Windows 7 computer management error

hi everyone
i have installed windows 7 build 7600.And when i right click on computer to take computer management and i have got an error saying that "The file does not have a program associated with it.....

when did this error first occur, how long after you installed Windows 7. What other 3rd party programs did you install or run (like registry clean up tools).
This behavior can occur if the file you are trying to open is not associated with the correct program or the registry entries for the program are missing or damaged.
Method 1
Try to open computer management from control panel and check if it works.
To do this, follow these steps:
1. Open Control Panel, click Administrative tools.
2. Click on Computer Management.
Method 2
If it does not help, try to perform System Restore on the computer to restore back the previous settings.
To restore the operating system to an earlier point in time, follow these steps:
1. Click Start, type system restore in the Start Search box, and then click System Restore in the Programs list.
If you are prompted for an administrator password or confirmation, type your password or click Continue.
2. In the System Restore dialog box, click Choose a different restore point, and then click Next.
3. In the list of restore points, click a restore point that was created before you began to experience the issue, and then click Next.
4. Click Finish.
Note: When you perform System Restore to restore the computer to previous state, programs and updates you installed are removed.
Link to refer:
System Restore: frequently asked questions
http://windows.microsoft.com/en-US/windows7/System-Restore-frequently-asked-questions
What is System Restore?
http://windows.microsoft.com/en-us/windows7/What-is-System-Restore
Hope the information helps. Please post back and let us know.
MCSE, MCSA, MCDST
[If this post helps to resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others find the answer faster.]

Similar Messages

My i tunes wont open on either my laptop or my home computer laptop says error 7 windows 1114 computer says error 7 windows 126 what do i do

help what do i do
my i tunes wont open on either my laptop or my home computer laptop says error 7 windows 1114 computer says error 7 windows 126 what do i do?

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/APSDaemon.dll/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

Windows System Image Manager Error?

Hi Everyone,
I am having an issue trying to create an answer file through the WSIM. I locate the .wim I need and attempt to create the catalog file it needs first to do the task. However when I do attempt to create this catalog file I get the following error message:
There was an error generating a catalog file for the image ********* in Windows image file G:\RemoteInstall\Images\*******\*******.wim
Keep in mind the *** are just substitutes for the actual names.
If I attempt to just create a new answer file I am prompted with the message box "Editing an answer file without opening a Windows Image will result in limited functionality. Do you want to open a Windows image file now?
I choose yes then open the image and am informed -
"The catalog file for ******** cannot be opened for the following reason: Cannot fine the catalog file associated with the Window image ****. You must have a valid catalog file to continue. Do you want to create a catalog file?"
I click yes and then I get the same message as list on top. I am an admin on this box. Any thoughts or suggestions?
Thanks in advance for your input.

Hi,
First I would like to confirm if you are using the latest version of WAIK –WAIK 1.1. If not, I suggest installing WAIK 1.1 from the following site:
Automated Installation Kit (AIK) for Windows Vista SP1 and Windows Server 2008
http://www.microsoft.com/downloads/details.aspx?FamilyID=94bb6e34-d890-4932-81a5-5b50c657de08&DisplayLang=en
In addition, please make sure you are generating a catalog file for a install.wim file. You cannot generate a catalog file for a boot.wim file.
Because of the changes in the servicing stack in Windows Vista with Service Pack 1 (SP1) and Windows Server 2008, Windows System Image Manager (Windows SIM) cannot create catalog files for some Windows images of different architecture types. The following list describes the Image Manager architecture types and catalogs that can be created for each one.
x86 Windows SIM:
Can create catalogs for x86, x64, and Itanium-based Windows images.
x64 Windows SIM:
Can create catalogs only for x64 Windows images.
Itanium-based Windows SIM:
Can create catalogs only for Itanium-based Windows images.
Please confirm if what version of Windows SIM you are using. I recommend installing x86 Windows SIM.
For more information, please refer to the following thread:
Parameter count mismatch - Windows SIM failed
http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=3066853&SiteID=17
Hope it helps.
Tim Quan - MSFT

ITunes wont open on a Windows 7 computer - no errors, etc.

I can't seem to get iTunes to open on a computer after my father synced his iPad. I deleted and reinstalled, and tried opening in safe mode. Nothing is opening...it doesnt even show it in the Task Manager. Anyone who can help?

In the course of your troubleshooting to date, have you worked through the following document?
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues

Windows Failover Cluster Manager Error

I have a node that is not able join the Hyper-V cluster that it was previously running in the cluster without problems.
The cluster service encountered an unexpected problem and will be shut down. The error code was '2'.
C:\Windows\Cluster>clussvc.exe -s
-----------------------------+ LOG BEGIN +-----------------------------
[CS] Starting clussvc as a service
[CS] cluster service logging level is 5
[CS] Caught exception ERROR_FAILED_SERVICE_CONTROLLER_CONNECT(1063)' because of 'StartServiceCtrlDis
patcher( ServiceTable )'
    000007fe:fda6aa7d( ERROR_MOD_NOT_FOUND(126) )
    00000000:0018f5d0( ERROR_MOD_NOT_FOUND(126) )
    00000000:0018fbb0( ERROR_MOD_NOT_FOUND(126) )
    00000000:ffd1a368( ERROR_MOD_NOT_FOUND(126) )
    00000000:0018f5a0( ERROR_MOD_NOT_FOUND(126) )
    00000001:e06d7363( ERROR_MOD_NOT_FOUND(126) )
[CS] About to exit process...
C:\Windows\Cluster>
thank you for any guidance you may provide
ron
Ron Finnegan DHHS NIH NIMH LNT

Hi Ron,
Thank you for the reply.
Have you installed this hotfix?
http://support.microsoft.com/kb/975486
Related information:
http://blogs.technet.com/b/rspitz/archive/2010/08/26/the-cluster-service-service-terminated-with-service-specific-error-183-0xb7.aspx
http://technet.microsoft.com/en-us/library/cc756369(WS.10).aspx
Tim Quan
TechNet Subscriber Support in forum
If you have any feedback on our support, please contact [email protected]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer
your question. This can be beneficial to other community members reading the thread.

Update itunes on Windows XP computer

I keep getting the error message when trying to install update to my Windows XP computer get error message about privileges and Apple mobile device failed to start won't retry or ignore

Follow this article
http://support.apple.com/kb/HT1925
In order like it tells you to.. and if it appears that the apple mobile device support does not uninstall or goes backwards just ignore it and move on thru the list in order.
Once you are done uninstalling all five components.. restart your computer
Once the computer comes back on and is fully up and started go to www.apple.com/itunes and redownload itunes and install it.
This should resolve your issue!
If you want to try to avoid all that you can try this it worked for me.. close out all itunes files.. type in services and wait for it to come up.. click on services find the apple mobile device support and stop the service.. then go download itunes again and install it.. worked for me but I'm on windows 7 home premium.
Good luck!

Window server 2008 r2 error show "stop :- c00002e3 security account manager initialization failed because of the for A DIVICE ATTACHED to the system is not funcation"

Hi All
Please help
my server not working showing display error window server 2008 r2 error show "stop :- c00002e3 security account manager initialization failed because of the for A DIVICE ATTACHED to the system is not funcation"
Please help me how to resolve this issue ???
thnaks !!!

Hi,
If there is any external device plug into your computer, please unplug it and restart the Server.
You can also test the issue in Safe mode.
If it can boot into Safe mode, please update any driver has yellow warning on it, also check if the dump file is existing under %SystemRoot%\, if so, please help to post back for our research.
Kate Li
TechNet Community Support

Microsoft-Windows-Windows Remote Management Error ID 142

In my Windows Server 2008 R2 OS in the Event Viewer there is an error pertains as Microsoft-Windows-Windows Remote Management Error ID 142 states-(WSMan operation CreateShell failed, error code 2150858999).What is this error? And What is the remedy for this
error?
System
Provider
[ Name]
Microsoft-Windows-WinRM
[ Guid]
{A7975C8F-AC13-49F1-87DA-5A984A4AB417}
EventID
142
Version
0
Level
2
Task
10
Opcode
2
Keywords
0x4000000000000002
TimeCreated
[ SystemTime]
2011-11-10T06:32:40.654451200Z
EventRecordID
37902
Correlation
[ ActivityID]
{01F11C40-F800-0000-0091-795E689FCC01}
Execution
[ ProcessID]
7140
[ ThreadID]
8080
Channel
Microsoft-Windows-WinRM/Operational
Computer
WIN-BNILITE1545.mumthaz.contoso.com
Security
[ UserID]
S-1-5-18
EventData
operationName
CreateShell
errorCode
2150858999
MumthazMuhsin

Hi,
Please perform the following steps to check the issue can be fixed.
Create the following Dwords under HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
• MaxFieldLength
o Dword
o Value 65534 (Decimal)
• MaxRequestBytes
o Dword
o Value 40000 (Decimal)
Reboot the server for the changes to take effect.
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Trying to download PS CC on second computer (dell laptop-windows 7) but get error that I should close Bridge.exe ........................this file is not open..........I have both cs4

Trying to download PS CC on second computer (dell laptop-windows 7) but get error that I should close Bridge.exe ........................this file is not open..........I have both cs4 and cs5.1 on this laptop..............as well as the associated bridge files...........should I uninstall all of the OLD PS stuff, before attempting to install the PS CC..........................keep in mind I want to also download LR 5, after PS CC is installed correctly.

Terminate the process in task manager or turn off Minibridge in the PS prefs and restart your system.
Mylenium

TS3212 new windows 7 computer only download 99% of itunes then it fails. iTunes64Setup.exeUnknown network error

I have a new windows 7 computer running internet explorer 9, I also have google chrome, I manage to download 99% of itunes, 76.5 of 76.8MB dowloaded and 1 second to go then it fails and i get an error message which says "iTunes64Setup.exeUnknown network error."
I have managed to dowload quicktime successfully however. I have a hp pavillion g6.
Any ideas?
Thanks
Message was edited by: SarahB25

Perhaps try downloading and saving a copy of the installer to a different PC. (If you're on a 32-bit Windows system, try to download on a different 32-bit Windows system.) Copy the iTunesSetup.exe installer to an external hard-drive, or a large-enough thumb drive or burn it to a CD-R. Carry the installer back to your PC, copy the installer to your hard drive. (Don't run the install from the ExHD, thumb or CD-R.) Start the install by doubleclicking the iTunesSetup.exe file.

WIndows Server 2012 - Server Manager Error CLR20r3

WIndows Server 2012 - Server Manager Error CLR20r3
I have just experienced this error of ( CLR20r3) when trying to add or remove server roles.
Server Manager crashes when trying to go into the Add/ Or Remove server roles
What I have tried.
.NET Diag
.NET Fix
Lots of research, and didn't find any resolution.
Apparently this is not strictly tied to Windows Server 2012, as I see that Windows Server 2008 R2 , and even Windows desktop users have experienced this issue. With no direct resolution.
Here is a screen shot for reference.......
If anyone should obtain the MS Fix or hear of it, please post so that others who are experiencing this issue can find peace in their day.
I have given up, ended up performing a reinstall. ( sadly)
RF

Hi RF,
Based on your description, would you please refer to following operations and troubleshoot this issue?
Please use
Sytem File Checker tool to scan all protected system files.
Please
perform a clean boot to check if some third-party services affected.
Please backup the registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Ole. Then delete following two registry key (if exist): LeagcyImepersonationLevel and LegacyauthenticationLevel
Then log off and logon and monitor the result.
In addition, please navigate to %windir%\logs and check ServerManager and CBS log file if you can find some
relevant errors.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

My iPhone 5s won't turn off or on it keeps flashing the apple screen on off. When I tried to connect to iTunes on windows 8 computer, it comes up with an error message: iTunes could not connect to this phone. An unknown error occurred OxE8000084

Can anyone help me? My iPhone 5s is flashing the apple screen on and off and I can turn the phone on properly or off. When I connected it to iTunes on my windows 8 computer I got the following message: iTunes could not connect to this phone. An unknown error occurred OxE8000084. Can anyone help me correct this so I can start using my phone again.
Thank you

http://support.apple.com/kb/TS3221

RDS 2012 R2 - How do I lockdown access to Local Computer Management and Windows Backup via Group Policy

Greetings all,
I am needing assistance in how to lockdown access to Local Computer Management and Windows Backup via Group Policy for users that access RDS service. I have followed this awesome guide - h t t p://w w w.it.ltsoy.com/windows/lock-down-remote-desktop-services-server-2012/
- but it is missing two important resources that I would like to lock down.Currently, I have successfully locked down Control Panel for users via Group Policy, but I cannot find any group policy or guide on how to restrict user access
to Computer Management (different to Server Manager). When using Win-X shortcut to open the 'Administrator's shortcuts' near the windows icon, I have locked down everything except Computer Management. Computer Management gives direct access to Disk Management,
Shares etc, which are locked down for users. But Windows Server Backup is still accessible. Can someone please guide me on how to restrict access to both Computer Management and Windows Server Backup.
Thanks in advance.
Terry.

Prevent running of Windows Server Backup
Computer Configuration\Policies\Windows Settings\Security Settings\File System
Right click on File System - Add File - Drill down to \System32\wbadmin.msc
On the Database Security ACL that pops up - Remove Creator Owner, Remove Users and check Adminstrators have Full Access.
On the Object window - choose Propagate inheritable permissions to all... (Default)

TS3297 I have a Windows Vista computer. When I am in iTunes store and try to purchase a song I get error 42408

I have a Windows Vista computer. When I am in iTunes store and try to purchase music I get the error 42408

Although you're getting a different error message, I'd try the following document with that one:
iTunes: Missing folder or incorrect permissions may prevent authorization

Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help!

Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help! How do I remove this message every time I start up Windows? Would it help to
re-install Itunes and what version??

Refer to this thread - https://discussions.apple.com/message/15685210#15685210
Quick answer "copy the file SQLite3.dll from the C:\Program Files (x86)\Common Files\Apple\Apple Application Support folder to the C:\Program Files (x86)\Common Files\Apple\Mobile Device Support folder"

Windows 7 computer management error

Similar Messages

Maybe you are looking for