer definately fits in that criteria since it is equiped with a 128GB SSD. When I start the upgrade, I do not get prompted for an external hard drive. I have also tried the Media Creation Tool and ISO/USB and get the "Windows 10 Installation has Failed" error.

The system reserved partition serves a purpose. If it is deleted, then the OS will not boot back up. In which case you are toast.ON THIS PAGE, it tells what the partition is used for.-The Boot Manager and Boot Configuration Data : When your computer boots, the Windows Boot Manager starts up and reads the boot data from the Boot Configuration Data (BCD) Store. Your computer boots the boot loader off the System Reserved partition, and it boots Windows from your system drive. I advise that you not do what CanhThanh is instructing

Backup job fails with error

The error message is: RemoteOperationException: Failed to establish input-streaming thread
In researching this, there was an article that talked about increasing the ThreadPool to MEDIUM. But this didn't help.
If I retry the backup after it fails, it runs without any problem.
This is GC 10.2.0.3 on Sun Solaris. Does anyone have a workaround for this?
Thanks.

Try this script...
File Naming Format DBname_YYYYDDMM.BAK
DECLARE @name VARCHAR(50) -- database name
DECLARE @path VARCHAR(256) -- path for backup files
DECLARE @fileName VARCHAR(256) -- filename for backup
DECLARE @fileDate VARCHAR(20) -- used for file name
-- specify database backup directory
SET @path = 'C:\Backup\'
-- specify filename format
SELECT @fileDate = CONVERT(VARCHAR(20),GETDATE(),112)
DECLARE db_cursor CURSOR FOR
SELECT name
FROM master.dbo.sysdatabases
WHERE name NOT IN ('master','model','msdb','tempdb') -- exclude these databases
OPEN db_cursor
FETCH NEXT FROM db_cursor INTO @name
WHILE @@FETCH_STATUS = 0
BEGIN
SET @fileName = @path + @name + '_' + @fileDate + '.BAK'
BACKUP DATABASE @name TO DISK = @fileName
FETCH NEXT FROM db_cursor INTO @name
END
CLOSE db_cursor
DEALLOCATE db_cursor
File Naming Format DBname_YYYYDDMM_HHMMSS.BAK
If you want to also include the time in the filename you can replace this line in the above script:
-- specify filename format
SELECT @fileDate = CONVERT(VARCHAR(20),GETDATE(),112)
with this line:
-- specify filename format
SELECT @fileDate = CONVERT(VARCHAR(20),GETDATE(),112) + REPLACE(CONVERT(VARCHAR(20),GETDATE(),108),':','')
Raju Rasagounder Sr MSSQL DBA

Time Capsule backup constantly failing with error message - error message 11 but different file.

Hi
I have had problems with my backup failing since 12 June
Most of the time I get error message 11 (have had error message 31 once) and each time it is a different file. The last failure gave this message in console
17/06/2011 13:20:11 com.apple.backupd[1743] Indexing a file failed. Returned 200 for: /Applications/Microsoft Office 2011/Office/CalendarCore.framework, /Volumes/Time Machine Backups/Backups.backupdb/Stephen Dalziel’s iMac/2011-06-16-232227.inProgress/10F26F18-689F-47D2-959E-964D07E82445/Macintos h HD/Applications/Microsoft Office 2011/Office/CalendarCore.framework
I have followed Pondini C3 by excluding the file from the first message but then failure occurred with a different file so excluded that and it failed again.
Went through repair A5 - that took an age even connecting via ethernet - still not working.
I have to confess that before I got to Pondini troubleshooting I googled the problem and a forum said delete latest and partial backups from sparse bundle - I did this via Finder and now I can't get rid of them from trash - discovered via Pondini I shouldn't have done this and tried E6 but without success.
What are my options?
I can use a computer but technical jargon is like Hieroglyphics to me so if you can reply in simple plain English that would be useful

Stephen Dalziel wrote:
a forum said delete latest and partial backups from sparse bundle - I did this via Finder and now I can't get rid of them from trash - discovered via Pondini I shouldn't have done this and tried E6 but without success.
Did you delete the Latest alias, and/or the most reccent time-stamped backup? If so, your backups are toast.
Your only option is to erase the Time Capsule's disk and let Time Machine start fresh. See To erase everything on the Time Capsule’s internal disk in #Q5 of Using Time Machine with a Time Capsule.

Windows 7 Backup is Failing with error 0x81000101

Similar Messages

Maybe you are looking for