Windows 7 Boot Issues (After Installation via Boot Camp)

Hi All
Today I attempted to install Windows 7 x64 on my mac via boot camp.
The install went fine, and I installed the necessary drivers using my Mac OSX Install DVD.
When I restarted I could select Windows as the disc I wanted to boot into, but after selecting it, I only saw the white blinking cursor at the top left hand side of the screen for a few seconds before the computer restarted and booted into OSX.
I tried it a few more times just to make sure it wasn't a one off.
I then inserted my Windows install disc and attempted to repair startup. There were no issues detected.
I can also successfully boot into Windows 7 through VMWare Fusion in OSX, leading me to believe that there must be some thing wrong on the Mac end of booting (although I'm not familiar with the booting process in Mac, so I'm not really sure).
If anyone has any idea what's wrong, I'd really like a hand!
Thanks

You might want to visit the Boot Camp forum where the Boot Camp gurus hang out. https://discussions.apple.com/community/windows_software/boot_camp

Similar Messages

Windows 7 not completing installation via Boot Camp

Hi everyone,
I'm having a devil of a time installing Windows 7 on my 27" Late 2010 iMac. I'm using the latest version of Bootcamp and a brand new copy of Windows 7. I'm following all the Boot Camp instructions, create the partition (I want at least 150gb), insert the Windows 7 disk and install Windows 7. I choose the partition, format it, then click install. It goes through all the installation steps up until "Completing Installation...", where it will hang.
I've tried now installing Windows seven times. I've redone the partition. I read somewhere that it could be hanging on usb drivers. While I don't have an Apple mouse, I've tried installing it with just my Apple branded keyboard and it still won't install. I've defragged my hard drive, still hangs. I've crossed my fingers. I've cursed at it. Nothing seems to work.
Does anyone know what could be preventing the in

The Elite Technician wrote:
It is the Windows 7 64-bit disc that came with my Dell a while back, but I no longer have that Dell. I have also tried using my Vista Ultimate 64-bit disc and my Windows XP Pro SP3 disc, but none of these worked. Same result - white screen. All of these discs came with my previous PC computers that I used to have, but I no longer have those PCs. Only their discs. Is using discs that came with other computers for those computers the problem? Do I have to use a Windows disc that has not been used before?
Message was edited by: The Elite Technician
The disks that come with PCs most often include only the drivers and applications required by the PC they were made for. You can not use these disks to install on other than the original hardware.
Message was edited by: BobTheFisherman

Install Windows 7 Ultimate 64-bit via Boot Camp

I am using a 17" MacBook Pro with and Intel i7 2.66 GHz processor, 8GB 1067 MHz RAM and a 7200RPM 500GB hard drive. I am trying to install Windows 7 Ultimate 64-bit via Boot Camp. I do what Boot Camp tells me to do, but when my MacBook Pro restarts to boot from the Windows 7 disc, all I get get is a white screen! I have tried to boot manually from the Windows 7 disc, but it won't boot. It freezes on the white screen and I have to reboot the Mac using the Mac OS X partition. How can I fix this ASAP so I can install Windows 7? I need to get it done TONIGHT! I just found out that I am running the 3.0.2 version of boot camp on my Mac OS X 10.6.4 version. Is this the problem? Do I need to update my Boot Camp Utility? If so, how do I do it or do I have to install Windows Vista first since the update is a .exe file?
Message was edited by: The Elite Technician

The Elite Technician wrote:
It is the Windows 7 64-bit disc that came with my Dell a while back, but I no longer have that Dell. I have also tried using my Vista Ultimate 64-bit disc and my Windows XP Pro SP3 disc, but none of these worked. Same result - white screen. All of these discs came with my previous PC computers that I used to have, but I no longer have those PCs. Only their discs. Is using discs that came with other computers for those computers the problem? Do I have to use a Windows disc that has not been used before?
Message was edited by: The Elite Technician
The disks that come with PCs most often include only the drivers and applications required by the PC they were made for. You can not use these disks to install on other than the original hardware.
Message was edited by: BobTheFisherman

Windows xp will not boot up after installation of desktop software 4.3.

windows xp will not boot up after installation of desktop software 4.3. Where do I start to get my p.c. going again ???

I get the message that a recent hardware or software change might have caused this.
The computer does not boot up in safe mode or last known good configuration.
I'm glad you think the software has nothing to do with it, but perhaps you can also explain why this problem started as soon as I downloaded the desktop software and tried to restart the computer.

Boot issue after shutdown plus power - no problem after restart or after removing power cord

Hello,
I have a Pavilion Elite m9275.nl desktop. I experience boot issues after a regular shut down.
After a regular shut down and pressing the power button within a few seconds/minutes, it keeps hanging in the HP startup / BIOS screen, Windows 8 won't boot, the hard drive light doesn't flash;
After a restart from Windows (instead of shut down) it boots correctly from the c-drive. No hard-drive problems at all;
After a shut down and removing the power cord for 10-15 minutes, it boots correctly from the c-drive. No hard-drive problems at all.
When the PC does not boot, F10 (to enter BIOS settings) does not work neither, so it seems to be a hardware or BIOS issue.
I already replaced the CMOS battery and already loaded default BIOS settings.
During a succesful boot or after pressing F10 (to enter BIOS settings) the screen shows some disk information right after the BIOS. This is the screen that says something like "press CTRL-I to start configuration utility". During a succesful boot the hard disk light flashes shortly before displaying that screen. During an unsuccesful boot the hard disk doesn't flash.
Before replacing a hardware component, I need to know what to replace...
Could it be the hard disk controller or hard disk is defect?
Where is the hard disk controller stored?
Can I upgrade the firmware of the hard disk controller?
BUT: why does it work when I remove the power cord for 15 minutes or after a restart (instead of a shutdown and than pressing power)?
Many thanks in advance,
Sjoerd-Jaap Westra

sjwestra
I apologize for the delay in responding to your post. First I am glad you were able to resolve your initial issue and to help I have included a link to a document 'Bios Setup Utility Information and Menu Options' that will provide you with instructions on how to enter the Bios and provides additional information on navigating it as well.
http://goo.gl/HIclUV
If you need any further information please re-post.
Thank you for your post.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Cannot boot to Windows disk to install XP (via Boot Camp)

I've got an issue w/ my late 2006 24" Imac that I have not been able to resolve.
Last week, I had the local Apple store replace the Video card in my Imac. The installed card was a nvidia 7300 GT. It was replaced w/ a 7600 GT (or at least that is what is reporting in System Profiler). My Imac had Tiger running w/ bootcamp beta 1.1.1 & a Windows XP partition.
After the card replacement, I was no longer able to boot to Windows. Selecting the Windows HD at boot-up resulted in just a grey screen. The tech at the Apple store said to try and do a Windows repair install, which seemed fine to me. Got the Imac home and found that I could not boot to the Windows install CD. Same result: a plain grey screen. You could hear the drive accessing the disk, but I saw nothing on the screen.
Went back to the Apple store, where the tech said all he could reccomend was a full wipe and re-install of the Mac OS & then new Windows install via boot camp. I was loath to do this for obvious reasons, but I went ahead and wiped the disk and installed Snow Leopard, with all updates.
So, of course, after creating the boot camp partition, I am STILL not able to boot to the Windows install disk. Everything else works fine, but when I try to boot to the Windows disk, I get just that same grey screen. I have tried re-burned copies of this disk, as well as two other Windows XP disks. I've also tried a Windows 7 disk; None of them worked.
So I ask here: Has anyone ever seen anything like this, and been able to get it resolved? What steps should I try next? Thanks for any help or insight you can provide.

WHY did you take it in?
And go back and have them provide (if they or AppleCare can) with a proper correct 7300GT. I don't see 7600GT as being used in iMac.
http://support.apple.com/kb/SP28
http://www.apple.com/support/imac/intel/
http://www.apple.com/support/bootcamp
Buy a copy of Snow Leopard for $29 to get Boot Camp 3.0. I assume you wanted Boot Camp 2.2 and that you need to upgrade to XP SP3 or later at this point.
As for burning Windows ISO - from where? and how? Disk Utility can, but not well, and to do so needs to be burned at REDUCED 2X if it is to work.
I'd say 75% of Store Geniuses are clueless when it comes to Windows on Mac, unless they've actually done it themselves and have hands on experience and "quote" gotten their hands dirty "end-quote."
That or build your own off the shelf Sandy Bridge based system.

Can't boot OS after installation on TS200 with ServeRAID card

Hi,
I have a Lenovo TS200 which I am having problems with. It is fitted with a ServeRAID card and a single 2TB HD (configured as JBOD and set bootable).
After having installed Windows Server 2008 (which installs fine) it won't boot. Basically it seems that the boot device can't be
found (so Windows doesn't even get to load). Also I've had the same issue with WHS v2 so it's not specific to the OS.
BTW, during the installation of the OS I needed to add the drivers (via USB) for the ServeRAID card.
When I look in the BIOS boot settings I can see a new device that seems to have been automatically added by the installation
process. I have tried all of the sensible boot options in the BIOS.
Another thing I have noticed is that during the continual boot cycle/loop I'm NOT seeing the Network Card or ServeRAID BIOS as I normally do as follows (as an example):
Initializing Intel(R) Boot Agent GE v1.3.27
PXE 2.1 Build 086 (WfM 2.0)
Initializing Intel(R) Boot Agent GE v1.3.27
PXE 2.1 Build 086 (WfM 2.0)
LSI MegaRAID SAS-MFI BIOS
Version 4.14.00 (Build Jan 29, 2010)
Copyright(c) 2010 LSI Corporation
HA -0 (Bus 26 Dev 0) ServeRAID M1015 SAS/SATA Controller
0 JBOD(s) found on the host adapter
0 JBOD(s) handled by BIOS
0 Virtual Drive(s) found on the host adapter
0 Virtual Drive(s) handled by BIOS
Press <Ctrl><H> for WebBIOS or press <Ctrl><Y> for Preeboot CLI
I have tried setting the BIOS back to defaults but that's not helped.
Any thoughts appreciated.
Cheers Ian

Which RAID card do you have, and what's your HDD model/type?
And of course assuming uEFI and firmwares have been updated to the latest?

W520 hangs on Windows 7 Pro x64 installation, cannot boot live CD

Hi Everyone!
I decided to reach out to the community for some intelligence that I have not been able to obtain elsewhere. Here's my story in details in case someone can find a break on any of them ...
I purchased my W520 in November, 2011 with 1 year warranty and used it without issues until last week. One morning when I started the laptop, it loaded Windows 7 Pro x64, I logged in. After loading the desktop, I locked the screen/user and stepped out for a minute. When I came back, the screen was frozen and after a few minutes of waiting I manually powered off the laptop.
Upon restart, Windows 7 would hang on the logo screen and restart in a few minutes. I was able to restart under Safe Mode, however, which enabled me to create the rescue DVD's.
I decided to re-install the OS, but the installation would hang on the Windows logo screen again. This was also attempted with all accessories (usb kbd, usb wireless mouse, and display I also tried w/o the battery) disconnected. Then I thought, that it could be a bad hdd - I tried installing XP Pro but got the BSOD with a bad hdd error code. At that point, I attached the hdd to a working PC and ran checkdisk which found no errors. The problem persisted even with unpartitioned disk and a spare hdd that I had on hand. What intrigued me was that no linux live CD could load (it would freeze on the loading screen).
After this, I flashed the BIOS to the newest version without any issues during the flash process. The Windows 7 Pro x64 installation would hang again at the usual logo screen. I also tried with different DVD source... Memtest did not show any problems either.
Then I called an IT support guy who was not experienced with the issue and took the laptop for bench testing, and after four days of back and forth the IT company was inconclusive that the issues is most likely caused by a bad BIOS.
This happened around March 21, 2013 after Windows 7 installed updates (not sure if this could be related). The weird part is that the W520 worked fine for a year and four months and when it crashed I was able to use Safe Mode, access and flash BIOS, but was unable to run new installation or live CD's.
Is there anything that I am missing? Has anyone had the same experience? What is the conclusion according to you - it is really bad BIOS chip or just a UEFI-related setting?
Thanks for reading and trying to help!
Configuration:
Processor
Intel Core i7-2620M Processor (2.70GHz, 4MB L3)
Operating system
Genuine Windows 7 Professional 64
Operating system language
Genuine Windows 7 Professional 64 English
Display type
15.6" HD+ (1600 x 900) LED Backlit Anti-Glare Display, Mobile Broadband Ready
System graphics
NVIDIA Quadro 1000M Graphics with 2GB DDR3 Memory
Total memory
4 GB DDR3 - 1333MHz (1 DIMM)
Keyboard
Keyboard US English
Pointing device
UltraNav with TrackPoint & touchpad plus Fingerprint reader
Camera
720p Camera
Storage subsystem
Internal RAID - Not Enabled
Hard drive
500 GB Hard Disk Drive, 7200rpm
Optical device
DVD recordable multiburner
System expansion slots
Express Card Slot & 4 in 1 Card Reader
Battery
9 cell Li-Ion Battery - 55++
Power cord
Country Pack North America with Line cord & 170W AC adapter
Integrated WiFi wireless LAN adapters
Intel Centrino Advanced-N + WiMAX 6250
Integrated mobile broadband
Integrated Mobile Broadband - Upgradable
Language pack
Language Pack US English
Fingerprint Reader

Sir:
I'm not entirely sure what you mean when you write "BIOS v1.40 settings that will make it possible to install Windows 7 Pro 64", but, you can download the 1.40 BIOS (which appears to be the most recent release) from this link: Device Driver File Matrix - W520 , and if you have any concerns about the BIOS settings not being appropriate, just enter the BIOS setup manager (tap the F1 key repeatedly when the laptop is booting) and select 'revert to defaults' or similar.
Michael
W520 (4270 CTO), which replaced a W500 (4062-27U), which replaced a T42P, which replaced an A21P...

[SOLVED]Can't boot Arch after installation-grub use wrong uuid in bios

Hello I would like to ask for Your help and say hello. I'm new here.
I have one big problem with Arch. Can't boot it after base installation. The same problem with Arch, that was mentioned in this topic:
https://bbs.archlinux.org/viewtopic.php … 7#p1294597
I have the same problem and the same error:
No such Device: ad4103fa-d940-47ca-8506-301d8071d467.
Loading Linux core repo kernel ...
error: no such partition.
Loading initial ramdisk ...
error: you need to load the kernel first.
Press any key to continue..._
I'm new here, and with Arch, could you explain me how to fix it? I tried the solution given in the link above, several times but with each time i have errors and warnings from the post 1 in mentioned topic. I installed my Arch from usb thumb drive. Maybe this is something to do with it? Also, my hard drive that Arch is installed on is being connected to a "raid card" named Adaptec, but during installation my disk is being found so i think that drivers is present and works ok, so it is not related to this, also there is no raid present, i use it only as a mean to connect to motherboard because there is not enough sata port, and because:
https://bugs.archlinux.org/task/35626
he wrote that this error is also on virtualbox, so it is not my fault and Adaptec related issue.
I haven't tried this yet:
Sotanaht,
I had the exact same problem as you, but I was able to fix it by replacing the bad grub.cfg file with the grub.conf file found in the same directory. If you try this do not forget to back up your original file (just in-case smile)
because i don't know much about it, don't want to destroy data on my hard disks or to destroy my other distros (i use Ubuntu with derrativates such as Mint, Kubntu, Lubuntu, Xubuntu, and Slackware 13.37 and 14.00).
If you could explain it in details i would be really happy.
I could post something about my setup, please write what. My computer is:
-AMD X4 PII 955 runinng at 3.2GHz
-4GB DDR2 runinng at base clock (800 if i remember correctly)
-about 7 hard drive disk connected to a sata ports, one adaptec drive that i mentioned above and one dvd-rom
-nvidia GTX260
-850W PSU Chieftec
Last edited by firekage (2013-07-02 08:11:29)

Yes, of course. I did it several times with
grub-mkconfig -o /boot/grub/grub.cfg
and the result is always the same - Error posted above.
Here is my grub.cfg file:
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 ad4103fa-d940-47ca-8506-301d8071d467
else
search --no-floppy --fs-uuid --set=root ad4103fa-d940-47ca-8506-301d8071d467
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_input console
terminal_output gfxterm
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-ad4103fa-d940-47ca-8506-301d8071d467' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 ad4103fa-d940-47ca-8506-301d8071d467
else
search --no-floppy --fs-uuid --set=root ad4103fa-d940-47ca-8506-301d8071d467
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=UUID=ad4103fa-d940-47ca-8506-301d8071d467 ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux.img
menuentry 'Arch Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-ad4103fa-d940-47ca-8506-301d8071d467' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 ad4103fa-d940-47ca-8506-301d8071d467
else
search --no-floppy --fs-uuid --set=root ad4103fa-d940-47ca-8506-301d8071d467
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=UUID=ad4103fa-d940-47ca-8506-301d8071d467 ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
It is wrong, the root partition is different than in this, we can see that this grub leads to wrong root partition, i posted my root partition at the bottom from /etc/fstab. I don't know how to fix it - i'm not familiar with the dos names (hd 0,5 and so on).
Here is my /etc/fstab:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sdb2
UUID=59603166-5d8a-4aaf-81f7-5a822fd630e5 / ext4 rw,relatime,data=ordered 0 1
# /dev/sdb1
UUID=20028674-d7e8-4bf4-8551-64f133641962 none swap defaults 0 0
(END)
Last edited by firekage (2013-07-01 06:26:59)

Satellite L50D - Boot issues after Hard Drive replacement

I have just upgraded my hard drive from the pathetic 5400 crod they supply to an SSHD@7200rpm but now have a major issue.
I initially imaged the os from the old hard drive back to the new drive and have had chronic boot issues (1 in 3-4 boot attempts succeed else it fails at any point (often at the Toshiba startup screen)).
I've reinstalled from a plain clean Win 8.1 ENT disc (trying to avoid the bloatware) and this has the exact same issue and was what I used to format the laptop fine with previously and worked previously.
I've tried reformatting and reinstalling (deleting ALL partitions each attempt) in CSM, UEFI non secure and UEFI secure. CSM is a straight never works no go and both UEFI methods have the exact same outcome.
I've tried with the original restore discs and it seems to work (haven't had time to fully test) but I don't want the bloatware and this should not matter since if I were a customer who forgot to make the restore discs (happens too often) and just had to have a failed or killed hard drive replaced the laptop would now be a door stop.
This seems as bad as Apple for locking people in :/.
So I'd appreciate ideas from people please, I'm not sure if there is a prep program that is supposed to be run over a new drive like PS3's etc (I doubt it) but this is driving me up the wall and will be the last time I consider Toshiba as anything other than a joke if there is no fix.
I've had to replace hard drives a few times in my previous Toshiba laptops and had none of this crod, it has something to do with the UEFI which seems more of a nuisance than assistance at the moment.
TIA.

Hi
In my opinion you should check firstly if this booting issue is related to the new installed HDD or new installed system.
You said that the notebook fails to boot often at the Toshiba splash screen.
The splash screen appears while POST (power on self test) procedure. During this test, the hardware will be checked.
Im wondering if the hybrid SSD/HDD isnt recognized by BIOS during this particular step.
From my point of few this might be the reason why the system cannot be booted up.
Another important note:
The Win 8.1 requires enable secure boot as well as the UEFI boot mode.
Therefore you should enable both options in BIOS.
Last but not least check if you are using latest BIOS version as well as latest firmware for hybrid SSD/HDD

Anyone see an ios 7.1.2 boot issue AFTER updating?

From everything I read, I wonder if iOS 7.1.2 has a general boot issue. I have 4 devices, one of which locked on update. When i reset it and checked the crash log, my reset counter was zero and it said there was a boot failure. There was no indication of any application crash for the time in question.
I never reboot any of my devices, so I don't know, but it crossed my mind that perhaps the lockups on boot or booting into recovery mode has nothing to do with the update process, but is related to rebooting 7.1.2 in general. In other words, just because the devices are working fine now, is there still a chance that any of them can lockup or go into recovery mode the next time they are reset?

There appears to be a plethora of similar reports out there (I've been looking around). So we wait for Apple to provide a fix for this problem.
What I am most unhappy about is the inability to downgrade to, at least, the last known working firmware; in this case, 7.1.1. In situations like this, newly introduced problems become a corporate liability, more so on the part of end users that experience limited use of these expensive devices due to these newly-introduced problems. Then, there is the added liability of support calls, feedback/bug reports, etc.
I do not see any logic in the decision to disable downgrading firmware -- in this case, it's seems more paranoia (ie: jailbreak prevention) than a solid engineering decision, in my opnion.

[solved] Boot issues after update caused by LVM

Hi,
I know that there are some threads regarding boot issues but I haven't been able to find a solution for my problem.
I have the following partitions:
$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 74.5G 0 disk
├─sda1 8:1 0 128M 0 part /boot
├─sda2 8:2 0 2G 0 part [SWAP]
└─sda3 8:3 0 72.4G 0 part
├─vg_trinity-root (dm-0) 254:0 0 10G 0 lvm /
└─vg_trinity-home (dm-1) 254:1 0 25G 0 lvm /home
I have
USELVM="yes"
in my rc.conf and the following im mkinitcpio.conf:
HOOKS="base udev autodetect pata scsi sata lvm2 filesystems"
Still, when booting the volume group does not get activated. The following message appears:
:: running hook [lvm2]
Activating logical volumes...
No volume groups found
Waiting 10 seconds for device /dev/mapper/vg_trinity-root ...
ERROR: Unable to find root device '/dev/mapper/vg_trinity-root'.
You are being dropped to a recovery shell
Type 'exit' to try and continue booting
sh: can't access tty: job control turned off
[rootfs /]#
At that point I just run
lvm vgchange -ay
exit the shell and booting continues. So somehow activation of the volume group does not occur early enough. I reinstalled udev, mkinitcpio, linux and generated a new boot image as proposed in https://bbs.archlinux.org/viewtopic.php … 4#p1059124 but to no avail. Is there anything else that might be wrong with my configuration?
Thanks for any help.
mK
Last edited by musiKk (2012-09-09 16:23:17)

My apologies. Usually I'm quite good at searching but this one slipped right past me. Marking as solved (even though the root cause is still WIP).

Boot Issue BIOS won't boot from Disk

Ok, heres my issue. First I was having issue installing Win2k and found I had to disconnect my USB ZIP drive to boot (BIOS Option was disabled)(This is just a note). After installing WIN2k on a WD300BB I was having no issues until I removed my Win2k CDROM disk. At that point the bois (seeing the drive) would not boot (Insert a bootable disk error). To get around this issue I created a bootable nt floppy disk to boot the hard drive.
I also attempted to do a fdisk /mbr with no help. If i put the win2k cdrom into the cdrom drive and have one option to boot from CDROM it will boot from disk. I do NOT hit a key to boot from cdrom. I also cut wire 1 & 2 from IDE cable.
Any other ideas?
Thanks

Thanks for the reply, the IDE cable is cut and there are no jumpers on the drive. This is a bios issue. If I boot from floppy to Win2k, this system works greate. But it will not boot off the hard drive with out assistance.

Nexus7000 Boot issue " Status 90: Loading Boot Loader "

Hi Gents,
I have currently upgraded a NX7k to NX-OS 5.0.2 .
Now I am stuck by rebooting the system (check output below)
No chang after a manual power off and on the System.
Does anybody know how to get out of this boot process ?
Thanks in advanced for your feedback
Saluti
Alibani
<< console output >>
This command will reboot the system. (y/n)? [n] y
2010 Jun 2 09:10:20 FOR110R050_Labor %$ VDC-1 %$ %PLATFORM-2-PFM_SYSTEM_RESET: Manual system restart from Command Line Interface
writing reset reason 9,
Status 90: Loading Boot Loader
Status 90: Loading Boot Loader
Status 90: Loading Boot Loader
Status 90: Loading Boot Loader
Status 90: Loading Boot Loader
Status 90: Loading Boot Loader
Status 90: Loading Boot Loader
Status 90: Loading Boot Loader
Status 90: Loading Boot Loader
Status 90: Loading Boot Loader

Hi Wilhelm,
I have tried your advice and it works, my Nexus come back life again
Thanks mate.
best regards,
Yedi

How to convert Windows 8.1 .exe file to ISO image for installation via Boot Camp?

I have a late 2013 retina display MacBook Pro and want to use Boot Camp to run one piece of software that is run exclusively on Windows operating systems. I have a Windows 8.1 download from MS that is an .exe file, and I need to convert it (I believe) to an ISO image on a flash drive. How do I convert the .exe file to an ISO image?

If you want to use Mac OS X at the same time as Windows, run one of these:
VMWare Fusion
Parallels
Virtual Box (Open Source)
If you are willing to alternate Boot Windows -OR- Mac OS X, all you need is Bootcamp Assistant (and your Windows installer, of course.)
>>NB In any case, do not allow Windows to directly modify the Partition Map or change the size of any Partition. That will wipe out the Partition Map, and Mac OS X. Windows is not a pleasant guest.

Windows 7 Boot Issues (After Installation via Boot Camp)

Similar Messages

Maybe you are looking for