Windows 7 dident detect drivers

Hi
I installed windows 7 on macbook pro  with bootcamp/in macbook pro package not usb or dvd
After install windows 7 i download & install bootcamp ver 3,3.1,3.2,3,3(new version) but it dident detect vga,sound,lan and wifi
Please tellme where can i download this driver
Version my mac is osx lion 10.7.2 uptodate
Thanks

Hi: Try the W7 32 bit drivers and software from the HP Probook 450 G2 except the BIOS and firmware files. http://h20566.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=6943827&swLangOid=8&swEnvOid=4053 

Similar Messages

  • Windows 8 Detects Audio But I don't hear any sound.

    Hi, I have an HP Pavillion 500-314 running windows 8.1. Yesterday all sound stopped working though windows still detects sound in the control panel and device manager.
    I've tried system restore and uninstallilng/reinstalling the audio drivers. This isn't an issue with the speakers because I've tested them and there is no audio from headphones either.
    If anyone has a suggesstion to fix this problem it would be much appreciated.
    Thank you!
    CW

    Dear Customer,
    Welcome and thank you for posting your query on HP Support Forum.
     Request you to please update the graphic driver, please uninstall the graphic drivers first from the device manager and the control panel and then download the latest drivers and reinstall them along with the chipset drivers.
    Below mentioned is the link for the Nvidia graphic drivers, please click on the sp66394.exe and download the file.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-132285-1&cc=us&dlc=en&lc=en...
    For AMD Graphic drivers please click on the link below
    http://ftp.hp.com/pub/softpaq/sp66001-66500/sp66392.exe
    For Intel please click on this below link.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-132034-1&cc=us&dlc=en&lc=en...
    Also please update the chipset driver, please click on this below link
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-134902-1&cc=us&dlc=en&lc=en...
    I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
    Hope this helps, for any further queries please reply to the post and feel free to join us again.
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    SJ_Bradley
    I am an HP Employee.

  • Windows doesnt detect SoundBlaster wireless tactic 3d v2.0

    Hello
    Even though I said in the title that windows doesnt detect it that isnt entirely correct but it would have cluttered the title even further so today I bought this headset and im trying to get it to work so a few informations would help:
    I use windows 64 bit windows 7 home edition
    The wireless adapter and the headset have no problem conecting to each other, I also hear a little ding in those headsets once the connection is established, by either restarting the pc, plugging the wireless connecter off and on again or pressing a couple of seconds on the connect or the mute button.
    In the auto updater from creative I can see both the headset and the adapter and it says that all drivers are uptodate.
    Now to the problems:
    In the device manager off windows I can see the SB Tactic 3D Rage Wireless however it has an exclamation mark next to it, but trying to update the driver there tells me it is already updated.
    I do not see the headset in the windows audiosettings, however if I use a different headset and change the volume with the wireless one the volume does change(of cause of the other headset, the wireless one never plays any sounds besides the connection and the sound change)
    Hope someone could help me there, the headset feels quite nice would be great if it would work

    Im sorry but trying to edit main post seems to not work when I try to click on save nothing happens :/ so heres an update:
    so apparently it now tells me that 100.84 mb of drivers are missing I assume thats almost all of them, without me touching anything related to headsets in the meanwhile, I had that happen before so I doubt that reinstalling the drivers will help but Im going to do that later anyway - however I will have to do it manually because if I press accept on the liscence agreement it sends me to an empty Internet explorer page(which is not my main browser)

  • My iPod Classic is not detected by my Windows 8 computer when I connect it via USB port.  How can I get windows to detect this device?

    My iPod Classic is not detected by my Windows 8 computer when I connect it via USB port.  How can I get windows to detect this device?  A message from windows says: the device has malfunctioned.

    Try TS1363: iPod: Appears in Windows but not in iTunes.
    See also Corrupt iPod classic.
    tt2

  • Adding Windows 7 x64 drivers to Windows Server 2003 printserver

    Hello,
    I've recently added a HP Elitebook 8530W running Windows 7 64 bit, to a network containing only 32 bit systems.
    It's all working fine except I cannot get the printer, a HP Laserjet 4345MX, shared via a HP ML350 server running Windows Server 2003 SP2, working on it.
    I have downloaded the appropriate Windows 7 x64 drivers from the HP website (the PCL6 v5.2 package) and tried adding these on the server (through printer properties, sharing, additional drivers, under the x64 box), but it is refusing to accept these drivers (I've tried every .inf in the package).
    If anyone could offer any advice on how to get this setup working that'd be great, thanks
    Marijn

    Hello,
    I've recently added a HP Elitebook 8530W running Windows 7 64 bit, to a network containing only 32 bit systems.
    It's all working fine except I cannot get the printer, a HP Laserjet 4345MX, shared via a HP ML350 server running Windows Server 2003 SP2, working on it.
    I have downloaded the appropriate Windows 7 x64 drivers from the HP website (the PCL6 v5.2 package) and tried adding these on the server (through printer properties, sharing, additional drivers, under the x64 box), but it is refusing to accept these drivers (I've tried every .inf in the package).
    If anyone could offer any advice on how to get this setup working that'd be great, thanks
    Marijn

  • Windows 8 64bit drivers msi GX600 aka msi-163A

    After so many long hours searching for, trying and reinstalling Windows 8 Pro 64Bit I finally found all Windows 8 64Bit drivers for msi GX600 aka msi-163A.
    As this is old model and do not have official support I decided to share driver links to help everybody else.
    My system is: msi GX600-PX from 2008 turbo version aka msi-163A with following spec:
    BIOS: v1.12
    Motherboard: Intel PM965
    CPU: Core 2 Duo T8100 (Penryn)
    GPU: Nvidia Geforce 8600M GT
    Memory: 4GB DDR2 (upgrade from 3GB DDR2)
    Drivers:
    Agere Modem
    Description N/A Version 2.2.98.0 Type Modem Release Date 2010-07-01
    OS Win7 64
    Download md_agere_2.2.98_al00.zip (http://www.msi.com/service/download/nbdriver-15441.html) File Size 1.45 MB
    msi Bluetooth_6837D
    Description N/A Version 7.10.01 Type Bluetooth Release Date 2010-05-19
    OS Win7 64
    Download bt_6837d_7.10.01_w700.zip (http://www.msi.com/service/download/nbdriver-15384.html) File Size 73.52 MB
    System Control Manager (SCM)
    Description System Control Manager
    Version 2.209.1106.005.10 Type Utility Release Date 2009-11-23
    OS Win7 64, Win7 32, XP 32
    Download scm_vx7_nb.zip (http://www.msi.com/service/download/utility-11559.html) File Size 5.41 MB
    ENE CIR Driver
    Description ENE CIR Driver Version 3.1 Type Driver Release Date  2009-11-04 OS Win7 64, Win7 32
    Download 6657_enecir_release_v3_1_win7.zip (http://www.msi.com/service/download/driver-11779.html) File Size 0.75 MB
    RICOH Card Reader
    Description RICOH Card Reader Version 3.62.02 Type Card Reader Release Date 2009-07-10
    OS Win7 64, Win7 32
    Download http://dlsvr04.asus.com/pub/ASUS/nb/Drivers/Cardreader/CardReader_Ricoh_WIN7_32_WIN7_64_36202.zip File Size 4.10 MB
    Nvidia GPU 8600M GT
    Description GPU Driver Version 257.41 Type Microsoft WHQL Driver Release Date 07/12/2010, 8.17.12.5741
    OS Windows Vista / Windows 7 x86 (32-bit)
    Download http://download.windowsupdate.com/msdownload/update/driver/drvs/2010/07/20367486_2b4825f23573cc5aa3f88e4709b610e39f8283f0.cab File Size 125 MB
    Windows Vista / Windows 7 x64 (64-bit)
    Download http://download.windowsupdate.com/msdownload/update/driver/drvs/2010/07/20367487_ec2b1ff7583e06ca7fe70161c0ad9be0e549583f.cab File Size 170 MB
    Courtesy of user: justinkw1 from guru3d forum   http://forums.guru3d.com/showthread.php?t=325912
    Realtek LAN
    Description LAN driver Version 8.003.0730 Type LAN Release Date 01/07/2012
    OS Win 8 64bit, Win 8 32bit
    Download http://www.realtek.cz/realtek-download.php?realtek=RTL8168C_8111C&system=8 File size 5.58 MB
    Realtek HD Audio ALC888
    Description Audio Type Driver Release Date 14/01/2013
    OS Win 8 64bit, Win 8 32bit
    Download http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=22412&lang=eng&OSVersion=Windows%208%2C%2064-bit*&DownloadType=Drivers File Size 136.21 MB
    Intel Chipset
    Description Device Software Version 9.3.0.1026 Realise Date 02/11/2012
    OS Win 8 64bit, Win 8 32bit
    Download http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=20775&keyword=Intel+Device+Software&lang=eng File Size 4.73 MB
    Intel PRO/Wireless 3945ABG
    Description Wireless Internet Connection Version 15.3.1 Realise date 15/11/2012
    OS Win7 64bit, Win7 32bit
    Download http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=22116&lang=eng&OSVersion=Windows%207%20(64-bit)*&DownloadType=Software%20Applications
    Next post: Knowing Issues

    Knowing issues:
    1. Hips of NVidia drivers having issues with brightness or not recognising all graphic cards.
    I found that only above mention version working with this laptop / graphic card. I had tried few versions from 178 to 306.97, regular, with WHQL and with moded inf and neither worked.
    With generic basic adapter brightness and turning off screen by system working flawless, but you have just basic 2D functions. When you install version 257.41 driver working properly, you get all options and brightness working. However, diming and turning off screen by system not working.
    Simple fix is to disable 'Generic PnP Monitor' in Device Manager. With this fix you are getting automatic turning off monitor by system, but losing brightness adjustment option.
    My preferred option is with disabled 'Generic PnP Monitor'. Before disabling I had setup brightness for all power options to suit my needs and then I disabled 'Generic PnP Monitor'.
    If I need to change brightness it is enough to enable 'Generic PnP Monitor' in Device Manager.
    2. Turbo button and all function keys working correctly with and without installed SCM, except for brightness if you have disabled 'Generic PnP Monitor'.
    3. If you decide not to install SCM as I, than you can use application 'KeyTweak' to assign any action to 'P1' button.

  • Windows 8.1 drivers for dv6-6053ea

    At the moment i am using windows 7 and the drivers i need are only from HP which are from 2011 only for windows 7. So i was wondering can i find drivers for windows 8.1 and will they work? The main problem is graphics driver.. i can only use the one HP has made and when i download a driver from AMD site i can't install it. So i was thinking maybe when i install windows 8.1 i can find a newer driver that works. 
    This question was solved.
    View Solution.

    HP does not have Windows 8.1 drivers posted for your model but we can find drivers for you and yes, you will be able to use AMD drivers from their site for the video. 

  • Bootcamp Windows 7 (64) Drivers

    After 2 days of struggling to find the right way to install Window 7's drivers properly I'm out of ideas. I've installed Windows 7 now twice with no issue, it just seems I can't get a single driver to work for me. I'll list the specs of my computer and then list what I've done in order to see what else we can do.
    Late 2012 MacBook Pro 13-Inch
    OSX V. 10.8.2 (Mountain Lion)
    2.5 Intel i5
    4 GB DDR 3
    And what I've done
    1. BCA Windows Support Software download to CD/DVD or Drive (multiple times) with NO luck. My error message reads "Can't install Windows Support Software" every. single. time.
    2. Tried an original retail download of Snow Leopard on Windows 7. This got me the furtherest, as it installed Boot Camp 3.1 but nothing else. While the installation lead me to believe it installed all the necessary drivers, Device manager tells me differently. No drivers were installed, regardless of what the install setup bars may have stated.
    3. Pulled various different Bootcamp Update Patches from the downloads section in hopes something might give. Trying 2.0, 3.1, 3.2, 3.3, and 4.0, I still have had no success. Most of these attempts consisted of "corrupt file" errors or "This is just a patch install, not the full blow support software" message. 2.0 and 3.1 did install, however no drivers installed during setup or manually.
    4. Frustrated at the fact not one driver installed, I'd hope to find an up to date Broadcom network driver to install some where online. After digging through forums, I found one. Downloaded the most up to date driver, (I took 2 other broadcom drivers below it just in case), installed the driver, and proceeded to verify. The driver did install correctly this time around yet once my password for my network went through I was prompted with a message stating "Windows can not connect to the network". After reading MORE forums, I was lead to believe this might be the wrong driver.
    So how is I actually get the right driver? or the right support software for that matter? I'm truly exhausted after working on this for 10+ for 2 days straight, hoping to have this up and running so I can get back to work. At this point, I'd take a simple ethernet driver so that I can hardwire into the comp for the moment in hopes that Windows Update will pull the drivers through.
    Thanks in advanced

    Read and follow the Bootcamp Installation Manual. It is the first option when you run Bootcamp Assistant. After downloading and saving the Windows Support Software as described in the installation manual you run the support software from within Windows.
    You should visit the Bootcamp forum https://discussions.apple.com/community/windows_software/boot_camp

  • I always receive receive a message onscreen Error in C\WINDOWS\SYSTEM32\SPOOL\DRIVERS\W32X86\3\DLCFtime.dll have to click on run. Would like missing entry permanently installed on computer file

    I always receive a message onscreen Error in C\WINDOWS\SYSTEM32\SPOOL\DRIVERS\W32X86\3\DLCFtime.dll
    Missing entry: Run DLL entry
    I then click onto the run box below the message and then can access my homepage by double clicking on the Mozilla icon.
    Can anybody tell me how to get the missing entry permanently into my programme files?

    Probably problem with Dell printer,DLCFtime.dll is part of Dell printer driver software, maybe you must update the driver or re-install the software, read here for more information:
    http://answers.microsoft.com/en-us/windows/forum/windows_vista-performance/missing-entry-run-dll-entry/dd6f8f71-ad23-4eff-8a9d-ac8b86d9a199
    http://support.euro.dell.com/support/topics/global.aspx/support/kcs/document?c=uk&l=en&s=gen&docid=DSN_28E393B4B4A5ADEEE040A68F5B2849AA&isLegacy=true
    http://www.tek-tips.com/viewthread.cfm?qid=1396261
    http://forums.majorgeeks.com/showthread.php?t=229356
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • Itunes keeps closing as soon as i open it and states 'windows has detected a problem' HELP!!!!

    Help!! Itunes keeps closing straight away and message states 'windows has detected a problem' HELP ASAP PLEASE!!!!

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
    tt2

  • "Windows Diagnostic detected a S.M.A.R.T fault on disc"

    Hi
    I re-installed Windows 8.1 on my Lenovo Yoga 2 Pro and since then, every logon I get the error message:
    Windows detected a hard disk problem
    when I go to the event viewer I see the error: "Windows Diagnostic detected a S.M.A.R.T fault on disc  SAMSUNG MZMTE256HMHP-000L1 (volumes C:\)"
    1. so first of all, I wanted to ask - should I be worried? besides the error it seams that I can do whatever without any problems.
    2. is there something I can do in this situation?
    I ran chkdsk /f /r on the drive. it didn't change anything
    I even cleaned the drive and repartitioned the hard-drive, and then re-installed Windows - same error!
    3. if the hard-drive works fine and this message appears only from Windows - should it be enough for Lenovo's lab to replace my hard-drive? so far it looks more like a windows problem than a hardware problem :/
    Tamir Levy

    Back up your data as soon as possible.
    Get yourself a new hard drive.
    Also get one of these or similar.. http://www.tigerdirect.ca/applications/SearchTools/item-details.asp?EdpNo=6500244&CatId=3770
    Download this.. http://www.todo-backup.com/ and use it to clone the entire old disk onto the new one
    Hook up the new drive to the above adapter.
    Run Easeus TODO and set it to clone the old disk in its entirety to the new disk. Check the 'sector by sector' box and it will also copy over the manufacturer recovery partition.
    After the clone, remove the old drive, and replace it with the newly cloned drive.
    Your machine should restart and operate just as it did before.
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • How to remove Windows XP files/drivers from Petition it was installed on?!?

    So I tried installing Windows XP on my computer, it asked to choose a petition to install it on or whatever, I believe the screen was blue. I chose one and it asked to erase it so I did because I had some issues earlier after trying to quit the installation.
    I had a recovered version of Mac OS X on my external hard drive so it's now my startup disc, is there a way to go back and recover that petition or erase it so I can completely start fresh with Mac OSX.
    When I tried to install the cd's using the holding down "C" when restarting it showed I only had like 14GB of memory total not available but that's all that I had when I know my computer should have 120GB. I am wondering if it was through installing Windows XP so I want to go in and find that petition and remove the Windows and see if that gives me that memory back.
    Anybody know how to either Remove the Windows files(which didn't work anyway) or how to locate the petition and remove the windows files and drivers from it?
    Thanks you!

    Use the Boot Camp Assistant in the /Applications/Utilities/ folder to remove the partition; you may need to use the Disk Utility to repair the drive.
    (32577)

  • MBP Retina Windows 7 x64 drivers will not load

    I knew nothing about Mac or OSX and got my MBP running in July.
    Then later I realised I shoudl take advantage of the Solidworks capacity to run 64bit so I removed partition, got the ISO, made the Flash USB, installed Windows 7 x64 and it is now installed.
    But none of the drivers copied in. I used the latest updated Bootcamp 4.0.4 and really the first time I did this everything worked when I installed Win 7 x86 and the pc just started in Windows perfectly all drivers working (except the tap function on trackpad did not work).
    I did everything according bootcamp instructions but no luck this time the drivers did not go in (i think)
    Now my new windows 7 x64 is exactly as per my installaion disk W7 Sp1.0 x64 all there but absolute disaster the screen is not recognised I cannot even start to get the wireless working so no network no internet no help.
    I tried to run the setup.exe from the USB ( where Bootcamp made directorories and copied nicely all the files etc etc) as per the printed copy of the bootcamp installation guide (printed copy on hand) but no success
    What now please help?

    (bump) I have a similar issue. Win7 installed fine but I have a few hardware drivers which did not load, particarly the wifi driver.
    Anyone know how to handle this?
    Thanks-

  • MS-7633 Windows XP 64bit Drivers

    Hello there
    Anyone know wher you can get the drivers for 64bit windows xp to run with the above board, ned the drivers to intigate with the XP files so that it find the HDD on bootup.
    Anyone managed to install this operating system on this board.
    many thanks
    Pat 

    Hello
    Sorry the board is a 7366, when I boot off the windows CD it does not find the HDD becaue the drivers are not present - will look at the nvidia site but have had no luck so far.
    Quote from: Jack the Newbie on 16-March-09, 19:48:16
    Hello,
    is your board's model number really MS-7633? Did you mean "MS-7366" perhaps?
    Please double-check. The following thread will tell you where to look:
    https://forum-en.msi.com/index.php?topic=113146.0
    Last time you posted, you mentioned an MS-7366 board:
    https://forum-en.msi.com/index.php?topic=121563.msg917935#msg917935
    Which is one of these:
    http://global.msi.eu/index.php?func=proddesc&maincat_no=1&prod_no=1498
    Windows XP 64bit drivers for NVIDIA Chipset boards can be obtained directly from NVIDIA.
    What exactly is your problem? 
    With Optimized Defaults loaded in BIOS Setup, no additional drivers are necessary for any OS Installation.  Make sure your XP 64bit Installation CD includes the latest Service Pack.  That is all you should need to take care of.

  • Why Windows keep detecting ip address such as 169.254.201.217/16 Both on Windows 8 and Windows 8.1

    Why Windows 8 and Windows 8.1 (Even Windows 7) detects ip network address 169.254.201.217/16 on my computer???
    I keep getting that most of the time.
     

    Hi 
    This is my host files.
    # Copyright (c) 1993-2009 Microsoft Corp.
    # This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
    # This file contains the mappings of IP addresses to host names. Each
    # entry should be kept on an individual line. The IP address should
    # be placed in the first column followed by the corresponding host name.
    # The IP address and the host name should be separated by at least one
    # space.
    # Additionally, comments (such as these) may be inserted on individual
    # lines or following the machine name denoted by a '#' symbol.
    # For example:
    #      102.54.94.97     rhino.acme.com          # source server
    #       38.25.63.10     x.acme.com              # x client host
    # localhost name resolution is handled within DNS itself.
    # 127.0.0.1       localhost
    # ::1             localhost
    And this is my network files.
    # Copyright (c) 1993-1999 Microsoft Corp.
    # This file contains network name/network number mappings for 
    # local networks. Network numbers are recognized in dotted decimal form.
    # Format:
    # <network name>  <network number>     [aliases...]  [#<comment>]
    # For example:
    #    loopback     127
    #    campus       284.122.107
    #    london       284.122.108
    loopback                 127

Maybe you are looking for