Windows 7 display driver error on Satellite L300D

Hey guys, I have recently upgraded the OS on my Satellite L300D (PSLC8A), from Vista 32bit to Win7 32bit, but I need a better driver for the graphics card, an ATI Radeon 3100 256MB, and every time I try and run either the Win7 driver from the ATI website, or even the graphics drivers from the Toshiba websites (Ive tried the Vista display driver, the display driver for the Satellite L300D-ST3501 from the European website for windows 7 display driver etc etc) and every time I try, I get the same message, it goes through the entire process, then says it fails, always failing at the same part, at the ATI Display Driver installation
Am I trying the wrong driver? Is there not one out for my laptop for 7? I dont quite understand, and any help would be appreciated
Also like to point out, that Ive attempted to allow it to tell me when Win7 finds something new and needs permission, and have tried running *every* time in admin mode.

Hi
First of all you should find out what graphic card is built-in.
Install an free hardware diagnostic tool. You could use Everest Home Edit. for example.
This would help you to get more details about your GPU.
After that you could investigate a little bit what Toshiba notebooks have been equipped with the same graphic card chip.
I noticed that many series use the same devices like the same graphic card or chipset
Anyway. The Toshiba US driver page contains many Win 7 drivers you will find also some Win 7 drivers on Toshiba European driver page
Download the ATI driver for a notebook which has been equipped with the same graphic chip and you would get the compatible one!
Then install the driver in device manager! Yes, go to device manager and use the advanced installation this allows you to point to the ATI driver files.
This installation procedure should work

Similar Messages

  • B575 Windows 7 display Driver error message

    Hi, I'm new and not well educated on the computer a little more than a beginner so please bear with me.
    Lately I have been having the problem that i will be looking at the computer and it will go black and then turn blue with a whole lot of messages and numbers on it and tells me some that if this happened just the once restart the computer but if it has happened more than once to follow the directions an it has happened more than once. it tells me to reset my display driver or check that anything i have newly installed is correct.  i dont have anything that i have installed . i turn the computer off and then have to start it as normal and then it runs fine until the next time.  It is a laptop b575, about 2 years old windows 7. i have checked the drivers in the device manage and they say i have all the up to date ones so i cant fiure out what it is. the message also says to  remove bios memory or cach etc and i dont know what that is other thing i only have is the thing you can use for fingerprinting and i dont use it can anyone help me please?
    Moderator Note; subject edited

    is there someone that can help me with this?

  • Display driver error on Satellite A200-14D

    Hi,
    When i try to install on my Toshiba laptop(Satellite A200 14D with XP) a game...... i get an error message saying "Could not initialize graphics system. Make sure that your video card and driver are compatible with "DirectDraw"
    How can i get help with this problem?!
    Thank you for your help.

    Hi,
    you have several options to solve that problem.
    First, check the [Toshiba Driver Download Site|http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp] for the newest drivers. If they dont help, go to [Laptopvideo2Go.com|http://www.laptopvideo2go.com/] which is also really good site with vga drivers.
    Sideways you should update your [DirectX|http://www.microsoft.com/downloads/details.aspx?FamilyId=2DA43D38-DB71-4C1B-BC6A-9B6652CD92A3&displaylang=en] to the latest version.
    Please give a post back if nothing helped.
    Greets

  • Satellite T130-02F - Display Driver Error

    Hi There,
    I just purchased the Satellite T130-02F and after choosing 32bit running system I had the power connected to charge battery up and then started to get "display driver errors" where the screen would flash black and then flash back on. I've checked device manager and driver details, the drive is upto date and as far as I can see is the correct driver. I've searched sites to see if there ar other drivers out there, but its up to date.
    I haven't installed anything extra on the computer yet and find I get the error more regularly on the battery rather than power which concerns me. The computer is less than 24hrs old.
    Any advice?
    Mobile Intel (R) display chip set.
    Windows 7 installed 32bit.

    Hi
    In your case I would try reinstalling the display driver. You can find the latest version on the Toshiba website:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
    After this make sure that the newest BIOS version is installed. You can download it on the Toshiba website too.
    If nothing works your only chance is an authorized service provider. It seems to be a hardware problem and must be checked from professional people.
    Greets

  • Have a Sony Viao E series and get an "imcompatible display driver" error message

    Get an "Incompatible Display Driver" error message when attempting to use Adobe Premiere Elements 12 on a Sony Vaio E series laptop.
    How to solve this problem?
    Thanks

    I Googled, and Sony says that is a discontinued model, so I can't find a specification page
    Amazon does have a couple models, and BOTH say motherboard integrated Intel graphics adapter
    That makes me think the laptop discussed here has Intel AND AMD graphics adapters
    To the OP (Original Poster) Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
    If YES, read below
    -http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
    -http://forums.adobe.com/thread/1001579
    -Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
    -link to why http://forums.adobe.com/message/4685328
    -http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

  • Dc7900 crashes and has display driver error

    Hello,
    Just bought this off lease  unit and the computer keeps crashing. When it doesnt crash it has issues with the display at times and recovers saying that there was a display driver error and that it was recovered.
    Any idea on how to fix this? The comp was originally visa but now has windows 7 32bit business on it. My action center for windows 7 says on the maintenance tab that my intel graphics driver has stopped working what does this mean and how do I fix it?
    Thanks!

    Hello travisdahms,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are having issues with your Windows 7 on the HP Compaq dc7900 Business PC. I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Business PCs - Compaq, Elite, Pro.
    I hope this helps. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • About display driver error report

    My operating system is windows 07. I have pentium 4 intel prosessor and motherboard is p pavilion 06 asteron. when i'm working the display shut for a moment and displays the display driver error report that "display driver stopped responding, has been solved". the display driver is ATI RADEON EXPRESS 200 series. if the matter with display driver how can i get proper one.

    Hi again dasuncj,
    Thank you for the quick reply!
    So that I can better diagnose the error message with your specific brand of HP Pavilion 06, I will need to know both the model and product number. This can be found by using this video below:
    Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
    Cheers!
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Display Driver Update for Satellite L30-105

    Could anyone give me an idiots guide on how to update a display driver for my Satellite L30-105 ( PSL33E ) PLEASE?

    LOL. You need a idiot guide?? Come on man ;)
    Ok, here is my guide;
    Download the graphic driver for your notebook model.
    Unzip the package.
    Then access the device manager, mark the graphic card, update driver.
    Then a new window will open.
    There you have to use the second Advanced option.
    Then choose the option called Dont search. I will chose the driver (or something like that)
    Then point to the place where the driver package has been stored on the HDD and finish the installation.
    Greets

  • Nvidia Display Driver Error

    New T61-CTO system, Vista 32 with Nvidia Quadro NVS140M that is not even a week old.
    The system is very unstable, crashing almost daily with a display driver error.  About half the time it is able to recover and I get the following message, "Display driver nvlddmkm stopped responding but has recovered.....".  The other half the computer crashes to blue screen or just freezes with a corrupted display and I am forced to hard-power-off to restart.  About 75% of the time the error occurs at startup, but sometimes just randomly while working.
    There is lots of info about this driver problem online but mostly for different display adaptors on desktop systems.  For the record I have the following display driver installed: 7.15.11.5685 and it is dated 12/10/07.  Nvidia does not provide support for this display adaptor and refers you to the system manufacturer.  Strangely, the driver on the Lenovo site is 7.15.11.0145 and dated 7/12/07, not sure why my system shipped with a driver that is not listed on the support site.
    Any information on resloving this issue would be greatly appreciated.
    Thanks

    Hi WillThePill, and welcome to the Lenovo User Community!
    I come up with a newer driver version 7.15.11.7693 2009/01/13 on the Lenovo support site:
    http://www-307.ibm.com/pc/support/site.wss/documen​t.do?lndocid=MIGR-67890
    Try that and tell us if it helps!
    I don't work for Lenovo. I'm a crazy volunteer!

  • Display driver error while playing games on Satellite P100-387 PSPA3E

    Hi,
    I have a Satellite P-100 387 PSPA3E notebook (with Nvidia 7600 GO 256 MB) and no matter what game I play I get a stop error-blue screen of death all the time and must restart.
    It happens while I play either "Command & Conquere-Tiberium Wars" or "Warcraft III" (which can run on ANY low end machine).Did the BIOS update and got the latest display driver from Toshiba support. Nothing. Also, Ive tryed ALL the driver versions from Nvidia and from LaptopVideo2go.com with modded inf-s.
    Dont know what else to do so I post here before contacting Toshiba. I have a valid warranty on the machine. Running XP MediaCentar which came with it.
    THX in advance!

    I am heading to bed in a minute, but will look at driver details tomorrow.
    I seem to remember that the latest BIOS update improved something to do with graphics.
    Yes, I've got the 7600 go graphics card.
    You have good ventilation to the laptop? (i.e. you don't have it running on a deep pile carpet, or on a big deep duvet or something?)
    I tried the Nvidia drivers too but they dont work, it has to be the drivers from Toshiba.
    Suggest you do a system restore, and if that does not help re-flash your BIOS
    The link to the driver updates was good, but not for the laptop.

  • Display driver error Windows 7

    I recently installed a new hard drive in my T61 and did a clean installation of Windows 7.   My laptop now stalls a bit and the screen goes black and then the screen returns to normal and a message pops up informing me that the display driver has an error but fixed itself.  This keeps happening and I'm wondering if there's anything that can be done to fix it?  Also, my cursor is skipping around a bit.  I'm not sure if these problems are related...
    I made sure to update the drivers and BIOS with ThinkVantage Update 4.0 so I'm not sure if maybe there is an additional driver that I need to install.  Any help would be appreciated!

    Hello,
    Under Microsoft Windows 7, software is normally uninstalled from the Programs and Features applet (filename: APPWIZ.CPL) in the Control Panel. 
    These days, having the correct device drivers for your video chip (and having them correctly installed) is more of a requirement than an option, since so many features of recent versions of Windows depend upon having correctly functioning video (i.e., being able to display 24-bit color, support for higher resolutions, Aero Glass support and so forth).
    If you are uncomforable or unsure of the exact steps, perhaps a more PC-savvy friend could assist you, or you could call Lenovo tech support and get a second opinion or a walk-through on how to reinstall the video device driver software for your ThinkPad T61.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Missing windows 7 display driver for my Toshiba Satellite?

    Hello everyone,
    I've got a problem with the display driver of my laptop. Specifically, the display driver is stop working when I awaken the device from a sleep. I have tried to update the driver from Toshiba Australia but surprisingly I did not find the display driver for my model. So I tried to use the vista drivers but the problem still exist. Unfortunately ATI does not provide the drivers directly to Toshiba notebook instead they advice to go to Toshiba. Can any one advice me how fix this problem. My Toshiba specification details as follows:
    Satellite Notebook
    Series A300
    Product: PSAG4A-02500M
    Operating system Windows 7 64-bit.

    There's a link on the Australian A300 driver page "unable to find W7 drivers - click here" (its in red, small and not obvious). Looks like you want to go here [http://support.toshiba-tie.co.jp/windows7/download/Satellite_A300_64_au.htm]

  • Satellite L555-S7008 - Can't install Windows 7 display driver

    Hi Guys
    I'm confused now
    I have a Satellite L555-S7008, I Installed a Windows 7 ultimate edition but unfortunately the display driver didnt work. Now I have Pain in my eys because of the resolution. What should I do in order to make it work?
    Hardware detected "Mobile Intel(R) 4 Series Express Chipset Family" but it doesnt support this type of hardware
    2) What driver should I installed for PCI Network communication controller?

    Thanks for ur reply freind
    I Followed the Below but with no success:
    * Microsoft Windows* Vista / Win7 "Have Disk" Installation Instructions
    1. Click "Start" then right click on "Computer" button and select properties.
    2. Click on the "Device Manager" selection on the left.
    3. IF UPDATING DRIVER GO TO STEP 5
    4. Double click "Video Controller (VGA Compatible)" if present under "Other Devices". (Go To STEP 6)
    5. Select "Display adapters" then double click on the graphics controller shown.
    6. Click on "driver" tab and select "Update Driver".
    7. select the following option: "Browse my computer for driver software"
    8. Select the following option: "Let me pick from a list of device drivers
    on my computer".
    9. Click on the "Have Disk..." button and then the "Browse" button
    10. Enter the directory where you unzipped the file you downloaded,
    and then enter the "Graphics" subdirectory. Highlight "igdlh.INF"
    file. Click on the "Open" button
    11. Click on the "OK" button and then click "Next" button. The operating system will install the driver.
    12. Click on the "Close" button and then click on the "Yes"
    button to reboot. The driver should now be loaded.
    But I Noted that the file "igdlh.INF" is not in the directory as i found inside it this" kit19757.inf""
    Pls help freind,Realy i have pain in my eyes
    Thanks

  • "GPU enhancements/display driver" error with NVidia GeForce 8600 GTS

    I am currently evaluating a demo of Adobe Photoshop CS4 Extended. I am using a NVidia GeForce 8600 GTS video card. When I open the application, I get this error:
    Photoshop has encountered a problem with the display driver, and has temporarily disables GPU enhancements. Check the video card manufacturer's website for the latest software.
    GPU enhancements can be enabled in the Performance panel of Preferences.
    Here's the thing - the NVidia graphics driver I'm using is current! It's version 195.62. And here are the specifications of my video card (which is about a few years old).
    I am using Windows XP Home 32-bit SP3 with 2GB of DDR2 memory. Processor is AMD Athlon 64 X2 6000+.
    I've read over the functionality that this error message affects, and I'm not sure I understand it. If my video card is using its most current driver, what the heck am I to do? How badly will this handicap my Adobe Photoshop experience? (For reference, I plan on not doing that much using the 3D capabilities of Photoshop - but it may be interesting one day.)
    Also, one bug I'm experiencing is that the Layers window is present, but its contents don't appear unless I click on it.
    I'm not sure if I'm open to buying a new video card just to satisfy my Photoshop needs. Any help is much appreciated in overcoming this error and enabling FULLY-operational functionality of Photoshop CS4. Thanks!

    Here is a link that may help with old GPU's. Also ensure before you update the drivers that opengl is turned off otherwise PS will use the old drivers.
    http://kb2.adobe.com/cps/405/kb405064.html

  • How to install Vista display driver on my Satellite M55?

    Hello
    I have Windows Vista on my laptop Satellite M55 but I cannot instal my display driver :(
    How can I install display driver on Vista?
    Vista knows Mobile Intel(R) 915GM/GMS/910GML Express Chipset Family (Microsoft Corporation - XDDM)
    I wanna instal my graphic card on Vista OS
    Pleas help me
    Thnx

    Hi!
    Sorry but you will not get drivers for this Intel chipset and Vista.
    I searched on the Toshiba and Intel website and there are no drivers for Vista available. So must use Windows XP, there is no support or drivers for this chipset and Vista.
    Bye

Maybe you are looking for

  • Music Library on Network

    I live in a household with multiple ipods and multiple computers all on the same wireless network. Can I have a single library somewhere on the network where I can add files from any computer onto that one central library and update each ipod from an

  • SWW_WI_EXECUTE_MULTI is missing in ECC 6.0

    Hi Experts, Earlier in 4.7 we were using SWW_WI_EXECUTE_MULTI FM for executing multiple workitems. But in ECC6.0 SAP has removed it. If anybody is haing some alternate FM please reply. Thanks in advance. Regards, Aabha

  • CALL_NOT_FLUSHED error while opening word document proxy

    Hello Gurus, We are using DMS application for uploading word documents in SAP system. We are using the following code to open a document from SAP database CALL METHOD CONTROL->GET_DOCUMENT_PROXY EXPORTING DOCUMENT_TYPE = '207' DOCUMENT_FORMAT = '' IM

  • Why is there no way to change the default crop size?

    This is a common question and seems would be a very easy thing to implement. Many people work on a project that requires the same framing yet are required to change the crop size photo after photo.

  • Work Repository creation - Error

    hi, I have cretaed Master Repository successfully but while creating Work Repository, getting following error Name : Work_Repository Technology: Oracle instance/dblink (Data Server): (empty) username: snpw (I have created this user) password: snpw JD