Windows 7 can't stay connected to time capsule

I can see the TC in my Windows explorer but as soon as I access the TC and try to navigate through the folder structure in order to reach a file it keeps losing connection and I fall back/up a level in the folder structure until it cuts the connection entirely and I have to start over at the root. It's practically impossible to get files off the TC this way and I can't copy anything onto the TC. This did not happen when I was running Vista.
Anyone with a solution?

I have the same problem. Every startup it asks me the sistem password (not the disk pw, i do not set it)and the copy/paste breaks after few seconds.
If i copy a file, no problem, if i copy a folder, any file goes in.
My configuration is:
wi.fi connection, no ethernet, TC connected to the existing wi.fi. Any problem with iMac and Mini.

Similar Messages

Devices (iPad, iPhone) no longer can maintain wifi connectivity with time capsule

My iPad and iPhone can no longer maintain wifi connectivity with time capsule. Time capsule has connectivity to internet via Macbook, but not other devices. This started after upgrade of devices to s/w 6.0. Does anyone know if that could impact connectivity?

Yes, this is often reported with iOS 6.. there are definitely more wireless problems.
I recommend you reset the TC in the following ways.
1. Change all names to SMB type.. ie short, no spaces and pure alphanumeric.. that includes the TC itself, wireless and hard disk. I recommend a different name for 5ghz so you can force clients to that band without auto voodoo affecting it.
2. Use WPA2 Personal security only.. 8-12 character pure alphanumeric passkey.
3. Lock the wireless channels.. particularly for 2.4ghz.. pick one of the channels, out of 1, 6, 11 as these are the only ones that do not overlap.. test each in turn for the best and most stable. TC should pick the best itself but that is voodoo and I am preferring to run the system without black arts.

Powerbook G4 can no longer connect to Time Capsule network

For more than a year, my Powerbook G4 17" was able to access the internet provided wirelessly via my Time Capsule. I recently had to reconfigure the Time Capsule setup to address an unrelated issue, and now I am unable to join the wireless network at all from the Powerbook. I would guess that I inadvertantly changed something about the setup of the Time Capsule, but I can't figure out what. All other wireless devices (iMac, Apple TV, iPad) in the house are able to connect without problem, so I know that it is at least not a password issue. Eventhough I enter the correct password for the network on the G4, I only get a "connection timeout" error.
Any suggestions as to what I might try to get connected again?

I presume you are on Mountain Lion.. it does have some network issues..
Try just rebooting.. and restart everything in the correct order..
Modem.. router/TC.. USB drive.. clients.. 2min gap between each.
If you still have issues do a verify of the drive.
See A5 http://pondini.org/TM/Troubleshooting.html

Migration assistant can't make connection to time capsule

I have new mbp and new 2tb time capsule....have connection made with ethernet at time capsule to mbp with thunderbolt adapter
migrating old imac to mbp.....the tme capsule icon shows up in the migration assistant screen..but "looking for other sources" is all it has been doing for 15 minutes....
what am I doing wrong?

I don't think it would do that, but you can help it find its way.
Inherit a Backup
Inherit a Backup (2)

How do I connect to Time Capsule from a Windows 8.1 machine which is on a Windows domain. I have been able to connect from a Windows 7 machine on a Windows domain to a Time Capsule. Airport utility is not displaying the Time Capsule Win8.1 machine

How do I connect to Time Capsule from a Windows 8.1 machine which is on a Windows domain. I have been able to connect from a Windows 7 machine on a Windows domain to a Time Capsule. Airport utility is not displaying the Time Capsule Win8.1 machine.
I have checked that the firmware has been updated to 7.6.4 . Similalrly the Win8.1 machine has been loaded with the update specified in another discussion.

Firstly how are you connecting to the TC.. wireless or ethernet?
Please open a command window and ping it.. ping by name and by IP address.
If ping succeeds at least by IP it should work.
In windows explorer type
\\10.0.1.1 (or whatever the TC ip is.. that is the default).
Having the airport utility for windows loaded can help the process. As it loads bonjour for windows.
7.6.4 firmware on the TC is useless. It works better on 7.6.1
If the ping does not succeed by either name or IP address yet you have internet through the TC, then your network is setup wrongly. You are have firewalls blocking local IP. Take down all the firewalls.

Windows user can no longer connect to my File Sharing IP address

Hello,
Since updating to OS X 10.4.9, Windows users can no longer connect to my file sharing IP address.
I have had no problems when I was using 10.4.8, and I have re-checked both the Windows computer and my Mac to make sure that the file sharing connection should be possible.
I think this may be some sort of firewall / security issue (?) in that the 10.4.9 update has downloaded something which now "hides" my Mac at this IP address. I am unsure how to resolve this problem.
Does anyone have a suggestion? Much obliged, in advance.

Can the Mac connect to the PC?
Have you checked the Workgroup is the same on the Mac
in Directory Access>CIS/SMB?
Have you tried turning off the Firewall for a test?
Has the IP changed?
Hello!
Thank you for the suggestive questions above. I haven't "tested" any of them because I simply became exasperated with the "change" in 10.4.9 and went back to system 10.4.8
Of course, now everything is right with the world and I can once again have my Windows computer connect to my Mac.
Thank you for taking the time in trying to help me -- much obliged.

I just had Uverse installed. The iMac which was my base station is now connected via my household electric ground connection. Another computer is now the base station. I have connected my Time Capsule to my computer by USB cable, but can't set it up

I just had Uverse installed. My iMac desktop has been the base station for my wi fi, but we had to connect it via ground wire of my electrical system and use another desktop as the base station [with windows op system]. We have connected my Time Capsule to the computer via USB cable. I believe that will require setting up the Capsule to use Ethernet, but the instructiions on the install disc only talk about using Airport. How can I find instructions for setting up using USB cable and Ethernet?
Thanks!
Charles Leach

All the manuals are listed at the head of the thread.
https://discussions.apple.com/community/wireless/time_capsule?view=overview
The TC cannot connect to the computer by USB.. it is network device.. it only connects by ethernet or wireless.. usb is for external drive or printer.

I have a macbook pro and use BT homehub 3. can't work out how to connect my time capsule. can anyone help, thanks.

I have a macbook pro and use BT homehub 3. can't work out how to connect my time capsule. can anyone help? thanks

Just need to plug the TC in to the hub in bridge mode.. do not try and bridge the homehub.. it is not possible with the setup BT uses.
To bridge the TC.. plug it directly into a computer by ethernet.. no other connection to the TC or the computer.
Press and hold in reset until the front LED flashes rapidly.. about 10sec.
Release the reset.
Open the airport utility and setup the TC to bridge mode.
The actual method depends on version of the OS and airport utility you use.
This is version 5.
Sorry I cannot post the v6 as I am on a snow leopard computer now. But you go to the network tab, and choose off bridge mode for method of connection. It will be NAT and dhcp by default.
Then setup wireless.. you have a number of choices here.
Either setup with the same SSID Security and password, as the homehub uses.. or a different name, and password..
Each method works fine.. but you sometimes have issues with wireless channels.. for now leave it on auto and see what happens.. if you have issues lock down the radio channels on both devices.. use one out of the following on each, 1, 6, 11 or 13 in UK.. so say 6 on the homehub then 13 onthe TC.
Update the TC.. unplug fromt the computer and plug it into the homehub.
If you have other issues with the setup tell us what OS you run so we can post suitable screenshots.

Can I connect my Time Capsule wired to the computer and just use it as a back up

Can I connect my Time Capsule to my computer (wired) and just use it as a back up and not as a wireless router?

Yes, you simply bridge the TC..
Just google for it as we have posted the instructions endlessly.
The one trick that might be necessary is to ensure the TC is on a different IP range to the main broadband connection.
And make sure the gateway and dns do not cause issues.. so it is generally better to set static ip on the TC and the computer.
None of it is hard so ask for specific instructions if you get to the point.

Can i connect my time capsule to my hdtv for use as an extra display for my mac book pro?

I want to use my hdtv as a display wirelessly. Can one connect their time capsule to the tv?

1. Can my TC handle "dual band" wifi or not? As it's 3 years old, I'm not sure the spec is sufficient.
They have been dual band since gen2.. yours is gen4 or at worst gen3.
2. Is the TC likely to provide better performance than the BT Home Hub router, as the Apple store suggest?
Impossible to say.. but easy to test.. simply plug the TC into the BT router in bridge mode and use it with setup to create a wireless network.. that is the way I would suggest anyway.
3. Will the BT wifi extender still work if the TC is the main router? BT aren't sure, hence asking here. "Trial and error" will take hours and because of the wifi issues in my house, can be frustrating.
Sorry this is out of my perview.. I can suggest it will be poor.. apple do not use standard settings for extend wireless.. and if it is universal repeater they also behave poorly.. Have you thought of using EOP adapters.. very popular in the UK and tend to work much better than wireless.
4. Would the BT wifi extender communciate with the TC or the BT Home Hub router?
As suggested above.. leave the BT as the main router and plug the TC bridged into it.. you can then use both..
simply set the wireless names different and keep the channels apart.
For 2.4ghz there are only 3 non-overlapping channels.. 1, 6, 11 or 13 as alternative in UK.
For 5ghz there are lots more but the lower channels work better.. so 36-48 depending on regs in the UK.

Can't print wirelessly via time capsule on a windows 7 computer

I have an epson rx580 printer that when attached to my time capsule, I can print wirelessly with no problem on my Imac however I can't get my Sony / windows 7 laptop to print properly via the time capsule... I have installed bonjour on the laptop and setup the printer with bonjour however the printer will print about a half a page and stop and get stuck until I turn it off.. I have downloaded all the latest windows drivers and the firmware to the time capsule is up to date. Does anybody have any experience with getting windows 7 to print properly on a time capsule?

Have you plugged the printer directly into the win7 laptop and tried to print, using the current drivers. Is that successful?
If the job is failing half way through, make sure the permissions are correct on everything and make sure you turn on guest access on the TC.
Other than that, sorry I don't really know what is going wrong. Sometimes the issue is two way communications is failing. Try plugging the laptop into the TC with ethernet.

As a Verizon FIOS client, can we just use Ethernet cable to connect to time capsule, or do we need their router to connect to the time capsule?

As a Verizon FIOS client, can we just use Ethernet cable to connect to time capsule or do we need the Verizon router to connect to time capsule?

The Time Capsule is indeed a wireless router with simultaneous dual band capability...and a hard drive for backup purposes. You can use that to your advantage if you configure the Time Capsule as I suggested in Bridge Mode.
The Time Capsule will provide a 802.11n 5 GHz band and a 802.11n/g/b compatible 2.4 GHz band to allow virtually any device to connect to the network.
I suppose that you could also use the "g" wireless network provided by the Verizon router as a "guest" network or something similar if you really do need another wireless network.
It might be possible to configure the Time Capsule as the main router on the network....that's a question for Verizon. But even if you might be able to do this, I'm sure it is not supported by Verizon, so you would be on your own in the event of any Internet connection difficulties on your service.
And, since the Time Capsule does not have a built in modem....you would still need to add a separate modem to the installation anyway.
That's why my suggestion is to use the Verizon device as the "modem" and let the Time Capsule provide the dual band wireless network and of course, handle the Time Machine backups.

Can I increase the capacity of Time Machine with an external hard drive connected to Time Capsule?

Can I increase the capacity of Time Machine with an external hard drive connected to Time Capsule via the USB port? My current Time Machine has a total capacity of 1TB. I'd like to double or triple its memory. I don't want to use the external hard drive in lieu of the Time Capsule hard drive. I'd like to use it in addition to. Just don't know if/how it's possible.
This is another one of those questions that I've searched the web for answers, and have gotten tricky answers back. So now I'm trying to introduce a clean slate to the mix.
Thank you for your time!

Well, what you mentioning is possible. However, I don't know whether it's supported (as in, "easy to set up."). Time Machine officially supports backing up to a locally attached drive, to a machine running a Time Machine server (i.e. running OS X Server software), and to a Time Capsule. I don't know that it officially supports a drive attached to an AirPort or to a Time Capsule. Though I know some people have gotten it to work.
Best I can say is to try it. Plug the drive into the Time Capsule, ensure it's shared on the network, and then try and set it as a backup target from a machine in the Time Machine backup panel (you'll need to ensure it's mounted first). If it works, you're all set.

MacBook Pro can't connect to Time Capsule or network drives

I have a MacBook Pro (2.2 GHz, Intel i7, 4 GB RAM) and for some reason it can not connect to either the Time Capsule or any network drives. We were recently out of town on vacation and before the vacation, everything worked fine. Now, that we are back, the MacBook will connect to the wireless network and can access the internet, etc but it can not access either the Time Capsule or any drives I have setup as shared that's connected to the iMac. I go to the Network and it doesn't show anything as available to connect to.
I have restarted both the MacBook and the iMac and even turned off and back on file sharing on the iMac. I have even restarted the Time Capsule but nothing is working. Both the MacBook Pro and iMac are running Lion (10.7.2). All have the latest updates, etc. Also the Time Capsule has all of the latest firmware updates. Again, this was working fine last week. Now this week, nothing.
Can someone please help? I use the Time Capsule for backups and the network drive for iTunes. Without those, the MacBook Pro is missing a lot of functionality.
Bronson

It might help to reset the connection settings on your Mac using these steps one at a time until the problem is resolved, recognizing that, depending on your problem, not all of these steps will make sense:
1) Use the AirPort menu bar item to turn AirPort off, then on again.
2) Try to select your Wi-Fi network from the AirPort menu.
3) In the Network panel of System Preferences delete the AirPort item from the left column, then add it back.
4) In the same panel as (3), define a new location and see if you can make that work.
5) In the same panel, select the AirPort connection item, click the "Advanced" button, select the "TCP/IP" tab, then click "Renew DHCP Lease".
6) In the folder /Library/Preferences ( _not_ <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.
These steps may not help, but they'll only take a couple of minutes to try. Before you try these, if you have any special network settings on your Mac for things like DSL credentials, note all your network settings, because the latter steps will destroy them. If you got all the way to the last step, if things don't work any worse than before, you can trash the saved SystemConfiguration folder.

HT1178 can i connect the time capsule to a router?

i am having problems setting up the time capsule for the first time. it works when i connect the time capsule to my mac via ethernet cable. however, i am trying to have it connect to my mac wirelessly. so i pluget it into my router through the wan port, but it flashes yellow.

Flashing amber can mean anything .. it is just an error which you need to find in the airport utility the exact description.
But I recommend reconnect by ethernet first.
Setup wireless again.. this time use new name.. short, no spaces pure alphanumeric.. TC24ghz for example.. and different name for 5ghz.. TC5ghz works.
Lock the wireless channels used particularly for 2.4ghz.. choose out of 1, 6, 11.
Setup WPA2 Personal security with 8-12 character passkey.. pure alphanumeric.
Update the TC, and disconnect the ethernet.. but do not move it yet.. with the Mac close by try to connect to the wireless.. if it still fails.. something is wrong in the hardware on one side or the other.
If you get wireless working, determine if the router or modem you plug into is going to be the main router.. in which case bridge the TC. Or if the TC will be the main router.. setup the TC to connect by dhcp or pppoe depending on the broadband type.

Windows 7 can't stay connected to time capsule

Similar Messages

Maybe you are looking for