Windows 7 can not joinng to domain but windows Xp does in Virtual Box Manager
Dear all,
I need your support and thanks in advance.
I have installed Windows 7 and Windows 2008 server in a Virtual Box. Windows 2008 server is my Domain Controller and DNS is configured. Please find my configuration below.
Domain Controller FQDN name - bbi.in
IP addrees - 192.168.10.14
subnet mask- 255.255.255.0
gateway- 192.168.10.254
Preferred Dns - 192.168.10.14
Windows 7 having IP address 192.168.10.2
Ping connectivity is working from both end
My Problem is my windows 7 machine is not joining to domain.
while doing Nslookup command from windows 7 command prompt I am getting default server and Ip address of the domain controller.
I have been trying a lot and did lots of trouble shooting but can not get any solution plz.... help
On Fri, 14 Nov 2014 17:55:41 +0000, biswajeetpattnaik wrote:
When I join the domain I use bbi and and I get authentication asking for user name and password.
Please find the attached error screen shot<https://social.technet.microsoft.com/Forums/getfile/567235><https://social.technet.microsoft.com/Forums/getfile/567236>
This forum is for issues relating to Windows Server 10 Technical Preview
only, and not for Windows Server 2008, Windows 7 nor Windows XP. Please
post your question a forum that is for the correct topic.
Paul Adare - FIM CM MVP
All that blue light from Orthanc at night? That was
Saruman, trying to moderate
-- news.admin.palantir-abuse.sightings.
Similar Messages
-
Can not find air printer,but friends iPhone does?
CChange my wifi to shaw and now my ipad and iPhone do not find my air printer, but my friends iPhone does? ***?
Yep, here you go
http://support.apple.com/kb/ht4356 -
I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem
i try to download now, do you think when i download and install the windows support software, can i fix the problem?
-
Can not reboot into OSX from Windows using Bootcamp assistant
I'm having a bit of a problem with rebooting into OSX from Windows on bootcamp. Clicking on the icon in the system tray produces a message that Windows can not find the OSX disk. Trying to open the Bootcamp preferences also generates an error. I have no problem getting back into OSX if I shut down Windows and restart the MacPro while holding down the option key. This is with a Windows 7 install on Bootcamp, but I had the same issue with a previous install of Win XP. I nuked and paved OSX and the WIndows disk between installs so my current problem is not carry over from the XP install.
My bad I should have been more clear. The problem is actually with a XP install via bootcamp, my Win 7 install is in VM Ware Fusion.
The XP install is on a second drive. Since you asked about this I'm assuming it may be the reason Im having problems.
The error is I get when trying to access bootcamp via the Windows control panel or by right clicking the sys tray icon is - "An error occured while trying to access the start up disk settings. You may not have privileges ...blah, blah, blah. I only created one account and I have enough privliges to change admin stuff in windows so I cant see privliges being the issue. I reassigned the OSX partition a new drive letter and rebooted windows but this didn't help.
The only drivers I installed, other then updating the video driver, are the bootcamp drivers
Sys tray icon - small diamond shapped icon in systray for accessing bootcamp functions. -
Windows can not manage to have different DPI 1080p and 4K monitor
Windows can not manage to have different DPI 1080p and 4K screen. However, it is impossible not to have a magnification of 1080p but 25-35% on Dell 4K (P2715Q) intimidate. Windows 8.1 increases on both screens. I have clicked out that it will not change
on both screens, and only on 4K Dell P2715Q.
I have Nvidia GTX 680 and latest drivers 347.88! Windows is 8.1 Pro with Mediacenter.Hi,
Agree with you, quote from “Windows 8.1 DPI Scaling Enhancements” Windows blog.
“here have been some questions about when per-display DPI scaling is used (different DPI scaling values per display) and I wanted to add a note here to clarify. On Windows 8.1 when you have the “Let me choose one scaling level for all
my displays” check box checked (not checked by default) one uniform DPI scaling value is used for all displays.”
http://blogs.windows.com/bloggingwindows/2013/07/15/windows-8-1-dpi-scaling-enhancements/
Regards,
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
i was installing windows 8 on mac by boot camp and after i put the windows code and choose the partition i formatted the boot camp sector it said windows can not install on this sector because it is gpt
Reinstalling Mavericks depends on several factors:
if you erased your recovery partition
what OS originally came on your Mac.
I'll assume you don't have a backup available that you made before your mishap, because you didn't mention it.
That's really the take home message here: have a backup!
If you still have your recovery partition:
boot into the recovery partition (command R at restart)
use the recovery partition to reinstall Mavericks. see: OS X: About OS X Recovery
if you do not still have your recovery partition, then it depends on whether your Mac originally came with installer disks or not.
If it originally came with installer disks, you would boot from the installer disks, erase your HD, and then reinstall the OS that is on the installer disks, and then upgrade as necessary until you get to Mavericks.
If your mac did not originally come with installer disks, but you managed to erase your recovery partition, then you can try to boot into internet recovery (option-command-R at restart), and use internet recovery to erase your HD and reinstall the OS that originally came with your computer, and then upgrade to Mavericks if you need to. See: Hands on with Mountain Lion's OS X Recovery and Internet Recovery | Macworld
(the reference refers to ML but it applies just as well to Mavericks). -
Windows can not adjust the brightness on this display
I have a Toshiba Satellite LX835-D3300 ( Serial #ZC119804Q )
I want to brighten my display, but it tells me..... Windows can not adjust the brightness on this display.
In my HELP section on my computer it tells me to...
Tap or click PC and devices, then tap or click Display
Make sure the Adjust my screen brightness automatically slider is turned on
Get the best display on your monitor - Microsoft Windows Help
(If you don't want the screen brightness to change automatically, tap or click the Adjust my screen brightness automatically slider to turn it off.)
Tap or click Apply.
I do not have that.
I notice that if I go to the side of my screen and then click on Devices, click on projects... "Second Screen" is showning
I clicked on it and then I went and clicked on PC screen only and it is highlighted, but when I go back to it, it stills shows "Second Sreen"
Please help me. What am I doing wrongAll-in-One LX835-D3300
Downloads here.
Have you upgraded to Windows 8.1? If so, did you follow these instructions?
How to Update from Windows 8 to Windows 8.1
-Jerry -
Touchsmart IQ524 hard drive crashed. Ran Recovery CDs and I get an error Windows can not install on
I have an HP Touchsmart IQ524 which the hard drive crashed. I replaced the hard drive with the exact same model. I run the Recovery CDs (which I purchased from HP website) and it goes all the way through the process and after the reboot I get a message that "Windows can not install software on this hardware" - so it never completes the process. I have formatted the hard drive and bought and returned 3 hard drives. Any suggestions and assistance will be greatly appreciated.
Hi:
I love recovery disks when they work, and HATE them when they don't.
Fortunately, I have a workaround for you which isn't as good as a recovery disk, but it is better than pulling your hair out, and getting nowhere.
First of all, before you try this, did you perform the recovery with only the keyboard and mouse connected?
Did you buy the same size or larger hard drive?
If your answer to either question is no, then that may be the problem.
Now to the workaround...
If you're up to a slight but rewarding challenge you can make your own if you can read your 25 character Vista product key on the PC.
Just download the 3 files you need at the link below, and read all of the instructions to create a bootable DVD installation disk using imageburn.
Disregard the part of the text under the first screen shot about "extract the files to the Vista folder."
The files were already extracted to that folder when you ran the X14.exe file by reading the text on top of the first screen shot.
The other thing I noticed is on the 4th screen shot, where it shows Developer ID Microsoft Corporation. I had to type Microsoft Corporation in myself, and then the other codes automatically populated.
When I went to compile the ISO file, ImageBurn gave a message that about a WIM file and ISO, and if I wanted to burn it in a different format.
I selected No, make the ISO file.
It was not that hard to do. I burned both the 64 bit disk and the 32 bit disk in case I ever need them.
I tested both of them on my hp dc7100 CMT desktop PC, they worked perfectly.
When you enter the product key, it knows what version of Vista you have.
http://en.community.dell.com/support-forums/software-os/w/microsoft_os/3317.2-3-microsoft-windows-v....
After you successfully install Vista, you can then install the drivers from your PC's support and driver page.
Paul -
W530 Can not see SSD (Bios or Windows Installation)
Hi all,
I have been workign on this for a bit now and can't see mto get it figured out. I referenced past threads on this forum for help, but so far no luck.
Basically I am tryign to install a new Samsung SSD into a W530, however, I can not get the Bios or Windows instalation to see it (when you select what driev you want to install windows on).
I can externally attach the SSD to my other laptop and see the drive. I can create partitions, format them, etc. But none of that helped my original issue.
I have also updated to the latest BIOS version, tried turning off UEFI, no luck.
Any ideas on what I am missign here to get this SSD to show up?
Thanks,
Jeryn
Solved!
Go to Solution.Are you replacing the spinner in your W530 with the SSD? Main drive bay?
The side rails from the old spinner must be removed from the old drive and attached to the sides of the SSD, before putting it into the bay. However as is shown in the user manual, they actually must be attached "upside down" (or maybe inside out as well?? I forget now) for the SSD from the orientation that they had with the spinner. I assume this is because of a slight height difference in the two drives as far as where the rear electrical connector on the drive mates with the correnspinding connector inside the bay.
The reversal of the side rails will raise (or lower?) the SSD drive, so that its electrical connector meets the drive bay electrical connector properly. Now when you push in the SSD drive all the way, you're really making true electrical contact and presumably the SSD will now be seen.
With the side rails attached incorrectly, when you push the SSD all the way in, the drive electrical connector is completely missing the drive bay connector, and there is zero electrical contact. It's just sitting in the drive bay physcially.
I made this same mistake myself when installing my Samsung 840 Pro SSD to replace the factory 500GB spinner in my own W530. Played with this for an hour, before finally interpreting the picture from the user manual as an indication there were two different orientations of the side rails that were actually different, for spinner vs. SSD, and exactly what that meant in terms of attaching the rails to the drive before inserting it into the main bay. -
Using WindowsXP, and e-mail via Yahoo,browser is Firefox 4.0.I get the following error message when accessing yahoo mail site:"http://us.f831.mail.yahoo.com/dc/launch?action=welcome&yy=1782408664&.rand=0qrsdp1o...Windows can not find(the above address is inserted here).make sure you typed the name correctly,and try again". After this message is displayed on my desktop it begins to fade,and the inbox of my yahoo mail is then displayed..I am able to work all functions of the mail without problems.( I might add at this point that i access the mail program via a desktop icon).When I close out of the program the error message box with the error described above is displayed again on my desktop.I must click on the "X" to remove it.I can access my yahoo mail via Internet Explorer with no problem,as well as accessing via my yahoo home page.
Here's an image of the ERROR Message. I'm not sure how this forum works -- if this image is an attachment or if it shows up in the body of this reply.
Here goes... -
Can not open new blank tab window from file, new tab.In Tools/Options/Tabs I have ticked open new window in new tab?
The Ask Toolbar is probably causing that in the Firefox 3.6.13 version. Disable that extension or un-install it.
-
I installed new version 4. Whenever I double click on any htm or html document it will not open with firefox it gives a message window saying "Windows can not file path please type correctly" (not extact these words) .. It was working when old firefox was there..
Phillipp,
I tried it again using "save link as", and this time it actually worked! I just now downloaded several more using the "save link as" option, and it works perfectly. Thanks. Problem solved.
Littleberry -
HP Pavilion dv7 6b57nr windows can not continue
after system recovery with hp recovery disc windows will not load completely After setup for first use the wecome screen loads to the point of says welcome then windows can not continute comes on.
HP Pavilion dv7 6b57nr windows 7You can get some of the original software & drivers from your Support page HERE
If the copy of Windows you have is already activated on another machine you may need to install the version that matches your license key attached to bottom of laptop.
If you can read the 25 character Microsoft Windows 7 license key attached to your laptop ,download a Windows 7 ISO file to burn to a DVD for the version that is listed on the Microsoft COA sticker.
Link to the W7 ISO file downloads:
http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
Get ImgBurn to burn the iso image to cd
Or use the Windows 7 USB/DVD installation tool to convert the ISO file to a Windows installation on DVD or USB flash drive.
http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool
Use the 25 character product key on the PC to activate the installation.
Next go to your support and driver page to install the drivers you need.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
Windows can not find ' FILE ': error.
I have downloaded and installed the production version of SQL Developer. (1.0.0.14.67)
Windows XP SP 2.
When I started it for the first time I checked all the file association check boxes.
If I double click on a .sql file the following windows error occurs:
Windows can not find '<file>'. Make sure you typed the name correctly, and then try again. To Search for a file, click the Start button, and then click search.
SQL Developer does startup. The error message is closed when the OK button is selected.
Any Ideas?
Regards;
RobertHi Robert,
Just to confirm, SQL Developer does actually open the file. The only issue is the error message displayed. I have logged a bug for that.
There is a work around until that is sorted. If you use explorer to associate the file types with SQL Developer, they open without this error.
Regards
Sue -
Window can not find a system image on this computer
I have HPPavilion dv6 3134se notebook.when I purchased.its operating system was windows 7 home basic.My friend suggest me to upgrade windows 7 ultimate.he also give dvd of windows 7.i have installed it.after3days a message appear from microsoft.that your copy is not original.ITry to get my previous windows 7 home basic.when i press F 11&force to recovery amessage apear tahat window can not find a system image on this computer.I try to my level find it a message appear.thatspecify the location of the system image.How search system image on the network pleasehelp me with url address&my hp recovery partion also now not loki ngcomputer.i hope some one help me.
This question was solved.
View Solution.Hi,
You're welcome, glad it helped
All the best,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience
Maybe you are looking for
-
Hi all, I'm a newbie in ABAP and I'm working on open sql. I've tried to write a simple program about deleting a record in a table: LFA1 After execution I was surprised about result: it works! But LFA1 has references on LFB1, LFBK, and so I have an in
-
Change purchasing output control (from sapscript to smartform) Qusetion!
I want to print a Purchasing Documents by smartform.So i look for system standard program "SAPFM06P"->FORM ENTRY_NEU. In this form i found 2 function:'ME_READ_PO_FOR_PRINTING' and 'ME_PRINT_PO'. who can tell me the useful of function?(is it standard
-
Hi, Our customer is using MQ. How can we make the JMS adapter work with it? Thanks,
-
I have 30 gb of audio 14 gb video and 33gb of other what is other and how do i get rid if it.
i have 30GB of audio 14GB video and 33GB of other.... how do i get rid of the other?
-
I have the iphone 3gs ios 4.2.1. It is not allowing me to update. I use Itunes to check for an update and it says I am up to date. I know I am not up to date because my friend with the same phone updated to ios 6. Please tell me what to do this gives