Windows 7 desktop install - how many portal users at the same time?

If I install spice works on a windows 7 desktop machine that is part of a network,  is there a limit to the number of machines that can simultaneously access the user portal and create a ticket ?
thanks
Dan
This topic first appeared in the Spiceworks Community

Please take a look at:
https://wiki.mozilla.org/Enterprise
The resources section at the bottom may have information you are interested in.

Similar Messages

  • How many EoIP tunnels at the same time? (One Anchor -- HA Pair )

    Hi Experts,
    With AP SSO, there should be two CAPWAP tunnels between an AP and the HA controller pair at the same time. Is it correct?
    Then how many EoIP tunnels between the internet anchor controller and the foreign controller HA pair at the same time?
    Thanks
    Cedar

    Hi Cedar,
    in AP SSO, only single CAPWAP tunnel maintan at a time & see the below reference for details.
    http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080bd3504.shtml
    There is only one CAPWAP tunnel maintained at a time between the APs and the WLC that is in an Active state. The overall goal for the addition of AP SSO support to the Cisco Unified Wireless LAN was to reduce major downtime in wireless networks due to failure conditions that may occur due to box failover or network failover.This allows the access point (AP) to establish a CAPWAP tunnel with the Active WLC and share a mirror copy of the AP database with the Standby WLC. The APs do not go into the Discovery state when the Active WLC fails and the Standby WLC takes over the network as the Active WLC.
    in the same sense, EoIP tunnel limitation will be 71 for a anchor controller. See below
    https://supportforums.cisco.com/thread/2123756
    HTH
    Rasika
    *** Pls rate all useful responses ****

  • How can  I  restrain the user login portal once, in the same time ???

    Hi
    I need to restrain the user can't repeat to login portal ....
    to reduce portal loading
    How can I restrain the user login portal once, in the same time???
    Which attributs in Identity Manager or amconsole I can do it to restrain the user ??
    tks

    Does your portal support anonymous access? If so, make sure you are using the authlessanonymous mode. This mode only creates one session that is shared for all anonymous users. This is much more efficient than anonymous access, which creates a session for each anonymous user.
    I have no other recommendation for limiting users to a single login. In general, web applications do not behave like this. What if a user closes their browser without logging out? Does the user have to wait until the session times out in order to log back in again?
    The same thing is true for users that are mobile. If a user leaves their office without logging out and then attempts to log in with a laptop in the conference room, then access will be denied in your implementation. Users do not expect this type of limitation being built into the system.
    If you are having problems scaling, then you need to look at your architecture and perhaps add some more resources. Also, make sure you are making efficient use of the authlessanonymous access mode as stated above.
    - Jim

  • How to  restrain the user login portal once, in the same time??

    Hi
    I need to restrain the user can't repeat to login portal ....
    to reduce portal loading
    How can I restrain the user login portal once, in the same time???
    Which attributs in Identity Manager or amconsole I can do it to restrain the user ??
    tks

    Does your portal support anonymous access? If so, make sure you are using the authlessanonymous mode. This mode only creates one session that is shared for all anonymous users. This is much more efficient than anonymous access, which creates a session for each anonymous user.
    I have no other recommendation for limiting users to a single login. In general, web applications do not behave like this. What if a user closes their browser without logging out? Does the user have to wait until the session times out in order to log back in again?
    The same thing is true for users that are mobile. If a user leaves their office without logging out and then attempts to log in with a laptop in the conference room, then access will be denied in your implementation. Users do not expect this type of limitation being built into the system.
    If you are having problems scaling, then you need to look at your architecture and perhaps add some more resources. Also, make sure you are making efficient use of the authlessanonymous access mode as stated above.
    - Jim

  • I'm a school tech coordinator. Many computers and many iPads. How many Apple IDs can I have per device, and how many devices can have the same Apple ID? To make my life easier, I'd like 200 devices to all use the same Apple ID.

    I'm a school tech coordinator. I have many computers and many iPads. I apologize if there is a some place that has all the rules governing the use of Apple IDs. I looked, and I even tried to get the answers from multiple Apple rep's. I couldn't find the answers.
    How many Apple IDs can I have per device?
    I want to use the same computer to sync and backup many iOS devices. The iOS devices would be associated with different Apple IDs.
    I may load apps under a school Apple ID and have users load their own apps under thier own ID.
    How many devices can have the same Apple ID?
    Can I use the same Apple ID on all the computers in a lab?
    Can I use the same Apple ID on all iPads for a particular grade level?
    Are the rules different for iOS devices and computers?
    I know that there are limits on "authorize" and "de-authorize" and how frequently those things can be done.
    Recently I heard that for the life of an iOS device, it can only be associated with five Apple IDs. That is not good for a school giving iPads to students in a 1:1
    To make my life easier, I'd like 200 devices to all use the same Apple ID.

    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html
    It would be best to address your questions there, especially since this is a public forum, and over there you could post more private issues with this set-up. Not to mention, getting more official answers.

  • I have itunes on a mac with 2 users but the library only shows on the main user how can both users have the same library?

    i have itunes on a mac with 2 users but the library only shows on the main user how can both users have the same library?

    Hi,
    Have a Look at these Links on Home Sharing:
    http://support.apple.com/kb/HT4620
    http://support.apple.com/kb/HT3819
    Could be what you need...
    Cheers,

  • How many computers can share the same iTunes account?

    How many computers can share the same iTunes account?

    Hello cincip,
    Thanks for the question, and welcome to Apple Support Communities. The following article provides more information on associating multiple computers with your Apple ID:
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/HT4627
    Your Apple ID can have up to 10 devices and computers (combined) associated with it. Each computer must also be authorized using the same Apple ID. Once a device or computer is associated with your Apple ID, you cannot associate that device or computer with another Apple ID for 90 days. You can view which devices or computers are currently associated, remove unused devices or computers, and see how long before they can be associated with a different Apple ID from the Account Information page in iTunes on your computer.
    Thanks,
    Matt M.

  • How you create a group to send many txt msg at the same time?

    How you create a group to send many txt msg at the same time?

    The iPhone does not support groups for messaging. There are apps in the app store which purport to be able to do this.

  • How can i use in the same time input line and mic to recorder in several track whit SONAR

    I have beem recording only input line because SONAR 4 not recognized the mic in, Help me!!!.
    Thank you. Sorry for my english

    LIMACAR wrote:
    How can i use in the same time input line and mic to recorder in several track whit SONAR 4. I have beem recording only input line because SONAR 4 not recognized the mic in, Help me!!!.
    Thank you. Sorry for my english
    Depending on which soundcard you have there, but if your card is capable for
    ASIO -> activate I/O drivers on Sonar/Options/Audio/Drivers -tab (mic/line sources should be listed there --> activate) and select the mic or/and Line sources on tracks "I" - dialog
    WDM/KS -> use the Surround Mixer or windows recording controls for recording source selection (mic should be listed there)
    MME32 - > same w/ WDM/KS
    If you use Asio4All --> same w/ WDM/KS & MME32
    No mic and line source simultaenously w/ WDM/KS and MME32.
    You perhaps be able to do this w/ kX drivers.
    jutapa
    ADDED:
    You can also install modded version of Audigy 2 drivers/software but I have never done this w/ Li've! 5. so I can't be sure if you get ASIO support for your card.
    Here are the instruction --> http://www.tech-pc.co.uk/audigy-2.php
    jutapaMessage Edited by jutapa on 05-25-2006 02:48 PM

  • HT204380 Is there any way to "FaceTime " between 3 or 4 users at the same time?

    Is there any way to "FaceTime " between 3 or 4 users at the same time?

    No. FaceTime is one on one only.

  • CS3 Camera Raw Too Many Files Open at the Same time alert!!!

    Please help me. I keep getting this error message in Camera Raw that says there are too many files open at the same time - but I only have 100 open:( Please help - I was getting this error with CS2 and thought upgrading to CS3 would fix it and it didn't!!!

    > "10 or 100 - you can quickly go through a stack of images in ACR and make any desired changes you want. Whether making the same or similar adjustment to similar files, or making radically different adjustments to different images as appropriate".
    I've done this with far more than 100! I think my maximum is 425 raw files, invoking ACR from Bridge without Photoshop even loaded, and it worked well. (I've also done 115 JPEGs in order to crop them under extreme time constraints).
    It can be very slick. For example, if I use a ColorChecker a number of times in a shoot, it is easy to select just the set (perhaps 100 or so) that a particular ColorChecker shot applies to and set the WB for all of them.
    Furthermore, in case people don't know, you can set ratings on raw images while many of them are open in ACR. (Just click under the thumbnail). It isn't as powerful as Lightroom, but it is not to be dismissed.
    I suspect that it is possible to apply sensor-dust-healing to lots of images in the same way, and certainly it is easy to apply presets based on various selections.
    Perhaps with AMG (Adobe Media Gallery) it will be sensible to use the above capability to process 100s of raw files, then create a set of web pages for the best of them, in not much more time than it would have taken in Lightroom. I judge that Lightroom is the "proper" tool for the job (perhaps after 1.1!), but Bridge+ACR can go a long way.

  • 2 users at the same time ?

    Hi there, i photograph charity functions and do onsite printing, at the moment i use a MBA to preview the photo and then print. What i want to do is use one mac to preview the shot and another to edit and print. Is there a way to do this using Aperture ?
    Thanx in advance

    It is risky to put the Aperture library onto a network volume or to acces it by more than one user at the same time. Aperture is not made for Network access or concurrent access by more than one user. The simplest solution for your problem would be to move your Aperture library to a portable, external disk and plug this drive into the mac you are curently working with.
    The external drive needs to be formatted MacOS X Extended (Journaled) and the "Ignore ownership on this volume" needs to be set.
    The procedure is explained here for an iPhoto Library, but it would be exctly the same for an Aperture library: iPhoto: Sharing libraries among multiple users
    Regards
    Léonie

  • Can i use my mac mini for some users at the same time?

    can i use my mac mini for some users at the same time? i mean with their own screen, mouse, and keyboard

    If you're asking whether more than one user can use the computer at the same time with multiple displays, the answer is no. Other users can log in over a network with Screen Sharing, but each one will need his own computer (not necessarily a Mac.)

  • Need help on making desktop application to web application having individual controls for users at the same time

    Hi,
    I have an desktop application and the following are the functionalities of the same.
    1. User inputs the data file with path (log file) to parse the required data.
    2. Once the user enters the path and starts the tool with start button, the tool parse the required data in terms of records and gives the records (creates output file containing all the useful records).
    3. Have popup window to display a group of data.
    4. Have popup to Plot graph. When a button is pressed in main GUI, the popup is opened giving scroll bar menus to choose the data for the graph. User after selecting the data (multiple Y axis) press another button to plot the graph. The input to this popup is the output file generated by this tool.
    5. The main GUI has buttons (play, step forward, step backward, reverse play, pause, stop, 1st record, last record - like tape recorder buttons) to play the records one by one.
    This application is used by many people and since its a desktop application (created in labview 2009), the user every time has to manually install the newer version.
    "So it is required to make the application into web based so that, the user can individually access the tool at the same time (different instances same as desktop app) and run their own data files from their system. The output files to be stored in the respective user's system."
    Can this be done using Web Publishing or Web Services present in LabView?
    I tried using Web Publishing but it gives control to only one user at a time and loading the files from the client path to run the tool is not possible.

    Simple. 
    If all you are worried about are updates, just put the EXE on a shared network drive and have your users launch it from there.

  • How to support multiple users at the same time?

    Hi all,
    I have a Labview software which controls a analyzer via GPIB connector. When user A is using the software, user B has to wait until A is done. But actually, the analyzer is not very busy, when user A is using the software.
    I want user A, B, C and D can use the software at the same time. just like we can open Multiple websites at the same time.
    How can I program the software, so that the software can be open multiple times? Do you have any example?
    Thanks a lot.
    Steven
    Solved!
    Go to Solution.

    Are all the users going to be measuring the exact same thing from the same instrument?
    It would be possible to write a separate instrument server application that would handle all the direct interactions with the instrument. When one of the users needed to access the instrument, they would gain access to it through this server.
    The big, Big, BIG caveat is that each interaction with the instrument would need to be atomic. In other words each access would need to configure the instrument, initiate the reading, report the results, and then reset the instrument back to some known default value.
    As Dennis said, not a trivial process, but probably do-able...
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Maybe you are looking for