Windows 7 Disk Image Burner went away

Somewhere I lost the built-in Disk Image Burner. It no longer appears in the context menu for an ISO file. It does not appear as a selection in Default Programs, nor in Assign File Types. Where can I find it and reinstall or reactivate it? In the context
menu for an ISO file, this appears"-exit -isowrite".
Assistance please

Hi,
Do you have any other CD\DVD burning software installed? If so, it could be that they've associated themselves with ISO files.
I would like to suggest you try to select the ISO file, then right clicking it, then selecting "Open With" and see if Windows Disc Image Burner is one
of the selections.
I also would like to suggest you uninstall any other CD\DVD burning software you have installed and see if it restores the Windows Disc Image Burner
option.
Regards,
Arthur Li - MSFT

Similar Messages

I have what I consider the best smart phone on the market, but I resently upgraded my Windows Vista PC to Windows 8 and my Itunes went away. Is there anything that I did wrong or aren't the two compatible?

I have what I consider the best smart phone. I recently upgraded my PC from Windows Vista to Windows 8 and my Itunes went away. Did I do something wrong or aren't the two compatible?

If the update did not preserve all your Applications you may simply have to download iTunes again and instrall it on Windows 8.
There's nothing strange about an update not preserving installed Applications.

IDVD disk image burning

I created a disk image from an iDVD project and now I want to burn it on DVD.
I checked first on Apple DVD Player and VLC and the DVD played fine. Audio and video worked.
Burned using Toast, but when I played it on my standalone DVD player, there was no audio! I thought it could have been due to the empty AUDIO-TS folder, but I remembered it's supposed to be empty (unless it's a special audio DVD??).
Went back to the .img file, mounted and used DiskUtility to burn. Again, I checked first if it played on Apple DVD Player. It did, audio and video were OK but when played on the standalone DVD player there was no audio.
I tried again with DiskUtility and used a slower burning speed. Result: still no audio when played on a standalone DVD player.
The burned DVDs play with audio when I view them on my Powerbook.
I wonder what could be wrong. Should I go back to my iDVD Project even if audio and video are fine (on the disk image)? I'm at a loss.
Message was edited by: lovewg

If it plays in your computer player (and you say it does), the place to look for problems is in the set top DVD player playback.
Some set top DVD players don't like writable media.
If you didn't use 'good quality' media like Verbatim, or Maxell burned at 4x or slower, your disc could have a lot of burn errors that are causing problems. Computer players tend to have better error correction than set top players and are more tolerant of burn-errors.

Disk Image Burn Won't Load DVD Player

Created a disk image in iDVD.
Opened the image and testing its functionality. All is well.
Go into Disk Utility. Select the image and burn.
Resulting disk doesn't not signal DVD Player to launch and play upon mounting.
I can manually open DVD Player and choose open DVD media and the disk plays as expected. What am I missing here.
Thanks in advance...

Once you have the disk image file on your desktop, click on it once to mount it.
Then open the DVD Player application and the image file should start playing.
The mounted disk image file does not automatically open DVD Player.

I can't get the Firefox Disk Image to go away. I delete it after install, but everytime I open the program the program asks to be installed again. Help?

I downloaded the update .DMG for 4.0.1 and installed the program to my applications folder like instructed. Then deleted the .dmg and "application disk image" (the icon looks like an external device on the desktop). But now every time I open Firefox, the program prompts me to install it to the applications folder again. Am I missing something?

Thanx. I suspected it might have something to do with FF 4.0 still being in Beta. Guess I'm heading back to the old version until such time as the changes are made.
Again, many thanx. Pete

How can I use my Mac G3 (OS 9.2.2) to make Windows disk images and compress them into Windows stuffed archives?

I have a collection of old Windows diskettes, 800 K and 1.4 MB. I want to make disk images (or whatever is the Windows equivalent) and compress them into Windows stuffed archives. I want Windows users to be able to download them, expand the stuffed archives, extract the disk images, and use the softsare on old Windows computers. I need to do the work on a Power Macintosh beige G3 Tower using OS 9.2.2. What software can I get to do it?

To Jan, Greetings
Thank you for your message and for your suggestions.
Is WinZip a Mac application that makes compressed files that can be opened on a Windows computer? If so, then do you have any notion where I could find a version old enough to run on OS 9.2.2?
I noticed that DropStuff 6.0, which I use on my G3 Tower, has an option to make compressed files that are self-extracting on Windows. Do you know if that works? I suppose that I could make such a file and then find somebody with a Windows computer to test if for me.
Yes, I could (shudder) get an old Windows computer somewhere, learn to use it, and do the project that way. Do you know if the old versions of Windows include disk image programs and file compression programs? Or, would I need to buy some old software?
Thank you for the information about the size of the diskettes. As you've probably noticed, I don't know very much about Windows things.
Sincerely,
Frontiersman

Importing Akai disk image file

I've just switched from Cubase SX4 to Logic Pro 8. Unfortunately I'm unable to use my library of Akai disk image files stored on my hard drives. Isn't EXS24 able to load from image files, like Halion does?
I went through the whole process of storing the CDs on my hard drive, because Halion lets you load directly from image files, making this method far better than using the actual CDs...
Help would be appreciated.

Go into Project/Project Info... and see if single-layer is selected in the pop-up. If it is, it should create a disk image to fit on a single-layer DVD-R.
I recommend a disk image burned to Verbatim DVD-R at 4X or slower using Toast or Disk Utility. You can set burn speed in iDVD '08 if not creating a disc image.
David Pogue also recommends Verbatim on page 356 of his iDVD 6 book:
iMovie HD & iDVD 6: The Missing Manual
Quoting David: "Cheaper brands don't use the same amount of organic dyes and are more likely to suffer premature deaths."
I buy Verbatim white inkjet printable in stacks of 50. Verbatim's part number: 94971. They have been flawless for me.
*Burning speed*: Go into the menu > iDVD/Preferences/Advanced. Look at the bottom of that window.

Quicktime to iDVD - iDVD quits when making disk image

You folks helped me a hugely with the arduous process of producing a nice 45 minute iMovie->iDVD movie last year from my digi camera, which actually works (http://www.galfromdownunder.com/peru). Thank you! Last year I was flummoxed by misplaced chapter markers. It's not the case this time.
I am doing another one of a similar size, and am at the stage of trying to burn a disk image, but it keeps falling over with 'iDVD unexpectedly quits' after about an hour and half. This time I saved the little log that pops up with 'send to Apple' (does anyone actually read it if you do?) and have posted it here:
http://www.galfromdownunder.com/ftp/iDVD-crash-report-may2106.txt
I would really be so grateful if an extreme geek would mind taking a look before I try to reverse engineer this whole process further. The log always seems to stop at a place that says:
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000000
The difference between this project and last year's is as follows:
1) In an attempt to save time and space, I bypassed iMovie, and concatenated the QT7 clips and moved the resulting final movie directly into iDVD.
2) Yes, I did see that the Chapter Markers I painstakingly inserted (using that arduous text file process described in QT Help, mindful of not putting one within 2 secs of beginning, end, etc etc) into the movie are not picked up by iDVD. Groan. Still, the disk image burn quit. Then I tried again with the second concatenated QT movie without chapter markers, but it still quit with the above report.
3) I moved individual files to iDVD fudge a separate 'scenes' menu. I know it means there is redundancy in the data now, but there is 4 Gb to play with, so why not....
4) The total capacity comes to 4.3 Gb according to the Status section in iDVD. When I clicked on the DVD Capacity button it said the total was 62 minutes. I thought it was under ... hmmm... had it set to Best Performance.
5) I have about 11.47 Gb free on my laptop. I even tried making the disk image to a 20 gb Lacie external Firewire drive but it still quit.
6) Is there any difference between moving a reference movie to iDVD vs a self-contained? Does the s/w resolve them for you at the end of the day?
Really appreciate help - I realize could/should get iLife06 and a bigger machine etc etc but since I managed to do it last year, why spend more money unless there is an insurmountable tech reason to do so.
Thanking you,
Lynette
Powerbook G4 12" 1gHz 60 gb Mac OS X (10.4.6) 1.25 Gb RAM

My. You sound like an advanced user, but that sounds like a very advanced crash....
You know, I'm not one of the great experts, and I'm here to try to learn why iDVD won't start with a "Missing (iDVD) Image" in the crash log, but I've also had very little success with QT editing. Assembling clips frequently produces a video that is corrupted between clips, and a save doesn't really produce a truly complete file from a series of clips. Usually, the file plays up to a broken video, and the video then freezes, while sound continues. Yet picking on the video at the cursor will restart the video, so it's in there, just broken. Common occurance, this. This can be validated when that malformed file is imported into MPEG Streamclip (free app, and a good one), with the import only loading the clips up to the malfunctioning clip. I'm guessing that iDVD is running up against a malformed section in your QT file, causing a crash against a incorrect behavior in how the code accesses memory.
What would I do?
Since there doesn't seem to be any "self-healing" ability in QT, and since you already have a QT file with times and bookmark names, you might be happier if you went ahead with iMovie, and used the QT file for a ready reference to recreate the video in iMovie. I've done this in remakiing a DVD from another DVD I've created. The recreation process only takes maybe 1/2 hour compared to the much longer first effort. Copying is easy.
I use Final Cut express myself, and like its quality, and use an external drive for movie making, so you can live with the 11gigs you have onboard using your Lacie. Given the sad behavior of iDVD on my G5 recently, not starting and all, I'm thinking that maybe another 3rd party product, like the highly recommended "Toast" may help me elude what I'm beginning to recognize as substandard Apple apps. Apple has annoyed me endlessly with my need to "convert" the standard 'mpeg' to use in Apple products, like Final Cut (even after the $10US upgrade to play mpeg). Perhaps that would be a long term positive for you too.
Like your current experience, I'm at the "had my fill" point with pure Apple apps. Too much dancing with them trying to get common communication to work and too little visibility into why malfunctions are occurring.
In any case, good luck on this fix. Hope someone can get you rolling.
Harley

Multiplexer Error on a 8GB disk burn or Disk image, iDVD

Burning 4.5GB DVDs burns fine.
While trying to burn a 8GB DVD or creating a disk image on iDVD I receive a "Multiplexer Error".
Another time, it burned and with about 3 minutes left the disk popped out of the computer although on the computer it appeared to still be burning. When I put this disk in a DVD player the chapter titles are mixed up with the actual video that plays and the same video is played over various chapters.
I tried changing the burning speed to 2X and tried using an external DVD burner.
Would appreciate any ideas!
Thanks

Sorry that I can not make a shorter answer !
Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev. (Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
Only A to Z and 0 to 9 in chapter title
No Chapter mark at very beginning of movie
No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Max Mccarty
Mar 29, 2013 7:55 PM
I've made literally hundreds of DVD's using iDVD and I occasionally get the dreaded "Multiplex Error". In the past changing the position of chapter markers has worked, but sometimes the only way I can get the DVD to burn is to remove all the chapter markers (not a great solution).
Recently, I've discovered a bug in iDVD that creates the "Muliplex Error" message and it may be the cause of some of my previous problems. Sometimes when you export a movie to iDVD with chapters, it will create chapter menus with incredibly long playing times. My most recent "Multiplex Error" project had two chapter menus. I have a 38 second audio clip that I use for my DVD menus and the first menu showed the correct time of 38 seconds (select View>Show Inspector). The second menu with the same audio clip showed 13 minutes and 42 seconds! When I went to the Project Info window (select Project>Project Info) it now showed the total size of my DVD as 4.8 GB, too big for iDVD to encode. So, I manually adjusted the time of the second menu to 38 seconds. This time without changing anything else, iDVD burned the disk perfectly.
The interesting thing is that when I began the burn, the project info showed under 4GB for my disk. So, from now on I'll check the playing times of each menu before I burn.
Yours Bengt W

Disk image successful; burn error due to 'ghost' image

I have burned 100s of DVDs successfully. I always burn them from their disk images. My last project took longer because I ran into what I think is an unusual problem.
I created a disk image and burned a DVD, but then decided there were a couple of places where more edits would make a better movie. I went back to my iMovie, made the edits, and opened up iDVD and created another disk image. Both disk images had had the same name, but that shouldn't have been a problem since the first one had been trashed before the second one was created. When I opened Disk Utility to burn the disk, the disk image (which was on my desktop) appeared in DUs window.
However, when I tried to burn from the disk image, the burn failed at the end....so that the DVD played up to the last 3 min of the movie. The message during the burn was something like 'burning disk 5' but that was not the name of my project. The message at the end was that the burn had failed due to error 00000000500--(not sure of the exact number of 0s). The disk was ejected with the burn almost complete.
I had not had this occur before, and I don't know why it happened. I have no idea what or where 'disk 5' is. That is not how I name my projects and have never seen that. The disk image I was burning from had the name of '1995 Part 2' and, after the disk was ejected, that disk image could not be deleted from Disk Utility. It seemed to be referencing some 'disk 5' file.
I subsequently had a successful burn by creating another disk image (found more edits to tweak) and naming it something different so I could be sure to burn the correct one since the other image was still in DU.
This time it all worked, but the first disk image in Disk Utility's window would not delete. I finally got it out by deleting the other one, closing DU, reopening it and finally it could be deleted.
That 'ghost' file for disk 5 still is a puzzle to me. I would like to know if I did anything to cause it so that I can avoid the problem in the future.

Any chance the first disk image was still mounted on your desktop when you put its .img file into the trash?
Thanks! I think you nailed it!
I had tried playing from the disk image with DVD player first and it played fine, but then I decided to do more edits so I trashed the .img file. I forgot that I had mounted it. When I tried to burn the second disk image, Disk Utility must have still used the first image, even though it had been trashed, because it was still mounted.
However, the icon showing when something is mounted was not there.....until after I had made the final image and then I could eject the mounted disk whose path on DU showed that the .img file was indeed in the trash.
Do you think that would have made its name change to 'disk 5' and would that have caused the burn to stop just 3min short of the end?

How do I create a disk image for windows 7, using a windows computer for USB bootcamp for mac?

Hi There, I have just bought a new 2013 iMac.
Spec: 3.4 GHz intel core i5, 16GB 1600 MHz DDR3 Memory , NVIDIA GeForce GTX 775M 2048 MB Graphics with OS X 10.9.4.
How can I create a 'disk image' from a windows 7 professional 64bit installation DVD using a windows laptop with windows 7 Operating system on? I want to transfer this 'disk image' (ISO?) to a USB ready for installing windows onto my 2013 iMac using bootcamp? I want to use bootcamp from a USB as I have no disk drive for the installation DVD on my iMac. I hope all this is clear.
Thank you. Joe

Yes, that's correct, at least not directly. You can create a blank disk image, copy the file to the mounted disk image, then burn the image to a CD/DVD.
Open Disk Utility and select Blank Disk Image from the New menu. Provide a name, Save location, and select the image size from the drop down menu. Leave Encryptions at None and Format as read/write. Click on the Create button.
After the image file appears the "removable" disk should be automatically mounted. If not double-click on it to mount it. A "removable" disk icon will appear. Drag the file you want to place on the disk image to the "removable" disk icon. The eject the "removable" disk icon. Now select the disk image file in the DU left side list and click on the Burn icon in the DU toolbar. Be sure to have a blank disc ready.
The above is actually the "long" way to do this. A much easier way is to simply insert a blank CD or DVD into the optical drive. The Finder will pop up a dialog asking what to do. Select the option to mount on the Desktop. You will now see a disc icon on the Desktop. Drag the file you want to burn to the CD/DVD, right-click or CTRL-click on the disc icon and select Burn from the contextual menu.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Source Material error when burning disk image

Well, I've been haunting these forums for 10 days, finding answers to every darn problem under the sun I've encountered! (thanks folks, I've been near hysteria) Now I have yet another problem, and I cannot find an answer in the forums (sorry if it's there.)
I have built my movie in iMovie, imported to iDVD, created my disk image, played my disk image (worked perfectly), connected my brand new LaCie external burner, loaded Toast 6 Lite, dragged my mounted disk image icon into the window, popped in my Verbatim DVD+R and let 'er rip.
And, poo, I'm informed that 4 files are in an unsupported format and cannot be imported. EH? I thought the disk image kept all self-contained? I press onward, and hit burn. Churning, churning... and then this message:
"Could not record disc because there is a problem with the source material. Result code= -18774"
Trying to burn via Disk Utility doesn't work either. My mounted disk shows up, but when highlighted the burn button is grayed out. Only when I click on the .img file is the burn option lit.
Am I supposed to drag the .img file rather than the mounted little disc icon? PLEASE HELP. These movies were SUPPOSED to be Xmas presents... now I'm praying for Michaelmas gifts!
TIA

ohmygosh. Lightbulb! I've been trying to burn the file_name one and not the file_name.img one. I assumed the point of mounting the file was to burn it, but it's only to preview it, yes?? So, I did that via Disk Utility, and it worked!! Only thing I can't figure is how to set the burn speed. I know slower is better, but can't find the place to tell it the speed. It never asks.
Toast still gives me the source material error. I do have the 'video' tab selected, and I've done the drag-n-drop method AND the 'add' method ('copy' is only for transferring data from one CD/DVD to another in my version, evidently). Toast doesn't allow me to grab the .img file, so I'm assuming IT wants the mounted file_name one? I'd still like to be able to use Toast to burn, so a solution to this would be appreciated. I'm using Toast 6 Lite, BTW.

Burning several disk images in one DVD

Is it possible to bun 2 disk images on a DVD? I tried in DU but if both .img are selected,"Burn" is greyed.
Alternatively, how can I combine 2 disk images into one, so that DU will accept to burn it?
I found the following advice a Forum:
A .dmg file is a disk image, and can be treated like any other disk. You can copy the contents of one into another, or make a new blank image and copy their contents into that.
I did that, but, as I said, DU doesn't agree
Those disk images contain home videos which have been edited in iMovie 5, but cannot be burned in iDVD because my Mac mini has no DVD burner. So I create a disk image in iDVD and use DU -> Images -> burn on an external burner.
Also, is it possible to rename a DVD? For some reason the latest DVD is bearing the same name as the DVD burned just before it.

your whole topic is Finder-related, MacOs allows/supports simple drag'n drop...
your both .imgs exist at some location of your Mac, right?
no app needed nor running...
insert an empty dvd-r
your Mac will ask you what to do...
you do: drag'n drop both .img files onto disk...
hit the burn button in disk's window..
no step 3), boom! done..

IDVD Hanging On Disk Image AND Burning

I've been having this problem since upgrading to 10.4.7 (I have iDVD 6.02). I can't burn a DVD and I can't save a disk image. iDVD just hangs up and quits or it just hangs and becomes non-responding.
I restarted and repaired permissions over six times and even tried it running no other applications but iDVD and still have the same issue.
Help!

Hi Leigh:
Did you read the Apple article that Len Goff
suggested?
iDVD appears to be unresponsive when encoding Audio
http://docs.info.apple.com/article.html?artnum=302988
It may just take a lot of time to finish. have you
tried burning overnight?
Sue
I set it up Wednesday Night to burn and at 9 am it was still hanging. I force quit iDVD and restarted my Mini and set it up to burn again and when I got home from work it was hung at the Audio encoding again. I repaired permissions and attempted the process again over night and this time the DVD had been ejected but was still blank when I went to play it. I then read the this forum post and trashed the plist, repaired permissions and attempted again and still no luck! I am about to try it again and see what I get when I get home from work!

Burning disk images on Disk Utility...

How do I burn multiple Disk Images onto a single DVD that I can then use on a PC? I have several 3 CD application images, and I want to convert them to DVD, but I can't figure it out, and I have no clue how this can be done! thanks!
(PS) I also have Toast Titanium 7, and even that doesn't seem to have an explanation on how to do this!

I purchased several software titles that were released on CDs (3 cd set!) once I have turned them into disk images (DMG and/or IMG), how do I burn the 3 images into a single session DVD for use on Windows XP? as far as I know, XP can only read single session DVDs and CDs, so I need this to be burned (3 IMG files) onto the single session DVD, but i have no clue how to do it. please help me! thanks!
(PS) can be completed using Disk Utility or toast 7 [since I have a full version of both]

Windows 7 Disk Image Burner went away

Similar Messages

Maybe you are looking for