Windows 7 conflict with TSS Core Service

I upgraded to Windows 7 on an X61S and then cursor control failed in Outlook 2007 after I hit the enter key in new mail message. The solution was to disable the TSS Core Service (following help from microsoft). Now i need to find a compatible Thinkadvantage upgrade to get a upgraded TSS Core Service module. Whewre can I find that?

System info
Thinkpad X200
Windows 7 Pro 32bit OS
Affected applications
MS Word 2007
After opening an existing Word document, I can use the mouse to move the insertion point cursor to different parts of the document, to select objects and to highlight text.  As soon as I type anything new anywhere in the document and push the Enter key (or just push the Enter key), the mouse can no longer be used to move the insertion point to another location in the document nor can it select text or objects.  The arrow and shift keys still allow me to move around the document and select objects.
The problem seems to be caused by a bug in the Password Manager program that is included in the Lenovo Client Security Solution application.
Any official comments from Lenovo pls?

Similar Messages

  • Audigy2 Value conflicts with DigiCell & Core Cen

    I just installed an Audigy2 Value on my new home built system. I have a MSI Neo4-F motherboard with GB of ram. I had the system running clean for a week when I installed the Audigy 2. Install when smooth but then Norton come up 'OFF' and I got error messages that DigiCell and CoreCenter (two MSI programs) couldn't load. I cleared up the Norton problem by removing the Creative Media Source program. I removed and reloaded both the MSI programs, but still get the error messages. They don't auto load, but will run if started later.
    This problem seems to be related to the install of Creative programs. Is there a new driver, or new process I can follow to clear this up? Thanks

    I think you have done about all you can do without going to 3rd party drivers, with their inherent risks. Regarding Norton you do not need to uninstall Media Source, all you need to do is turn off mediasource GO.

  • BI+ Core services

    Hello Everybody,
    I am facing the same error as mentioned in the post below mine. I have reconfigured the 9BI+, but still this issue exist. But i have to restart BI+ Core Services everytime.
    We have 9BI+ 9.2.0.3 implemented Financial Reports and Web Analysis. I do start all the services in right order.(I will provide the list of services if required). But somehow there is issue with BI+ Core Services. i have to start each and every time after i log in back on the Server.
    While i am logged in i start this service again and workspace works fine. But when i log off from the server the BI+ Core Service stops on its own. I dont have it under Services windows, instead i have to go
    START > ALL PROGRAMS > HYPERION SYSTEM 9BI+ > UTILITIES AND ADMINISTRATION > START BI+ CORE SERVICES.
    help will be really appreciated.
    Thanks

    Shared services, Analytic services and the License manager are running . Also I am using MS SQL Server and it is running at the time.. here is what I get when I run startCommonServices.bat<BR>+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++<BR>com.brio.one.mgmt.logging.LoggingRuntimeException: LoggingManager.initialize(): <BR>Invalid file URL. <BR> at com.brio.one.mgmt.logging.LoggingManager.initialize(Unknown Source) <BR> at com.brio.one.system.Server.initializeLog4j(Unknown Source) <BR> at com.brio.one.system.Server.initialize(Unknown Source) <BR> at com.brio.one.system.Server.initialize(Unknown Source) <BR> at com.brio.one.system.Server.main(Unknown Source) <BR> at com.sqribe.transformer.SuperServerImpl.main(Unknown Source) <BR><BR>Unrecognized command: <BR>Unrecognized command: <BR>+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++<BR><BR>I don't know what this error means. and I am wondering if there is a document for the list of commands that I can use (for example some thing like start GSM services or something). the only command I know of is shutdown<BR>

  • [Forum FAQ]How to upgrade Windows Server 2008 R2 with a GUI to Windows Server 2012 Server Core

    We found that some customers willing to upgrade Windows Server 2008 R2 GUI to Windows Server 2012 Server Core recently. This article provides detailed steps to perform the upgrade.
    Analysis
    Upgrading from Windows Server 2008 R2 with a GUI installation to Windows Server 2012 with Server Core directly
    is not supported. If you do that, you will receive the error message below(Figure 1) in Compatibility report: 
    Figure 1.
    In these scenario, you can upgrade to Windows Server 2012 firstly. After the upgrade process is completed, you can switch freely between Server Core and Server with a GUI modes.
    Produces
    You can follow the steps below to perform an upgrade from Windows Server 2008 R2 with a GUI installation to Windows Server 2012 Server Core mode:
    1. Upgrade to Windows Server 2012 with a GUI mode
    1) Firstly, please boot into Windows Server 2008 R2 with a Windows Server 2012 installation DVD inserted.
    2) Select the operating system you want to install with a GUI mode.
    We can see 2 options (Server Core Installation or Server with a GUI) for each operating system version. (Figure 2)
    Figure 2.
    Note: Please make sure you have enough disk space on system partition. Or you will get such an error in Compatibility report.(Figure 3)
    Figure 3.
    After the Compatibility check, the installation will continue. It will take several minutes until upgrading is done.(Figure 4)
    Figure 4.
    2. Switch the GUI mode to Server Core
    Method 1: Using Server Manager
    1) Open Server Manager, click
    Manger and select “Remove Roles and Features” to start the
    Remove Roles and Features Wizard.
    2) In Features,
    uncheck the box next to the “User Interfaces and Infrastructure” option, and then click “Next”. (Figure 5)
    Figure 5.
    Now tick the “Restart the destination Server automatically if required” box, then click “Remove”. (Figure 6)
    Figure 6.
    Method 2: Using Windows PowerShell
    There are multiple ways to remove the GUI via Windows PowerShell, we introduce the way of using the ServerManager module.
    You can also run the commands in Windows PowerShell with an administrator to remove the GUI feature:
    “Import-Module ServerManager”
    “Uninstall-Windowsfeature Server-Gui-Shell –Restart”
    or
    “Uninstall-WindowsFeature Server-Gui-Shell, Server-Gui-Mgmt-Infra –Restart”
    It will take a period of time to remove the GUI feature and reboot. When the system boots up, you will get into the Windows Server 2012 with Server Core mode. (Figure 7)
    Figure 7.
    More information:
    Switch between Full and Server Core in Windows Server 2012 using PowerShell 3.0
    http://blogs.technet.com/b/puneetvig/archive/2012/10/16/switch-between-full-and-core-in-windows-server-2012-using-powershell-3-0.aspx
    Windows Server Installation and Upgrade
    http://technet.microsoft.com/en-us/windowsserver/dn527667.aspx
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    Hi,
    Brian is right, for mange the Server 2008r2 sp1 we recommend use the Windows 7 or 7.1 platform.
    More information:
    Remote Server Administration Tools for Windows 7 with Service Pack 1 (SP1)
    http://www.microsoft.com/en-us/download/details.aspx?id=7887
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Windows service Hyperion S9 BI+ 9.3 Core Services does not stop 100%

    Hi there,
    we run core and interactive reporting on a win2003 box and run them with windows servcies.
    Most of the times when I stop the "Hyperion S9 BI+ 9.3 Core Services" windows service it does not stop completely.
    In the windows taskmanager I see java.exe and rmservice8.exe still running.
    I have to kill those processes manualy to stop core completely.
    Is there a reason or a cause for this behaviour?
    And does anyone know -if this behaviour cant be avoided - how I command line driven stop the processes which still run?

    Sorry I seem to have posted into the wrong forum.

  • ORADC problem on Windows 2000 with Service pack 1 and service pack 2

    Hi,
    I have a VB application running on NT4.0 workstations. It uses
    ORADC control to talk to ORACLE 7.3 When I load it on Windows
    2000 with service pack 1 or service pack 2, I encounter some
    problems.
    The ORADC control is used in most of the VB forms and the
    Refresh method of the ORADC conrol is used to refresh the APEX
    TRUE DBGRID PRO control. When this action is executed, I receive
    a run time error
    "Method Refresh of object '_DORADC' failed Err#: -2147417848
    It works fine when no service pack is applied on Win2K.
    Can anyone tell me what's going on?
    Thanks

    satheesh_p wrote:
    Thanks for your reply.
    When I checked the system requirements. I couldn't find information on windows 2003 service pack 2
    link http://www.adobe.com/products/coldfusion/systemreqs/.
    Whether your OS is windows 2003 with service pack 2?
    Are you sure coldfusion 8 will work on windows 2003 with service pack 2?
    Regards,
    Satheesh.
    Well it was there, if you understand the naming properly:
    ColdFusion 8 system requirements
            Windows
    Intel® Pentium® II or AMD Athlon processor
    Microsoft®
    Windows® 2000 Professional with Service Pack 3; Windows 2000 Server,
    Advanced Server, or Datacenter Server with Service Pack 3; Windows
    Server® 2003 Web, Standard, or Enterprise Edition with Service Pack 1
    and R2; Windows Server® 2008; Windows XP Professional or Home Edition;
    or Windows Vista®
    R2 is the "offical" Microsoft name for service pack 2.

  • Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open.

    Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open, says it is for Mountian Lion.
    Of course I can't throw it away since I get a message it's part of the sytem. I can show package contents and throw those away, but evidently not a good idea!!

    Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open, says it is for Mountian Lion.
    Of course I can't throw it away since I get a message it's part of the sytem. I can show package contents and throw those away, but evidently not a good idea!!

  • HT1349 I have a laptop computer with Windows 7, powered intel core i7. I am trying to download a  purchased movie from ITunes. I am on wifi g.  Why is it taking 17 hours to download a simple movie? This is nuts!

    Question:  Why when downloading a purchased movie from ITunes does it take 8 to 17 hours to download?  I have an HP Laptop with Windows 7 using a core processer i7.  This is the second day to try to get the movie downloaded and I still cannot watch this movie.  Seems like a problem with ITunes or a scam. I use a IPhone 4 with little issues, But when using this lap top -- it is a joke.

    First thing to do is get the CC off your system.  Then try the direct download option linked below...
    You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

  • Windows Server 2008 R2 DNS service issue with BitLocker

    I recently installed BitLocker on a Windows Server 2008 Platform. I did not encrypt the boot partition because the server hardware BIOS did not have the necessary requirements to encrypt the system drive.
    The Server roles are ADSM, DC and File Server. For DC operation I am also running the DNS service.
    When I installed the DNS role I was prompted to install the Log files on a different volume than the OS. I did this, but unfortunately, it was the same volume that was encrypted.
    Since I could not encrypt the system disk, the encrypted volume must be unlocked via password in order to mount. Here in lise my problem.
    When I do a full reboot of the server, I get to the point in the boot process where my mouse is visible and operational (this would be just before the Windows OS logo displays, I believe), then the server reboots. On the next boot up I am given the diagonstics
    and recovery dialog because the OS failed to boot.
    I believe the failure is the DNS service trying to launch, but because the log files are on the encrypted drive and it has not been unlocked, the system sees this as a security problem and reboots
    Does this make sense? If it does, is there a way to boot 2008 R2 with the DNS service disabled, say with the original install disk in recovery mode?
    Any help would be greatly appreciated as this system cannot be booted in its current state.
    Peter C. Hesse Network/Systems Administrator

    Hi,
    I believe you mean the Active Directory Logs not the DNS logs, because these are necessary to startup a domain controller, because the AD database depends on these logs.
    So if you have AD logs on a different partition and that is encrypted with Bitlocker you could probably automatically unlock it.
    So you did not encrypt OS partition because the server does not have a TPM fully compliant chip ?
    manage-bde /?
    manage-bde -autounlock -enable Driveletter:
    But you have to be able to boot server normal mode I am not sure if the command can be used in DSRM mode.
    Below are some links that might help:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/c52ffc7d-f822-4b61-b633-46f8e04eac80/bitlocker-for-domain-controller
    Hope this helps.
    Regards,
    Calin

  • Firefox 25.0.1 Warn when closing multiple tabs (on) conflicts with "show windows und tabs from last time" (on); need both, but only one or the other works.

    Using Firefox 25.0.1 on Windows 7 Home Premium
    I've poured through support forums for Mozilla Firefox searching for a fix to my initial problem of the "Warn when closing multiple tabs" pop up not popping up when I have it selected.
    Went through About:Config, making sure warnings for tabs und closing, und showing on quit, und quitting, etc. were all set to true, which were "possible" fixes for the issue I was having, there are like five or six things set to true for warnings/quitting/etc. No avail. They are all set to true.
    Then I stumbled across one that suggested a conflict with the "Warn When Closing Multiple Tabs" und the "Show Windows und Tabs from last time".
    I use both features. However, I found if I want the warning pop up for closing multiple tabs, I have to have "show homepage" or "show blank page" selected instead of "Show windows und tabs from last time" selected. (Tools>Options>General>Start Up>When Firefox Starts:) The problem with this is, yes, I get my warning pop up, BUT, I don't get my tabs from my last session.
    The warning in settings (Tools>Options>Tabs>Warn Me When Closing Multiple Tabs) is checked.
    To have my tabs restored from last session, I simply select it for "when firefox starts". Bam, I have my tabs that were open from the last time I quit. Und again, full circle, I don't have my warning pop up.
    There were also suggestions of the warning on close for tabs is conflicting with add-ons.
    However, I don't have many. Und I have yet to test them to see if they interfere. These are according to my Add Ons tab when I check it myself.
    Extensions:
    1. Avast WebRep (disabled)
    2. HP Smart Web Printing (disabled)
    Plugins:
    1. Adobe Acrobat
    2. Google Update
    3. iTunes Application Detector
    4. Java (TM) Platform SE 7 U45
    5. Shockwave Flash
    6. Shockwave For Director
    7. Silverlight Plug-In
    8. VLC Web Plugin
    9. Windows Live Photo Gallery
    10. Java Deployment Toolkit (disabled)
    Note: The Details Firefox provides says I have these for Plugins
    * Shockwave Flash 11.9 r900
    * Adobe Shockwave for Director Netscape plug-in, version 12.0.5.146
    * Next Generation Java Plug-in 10.45.2 for Mozilla browsers
    * Google Update
    * Adobe PDF Plug-In For Firefox and Netscape 11.0.05
    * VLC media player Web Plugin 2.1.0
    * 5.1.20913.0
    * iTunes Detector Plug-in
    * NPWLPG
    Unsure of what the "5.1.20913.0" und the "NPWLPG" plugins are, but they don't appear to me under Add Ons.
    Und as usual, I'm assuming the solution lies within About:Config, I will show here now what I have set to True.
    browser.tabs.warnOnClose - True
    browser.tabs.warnOnCloseOtherTabs - True
    browser.tabs.warnOnOpen - True
    browser.warnOnQuit - True
    browser.showQuitWarning - True
    As aforementioned:
    The seemingly only issue is the conflict between Show Windows/Tabs From Last Time und the Warn On Quit pop up. Und again, I need/want both of them. More so the tabs from the last session, but I really really really really really want the warning.
    So, if anyone knows a work around, preferably without having to download anything to fix this, I would be extremely grateful.

    You mention a second subject.
    ''I'm probably going to downgrade to another version of firefox that was suggested to me since I'm also having issues with shockwave flash causing firefox to hang und ultimately needs to be force closed otherwise having to have flash disabled to use firefox.''
    <u>Downgrading Firefox </u><br />
    Flash is notorious for causing Firefox problems. I suggest you start a new thread about that. If at all possible you should try to avoid downgrading to an unsecure & unsupported version of Firefox. it will increase risks to your system and Personal data. (There are methods of mitigating the risks, using a virtual machine or operating within a secure intranet for instance)
    *(Do Not) [[Install an older version of Firefox]]
    <u>Try Flash with Protected Mode Off</u><br/>
    Worth a try as it takes minimal effort & often solves Flash Problems whilst allowing current and more secure FlashPlayer to be used. See
    * http://kb.mozillazine.org/Flash#Flash_Player_11.3_Protected_Mode_-_Windows
    * http://forums.adobe.com/thread/1018071#TemporaryWorkaround
    If you wish to pursue these subjects further I note you have already started a thread you may as well continue the discussion in that thread, but also post back here so we can follow both.
    * ''Firefox is having "Script" issues (Not Responding) und possibly Flash issues?'' [/questions/978181]
    ** try ensuring you close down Firefox using the menu, that may even help with Flash problems.
    <u>Your experience in submitting troubleshooting information on the forum</u><br />
    (This is out of curiosity, but with the intention of pressing for changes if forum faults are discovered.)
    There are yet more changes to this forum underway. Mozilla recently tried to improve the experience for first time users of the forum and a troubleshooting app option was included in the workflow to try to encourage users to submit full troubleshooting information.
    I would be interested to know what you thought
    I sometimes wonder if users are not trying to use that, or whether forum users run into problems in using it. At one point I wondered whether there was a problem if too much data was included but never actually proved that conjecture.
    Assuming you are using the forum, and not merely replying by email look towards the top in the right hand margin for clickable buttons
    * Question Details -V- More System Details -> [Additional System Details]
    You will note that includes only partial information. There are no changed prefs or extensions listed. Compare for instance the information in this thread [/questions/978130] with full information.
    I believe your mystery plugins are Windows related
    * NPWLPG relates usually to Windows Live Photo Gallery
    * 5.1.20913.0 will be Silverlight

  • Apple Mobile Device Service (AMDS) won't install with iTunes,either V10.7 or V11. The service can't be started b/c the software is not there. Windows 7 with latest service pack. V11 iTunes installs

    Apple Mobile Device Service (AMDS) won't install with iTunes,either V10.7 or V11. The service can't be started b/c the software is not there. Windows 7 with latest service pack. V11 iTunes installs fine, iPod found, no iPhone 5 b/c no AMDS.  Error "insufficient premissions to install AMDS" Tried numerous uninstall / reinstall combinations, installed iTunes as administrator, etc.  Somethings not right. What the Heck ?

    See the following article for dealing with Apple Mobile Device Services: http://support.apple.com/kb/TS1567
    Downloading and installing iTunes will not fix this problem. If the other troubleshooting steps do not work, go to the Control Panel and uninstall iTunes, Apple Mobile Device Services, Quicktime and any other Apple program that might be present. Reboot your computer, then download and install the latest version of iTunes.

  • What Photo Shop version may work with Windows Vista Home Premium (x64) Service Pack 2?

    What Photo Shop version may work with Windows Vista Home Premium (x64) Service Pack 2?

    For the IQ700 series
    If you're running Windows Vista SP2, there is a patch for USB patch for NVIDIA chipsets
    http://support.microsoft.com/kb/975163/ 
    If you're running Windows 7, install this patch
    http://h30434.www3.hp.com/t5/Lockups-Freezes-Hangs/Driver-update-for-Win7-USB-issue-on-nVidia-chipse...
    And only use the driver from the system manufacturer's website or Windows Update. Do not use the latest drivers from NVIDIA's website for the IQ700 series

  • I'm trying to install iCloud on my PC running Windows Vista with Service Pack 2 and I get a message that the set up program is not a valid win32 file.

    I'm trying to install iCloud on my PC running Windows Vista with Service Pack 2 and I get a message that the set up program is not a valid win32 file. Can anyone help me with this?

    What is the exact error message?

  • Hi. I use windows Xp with service pack 3. I have the latest itunes 11.1 installed in it. I am able to add music or apps to my library but not just videos. Please help.

    Hi. I use windows Xp with service pack 3. I have the latest itunes 11.1 installed in it. I own ipad mini. I am able to add music or apps to my library but not just videos. I have already tried removing & reinstalling it. I also have tried with various formats like MPEG, MOV, MP4. Please help.

    I already have what you ( ClayandLonnie ) have suggested with the preferences>Shareing Preferences set to share all.
    I have tried turing it off, and then back on.
    I have tried just sharing specific items and this still did not work.
    I am going to try stepping back down to 11.04.4 as previously suggested by TheDarkCanuck when I get home tomorrow. (maybe saturday).  I am just leary about having to recreate all my libraries and how long that might take.  I have over 1.5 TB of Music and Video, that is why I would like to get it working in the current version.
    Just because I don't have a Mac, it seems that this is not being taken as a real problem for the windows 7 users (maybe it is specific to 64bit).  I may try the 32bit version to see if that fixes it first.  Unless someone else has, and want to chime in.

  • I downloaded the iCloud app to my PC (Windows Vista with Service Pack 2).  But now why I launch the aplication, i'm getting an arror message that says "Unable to launch app due to side-by-side comparison".  What do I need to do?

    I downloaded the iCloud app to my PC (Windows Vista with Service Pack 2).  But when I try to launch the app from the start menu, I'm getting an error message that says "Unable to launch due to side-by-side configuration".  What do I need to do?

    Sounds like a Windows issue.  Google the error message.  There are several discussions on the Microsoft forums listed that may help.

Maybe you are looking for