Windows 7 can use Graphic Equalizer? (Audigy Value)
Hi, i'm new user?
now i use sound blaster audigy value but driver in cd driver not support windows 7 (Bluescreen)
and i want to use graphic equalizer, please help me?
Message Edited by materialise on 03-28-2009 05:03 [email protected]
Maybe you have installed all this stuff in wrong installations order. I have installed Win7 32 bit on friends Satellite A500 following this installations order:
-Win7
-chipset driver
-storage manager
-display driver
-sound driver
-modem driver
-supervisor utility
-infrared
-patches
-configfree
-VAP
-toshiba hardware setup
-HDMI control
-WLAN driver
Added Vista stuff:
-Toshiba assist - work properly
-Card reader - installed properly
-Webcam driver for A500 - tested with Skype - works properly.
-Synaptics driver
Everything works perfectly including hardware setup. I don't know maybe you should install Win7 again following this installations order.
By the way: hardware setup was shown in control panel in WXP but since Vista not anymore. So I asked you this question because I know for sure it is not in control panel anymore.
Since Vista Toshiba packed all tools and utilities overview in Toshiba Assist.
Similar Messages
-
Windows Vista vs. Sound Blaster Audigy Value = Problem
I am facing problems with SoundBlaster Audigy Value when using it with Windows Vista. However i have downloaded and installed latest drivers (Version No. - SB24_VTDRV_LB__04_0077) supporting this card but still it is functioning as good as it worked with windows XP .
Prob # : I can hear sound from my TV Tuner device but cannot perform recording , an error ("Cannot render audio capture system") is generated whenever i try to do so. I also tried to set recording control of my Tv Tuner device to sound card's "line in" parameter as i used to do in XP but in Vista my device shows nothing. Why ?
Prob # 2: Can you tell me where I can find "creative graphic equalizer" for this card which supports windows Vista or please provide a link to download it's
Prob # 3: Why we cannot enable "Bass Boost" using new Creative Audio Console while using Creative Inspire 4400 (4. Channel Speakers) like i used to do in windows XP ?
I will be extremely thankful to you if you please provide a solution to these problems.
Thank You........altho i tried this with audigy se u might wanna check this
http://forums.creative.com/creativelabs/board/message?board.id=Vista&message.id=7665#M7665 -
Optimal Settings using Graphic Equalizer
Hey everybody, I'm on a laptop computer (A Dell XPS M70) with surround speakers (two on the front, two on top next to the keyboard, and a subwoofer). The speakers sound okay, but I was wondering if anyone had optimal settings for the graphics equalizer to make the sound clearer and with greater bass definition. Please post either a screenshot of the settings, or just state what setting you have each slider of the Graphics Equalizer on. Thanks a lot!
Actually Hick he's right and your wrong, LOL. I decided to take a look at Dells site and his laptop does have an intergrated sub.
<SPAN><B>Standard:</B>
<SPAN>High definition integrated stereo sound with Integrated subwoofer.
<SPAN>Stereo 2 watt per channel main speakers and 5 watt, class D subwoofer with bass reflex port
Don't take my word for it tho, here's a link http://www.dell.com/content/products...n=specs#tabtop -
How make an appear windows for the use and enter one value?
Hi everybody,
I posted already once but my post has disappeared.
I am new in programming with labview.
I am doing an intern ship in a company and I would like to Improve an existing software.
The purpose of the software is to a syringe pump manages to fill a nozzle (connected to
an atomizer) and After spraying has pricise Amount on flies.
So, first, the software Was Divided in to share. I made folders to put in one.
-> Until this, it works
Now I would like to make a program executive for purpose That I-have to, first, find a solution
to control the syringe pump. I explain my self: When I am running the software, the syringe
pump start to run by himself and the User has not the time to enter some values. For safe, I tried
put a button to start the problem Is That goal block the software Spraying Because it s use as a
SubVI. So My idea: I would like to bring-up has windows, Where the user can enter all His gains
push a button and OK to run the software.
If someone HAS an idea Will it really help me !!
Have a good day
AnaisSounds like you are just looking for a simple dialog box with some fields for the user to enter the required parameters. There are lots of examples if you look around, but here is a quick simple one. The three values enterd are bundled into a cluster for convenience, and it includes a 'cancelled' output in case the user changes his mind.
-
Balancing Segement Value set we can use it as Intercompany value set?
Hi Gurus,
We have requirement as follow.
We have company values "001, 002, 003" which is balancing segment values
we need to use the same Values for Intercompany transactions, can i use company value set as Intercompany or not.
1) If yes do we need to create Values for intercompany one more time or values will be default from company
2) If not please tell me exact reason and how to setup Dependent segement.
Hi waiting for your reply
Edited by: prasanthbabu on Mar 15, 2010 2:39 AMHello,
The same value set can be used for Intercompany but it is recommended to use a separate value set for the Intercompany if ever (in the future) u need to add additional information regarding the Intercompany value.
Having a value set only for Intercompany, you can add DFF on it.
Hope this helps..
Vik -
Is there a script for Windows I can use to make iTunes read CD text?
I've looked all over and all I cannot seem to find one that works for Windows, only Apple. Thanks!
Yes, but you can always try customized skins from this site: http://itunes-skins.com/ .
-
Anyone know if Windows NPS can use AES Key Wrap?
I cannot fiond the info anywhere on NPS server, i need to enable
Use AES Key Wrap
(Designed for FIPS customers and requires a key wrap compliant RADIUS server)
But have no idea if the NPS server supports it, and don't want to kill all my existing user's that are on atm.
And if it does not support it, anyone know of a Radius server that does, im guessing the cisco one doesNo... I tested this out before and it only is supported in ACS.
Sent from Cisco Technical Support iPhone App -
Can i use graphical mapping to do such conversion or do i need java mapping
Hi Folks,
Need all your help and experience in solving this .
Can you let me know is it possible do to such kind of conversion in XI using file adapter or do I need to do java mapping
Say from rom database I get data in this format
Seq Field Name Field Value
1 Cust No Cust 1
1 S SS1
1 Score1 10
1 Score 2 12
2 Cust No Cust 2
2 S SS2
2 Score1 5
2 Score 2 10
Based on this my o/p has to be
Cust 1 SS1 10 12
Cust 2 SS2 5 10
( ie values in the last column )
The number of rows returned from database can vary . like here for 1 seq it gives 4 in the example bt it can be any number
Like
Seq Field Name Field Value
1 Cust No Cust 1
1 S SS1
1 Score1 10
1 Score 2 12
1 Score3 15
2 Cust No Cust 2
2 S SS2
2 Score1 5
2 Score 2 10
2 Score3 25
Based on this my o/p has to be
Cust 1 SS1 10 12 15
Cust 2 SS2 5 10 25
is there any way that we can use graphical mapping plus file content conversion to do this or is java based mapping the only solution
Thanks
amitHi Amit,
You can do this using Graphical mapping and File Content Conversion.You concatenate the necessary fields in a Context and assign it to the the field Data(or field name of your wish )) in the target which will of the structure
<Records>
<Record>
<Data>concatenated value</Data>
</Record>
</Records>
and in File Content Conversion
make Records,Record 0:1 and Data as 0:unbounded
and give Recordset Structure as Record
then Record.fieldSeparator as 'nl'
This will give you desired output
Regards,
Sundar -
Can you use Graphics Processor? What is your GPU?
Please answer if you can use graphics processor on Lightroom CC and which is your computer config, if possible.
I have a Radeon HD 6870 running with windows 7 64bits and I can't use graphics processor.
Thank you.My Lightroom 6 installation initially wasn't using the GPU:
Operating System: Windows 8.1 Pro, 64-bit
DirectX version: 11.0
GPU processor: GeForce GTX 745
Driver version: 335.58
LR6:
Graphics Processor Info:
Check OpenGL support: Failed
Vendor: NVIDIA Corporation
Version: 3.3.0
Renderer: GeForce GTX 745/PCIe/SSE2
LanguageVersion: 3.30 NVIDIA via Cg compiler
I then updated the NVIDIA driver:
Operating System: Windows 8.1 Pro, 64-bit
DirectX version: 11.0
GPU processor: GeForce GTX 745
Driver version: 350.12
After the update, LR6 reported success in finding the GPU:
Graphics Processor Info:
GeForce GTX 745/PCIe/SSE2
Check OpenGL support: Passed
Vendor: NVIDIA Corporation
Version: 3.3.0 NVIDIA 350.12
Renderer: GeForce GTX 745/PCIe/SSE2
LanguageVersion: 3.30 NVIDIA via Cg compiler
Cheers,
Frank -
hi hamilton,
thanks for your reply .
I already tried the option or pxisys.ini file
The MAX is showing the slot number ..but My requiremet is to use the slot ID in a DLL
so I need a function type of statemen to return or get the slot number of the NI devices on the PXI.
I think I clearly explained.
I would like to get the slot numbers through a software fucntion such that i can use the slot numbers values for some other purpose ,,like configuration ,,jayamurugan,
This functionality currently is not built into National Instruments software. You can get the device number, but not the slot numbers programmatically.
Trey Hamilton
Applications Engineer
National Instruments
http://www.ni.com/support -
Can't use Graphics Processor for Photoshop CS6 on Windows 8
Hi,
I just got a fresh upgrade from Windows 7 to Windows 8 Pro (not beta) but then I can't use Photoshop that well. In the Preferences > Performance, I can't tick "Use Graphics Processor". I have an ATI graphics card and yep, I've already tried upgrading/reinstalling my graphics driver, even installing old ones -- and still, this doesn't solve my problem (even in its control panel, I can't seem to see the settings of the graphics card!)
Any ideas/suggestions on how to fix this? Thanks!What display driver have you installed? And what is your card?
The ATI Catalyst 12.8 driver release claims to be compatible with Windows 8, though I haven't tried the combination myself yet.
Did you install Windows 8 as an upgrade or a clean install? The latter is always preferable.
I know a secret registry incantation that will force Photoshop to use the OpenGL subsystem no matter what, and I've used that to get GPU acceleration in a test installation in a virtual machine, but rather that put that forth just yet let's find out if you've done all you can the "above board" way first.
-Noel -
SB Audigy Value Windows XP applications All functions includin What U Hear working Proper
I have SB Audigy Value Card (SE/LS/ Li've 24 bit)Windows Vista 32 bit SP Classic Windows XP applications, Creative EAX SettingsCreative Graphic EqualizerCreative Speaker SettingsDevice Control And XP Drivers 5.2..54 Driver Date: 3.06.2007 Digitally Signed All the settings including "What u Hear" function work flawlessly under 4. system. (I didn't try 5./7. but I think it should work) I just mixed the applications from old and new driver packages and tricked the set-up program to install the XP drivers instead. I'm not a sound expert but I'm much more satisfied with tihs driver especially while listenig to music. I didn't try it with any games so I don't know. Download Link:http://rapidshare.com/files/9395098/...e0077.exe.html All the files included in this package are Creative's property.
I've spent ages searching the forums and can find other people who have experienced the problem but have yet found a fix. They've also explained the problem better so I'll try and make this a little clearer also.
When using Ventrillo first people can hear me fine in Ventrillo but an awful sound (described as the sound of 000 demons) in Counter Strike.<
When using CS first people can hear me fine in Counter Strike but the screeching sound is heard in Ventrillo.< -
Ok, details of installation below, so when I try compose an email, I just get a compose window icon stuck in the windows
taskbar can't actually enlarge it and use it. If I restart in safe mode with all addons disabled, then it works fine. But
If I restart normally and manually disable addons/plugins, then close and start normally again i.e not safe mode, it
breaks, so does not seem to be an addon or plugin but rather something with the configuration.
Application Basics
Name Thunderbird
Version 31.6.0
User Agent Mozilla/5.0 (Windows NT 6.1; rv:31.0) Gecko/20100101 Thunderbird/31.6.0
Profile Folder
Show Folder
(Local drive)
Application Build ID 20150330093429
Enabled Plugins about:plugins
Build Configuration about:buildconfig
Memory Use about:memory
Mail and News Accounts
ID Incoming server Outgoing servers
Name Connection security Authentication method Name Connection security Authentication method Default?
account2 (none) Local Folders plain passwordCleartext
account3 (nntp) news.mozilla.org:119 plain passwordCleartext stbeehive.oracle.com:465 SSL passwordCleartext true
account5 (imap) stbeehive.oracle.com:993 SSL passwordCleartext stbeehive.oracle.com:465 SSL passwordCleartext true
Crash Reports
Report ID Submitted
bp-0a8986d2-ff0c-41c3-9da6-e770e2141224 24/12/2014
bp-01f44ba7-3143-4452-ac98-981b62140123 23/01/2014
Extensions
Name Version Enabled ID
British English Dictionary 1.19.1 false [email protected]
Lightning 3.3.3 false {e2fda1a4-762b-4020-b5ad-a41df1933103}
Oracle Beehive Extensions for Thunderbird (OracleInternal) 1.0.0.5 false [email protected]
Important Modified Preferences
Name Value
accessibility.typeaheadfind.flashBar 0
browser.cache.disk.capacity 358400
browser.cache.disk.smart_size_cached_value 358400
browser.cache.disk.smart_size.first_run false
browser.cache.disk.smart_size.use_old_max false
extensions.lastAppVersion 31.6.0
font.internaluseonly.changed false
font.name.monospace.el Consolas
font.name.monospace.tr Consolas
font.name.monospace.x-baltic Consolas
font.name.monospace.x-central-euro Consolas
font.name.monospace.x-cyrillic Consolas
font.name.monospace.x-unicode Consolas
font.name.monospace.x-western Consolas
font.name.sans-serif.el Calibri
font.name.sans-serif.tr Calibri
font.name.sans-serif.x-baltic Calibri
font.name.sans-serif.x-central-euro Calibri
font.name.sans-serif.x-cyrillic Calibri
font.name.sans-serif.x-unicode Calibri
font.name.sans-serif.x-western Calibri
font.name.serif.el Cambria
font.name.serif.tr Cambria
font.name.serif.x-baltic Cambria
font.name.serif.x-central-euro Cambria
font.name.serif.x-cyrillic Cambria
font.name.serif.x-unicode Cambria
font.name.serif.x-western Cambria
font.size.fixed.el 14
font.size.fixed.tr 14
font.size.fixed.x-baltic 14
font.size.fixed.x-central-euro 14
font.size.fixed.x-cyrillic 14
font.size.fixed.x-unicode 14
font.size.fixed.x-western 14
font.size.variable.el 17
font.size.variable.tr 17
font.size.variable.x-baltic 17
font.size.variable.x-central-euro 17
font.size.variable.x-cyrillic 17
font.size.variable.x-unicode 17
font.size.variable.x-western 17
gfx.blacklist.suggested-driver-version 257.21
mail.openMessageBehavior.version 1
mail.winsearch.firstRunDone true
mailnews.database.global.datastore.id 8d997817-eec1-4f16-aa36-008d5baeb30
mailnews.database.global.indexer.enabled false
network.cookie.prefsMigrated true
network.tcp.sendbuffer 65536
places.database.lastMaintenance 1429004341
places.history.expiration.transient_current_max_pages 78789
plugin.disable_full_page_plugin_for_types application/pdf
plugin.importedState true
plugin.state.flash 0
plugin.state.java 0
plugin.state.np32dsw 0
plugin.state.npatgpc 0
plugin.state.npctrl 0
plugin.state.npdeployjava 0
plugin.state.npfoxitreaderplugin 0
plugin.state.npgeplugin 0
plugin.state.npgoogleupdate 0
plugin.state.npitunes 0
plugin.state.npoff 0
plugin.state.npqtplugin 0
plugin.state.nprlsecurepluginlayer 0
plugin.state.npunity3d 0
plugin.state.npwatweb 0
plugin.state.npwlpg 0
plugins.update.notifyUser true
Graphics
Adapter Description NVIDIA Quadro FX 580
Vendor ID 0x10de
Device ID 0x0659
Adapter RAM 512
Adapter Drivers nvd3dum nvwgf2um,nvwgf2um
Driver Version 8.15.11.9038
Driver Date 7-14-2009
Direct2D Enabled Blocked for your graphics driver version. Try updating your graphics driver to version 257.21 or newer.
DirectWrite Enabled false (6.2.9200.16571)
ClearType Parameters Gamma: 2200 Pixel Structure: R
WebGL Renderer Blocked for your graphics driver version. Try updating your graphics driver to version 257.21 or newer.
GPU Accelerated Windows 0. Blocked for your graphics driver version. Try updating your graphics driver to version 257.21 or newer.
AzureCanvasBackend skia
AzureSkiaAccelerated 0
AzureFallbackCanvasBackend cairo
AzureContentBackend cairo
JavaScript
Incremental GC 1
Accessibility
Activated 0
Prevent Accessibility 0
Library Versions
Expected minimum version Version in use
NSPR 4.10.6 4.10.6
NSS 3.16.2.3 Basic ECC 3.16.2.3 Basic ECC
NSS Util 3.16.2.3 3.16.2.3
NSS SSL 3.16.2.3 Basic ECC 3.16.2.3 Basic ECC
NSS S/MIME 3.16.2.3 Basic ECC 3.16.2.3 Basic ECCNoticed this in the info supplied:
Graphics Adapter Description NVIDIA Quadro FX 580
Vendor ID 0x10de
Device ID 0x0659
Adapter RAM 512
Adapter Drivers nvd3dum nvwgf2um,nvwgf2um
Driver Version 8.15.11.9038
Driver Date 7-14-2009
Direct2D Enabled Blocked for your graphics driver version.
Try updating your graphics driver to version 257.21 or newer.
Could you update your graphics driver and retest. -
Saound blaster audigy value windows vista 32 bit problem in driver compatibility!!!
i have installed the sb audigy value latest drivers july 9 2007?and it installed clean and then after a few restart it will detect again the standard?pci to pci bridge and sound devices... when i am using?xp this does not happenwhat is wrong with your drivers? i am installing the?drivers?again and again and same thing happen and my settings reverting always to 6 bit 48khz my card is 24 bit 96khz in the first install... and after a few restart?the setting for 24 bit and 96khz?will dissapear and the only available is 6 bit 48khz somtimes not working? kindly help me... plz... all my problem in windows vista 32 bit has been resolve this is the only one remaining...
Graphic drivers for the iMac is a regular question, and there are some tips and answers. I'd have skipped Vista, too much like beta and gone for 7, but you have it now....
Check the end of this thread with tips:
http://discussions.apple.com/thread.jspa?threadID=1866970&tstart=0&messageID=112 87449#11287449
And take a look for other similar threads. -
Severe Jitter/Glitches with Audigy Value/SE in Windows 7 64bit
Hello all,
Im experiencing a severe sound jitter and random "clicks" in windows 7 when playing music and using the computer for browsing.
I didnt notice this problem before because i used to keep my computer idle while doing other stuff when playing music.
the sound plays as if it "slows down" or something when doing random activities on the computer
My setup is
Intel Core 2 Duo E6550
4GB DDR2 800 MHZ
Creative Sound Blaster Audigy Value/SE
Windows 7 64BIT
Gefore 8880GT
I use winamp for playback.
Im using the latest drivers from the creative site.
Is there anything I can do?
The sound soThanks for the reply jmacguire.
I'm using default values: 6 bit, 48000 hz (DVD Quality)
Which one do you recommend with the SB Audigy SE?
The sound distorts when listening music in youtube or other flash webpages, both in normal and in HQ settings.
I have tried almost everything. I think the drivers downoladed for Windows 7 works better.
Then the Autoupdate function downloaded some new drivers (version .0090 I think) and it screwed up the sound on the web.
Maybe you are looking for
-
Error: The Operation Could Not Be Completed. There Is Not Enough Space on The Disk
Hi folks, I'm running Win7, CS5. The specs for the situation are as follows. Trying to Liquify a 419 mb (645 scan) .tif file. *Thing to note* Liquify loads slowly no matter what the file size, it seems to get caught while loading around the 7th block
-
Adobe reader installation file is missing? (need an awser ASAP)
Hi i work for a computer store and a coustmer called with a problem about his adobe reader. He said when he tries to open Adobe Reader it would say that the installation file was missing. So i figured it would be an easy fix right? just reinstall it
-
Hi, The reqmt in a report to fetch the PO , header material, component and calculate the theoritical value Zthe_value (fetching the value form RSEB-ENMNG). Fetching PO -EBELN and EBELP currently- select single * from resb where ebeln = t_result
-
Hello everyone, I am running a report in 10g (10.1.2) on the report server. This is for a Drill down report. So my master report contain some code that will run the detail report couple of time but my main report does not have to print anything since
-
Hi, I have an iBook G4 1.42 ghz 512 built in memory. I want to install more RAM and the Apple store & my son said it was a fairly straightforward matter. Someone said I have to take out the Airport card in order to install the RAM. Guess I'm afraid o