Windows 7 bootcamp drivers not installing properly
Hi All,
I just installed 32 bit Windows 7 Professional on my early 2011 Macbook Pro 2.2ghz i7 and the OS is working fine, but the ethernet controller, bluetooth, facetime camera, network controller, PCI simple communications controller, and SM bus controller all have yellow exclamation points next to them in device manager and are located in a subfolder called "other devices"
I have already installed and reinstalled the boot camp driver pack off of the OSX 10.6 DVD to no avail, as well as trying to install the Marvell Ethernet Controller driver manually, but nothing works.
Any help on this would be much appreciated, I am going crazy trying to figure this out.
Apple has a 3.2 version Driver Update especially for the 2011 MBPs here http://www.apple.com/support/bootcamp/ (right side)
Hope it helps
Stefan
Similar Messages
-
I installed windows 7 on my iMac 21.5 (late 2009) and when I boot windows 7, the lag drivers are missing and bootcamp is not installed. The windows package would not download through bootcamp, even when left alone for 2 hours. Don't have the lion disk... Drivers seem impossible to get. Please help!
lan drivers*
-
Hey so i just bought by 15" MacbooK Pro yesterday and wanted to install windows vista on it. I'm to the part where you're supposed to install windows bootcamp but a message comes up saying that it needs windows 7 in order to install properly. What do i do?? I have the upgrade version of windows 7 (whcih i was going to eventually install) but when i tried installing it an error message came up saying that it needs vista service pack 1 to install. In order to install that service pack I need to connect to the internet. I can't connect to the internet, though, without installing the drivers from bootcamp!! AHH! see how this is frustrating? PLEASE HELP ASAP!
Reboot your computer while holding down the option key. You should be presented with the option to boot into OSX. Once booted into OSX start Boot Camp Assistant and select remove the Boot Camp Partition.
I know Boot Camp Assistant was not installed in Windows. It is an OSX application for creating and removing a Boot Camp partition. It is run from OSX. -
Some of the drivers from the os x disk are not installing properly?
I recently use bootcamp to partition my hard drive. Windows XP installed just fine. I inserted the os x disk like it says to do in the instructions. It told me I needed an updated installer but failed to update. I went into the contents of the CD and began to install the drivers individually. Now some drivers, like the i-sight camera one, did not install properly and im ok with that. But, the ATI drivers, and the Nvidia drivers, the ones I need to play many games (the whole reason I partitioned my hard drive) did not install properly. They installation processes told me that it did not detect the correct drivers for the installation and would now shut down (the nvidia one) and the ATI one failed from almost the beginning but attempted to finish the installation, and failed agian. Any suggestions, ideas, or comments on how I could fix this problem or install these drivers another way would be greatly appreciated!
(sigh) bumb, come on? doesn't anybody have an idea?
-
Why is my itunes not installing properly?
I installed itunes day before yesterday, I spent hours last night linking all my music photograph and movie files, its a new windows 8 laptop.
I plugged in my 64GB ipad 3 rebooted it and reloaded all the information I wanted on it, took hours... finally completed this this morning. After this I restarted the laptop to configure my icloud link for the laptop (which I installed last night while I was loading files, I chose to restart later)
on completion I turned my laptop off for a few hours, when I turned it back on I went to itunes to connect my iphone to do the same and I got this message:
iTunes exe - Entry Point Not Found
The procedure entry point
AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not
be located in dynamiclink library F:\Programmes\iTunes.dll
OK
then after pressing 'OK' the following message:
iTunes
iTunes was not installed correctly. Please reinstall iTunes
Error 7 (Windows error 127)
I went back to apple website to reinstall iTunes, first reinstalled it same again, then unsinstalled it and the reinstalled it, same again.
The same thing happened with my old lap top and I replaced it with this new one at the start of the week.
Has anyone any idea what is going on and how to rectify this problem, I am now going on 3 weeks without iTunes.
Regards,
Damian36I started up and plugged in my iPad and then the following message came up:
iTunes
❗️This iPad cannot be used because the required software is not
Installed. Run the iTunes installer to remove iTunes, then install
the 64-bit version of iTunes.
OK
I then proceeded to the "iTunes64Setup" expanded folder to load "AppleMobileDeviceSupport64"
Started the install and then received this message:
Apple Mobile Device Support
❗️Service 'AppleMobile Device' (Apple Mobile Device)
failed to start. Verify that you have sufficient
Privileges to start system services.
Abort. Retry. Ignore
I tried all tree options, last being ignore.
I continued to download the other 2 you suggested with out any drama.
I did a system restart and then opened iTunes.
Connected my iPad
Then message appears:
iTunes .exe - System Error
❌ The program can't start because CoreAdioToolbox.dll is missing from
Your computer. Try reinstalling the program to fix the problem.
OK
Press OK and then the next message:
iTunes
❌ iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 126)
OK
Any suggestions? -
i downloaded newest itunes version and it would not install properly and now i can't open itunes. i have removed and reinstalled several times. i get error 7 (windows error 126) something about apple mobile device failed to start. what can i do to fix this problem besides restoring system to an earlier date
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
The latest version of iTunes did not install properly on my Windows 7-64bit PC. I am getting the following error message: "Service 'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start system services."
I have tried the following troubleshooting steps without success:
Restart PC
Uninstall iTunes and attempt to reinstall
Verify that I am signed in as an administrator
Download and save iTunes64Setup file, right-click, and run as Administrator
Disable Norton antivirus software
Any suggestions would be greatly appreciated!Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
I tried updating my itune program. Now all I get is the following message "Itunes was not installed properly. Please reinstall itunes. Error 7 (Windows error 126). WHAT can I do to get back to where my itunes program is running again?
I have uninstalled the proram and tried reinstalling and get the same error message. The other error message I get is "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem". I have tried that twice with no luck. Can someone help me get my music back???Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
got notification that new Itunes version is available, once i installed it I'm no longer able to open Itunes, I get the error message, Not installed properly. Reinstall itunes. Error 7(Windows error127), I tried repairing itunes, Apple Aplication support, apple mobile device support, bonjour and I even uninstalled and reinstalled Itunes and still problem exist, any solution?
I have windows 8I got this message today too. I understand that my music is stored on my computer, however I want to be certain that if I re-install iTunes, it won't erase my library....playlists, playcounts, checked songs, etc.
-
While attempting to install the latest iTunes update, version 10.5.3, I encountered an issue. I was forced to download this update manually which, after restarting my Windows 7, did not install properly. How do I get it to install this update?
The installer should have gone into your Apple Software Update folder:
C:\USERS\<user name>\AppData\Local\Apple\Apple Software Update
Right mouse click the msi file and select INSTALL -
iTunes 11.1.4 will not install properly - windows 8.1, 64 bit. The only way I have found to recover is to restore my system. I have unistalled/reintalled iTunes two times. No success. iTunes 11.1.3.8 functions properly (following system restore). When is Apply expected to provide a workable update?
Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I tried to run the new update to iTunes and I got the error....iTunes was not installed properly. Please reinstall iTunes. I have tried that twice with no success. Anyone have any ideas what the problem is?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Has anyone found a solution for the error "The iCloud Control Panel did not install properly". I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar. Cloud control panel version 2.0.
Has anyone found a solution for the error "The iCloud Control Panel did not install properly". I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar. Cloud control panel version 2.0.
-
Windows 7 32 - bit driver is not installed properly
If the driver is not installed properly is 600 Dpi he's found and is not of direct printout of the online scanning is not
Massage is installed when the
Thank you for purchasing HP products. Any previous version of this software found on your computer has been updated with the latest features and support.
Product No. : CB376A
Sr. : [Edited for Personal Information]Thank you for visiting the HP Support Forums. I'm sorry to inform you that your post has needed some editing to remove personal information. From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety.
Thank you
- I worked for HP. -
Provider not installed properly & at times Connection not open
Hi developers,
I am almost very new to Macros VBA. I did much R&D to fetch data from Oracle database to excel sheet. I don't have any oracle software in my machine nor any drivers related to oracle. I request someone to provide me exact oracle required drivers
link to fetch the data. I am running Windows 7 64 bit OS & excel 2010 32 bit.
I am asking proper required drivers again in the question because, I installed 64 bit 10g Release 2 ODAC for Windows Itanium.
http://www.oracle.com/technetwork/database/windows/downloads/index-090165.html
Now, my question is, when I run the below script it throws Provider may not be installed properly or connection not open sometimes. I am confused totally on getting the data from oracle database. I don't know what is TNSNAMES.ORA file also & its location.
Some body please help me, I urge, in completing this fetching task from oracle database.
Sub Button1_Click()
Dim Conn As New ADODB.Connection
Dim RS As New ADODB.Recordset
Dim Cmd As New ADODB.Command
Dim sqlText As String
Dim Row As Long
Dim Findex As Long
Dim Data As Worksheet
Dim X As Long
Dim UID As String
Dim PWD As String
Dim Server As String
Dim strCon As String
Application.Calculation = xlCalculationManual
UID = "myUsername"
PWD = "myPassword"
Server = "myServerName" 'This comes from your TNSNames.ora file
Set Data = Sheets("Sheet2")
Data.Select
Range("A:F").ClearContents 'Change A:F to the range you expect data to return to
Conn.Open "PROVIDER=MSDAORA.Oracle;DATA SOURCE=myServerName;Database=myDatabaseName;UID=myUsername;PWD=myPassword;"
Cmd.ActiveConnection = Conn
Cmd.CommandType = adCmdText
' Put your query next
sqlText = " select * from Oracle_Table_Name "
Cmd.CommandText = sqlText
Set RS = Cmd.Execute
For X = 0 To 17
Data.Cells(1, X + 1) = RS.Fields(X).Name
Next
Do While Not RS.EOF
Row = Row + 1
For Findex = 0 To RS.Fields.Count - 1
Data.Cells(Row + 1, Findex + 1) = RS.Fields(Findex).Value
Next Findex
RS.MoveNext
Loop
Application.Calculation = xlCalculationAutomatic
Application.Calculate
End Sub
I have few cases as below:
1. When Provider name is changed to "PROVIDER=MSDAORA.Oracle" ---> it throws error as
Connection not Open.
2. When Provider name is changed to "Driver={Microsoft ODBC Driver for Oracle}" ---> it throws error as
[Microsoft] [ODBC Driver Manager] Data Source Name Not Found & no default driver specified.
3. When Provider name is changed to "Provider=OraOLEDE.Oracle" ---> it throws error as
Provider cannot be found. It may not be properly installed.
I request to please help me from beginning to start this process. I would be very thankful to you. I am struck. Please help me.
sammyHi;
I have applied the note.
But the system tells me Runtime error! R6034. An application has made an attempt to load the C runtime library incorrectly.
And then again Provider for SQLDMO is not installed properly.
I have installed vcredist_x64.exe ande vcredist_x86.exe. I have installed R3dllinst too.
Could you please advise me again?
Best regards
Noyan
Maybe you are looking for
-
Hello I have a problem where when i try to open my TV shows I got from the Itunes store. They just give me a black screen and the video itself isnt playing while it isnt paused either. I have tried uninstalling and reinstalling, checking for updates,
-
Displaying AR Invoice no in Incoming Payment form
Hi, I want to be able to see AR Invoice No. on the Incoming Payment form at the row level(Document for payment). Can i add a user defined field at the row level and populate this field using a query? If so, how should the query be written. Thanks for
-
Can't open new Lion Mail? - Try delete the file "Envelope index"!
Problem: can't start Mail.app after installing Lion. Mail.app repeatedIy crash when you accept the database upgrade. Possible solution: In Finder use Go to Folder... and type "~/Library/Mail". Delete the index file "Envelope index". Start Mail and it
-
How do I manually put camera raw 8.3 into APE11
Ive tried the dng download but it did nothing in putting the new raw 8.3 into my Photoshop elements 11. How do I do it manually? I cant find anywhere to help. Ive just bought a Canon 70D and now cant read the raw files.
-
i'm not able to create my apple id without my credit card number in my iphone 5c.there is no way to skip this step.there is no option like "NONE" to skip that step.kindly help me out.im unable to download even free apps