Windows 7 Beta problem - PLEASE HELP ME :(

I'm running the recently released Windows 7 public beta, and have so far got iTunes running and all my songs sorted out fine. But when I try to connect my iPod Classic, neither iTunes nor my PC recognises it, except for an unresponsive "iPod" entry under "Other Devices" in the device-manager (unresponsive in the sense that I have no option other than to scan for changes).
I've tried everything I can find on here: the 5Rs, some other stuff about uninstalling the device then reinstalling... everything! I haven't made any changes to the PC which could have prevented the iPod working - except installing the Windows 7 beta of course, but from what I've read online other people have had no issues with it and their iPods. Also, the PC worked with my iPod fine when it ran Vista.
Can anyone help me? I feel like I've tried everything.

IMHO u should write microsoft so they can improve that feature...
it is a beta, remember....
good luck..

Similar Messages

  • Z97M Gaming windows 7 installing problem, please help

    hi everyone. I hope someone could help me. This is my setup I just built:
    MSI Z97M Gaming (latest bios updated, v1.4)
    Intel Core I5 4690S Cpu
    2 sticks of Gskill DDR3 (2x4GB) 2400Mhz
    Nvidia 970GTX 4GB PCIE video card
    Samsung EVO 840 - 250GB SSD (latest firmware updated)
    Corsair 750W PSU
    And this is the problem: when i boot (from USB) Windows 7 SP1 setup, it runs fine until it asks me for a driver (which is missing) in order to proceed with installation. I suppose it's SATA driver, so I've copied last version of Asmedia SATA driver in my usb key. But when i point to it, windows setup says that no driver has been found! So it doesn't show the ssd and I can't proceed with setup. I've tried every subfolder of the "asmedia_sata_win78" main folder.
    Also, I set LEGACY+UEFI mode in bios. I've also tried IDE mode for the sata controller, but nothing works
    Any suggestion, please? Sorry for the bad english

    do you have any other storage to try say standard HDD? to try it instead this SSD
    Quote
    Still, I boot from usb drive, still I point to intel 32bit storage drivers, still windows shows "Intel 9 chipset series SATA AHCI controller". But it doesn't find the hard disk 
    i suspect something isn't ok with your installation disk
    since its unclear is it 32bit or 64bit and since accept 32bit drivers only
    can you use a better one? and to make sure that it would have SP1 integrated

  • Windows 8 installation problem, please help..

    I tried to install windows 8 (legal) on my 5/2012 Macbook Air using Bootcamp. Everything was ok since I entered the disc-choosing part. On "bootcamp partition" the installation program says "unable to install windows to this partition because of missing drivers, try to enter Bios". When I restart the computer, only the Windows logo is able to be seen and thats all, now it´s impossible to even enter the Windows installation programme. But, when I disconnect my flash disc containing W8, Mac is still booting W8 installation saying "No bootable media found". Is there any possibilty to enter my MacOS, system choice, or at least to download new MacOS and format the disc?
    Thank you so much....

    @filisipi: I am not sure if I understood your problem correct. Holding down the "Alt"-Key after turning on the power of your MBA should give you the joice between all operating systems recognized at this point in time. This should provide the way to boot again with Mac OS.

  • WINDOWS 7 UPGRADE PROBLEM, PLEASE HELP

    Hi, I am in Australia, and have a 64-bit HP DV7.  I filled out the application form to upgrade but when I put the model number in, it automatically chose wiindow home premium 32-bit - the problem is, it is greyed out and won't let me change it to 64-bit...I can't place the order as it's wrong for my operating system. Any help/ideas would be greatly appreciated.  Many thanks
    This question was solved.
    View Solution.

    Hey there! I would contact HP Support directly regarding this. They may be able to get you the correct version.
    *Remember to mark your questions solved and click the "Kudos" star to show your thanks!

  • Windows 8 driver problems, please help

    hello,
    i was trying to clone my windows partition the other day with winclone 2.2 to expand it, but that didn't end well, i had a perfectly working windows 7.
    so, when i lost my bootcamp partition, i decided to give windows 8 (customer preview) a try.
    Unfortunately, the bootcamp drivers only work in windows 7 (even if u run them in windows 7 compatibility).
    i tried to install the drivers one by one manually, some have worked, and others have not.
    Working:
    Wireless reciever
    keyboard
    trackpad (was, because i deleted the drivers and reinstalled them, so i lost this driver that was built in)
    graphics card
    Not Working:
    trackpad (was, because i deleted the drivers and reinstalled them, so i lost this driver that was built in)
    media keys (brightness, keyboard illumination, pause play rewind FF, volume keys and eject)
    ambient light sensor
    multi touch gestures for trackpad.
    can anyone give me a way to get the drivers to work?
    MacBook Pro 15'' 2.0 GHz Snow Leopard 10.6.8 early 2011 model

    nooo I did not say or suggest they they will work, or easy or with OEM DVD.
    But if you are going to use 8 go ahead but plan to redo (unlikely to be an upgrade install).
    You still have to look around and see what others have managed to do with some not working drivers.

  • My MACBOOK PRO NEVER LETS ME OPEN AUTOTRADER AND WHEN I TRY TO OPEN IT GETS FROZEN AND IT FREEZES OTHER WINDOWS AS WELL. Please help me to sort this problem out asap. Thanks

    MY MACBOOK PRO NEVER LETS ME OPEN AUTOTRADER AND WHEN I TRY TO OPEN IT GETS FROZEN AND IT FREEZES OTHER WINDOWS AS WELL. Please help me to sort this problem out asap. Thanks

    To prevent this being accidentally activated in the future go to SystemPreferences>Keyboard>Keyboard Shortcuts>Universal Access and uncheck all the boxes.

  • Windows - No Disk Error - Please help!

    Windows - No Disk Error - Please help!
    Hi,
    I have the following set up:
    * Lenovo T-61p
    * Windows XP Pro, SP 3
    * HP Photosmart 8250 printer (with nothing plugged into the various card readers, and USB slot in the printer)
    I am getting the following error:
    Windows - No Disk
    Exception Processing Message 0xc0000013 Parameters 0x75CE023C
    0x84C40C84 0x75CE023C
    I have done a lof experimenting and thru process of  elimination, and believe I have determined that this only happens when the HP Photosmart 8250 printer is plugged in to the USB slot of the computer.
    I can stop it from happening by safely removing hardware, and removing the drive that the 8250 creates on your computer when you plug it in.  In my case, this is drive E.  I'm guessing if there was something in the the various card readers, and USB slot in the printer, that's what those would be, but I don't those use those functions of the printer.
    I understand there is more at work than simply the printer, because I did not used to get this error, so some software changed as well, that is scanning all ports, and finding a drive that has no disk, and producing the error.
    A simple google search finds a lot people all over the world having this problem, and are solving it in different ways, because the suspected source is different: Norton, HP, etc.
    I have tried everything I have read, and the only thing that works was my own idea, of manually safely removing the drive the printer creates each time I plug in the printer.
    Anyone every any better, more permanent solutions?  Or know what the real root of the problem is?  What is scanning all the drives and being showing an error message because it found an empty drive?
    Thanks and Happy Holidays/New Year!

    I've been getting the same error on my 4G nano for the past week. I've had my nano for about a month and the first few weeks were fine. Tried it on 2 different computers (Vista and XP) and same problem. Tried it on a 3rd (XP) and it started ok. Problem started coming back after a day.
    I was able to find a quick fix though. I noticed that sometimes the message says something like "iexplore.exe... no disk..." even if I don't even use IE. What I do is end iexplore.exe on task manager before running iTunes and syncing my nano. I don't get the error whenever I do this, but one drawback is that the contents of my nano suddenly pops up in a window - even when disk use is not enabled.
    I've reset/restored my nano dozens and dozens of times to make sure it's clean. Leads me to believe it's a driver issue. Either that or I have a friggin malware problem I can't seem to find.
    I'll be posting updates every now and then. I'm no expert so I'm hoping an Apple expert also steps in to give some input.

  • X-Fi Fatal1ty Plat1num Champion Ed. problem, please help!

    9X-Fi Fatalty Platnum Champion Ed. problem, please help!? Hi there everyone,
    So i have a X-Fi Fatalty Platnum Champion Ed. and a computer with Windows 7.
    I've searched the web and i found many people saying that the card it's working and perfectly compatible so i would like to exclude this option as far as the problems that i'm having.
    So, right out of the box i've placed the front panel in with the ribbon cable and the power connected to it, then i connected the other end of the ribbon cable and finally placed the card in one of the PCI slots i have free.
    Now, when i start my PC, i don't hear any particolar "beep messages" but nothing will come on the screen, in few words my PC will not boot at all. I can hear the HDD spinning, everything sounds normal except for that "little" problem.
    So, i re-did all the connections thinking that maybe i did something wrong, but following the instruction i did exactly as told. So i tried again to power up the computer and i've noticed that the X-Fi logo is lit up (red light) and.. I don't really know if that means something or it's just something aside that doesn't really matter.. But, what is it's The PCI card is broken or there's something else?
    I did try to disable the sound card (integrated mobo sound) from the BIOS but that didn't change anything. I did try all the software options but this looks like more of an hardware problem (please correct me if i'm wrong and/or i've missed something).
    There's something that popped up in my mind.. the PSU. I noticed that i have a 300W PSU (mm.. low, isn't it's)?and i was wondering if that's enough or i need a more powerful one.. and if that's may be the case for the PCI to not work at all causing all i've already explained above. I mean.. It seems like i've installed a dead peripheral and that's impeding the computer to start up..
    I don't know.. I need clarification and help, PLEASE.
    Thank you very much in advance!

    Look at the beta thread sticked above but good luck waiting for a new driver. That beta driver has been there since January and although better than the normal driver it is still crap.
    All the boot type issues are with the SSD but if you getting in game crashes etc... under windows 8 that is simply that the driver stinks.

  • Problem Please help me.....Let me know the area to look for it

    Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
    Server Error in '/' Application.
    Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
    Stack Trace:
    [SoapException: Problem with SAP/BAPI.
    SAP.Connector.RfcCommunicationException: Connect to message server failed
    Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
    LOCATION CPIC (TCP/IP) on local host
    ERROR service 'sapmsPRD' unknown
    TIME Wed May 04 08:59:06 2005
    RELEASE 620
    COMPONENT NI (network interface)
    VERSION 36
    RC -3
    MODULE ninti.c
    LINE 428
    DETAIL NiPServToNo
    SYSTEM CALL getservbyname
    COUNTER 1
    at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
    at SAP.Connector.SAPConnection.Open()
    at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
    at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
    at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
    at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
    System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
    System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
    SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
    SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
    SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
    SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
    SoftwareKeyUI.search.LoadRegionDetails()
    SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
    System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
    System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
    System.Web.UI.Page.RaiseChangedEvents() +115
    System.Web.UI.Page.ProcessRequestMain() +1099

    Hi
    You should make a mapping for the service sapmsPRD in your /etc/services file (On Windows: C:WINDOWSSYSTEM32DRIVERSETCservices). If your instance number is 00 you will have to add the following entry:
    sapmsPRD      3600/tcp
    Good luck!
    René van Es

  • [TV@Master] Problem please help

    I have Msi.mother board PT8-Neo -LSR ,  Model No.Ms-6799 , main board bios -Phonenix ,maind board version i updat it to 2.2 , cpu size 2.4 G celleron D/256/533 , memory size 256DDram (400),display card Nvidia Riva TNT2 model 64
    the problem that i face it when i put my TV@nywhere -master card ,the pc stop at the main page that show the biso version and name of bios company and the letters do not bost well it look like a virus work , and when i take tha card off the pc go normally , i tried put it to other PCI the same problem
    please help

    i meany by fix the problem of getting the pc go on to windows with card on PCI salot but i still have the broblem of the driver
    please read my reply again
    my operating system is win me and i have also another pc have XP
    when i log in to windows the system show that found my TV@nywhere card but it didnt took the installatin driver for it i tried to install the driver directly
    but it give me this 2 mesages  when i try to install the driver
    MSI TV card is not found ,stop the installation
    the other message is
    MSI pvs driver installatin failed
    i download the driver from msi page also give me the same messages
    for known on Device Manager it show me that the driver there but do not have the driver and the ? mark beside them
    what to do now 

  • My iphone 4 is acting like crap right i can't even restore it everytime i try to reboot it my iphone freezes at the apple logo it is ******* to the point where i just want to smash it how do i solve this problem please help?

    my iphone 4 is acting like crap right i can't even restore it everytime i try to reboot it my iphone freezes at the apple logo it is ******* me off to the point where i just want to smash it how do i solve this problem please help?

    Don't worry, just follow these steps to fix iPhone stuck on Apple logo
    => First of all Start your Computer and then connect with Internet connection, now Download the latest version of the iTunes application
    => Now install the iTunes application in your System and connect your Device with computer via Data cable
    => Now connect your Device with iTunes application and then Tab on summary option, see in the left side bar of iTunes
    => Now Select restore option from iTunes and then confirm the Restore Message for better results. After this unplug your Device and Restart it
    I hope that will surely
    Thank you...

  • My computer keeps saying "The iTunes Library.itl file is locked, or you do not have write permission for thsi file." I am running iTunes 10.5 on a windows 7 computer. PLEASE HELP!!!

    My computer keeps saying "The iTunes Library.itl file is locked, or you do not have write permission for thsi file." I am running iTunes 10.5 on a windows 7 computer. PLEASE HELP!!!

    sorry, i don't have the answer, but i think i have the same problem if i may expound:
    I did a windows 7 update.... and today i tried to modify some song info in iTuens... I selectd an album with 12 songs in it, right clicked for "Get Info" tied to update album info including year, album artist, etc... but it would not take. I checked the security setting in the windows folder and confirmed i had admin rights etc...still no go...

  • Hi, Please tell me how can I send the Music Videos to the I Pod From the Computer, I'm so upset about this problem, Please help me ASAP.

    Hi, Please tell me how can I send the Music Videos to the I Pod From the Computer, I'm so upset about this problem, Please help me ASAP.

    Here:
    iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
    or
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad

  • 990fxa gd80 raid 0 problem please help me i am begging you

    so i will start with my set up
    990fxa dg80 mb
    fx 8350 cpu
    780ti
    8 gig of ram
    256 hdd
    2x samsung 850 evo
    750 hybrid drive
    So at this stage all my data is on the 750 hdd and the disk is stored away. my problem started with me buyng 2 mx100 256 ssds . If my bios is set to ide or ahci they work fine i had my windows instaled on 1 of them all woks fine. Once i switch my bios to raid ( before i set up my raid 0) boot up win 7 instalation i do not see any drives ( i know is normal) load the drivers for the raid controler (sb950 for w7 as it says in themanual) and only my 256 hdd shows up but not the ssds . Than i set them up in ld raid 0 same problem . Tryed on another 2 mbs ... 1 same and a gygabite same problem. So i was sure there is a problem with ssds. I got rid of them got 2 new 850 evo 250 gb same problem. please help me i am so desparate i am willing to pay woth body organs for help

    I..have a few questions...
    1. You set BIOS to the RAID mode, and under that option there's a Board SATA RAID ROM, do you set it as Legacy ROM?
    2. Did you enter Ctrl+F to initialize the drives/Delete Array(If they're used SSDs) and create RAID0?
    3. Is your Win7 64 bit or 32 bit?
    4. I assume it's 64 bit, did you copy the W764 folder for driver loading?
    And make sure you get the driver from here:
    http://www.msi.com/support/mb/990FXAGD80.html#down-driver&Win7 64

  • I haven't updated my iPod in forever so when the new update came out I tried to update it but it kept freezing my computer so I had to manually shut it off and restart it. I have windows btw. Someone please help me !!!!!!!!

    I haven't updated my iPod in forever so when the new update came out I tried to update it but it kept freezing my computer so I had to manually shut it off and restart it. I have windows btw. Someone please help me !!!!!!!!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

Maybe you are looking for