Windows 7 Device Icons

I installed my HP printers on Windows 7 recently and noticed the icons for the printers, plotters, and all in one devices were the same icon (an all in one icon).
Now HP has some great products which is why all of our printers/plotters/all in one machines are HP!
Windows has supplied the basic icons for devices and as nice looking as they are they do not represent the devices very well.
Does HP offer icons so when I open my printers folder I see a plotter or a printer (different types) or a all in one device?

There are some different icons supplied with drivers on some models.  Below is a section of my printers folder showing a number of different printer icons.
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • Windows Folder icon instead of Officejet 6500a Plus E710n icon in Devices and Printers

    Can anyone help me to get the OfficeJet 6500a Plus e710n printer icon to display properly in Devices and Printers?
    I recently reinstalled Windows 8.1.  However, when I installed my printer, instead of the printer icon appearing in Devices and Printers I get a generic yellow Windows folder icon.  The Fax icon is OK, just the printer icon is wrong.
    If I double click on the icon, I get a mostly blank page with a message near the top saying: "Updated information is available about your device.  Click here to download or learn more."  If I click on the notice, a dropdown menu appears with "Download updated information" or "Learn more".  If I choose downloaded update information, a new printer window appears which is mostly blank except for a message at the centre of the window which says, "No tasks are available on this page"  The Learn more option just gives me info about updating drivers.
    The printer icon on the Start menu is fine.
    I've used HP Print and Scan Doctor to uninstall and reinstall my printer but this hasn't helped.  The program found a problem with the printer driver and fixed it, but that hasn't changed the icon either.
    I am running Windows 8.1 Pro 64bit fully up to date, and used the latest full version of the HP installation program for the printer (not the basic version) and HP Print and Scan Doctor v4.6.
    This question was solved.
    View Solution.

    Hi,
    Try following these steps and let me know if that may help:
    From the control Panel select Network and internet and open the Network and Sharing Center.
    Click on Change Advanced Sharing Center.
    Ensure that Network Discovery is trned on but uncheck the box next to "Turn on automatic setup of network connected devices".
    From devices and printer right click the printer and select Remove Device, repeat the for the Fax icon.
    Note: if no such option exists for the printer follow the next steps.
    Right click the background area and select Device Mahager.
    Remove any instance of the printer from Imaging Devices, Printers, Print Queues, Multifunction Adaptors, Other Devices (if a such exists).
    Once you are done the printer should no longer appear under Devices and Printers...
    Open teh HP Officejet 6500 E710 software, select Connect a new Printer and check for any differnce.
    Hope that helps,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How do I get the device icon to show in the itunes  app?

    How do I get the DEVICE icon to appear back in the itunes app as when I plug in my ipod it doesnt show the device icon?

    Hi...
    Help here > iOS: Device not recognized in iTunes for Windows
    Start with restarting the Apple Mobile Device Service first.

  • I used to be able to sync my iphone with itunes, but now when I plug my iphone into my computer it no longer syncs or even shows the device icon.  Could this be because I have an old iphone and it's not compatible with the latest version of itunes?

    I used to be able to sync my iphone with itunes, but now when I plug my iphone into my computer it no longer syncs or even shows the device icon.  Could this be because I have an old iphone and it's not compatible with the latest version of itunes?

    Refer to this article under section 4: Verify that the Apple Mobile Device USB Driver is installed
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • I can not eject my ipod as the device icon no longer shows up

    I can not eject my ipod from Itunes as the device icon no longer shows up in Itunes.  I looked on line but none of the solutions were possible to follow as the various options indicated just weren't there!

    Hello scheherazada,
    Thank you for using Apple Support Communities. 
    Here is an article for you to start with your troubleshooting to get your  iPod recognized. 
    iPod: Appears in Windows but not in iTunes - Apple Support
    Regards,
    Jeff D. 

  • The "pair a device icon" on my desktop is not showing ? How do I make it sow to pair with me Android Samsung s2

    To sync Samsung s2 Android phone with Desktop, the instruction is to go to Firefox home page and click on "pair a device" icon at bottom of page. This icon is not on my home page ? Where is it and how do I get it to show ?

    Hi!
    You can find the same button in the Preferences window if you navigate to the Sync tab. If you don't see that, it's because you haven't configured your Sync account in your computer yet.
    I'm not sure if you have seen this article but it may be helpful for you: [[How do I sync Firefox between my desktop and mobile?]]

  • Devices Icon Unclickable!

    Good evening to all,
    a bit of time the finder of my OS X mountain lion get the following problem:
    When I open the finder and in the sidebar under "Devices" I get my data partition (Mac OS Extended) and any pen drive and I click on, after a while i browse it OR especially when I move to a folder like "Documents "(which is part of the partition MAC), the device icon or PEN DRIVE or both, Device icon in the sidebar becomes gray and i don't click on it.
    At this point, this is tha situation:
    - If I click on the sidebar shortcuts of folders that are on the device (eg. "Clienti" see photo): I can browse it;
    - If then the path bar (which gives me something like: MAC> Volumes> Data> clienti) I click on the Volumes folder is displayed for a second and then refresh the finder window showing the MAC disk root.
    - Plus, if I go directly to the MAC partition I do not see the "Volumes" folder
    Sometimes as a solution to restart the finder (other I must restart my mac) and hope they do it again after a few hours (usually it is) and not after 10minutes ...
    1000 Thanks to those who help me

    Try deleting the com.apple.finder.plist
    You need to look in your user Library/Preferences for the .plist. Either hold down the option key while using the Finder “Go To Folder” command and select your user Library in your home folder or use the Finder “Go To Folder” command and enter ~/Library/Preferences/com.apple.finder.plist.  Move the .plist to your desktop.
    Re-launch Finder by loggin out/in and test. If it works okay, delete the plist from the desktop.
    If the same, return the .plist to where you got it from, overwriting the newer ones.
    If you prefer to make your User library permanently visible, use the Terminal command found below.
    Show User Library
    You might want to bookmark the command. I had to use it again after I installed 10.8.5. I have also been informed that if you drag the user library to Finder it will remain visible.

  • TS4022 Device icon in itunes sidebar

    Just got a message from Amazon does anyone have a clue as to what they're talking about?  Device icon in itunes sidebar.

    I'm new to this as well. I've had to consume a beer over my last encounter. Here we go:
    Launch iTunes.
    Check for iTunes update-VERY IMPORTANT!!!
    Hook up your iPod.
    iPod will automatically come to life and reveal a red circle with a line through it and it will read, "Do Not Disconnect."
    Depending on how fast your computer is, eventually a new screen will launch showing a picture of your iPod.
    At the very top of the screen, iTunes will tell you that it's synching with your iPod and to not disconnect.
    Near the top of the screen you will notice several tabs.
    The first tab is where you can select how you want your iPod to respond each time it is connected to your computer.
    At this time you should notice a miniature iPod to the left, where your folders are located, and in the middle of the screen. This icon should remain, however, on several occasions it has disappeared on me. This was fixed by ejecting the iPod and then connecting it again. There is an Eject iPod function and it is located on the lower right of the screen.
    Other tips:
    Most of friends have selected the option to manually manage downloading of tunes.
    Take the time to review all the options (each tab)regarding how you want your iPod to respond to iTunes.
    Dell   Windows XP  
    Dell   Windows XP  
    Dell   Windows XP  

  • What happened to my device icons?

    I have two external drives connected to my iMac, and when I am at the iMac I have a Flash Drive attached. When you open a window they appeared on the left side under the word "Devices" along with Macintosh HD. Well, they have disappeared. (see images below, the first shows I have three devices attached, the second shows an open window and nothing is listed under devices) And since they disappeared when I do a search it doesn't seem to search the external drives, it is like they are not there. What happened to my device icons? Before, I could just click on the right-pointing arrow next to the icon for my Flash Drive and it would expel it. I can drag the Flash Drive icon to the Trash, but I am wondering if there is something really sinister going on in my iMac. It's a 6 month old iMac running Yosemite.

    It looks like the Devices section in your sidebar is hidden. Place your cursor over the "Devices" text in the Finder sidebar. You should see just to the right of the text the word "Show". Click Show and the Devices should reappear in your sidebar.
    Tom

  • Figuring out how to access a device using Windows.Devices.HumanInterfaceDevice?

    Before I start, I would like to share this link I used to access windows RT libraries from Desktop applications (only the ones stated in MSDN documentation that are accessible from desktop applications):
    http://blogs.msdn.com/b/cdndevs/archive/2013/10/02/using-windows-8-winrt-apis-in-net-desktop-applications.aspx .
    After following the above instructions you can import some of the windows RT libraries in references. I have been trying to use the Windows.Devices.HumanInterfaceDevice library. I think my UsagePage and UsageId are off though. I am wondering
    if someone good in hex can translate them from my report descriptor. I already have the VID and PID (this should be enough along with the path if I called write file or some of the other win32/OS api's). Here's the code I am using in VB.NET:
    Public Class VirtualMouseDeviceOpen
    Class Enumeration
    ' Enumerate HID devices
    Public Async Function EnumerateHidDevices() As Task
    Dim vendorId As UInt32 = &HBEEF
    Dim productId As UInt32 = &HFEED
    Dim usagePage As UInt32 = &HFF
    Dim usageId As UInt32 = &H1
    ' Create a selector that gets a HID device using VID/PID and a
    ' VendorDefined usage
    Dim selector As String = HidDevice.GetDeviceSelector(usagePage, usageId, vendorId, productId)
    ' Enumerate devices using the selector
    Dim devices As Windows.Foundation.IAsyncOperation(Of Windows.Devices.Enumeration.DeviceInformationCollection) = DeviceInformation.FindAllAsync(selector)
    Dim count As Integer = devices.GetResults.Count
    If count > 0 Then
    ' Open the target HID device
    ' At this point the device is available to communicate with
    ' So we can send/receive HID reports from it or
    ' query it for control descriptions
    Dim device As HidDevice = HidDevice.FromIdAsync(devices.GetResults.ElementAt(0).Id, FileAccessMode.ReadWrite)
    Await Vendor.ReadWriteToHidDevice(device)
    Else
    ' There were no HID devices that met the selector criteria
    MsgBox("MUTT HID device not found!", MsgBoxStyle.Exclamation)
    End If
    End Function
    Class Vendor
    Public Shared Async Function ReadWriteToHidDevice(device As HidDevice) As Task
    If device IsNot Nothing Then
    ' construct a HID output report to send to the device
    Dim outReport As HidOutputReport = device.CreateOutputReport()
    ' Initialize the data buffer and fill it in
    Dim buffer As Byte() = New Byte() {10, 20, 30, 40}
    Dim dataWriter As New DataWriter()
    dataWriter.WriteBytes(buffer)
    outReport.Data = dataWriter.DetachBuffer()
    ' Send the output report asynchronously
    Dim a As Windows.Foundation.IAsyncOperation(Of UInteger) = device.SendOutputReportAsync(outReport)
    ' Sent output report successfully
    ' Now lets try read an input report
    Dim inReport As HidInputReport = device.GetInputReportAsync()
    If inReport IsNot Nothing Then
    Dim id As UInt16 = inReport.Id
    Dim bytes = New Byte(3) {}
    Dim dataReader__1 As DataReader = DataReader.FromBuffer(inReport.Data)
    dataReader__1.ReadBytes(bytes)
    Else
    MsgBox("Invalid input report received")
    End If
    Else
    MsgBox("device is NULL")
    End If
    End Function
    End Class
    End Class
    Here's my report descriptor to avoid scrimmaging through everything trying to find it:
    HID_REPORT_DESCRIPTOR G_DefaultReportDescriptor[] = {
    0x06,0x00, 0xFF, // USAGE_PAGE (Vender Defined Usage Page)
    0x09,0x01, // USAGE (Vendor Usage 0x01)
    0xA1,0x01, // COLLECTION (Application)
    0x85,CONTROL_FEATURE_REPORT_ID, // REPORT_ID (1)
    0x09,0x01, // USAGE (Vendor Usage 0x01)
    0x15,0x00, // LOGICAL_MINIMUM(0)
    0x26,0xff, 0x00, // LOGICAL_MAXIMUM(255)
    0x75,0x08, // REPORT_SIZE (0x08)
    //0x95,FEATURE_REPORT_SIZE_CB, // REPORT_COUNT
    0x96,(FEATURE_REPORT_SIZE_CB & 0xff), (FEATURE_REPORT_SIZE_CB >> 8), // REPORT_COUNT
    0xB1,0x00, // FEATURE (Data,Ary,Abs)
    0x09,0x01, // USAGE (Vendor Usage 0x01)
    0x75,0x08, // REPORT_SIZE (0x08)
    //0x95,INPUT_REPORT_SIZE_CB, // REPORT_COUNT
    0x96,(INPUT_REPORT_SIZE_CB & 0xff), (INPUT_REPORT_SIZE_CB >> 8), // REPORT_COUNT
    0x81,0x00, // INPUT (Data,Ary,Abs)
    0x09,0x01, // USAGE (Vendor Usage 0x01)
    0x75,0x08, // REPORT_SIZE (0x08)
    //0x95,OUTPUT_REPORT_SIZE_CB, // REPORT_COUNT
    0x96,(OUTPUT_REPORT_SIZE_CB & 0xff), (OUTPUT_REPORT_SIZE_CB >> 8), // REPORT_COUNT
    0x91,0x00, // OUTPUT (Data,Ary,Abs)
    0xC0, // END_COLLECTION
    0x05, 0x01, // USAGE_PAGE (Generic Desktop)
    0x09, 0x02, // USAGE (Mouse)
    0xa1, 0x01, // COLLECTION (Application)
    0x85, 0x02, // REPORT_ID (2)
    0x09, 0x01, // USAGE (Pointer)
    0xa1, 0x00, // COLLECTION (Physical)
    0x05, 0x09, // USAGE_PAGE (Button)
    0x19, 0x01, // USAGE_MINIMUM (Button 1)
    0x29, 0x03, // USAGE_MAXIMUM (Button 3)
    0x15, 0x00, // LOGICAL_MINIMUM (0)
    0x25, 0x01, // LOGICAL_MAXIMUM (1)
    0x95, 0x03, // REPORT_COUNT (3)
    0x75, 0x01, // REPORT_SIZE (1)
    0x81, 0x02, // INPUT (Data,Var,Abs)
    0x95, 0x01, // REPORT_COUNT (1)
    0x75, 0x05, // REPORT_SIZE (5)
    0x81, 0x03, // INPUT (Cnst,Var,Abs)
    0x05, 0x01, // USAGE_PAGE (Generic Desktop)
    0x09, 0x30, // USAGE (X)
    0x09, 0x31, // USAGE (Y)
    0x15, 0x81, // LOGICAL_MINIMUM (-127)
    0x25, 0x7f, // LOGICAL_MAXIMUM (127)
    0x75, 0x08, // REPORT_SIZE (8)
    0x95, 0x02, // REPORT_COUNT (2)
    0x81, 0x06, // INPUT (Data,Var,Rel)
    0xc0, // END_COLLECTION
    0xc0 // END_COLLECTION
    My UsageId is the first Usage Hex value in the report descriptor I believe (I am still a little confused too). My UsagePage is the hex values in the first Usage_Page in the report descriptor.
    Note: the problem with the VB.NET code is that it returns 0 on the count above which means it did not find a device using my criteria.
    Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth. - Sherlock Holmes. speak softly and carry a big stick - theodore roosevelt. Fear leads to anger, anger leads to hate, hate leads to suffering - Yoda. Blog -
    http://www.computerprofessions.us

    Before I start, I would like to share this link I used to access windows RT libraries from Desktop applications (only the ones stated in MSDN documentation that are accessible from desktop applications):
    http://blogs.msdn.com/b/cdndevs/archive/2013/10/02/using-windows-8-winrt-apis-in-net-desktop-applications.aspx .
    After following the above instructions you can import some of the windows RT libraries in references. I have been trying to use the Windows.Devices.HumanInterfaceDevice library. I think my UsagePage and UsageId are off though. I am wondering
    if someone good in hex can translate them from my report descriptor. I already have the VID and PID (this should be enough along with the path if I called write file or some of the other win32/OS api's). Here's the code I am using in VB.NET:
    Public Class VirtualMouseDeviceOpen
    Class Enumeration
    ' Enumerate HID devices
    Public Async Function EnumerateHidDevices() As Task
    Dim vendorId As UInt32 = &HBEEF
    Dim productId As UInt32 = &HFEED
    Dim usagePage As UInt32 = &HFF
    Dim usageId As UInt32 = &H1
    ' Create a selector that gets a HID device using VID/PID and a
    ' VendorDefined usage
    Dim selector As String = HidDevice.GetDeviceSelector(usagePage, usageId, vendorId, productId)
    ' Enumerate devices using the selector
    Dim devices As Windows.Foundation.IAsyncOperation(Of Windows.Devices.Enumeration.DeviceInformationCollection) = DeviceInformation.FindAllAsync(selector)
    Dim count As Integer = devices.GetResults.Count
    If count > 0 Then
    ' Open the target HID device
    ' At this point the device is available to communicate with
    ' So we can send/receive HID reports from it or
    ' query it for control descriptions
    Dim device As HidDevice = HidDevice.FromIdAsync(devices.GetResults.ElementAt(0).Id, FileAccessMode.ReadWrite)
    Await Vendor.ReadWriteToHidDevice(device)
    Else
    ' There were no HID devices that met the selector criteria
    MsgBox("MUTT HID device not found!", MsgBoxStyle.Exclamation)
    End If
    End Function
    Class Vendor
    Public Shared Async Function ReadWriteToHidDevice(device As HidDevice) As Task
    If device IsNot Nothing Then
    ' construct a HID output report to send to the device
    Dim outReport As HidOutputReport = device.CreateOutputReport()
    ' Initialize the data buffer and fill it in
    Dim buffer As Byte() = New Byte() {10, 20, 30, 40}
    Dim dataWriter As New DataWriter()
    dataWriter.WriteBytes(buffer)
    outReport.Data = dataWriter.DetachBuffer()
    ' Send the output report asynchronously
    Dim a As Windows.Foundation.IAsyncOperation(Of UInteger) = device.SendOutputReportAsync(outReport)
    ' Sent output report successfully
    ' Now lets try read an input report
    Dim inReport As HidInputReport = device.GetInputReportAsync()
    If inReport IsNot Nothing Then
    Dim id As UInt16 = inReport.Id
    Dim bytes = New Byte(3) {}
    Dim dataReader__1 As DataReader = DataReader.FromBuffer(inReport.Data)
    dataReader__1.ReadBytes(bytes)
    Else
    MsgBox("Invalid input report received")
    End If
    Else
    MsgBox("device is NULL")
    End If
    End Function
    End Class
    End Class
    Here's my report descriptor to avoid scrimmaging through everything trying to find it:
    HID_REPORT_DESCRIPTOR G_DefaultReportDescriptor[] = {
    0x06,0x00, 0xFF, // USAGE_PAGE (Vender Defined Usage Page)
    0x09,0x01, // USAGE (Vendor Usage 0x01)
    0xA1,0x01, // COLLECTION (Application)
    0x85,CONTROL_FEATURE_REPORT_ID, // REPORT_ID (1)
    0x09,0x01, // USAGE (Vendor Usage 0x01)
    0x15,0x00, // LOGICAL_MINIMUM(0)
    0x26,0xff, 0x00, // LOGICAL_MAXIMUM(255)
    0x75,0x08, // REPORT_SIZE (0x08)
    //0x95,FEATURE_REPORT_SIZE_CB, // REPORT_COUNT
    0x96,(FEATURE_REPORT_SIZE_CB & 0xff), (FEATURE_REPORT_SIZE_CB >> 8), // REPORT_COUNT
    0xB1,0x00, // FEATURE (Data,Ary,Abs)
    0x09,0x01, // USAGE (Vendor Usage 0x01)
    0x75,0x08, // REPORT_SIZE (0x08)
    //0x95,INPUT_REPORT_SIZE_CB, // REPORT_COUNT
    0x96,(INPUT_REPORT_SIZE_CB & 0xff), (INPUT_REPORT_SIZE_CB >> 8), // REPORT_COUNT
    0x81,0x00, // INPUT (Data,Ary,Abs)
    0x09,0x01, // USAGE (Vendor Usage 0x01)
    0x75,0x08, // REPORT_SIZE (0x08)
    //0x95,OUTPUT_REPORT_SIZE_CB, // REPORT_COUNT
    0x96,(OUTPUT_REPORT_SIZE_CB & 0xff), (OUTPUT_REPORT_SIZE_CB >> 8), // REPORT_COUNT
    0x91,0x00, // OUTPUT (Data,Ary,Abs)
    0xC0, // END_COLLECTION
    0x05, 0x01, // USAGE_PAGE (Generic Desktop)
    0x09, 0x02, // USAGE (Mouse)
    0xa1, 0x01, // COLLECTION (Application)
    0x85, 0x02, // REPORT_ID (2)
    0x09, 0x01, // USAGE (Pointer)
    0xa1, 0x00, // COLLECTION (Physical)
    0x05, 0x09, // USAGE_PAGE (Button)
    0x19, 0x01, // USAGE_MINIMUM (Button 1)
    0x29, 0x03, // USAGE_MAXIMUM (Button 3)
    0x15, 0x00, // LOGICAL_MINIMUM (0)
    0x25, 0x01, // LOGICAL_MAXIMUM (1)
    0x95, 0x03, // REPORT_COUNT (3)
    0x75, 0x01, // REPORT_SIZE (1)
    0x81, 0x02, // INPUT (Data,Var,Abs)
    0x95, 0x01, // REPORT_COUNT (1)
    0x75, 0x05, // REPORT_SIZE (5)
    0x81, 0x03, // INPUT (Cnst,Var,Abs)
    0x05, 0x01, // USAGE_PAGE (Generic Desktop)
    0x09, 0x30, // USAGE (X)
    0x09, 0x31, // USAGE (Y)
    0x15, 0x81, // LOGICAL_MINIMUM (-127)
    0x25, 0x7f, // LOGICAL_MAXIMUM (127)
    0x75, 0x08, // REPORT_SIZE (8)
    0x95, 0x02, // REPORT_COUNT (2)
    0x81, 0x06, // INPUT (Data,Var,Rel)
    0xc0, // END_COLLECTION
    0xc0 // END_COLLECTION
    My UsageId is the first Usage Hex value in the report descriptor I believe (I am still a little confused too). My UsagePage is the hex values in the first Usage_Page in the report descriptor.
    Note: the problem with the VB.NET code is that it returns 0 on the count above which means it did not find a device using my criteria.
    Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth. - Sherlock Holmes. speak softly and carry a big stick - theodore roosevelt. Fear leads to anger, anger leads to hate, hate leads to suffering - Yoda. Blog -
    http://www.computerprofessions.us
    I forgot anyone wanting a picture of what the device hierarchy looks like in control panel here it is (HID compliant vendor device is the first one in the report descriptor above I want to access and then the mouse device): 
    Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth. - Sherlock Holmes. speak softly and carry a big stick - theodore roosevelt. Fear leads to anger, anger leads to hate, hate leads to suffering - Yoda. Blog -
    http://www.computerprofessions.us

  • In iTunes the iPhone device icon will not show up whenever I plug in a USB into my PC but the iPhone icon will show up in 'This PC'  so if anyone who knows a resolution to my problem with my iTunes or PC,it would really help me.I need at least Help or Tip

    In iTunes the iPhone device icon will not show up whenever I plug in a USB into my PC but the iPhone icon will show up in 'This PC'  so if anyone who knows a resolution to my problem with my iTunes or PC,it would really help me.I need at least Help or some Tips.I have already tried many things to iTunes and my PC like trying to restore my PC but that do anything.Also,would it be fine if i contacted (call) Apple Support? Please,I need help because what I think is wrong is my PC,iPhone,or USB might be messed up so if anyone could help me with this,it would be really helpful and for anyone to be nice enough to help me.

    I think this article will help you.

  • I switched my iPod Nano from a PC to my macbook air. The info and iTunes still shows it as a windows device, just want to confirm that is ok. Next issue, which is, as usual, my wrongdoing. When I locked my iPod it used to show the time, pls advise

    Hello to my always excellent community who always gives me the right answers. I switched my iPod Nano library from my PC to my new macbook air with the help of an excellent and courteous gentleman. The info on my Ipod and on iTunes still shows my Ipod Nano as a windows device, just want to confirm that is ok.  Next issue, which is, as usual, is prob my wrongdoing. When I locked my iPod it used to show the time of day, don't even know how I got it to do that and can't remember if it stopped doing so before or after the swith. Can anyone please advise or help? I hope Thank you and if you do reply, thank you in advance for my lack of tech terms and look at my username

    I see that there are a lot of views and no replies, so it's clearly a user issue...SHOCKER!!!
    In trying to figure out the above; I stumbled upon the link below which taught me how to change/update my iPod Nano to show Version 1.0.2. Mac rather than the windows version 1.x.xPC it was still showing after I transferred my itunes library from my old pc to my new macbook air......I didn't dowlnload the iPod updater 2006-06-28 for Mac and once I did....whoa!!! I got my calendar and reminders on my nano now it's like a new toy all over again, just follow the steps in the below article, if I can do it, a 2 year old can
    http://support.apple.com/kb/HT1339?viewlocale=en_US&locale=en_US

  • How to develop 64-bit Windows device driver for NI-6602?

    Due to the fact that NI-VISA doesn’t support 64 bit Windows, how can I do to develop a 64 bit Windows device driver for NI 6602 (Counter/timer) PCI card. The possible jobs include:
    Develop a Windows Kernel Mode Driver (“Device Driver”);
    Make it to comply with VISA in order to utilize “osiBus Generic IO Interface” and MH DDK.
    Could anyone please give me some advices as soon as possible?
    William Liao
    Message Edited by Wiliao on 07-22-2005 04:12 PM

    Hi All,
    I am currently working on getting the health parameters
    from the motherboard like voltage fan and temperature. I have already
    already done this using 32 bit winio driver but i am not able to work
    on 64 bit version. is there any driver availbale in 64 bit for
    obtaining this parametes or some one help me to get a 64 bit winio
    driver.
    Regards,
    Senthil prabu R

  • Using the Kobo App for reading FXL on Android and Windows devices?

    Hi, I am just finishing transferring my iPad App into a FXL ebook so I can get it out to a wider audience now that this technology is available, but I have so far only tested it on a Mac with both the iBooks and Kobo Apps. I also tested with Adobe Digital Editions, but this seems to have a bit of a bug when you use a button to click to another page the new page appears zoomed in and cropped off!
    Has anyone tested FXL on the Kobo App on a Android and/or Windows device, tablet, smartphone, laptop etc and if so does it work the same as on the OS Mac version?
    Cheers
    Gia

    Thanks for sharing this.
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • My iPad 3 does not show in ITunes at all. There is no Devices icon showing either.

    My iPad 3 does not show in ITunes at all. There is no Devices icon showing either.

    stepbro wrote:
    ... I installed MacKeeper yesterday could this be the issue?
    Get Rid of that Software... it is Not Needed... and likely the cause of your issue.
    See Here  >  Beware MacKeeper
    Uninstall MacKeeper here
    http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/

  • After downloading latest Reader software (11) on my Mac (OS10.7.5) I cannot print pdf files on either of my two printers. How do I uninstall and reinstall the software?  Adobe's instructions are only for Window devices.

    After downloading latest Reader software (11) on my Mac (OS10.7.5) I cannot print pdf files on either of my two printers. I suspect corrupt software.  How do I uninstall and reinstall the software?  Adobe's on-line instructions are only for Window devices.

    You can just drag the file to the trash. If you want you can remove  the pdf plug-in from the internet-plug in folder, but that should not be necessary to correct your problem.

Maybe you are looking for