Windows 7 client won't connect with 802.1x security

Having issues connecting a windows 7 dell laptop with cisco unified wireless infrastructure. Currently running 4 4402 WLCs and 1 wism. The client in question is trying to connect to an AP that sits on one of the controllers on the wism. WLC code running is 6.0.199. If I configure the windows 7 client to an ssid with wpa2 with preshared key it works with no issue. It's really problematic with 802.1x, wondering if there is addition settings on the adapter in win 7 that I'm missing or have overlooked.
Thank you in advance for any suggestions to a solution to my problem
Regards,
izzy

Windows is going to want to use the credentials that you login to the machine. SO if you logged is as "administrator" but you need to authenticated as domain\John.Smith you need to manipulate the credentials.
If you are logging in to the machine with valid domain credentiasl though, it becomes a bit more difficult.
So, is this the only type of machine having an issue? What is the driver version and chipset type?
you can run debug client < cliet ma address > and watch what is happening from the controllers persepctive. You can also see what username is being sent to the AAA server.
Cheers,
Steve
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Similar Messages

I just installed Airport Extreme. It works as a wireless network on my Macbook. It won't connect with my Windows Visa PC. Message reads: "settings saved on this computer for the network don't match requirements of the network.

I just installed Airport Extreme. It works as a wireless network on my Macbook. It won't connect with my Windows Visa PC. Message reads: "settings saved on this computer for the network don't match requirements of the network." I seem to need to enter a security key/passphrase to connect to the PC. Where do I find them?
Thanks for your help.

I assume that you have Wireless Security enabled on your AirPort's wireless network. The issue maybe that the PC is unable to use the WPA password itself and will require using the Equivalent Network Password instead.
To get this password, you will use the AirPort Utility from the MacBook:
Start the AirPort Utility > Select the AirPort base station > Manual Setup
Now, before doing anything else, go up to the utility's menu bar at the top of the screen, and then, choose "Base Station," and then, Equivalent Network Password from the drop-down menu. You will see two items: 1) WPA Password, which should look familiar to you, and 2) WPA Pre-Shared Key. It should be a long hexidecimal set of numbers and letters. Jot down this second item.
You will want to use the value you just jotted down when entering the password from the Windows Visa PC.

Deskjet Advantage 3540 (Envy 4500): Computer won't connect with printer during software installation

I just bought this printer and I am trying to install it by using the HP installation CD but I am running into difficulties to complete the process. The problem is that the computer won't connect with the printer (but my printer connects fine with my Wi-Fi network) and installation does not complete.
The HP software installation process appears to go normally (at least no error messages are shown) but when it gets to the part where it asks me how I would like to connect to the printer (Wireless or USB cable) I get an error message when I select Wireless Mode. My printer appears listed but as soon as I select it, a dialog is shown stating that "network installation could not be performed".
Below are the dialogs and what happens (text is in portuguese but you get the idea)
Dialog 1: selecting wireless connection mode
Dialog 2: printer appears in list and I select it
Dialog 3: Error message is shown, no further details
Here are some more facts:
(1) Printer connect fines with my Wi-Fi network: the connection details are correctly shown in its display (Wi-Fi SSID and IP 192.168.0.6) ;
(2) If I go to a web browser in my computer and type in the IP address, I can access the printer's webpage fine;
(3) I've tried uninstalling and reinstalling HP software;
(4) I've resetted my router;
(5) I've executed "HP Print and Scan Doctor" utility and it states my software hasn't been installed (which I don't understand) and it tries to download HP software and install one more time and I get to the error.
(6) If I go to "Start" menu, I can see the HP group is empty (installation only creates icons on my desktop). See picture below:
My OS is Windows 7 64 bit Ultimate (Service Pack 1)
EDIT: I've just discovered the inkjet Advantage 3540 and Envy 4500 appear to be the same printer, each target to a different market.
Help is much appreciated as I tried a lot of things to make this printer work wirelessly with my computer but without success.
Thank you,
Joao Pedro

Hi JoaoPedro,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
Sorry to hear that you are having installation issues.
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Thank you for your time
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Tried to update to newest version. I got error because i didn't have this recovery program disc that was supposed to come with the purchase but it didn't and now my ipod touch 8gb won't connect with itunes and is stuck on a connection with itunes screen

I tried to update to newest version via pc. I got error because i didn't have this recovery program disc that was supposed to come with the purchase so it says, but it didn't and now my ipod touch 8gb won't connect with itunes anymore and is stuck on a screen displaying an itunes icon with a usb icon.

oke i'm not done with the whole thing, but i'm doing that right now. Most of the advice I've already read didn't work and at a certain point it said something about shutting down programs then restart. but i notice that there are some pretty important system things in that list and i don't want to mess up my pc :s i'm not a pc genius... and because i'm dutch and my pc-language is in dutch I often have trouble translating and well... i don't always understand the technical stuff in all the articles -_-

After lion 10.7.3 update messed my mac had to restore from time machine now Outlook won't connect with microsoft exchange, any idea?

after lion 10.7.3 update messed my mac had to restore from time machine now Outlook won't connect with microsoft exchange, any idea?

I've had a similar problem. On my first boot up after installing 10.7.4, Firefox would not open. Crashed every time. Safari was not affected. I have no idea if it was related to the flash plugin, but I did install a the latest version of that a couple of weeks ago.
Here's what fixed it: a second boot up.

Nokia N9 can not connect with 802.1x WLAN security

Hi,
Can anybody please help me how to connect with 802.1x WLAN security network. All of other symbian devices N8, E7 can connect with it. I have the N9 latest phone from Nokia and it dont even support 802.1x in WLAN security options. I have searched through a lot of forums and this topic isn't even anywhere. Please help

1st of all 802.1X is not even listed in Security method for of WLAN settings in Nokia N9 PR1.1. However same is listed in Symbian^3 for Nokia N8 and E7. 2ndly same settings works on N8 and E7 but not on N9. N9 showing me "something's wrong with network connection". In the syslog, i am getting these error msges.
Feb 7 12:46:29 (2012) icd2 0.201.2+0m6[1271]: WLAN: Asked data for ssid "mobily" but got 5 results but no req ssid, ignoring all results (up=0x1249c)
Feb 7 12:46:30 (2012) EAP[2691]: EAP 2.1.50+0m6 quitting.
Feb 7 12:46:30 (2012) kernel: [ 465.324401] wl1271: down
Feb 7 12:46:31 (2012) icd2 0.201.2+0m6[1271]: Removing active IAP 0x367b8/(nil)/(nil)/(nil)
Feb 7 12:46:38 (2012) wlancond[1037]: Scan command failed: -100
I am adding snapshots of Nokia E7 & N9 for comarison of settings
Attachments:
E7 1.jpg ‏40 KB
E7 2.jpg ‏31 KB
E7 3.jpg ‏50 KB

Microsoft Exchange won't connect with my iPhone (it's saying the password is incorrect, but it shouldn't be), now I can't delete that inbox on the phone. Help??

Microsoft Exchange won't connect with my iPhone (it's saying the password is incorrect, but it shouldn't be), now I can't delete that inbox on the phone. Help??

Turn off wifi. Use wireless signal. reenter password at settings. This should work. Turn wifi back on if you wish. Wait for next occurrence within hours or days. Have not found a permanent preventive solution. Thinking of replacing my four year old wireless router.

My iPhone won't connect with my computer or charge. How can I fix this?

My iPhone won't connect with my computer. It also will not charge. I changed the white charging cord, but I have the same problem. I connected other devices to the USB and they work. It's strictly the iPhone.
How can I correct this?

I forgot to mention, the iPhone does charge via wall plug.

N95 8GB won't connect to EAP-TLS secured WLAN

Hi all,
Has anyone succeeded in connecting to EAP-TLS secured wifi network? I have an N95 8GB with the latest firmware (updated yesterday) that cannot connect to my office wlan.
I’ve been reading this forum (and others google found) and here’s what I’ve done:
* defined an access point with 802.1x security mode and EAP-TLS
* exported the certificate from my IE, imported it into the phone and selected it in the Personal Certificate filed
* selected the accompanying rootCA certificate as Authority Certificate (tried leaving it blank as well)
* tried different Ciphers just in case
Every connection attempt results in "EAP-TLS authentication failed" and I’m never asked for password.
I’ve been talking to our admin (I’m afraid he’ll start to hate me before too long ) and found out that after the firmware upgrade and a couple of hours of trying this-or-that I’ve managed to have proper username sent to the server. But the message remains.
Here’s a part of the event log forwarded to me by the admin (fully qualified username is stripped by him but it seems to be correct):
Event Type: Warning
Event Source: IAS
Event Category: None
Event ID: 2
Client-Friendly-Name = wifi2
NAS-Port-Type = Wireless - IEEE 802.11
NAS-Port = 46
Proxy-Policy-Name = Use Windows authentication for all users
Authentication-Provider = Windows
Authentication-Server =
Policy-Name = wifi
Authentication-Type = EAP
EAP-Type =
Reason-Code = 22
Reason = The client could not be authenticated because the Extensible Authentication Protocol (EAP) Type cannot be processed by the server
As far as I can see my nokia cannot use a proper EAP-Type. Does anyone have a clue on what to do?
George
P.S. I believe we are using Radius server and a google search for the stated Reason gives a number of Radius-related results, but they describe cases when PC's cannot connect. I can connect to the wlan with my laptop with no prob (but it asks for credentials each time - don't know if it matters).

Hi
Even I am facing the same problem.
However Opera 8.65 is working fine with the said configuration
-Ramesh V

Switching WSUS server and Windows 8.1/Server2008/Server2012 clients won't connect, Windows 7/Server2003 is fine

I need to split the load of my WSUS on to another site because the amount of computers is straining the internet connection in the amount of uploads performed.
However I'm having an issue at the second WSUS where only Windows 7 and Server 2003 clients will update...
Windows 8.1 and Server 2008 and Server2012 won't update giving the following error codes: 8024400A and 80072EE2
The WSUS is a Server 2012 with Local Update Publisher 1.1 installed. It works fine locally at the site but not across our WAN.
The clients appear in the WSUS console but fail to check for updates.
I've tried it with the firewall turned off...
Both WSUS servers are using Microsoft SCEP 2012.
Has anyone out there experienced this? Or have any suggestions to fix?
Cheers.

Hi there,
I spoke too soon, I think I got one Windows 8 client to update yesterday by fluke. Now today it won't.
There's not much different between the W7 and W8 systems they both use the same antivirus. Same software but updated on W8.
Here is the windows update.log:
2014-06-05 10:44:14:561
976 954
Misc =========== Logging initialized (build: 7.9.9600.17093, tz: +1000) ===========
2014-06-05 10:44:14:639
976 954
Misc = Process: C:\Windows\system32\svchost.exe
2014-06-05 10:44:14:639
976 954
Misc = Module: c:\windows\system32\wuaueng.dll
2014-06-05 10:44:14:561
976 954
Service *************
2014-06-05 10:44:14:639
976 954
Service ** START ** Service: Service startup
2014-06-05 10:44:14:639
976 954
Service *********
2014-06-05 10:44:15:311
976 954
IdleTmr Non-AoAc machine. Aoac operations will be ignored.
2014-06-05 10:44:15:311
976 954
Agent * WU client version 7.9.9600.17093
2014-06-05 10:44:15:326
976 954
Agent WARNING: SleepStudyTracker: Machine is non-AOAC. Sleep study tracker disabled.
2014-06-05 10:44:15:326
976 954
Agent * Base directory: C:\Windows\SoftwareDistribution
2014-06-05 10:44:15:326
976 954
Agent * Access type: No proxy
2014-06-05 10:44:15:326
976 954
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-06-05 10:44:15:326
976 954
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2014-06-05 10:44:15:326
976 954
Agent * Network state: Connected
2014-06-05 10:44:15:326
976 954
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-06-05 10:44:15:326
976 954
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2014-06-05 10:44:16:123
976 954
Agent *********** Agent: Initializing global settings cache ***********
2014-06-05 10:44:16:123
976 954
Agent * Endpoint Provider: 00000000-0000-0000-0000-000000000000
2014-06-05 10:44:16:123
976 954
Agent * WSUS server: http://10.155.194.59:8530
2014-06-05 10:44:16:123
976 954
Agent * WSUS status server: http://10.155.194.59:8530
2014-06-05 10:44:16:123
976 954
Agent * Target group: Test Group
2014-06-05 10:44:16:123
976 954
Agent * Windows Update access disabled: No
2014-06-05 10:44:16:170
976 954
WuTask WuTaskManager delay initialize completed successfully..
2014-06-05 10:44:16:170
976 954
AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2014-06-05 00:24:13, not idle-only, not network-only
2014-06-05 10:44:16:170
976 954
AU Timer: CF1ABEC6-7887-4964-BB93-B2E21B31CEC1, Expires 2014-06-05 05:36:25, not idle-only, not network-only
2014-06-05 10:44:16:170
976 954
AU Timer: 29A863E7-8609-4D1E-B7CD-5668F857F1DB, Expires 2014-06-05 05:36:25, not idle-only, not network-only
2014-06-05 10:44:16:170
976 954
Report CWERReporter::Init succeeded
2014-06-05 10:44:16:170
976 954
Agent *********** Agent: Initializing Windows Update Agent ***********
2014-06-05 10:44:16:170
976 954
DnldMgr Download manager restoring 0 downloads
2014-06-05 10:44:16:170
976 954
AU ########### AU: Initializing Automatic Updates ###########
2014-06-05 10:44:16:170
976 954
AU Additional Service {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782} with Approval type {Scheduled} added to AU services list
2014-06-05 10:44:16:170
976 954
AU AIR Mode is disabled
2014-06-05 10:44:16:170
976 954
AU # Policy Driven Provider: http://10.155.194.59:8530
2014-06-05 10:44:16:170
976 954
AU # Detection frequency: 22
2014-06-05 10:44:16:170
976 954
AU # Target group: Test Group
2014-06-05 10:44:16:170
976 954
AU # Approval type: Scheduled (Policy)
2014-06-05 10:44:16:170
976 954
AU # Auto-install minor updates: Yes (Policy)
2014-06-05 10:44:16:170
976 954
AU # ServiceTypeDefault: Service 117CAB2D-82B1-4B5A-A08C-4D62DBEE7782 Approval type: (Scheduled)
2014-06-05 10:44:16:170
976 954
AU # Will interact with non-admins (Non-admins are elevated (Policy))
2014-06-05 10:44:16:186
976 954
AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80070032
2014-06-05 10:44:16:186
976 954
AU AU finished delayed initialization
2014-06-05 10:44:16:202
976 954
AU Adding timer:
2014-06-05 10:44:16:202
976 954
AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2014-06-05 03:47:12, not idle-only, not network-only
2014-06-05 10:44:16:217
976 99c
DnldMgr Asking handlers to reconcile their sandboxes
2014-06-05 10:45:17:562
976 954
AU ReAttemptDownloadsAsUserIfNecessary, No calls in download progress.
2014-06-05 10:45:31:453
976 778
IdleTmr Incremented idle timer priority operation counter to 1
2014-06-05 10:45:34:562
976 778
AU Triggering AU detection through DetectNow API
2014-06-05 10:45:34:562
976 778
AU Additional Service {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782} with Approval type {Scheduled} added to AU services list
2014-06-05 10:45:34:562
976 778
AU Triggering Online detection (interactive)
2014-06-05 10:45:34:562
976 778
AU Adding timer:
2014-06-05 10:45:34:562
976 778
AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2014-06-05 00:45:34, not idle-only, not network-only
2014-06-05 10:45:34:609
976 954
AU #############
2014-06-05 10:45:34:609
976 954
AU ## START ## AU: Search for updates
2014-06-05 10:45:34:609
976 954
AU #########
2014-06-05 10:45:34:609
976 954
AU Additional Service {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782} with Approval type {Scheduled} added to AU services list
2014-06-05 10:45:34:609
976 954
IdleTmr WU operation (CSearchCall::Init ID 1) started; operation # 15; does use network; is not at background priority
2014-06-05 10:45:34:609
976 954
IdleTmr Incremented idle timer priority operation counter to 2
2014-06-05 10:45:34:797
976 954
Report *********** Report: Initializing static reporting data ***********
2014-06-05 10:45:34:797
976 954
Report * OS Version = 6.3.9600.0.0.65792
2014-06-05 10:45:34:797
976 954
Report * OS Product Type = 0x00000004
2014-06-05 10:45:34:813
976 954
Report * Computer Brand = Microsoft Corporation
2014-06-05 10:45:34:813
976 954
Report * Computer Model = Virtual Machine
2014-06-05 10:45:34:813
976 954
Report * Platform Role = 1
2014-06-05 10:45:34:813
976 954
Report * AlwaysOn/AlwaysConnected (AOAC) = 0
2014-06-05 10:45:34:813
976 954
Report * Bios Revision = 090004
2014-06-05 10:45:34:813
976 954
Report * Bios Name = BIOS Date: 03/19/09 22:51:32 Ver: 09.00.04
2014-06-05 10:45:34:813
976 954
Report * Bios Release Date = 2009-03-19T00:00:00
2014-06-05 10:45:34:813
976 954
Report * Bios Sku Number unavailable.
2014-06-05 10:45:34:813
976 954
Report * Bios Vendor = American Megatrends Inc.
2014-06-05 10:45:34:813
976 954
Report * Bios Family unavailable.
2014-06-05 10:45:34:828
976 954
Report * Bios Major Release unavailable.
2014-06-05 10:45:34:828
976 954
Report * Bios Minor Release unavailable.
2014-06-05 10:45:34:828
976 954
Report * Locale ID = 3081
2014-06-05 10:45:35:578
976 954
Agent *** START *** Queueing Finding updates [CallerId = AutomaticUpdatesWuApp Id = 1]
2014-06-05 10:45:35:609
976 954
AU <<## SUBMITTED ## AU: Search for updates [CallId = {CDA6DEA2-9874-4DB5-AAA7-9A05D933C012} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
2014-06-05 10:45:35:609
976 fc4
Agent *** END *** Queueing Finding updates [CallerId = AutomaticUpdatesWuApp Id = 1]
2014-06-05 10:45:35:609
976 fc4
Agent *************
2014-06-05 10:45:35:609
976 fc4
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdatesWuApp Id = 1]
2014-06-05 10:45:35:609
976 fc4
Agent *********
2014-06-05 10:45:35:609
976 fc4
Agent * Online = Yes; Ignore download priority = No
2014-06-05 10:45:35:609
976 fc4
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-06-05 10:45:35:609
976 fc4
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-06-05 10:45:35:609
976 fc4
Agent * Search Scope = {Machine & All Users}
2014-06-05 10:45:35:609
976 fc4
Agent * Caller SID for Applicability: S-1-5-21-1323361640-3159480285-1943353560-1532
2014-06-05 10:45:35:609
976 fc4
Agent * RegisterService is set
2014-06-05 10:45:35:625
976 fc4
EP Got WSUS Client/Server URL: "http://10.155.194.59:8530/ClientWebService/client.asmx"
2014-06-05 10:45:35:641
976 fc4
Setup Checking for agent SelfUpdate
2014-06-05 10:45:35:641
976 fc4
Setup Client version: Core: 7.9.9600.17093 Aux: 7.9.9600.17093
2014-06-05 10:45:35:641
976 fc4
EP Got WSUS SelfUpdate URL: "http://10.155.194.59:8530/selfupdate"
2014-06-05 10:45:35:672
976 fc4
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab with dwProvFlags 0x00000080:
2014-06-05 10:45:35:734
976 fc4
Misc Microsoft signed: NA
2014-06-05 10:45:35:734
976 fc4
Misc Infrastructure signed: Yes
2014-06-05 10:45:35:734
976 fc4
Misc WARNING: Cab does not contain correct inner CAB file.
2014-06-05 10:45:35:734
976 fc4
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab with dwProvFlags 0x00000080:
2014-06-05 10:45:35:734
976 fc4
Misc Microsoft signed: NA
2014-06-05 10:45:35:750
976 fc4
Misc Infrastructure signed: Yes
2014-06-05 10:45:35:766
976 fc4
Setup Skipping SelfUpdate check based on the /SKIP directive in wuident
2014-06-05 10:45:35:766
976 fc4
Setup SelfUpdate check completed. SelfUpdate is NOT required.
2014-06-05 10:45:35:907
976 fc4
PT +++++++++++ PT: Synchronizing server updates +++++++++++
--continued--

DirectAccess Windows 8 Client Won't Connect - Last Error Code: 0x2af9

Hi All
Well I've had 2012 DirectAccess up and running now for about 2/3 weeks (using Win8 client only), it's been "ok" (most problems are client based - like Services not restarting upon resuming from sleep).
Yesterday I spent many hours connected to DirectAccess from my Windows 8 Laptop. When it's working, I love it.
Today, it's a completely different story.
Windows 8 won't damn well connect. At first I started getting prompted to enter proxy credentials (I have no idea why, have never been prompted for this before and the internal TMG proxy shouldn't even be in the loop, given my DA server has it's own
public IP address). The DA server has a completely separate public IP to the proxy's public IP address and the DA is setup with 2x NICs.
The error I'm getting is:
Interface IPHTTPSInterface (Group Policy) Parameters
Role                       : client
URL                        :
https://da.fqdn:443/IPHTTPS
Last Error Code            : 0x2af9
Interface Status           : failed to connect to the IPHTTPS server. Waiting to reconnect
Where do I find out what 0x2af9 error code means?

Hi,
The information for your errorcode seems to be related to not beeing able to lookup the host (the information from MSDN is pasted below.)
Can you verify that your client can resolve "da.fqdn" to the correct IPv4 address?
http://msdn.microsoft.com/en-us/library/windows/desktop/ms681391.aspx
WSAHOST_NOT_FOUND
11001 (0x2AF9)
No such host is known.
Jonas Blom | Relevo AB |
http://blog.nrpt.se
Hi Jonas
Thanks for your input. I think you might be right.
I suspected IE wasn't resetting my connection settings (even though I had un-ticked 'use a proxy server' - I don't think it had 'applied').
So, I did a reset of IE10, noticed all of the connection settings were gone and DA connected.
There definitely seems to be a gap in the DirectAccess solution in that it refers to the IE proxy/connection settings rather than just goes out to the Internet like Outlook does. When on the Domain, obviously you'll receive GPOs which in most organisations
that use things like Proxies (e.g. TMG) these GPOs will apply the proxy settings, but then when you disconnect from the Domain and you want to roam, those proxy settings need to be disabled - at least until DA has connected, then you're free to apply
the proxy as the gateway again.
It's a bit annoying.

X201 thinkpad won't connect with windows updates

hello,
my 6-month-old lenovo thinkpad x201 will not connect with windows updates via firefox 3.6.13 or internet explorer 7.
Machine model # CTO; Machine type # 3249 Windows XP Pro, Service Pack 3 .
i would appreciate assistance.
thanks.

how about updating to internet explorer 8?
or firefox 4?
getting microsoft updates will probably work better with internet explorer 8 though?
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

WRT160N Won't Connect With Windows Mobile Device

I had another wireless router for years that connected almost instantly to my Windows Mobile 6.1 handheld device. I switched to the WRT160N and it works great with my wireless laptops. The device does not even show up in my available device lists on my Windows Mobile phone with wi-fi. I tried manually connecting and it does not work. I tried all of the other security settings, it does not work. The phone manufacturer (not the sevice provider which is Verizon) has acknowledged that they are having calls only about Cisco branded routers. Does anyone have a solution?

I had exactly the same problem. Tried the live technical support chat but didn't solve the problem. Resorted to random changing of settings and discovered if I changed the router setting Wireless -> Basic Wireless Settings - Network mode from 'Mixed' to 'BG-Mixed' my Windows Mobile 6.1 device found the network and happily connects with WPA2

Proxy client (over USB connection) with DHCP assigned IP address doesn't work with FRDM-K64F

Hello,
after reading about the issues on this forum with a static IP address on the Freescale FRDM-K64F board I went for an DHCP address but I can't get the proxy client to work over a USB connection with DHCP either.
My console tells me the following:
RTC Time: Wed 2014-01-01 00:07:27
Network initialized
IP Address:      10.143.xxx.yyy (xxx and yyy is real numbers, just changing them for the forum to letters)
Subnet mask:     255.255.252.0
Gateway:         10.143.xxx.yyy
MAC-address:     00:0c:00:06:70:00
And when I try o to connect with the following command :
java -jar proxy.jar -socket 10.143.xxx.yyy
I get the following output and no CLI interface:
Trying to open socket connection with device: 10.143.xxx.yyy:2201
Connected to the socket: Socket[addr=/10.143.xxx.yyy,port=2201,localport=49605]
Open channel 8 with hash 0x130399b3
Channel 8 CLOSED -> OPENED
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 OPENED -> AVAILABLE
Open channel 9 with hash 0x0
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
I don't know if this matter but my java version is:
java version "1.8.0_31"
Java(TM) SE Runtime Environment (build 1.8.0_31-b13)
Java HotSpot(TM) 64-Bit Server VM (build 25.31-b07, mixed mode)
Any ideas or am I missing something completely?
Thanks
Andy

Hi, Andy. Please excuse my ignorance, I am very new at this ME embedded stuff. I had my challenges, but was finally able to get my board up with a static address. I went through a lot of headaches, but finally got the board flashed with the latest bin. I then updated the jwc_properties.ini file on the SD card to include:
# Whether static configuration or DHCP server is used do get IP address. Possible values: dhcp,static
ip.method = static
# IP address,used with static IP configuration only
ip.addr = 192.168.0.30
# Network mask,used with static IP configuration only
ip.netmask = 255.255.255.0
# Network gateway,used with static IP configuration only
ip.gateway = 192.168.0.1
# DNS server,used with static IP configuration only
ip.dns = 208.67.222.222
# MAC address
mac.addr = 01:02:03:04:05:06
I was then put the card into the board, disconnected both USB cables, and then powered it up. From that point I was able to ping the board. I can now use Device Manager in NetBeans to connect to the device.
I am struggling quite a bit with many issues. It seems that when I try to stop the app from NetBeans, the "please wait" dialog hangs forever. I have to use Windows Task Manager to kill the "JavaW" process tree and reconnect the board.
I have also had trouble understanding the GPIO pin assignments. Another gotcha was trying to use the AutoStart feature. Since the sample app never cleanly exited, I thought that I bricked the board. The secret is to power it down, remove the SD card, and then delete all files EXCEPT the jwc_properties.ini file, put the SD card back in, then power up. It seems that the board forgets that the MIDlet was installed.
Hope this helps others out there.
Please everybody, post your experiences here. There seem to be very few of us, and finding pearls in the dust is rare right now.
Regards,
Pete

Zen Vision:M won`t connect with PC

So, when i connect Zen with PC, OS immediatly starts to find drivers, but Zen doesn't react on the connection.
I tried to install PC Application, but it didn't install, because it needs XP SP2 and my XP has third Service Pack.
I have found CMS, which has 3.03 version, but it didn't install too, because it couldn't find any connections with Creative products (My player was connected)
How can i connect Zen?
PS - Sorry for my probably mistakes, English language is foreign for me ))
PS2 - WMP 0- won't
Install on SP3, too.

Hello again )
Yesterday, i tried to connect the player with 2 PCs.
First had XP SP3 and when i`ve connected Zen with it, Zen showed an yellow picture with two black arrows (or something like that ), i've installed CMS 5 on that PC.
Second had XP SP2 and Zen didn't react on connection, i was confused.
It so interesting, that ZNVM_PCApp32_LA_6_2_0.exe didn't install on SP2, it showed the error :
The Windows operating system running on this computer is not supporter with the product.
Setup will exit.
What it the main requirement for PCApp32?

Windows 7 client won't connect with 802.1x security

Similar Messages

Maybe you are looking for