Windows 7 does not boot after bootcamp installation

Hey!
I installed windows 7 x64 on my MBP 15" retina with bootcamp, and the installation went fine but after the installation when it said " prepairing your desktop" it just restarted and went into boot loop, so I had to boot into mac OSX and make it primary boot. This have happend 3 times, and I've recreated the ISO image on the USB and I've deleted windows 7 and the partition and I have done the whole process over again (3 times) and it still does not work. Sometimes I get into windows 7 the first time and can move around the desktop with the mouse for about 5 seconds, then it says "logging out" and I'm back at the same problem.
What can I do?
Best regards,
Jack Hellberg.

Hi Jack.........ok ive managed to create a link to that video on how to install bootcamp.....this is the tutorial i used and i managed to gain 100% completion on bootcamp 1st time no messing......like i said in my previous reply did you save the windows support files from apple....(Critical).....ok no point in messing about i suggest you start again from scratch........these are the things i used and YOU will need to complete bootcamp
mem stick or cd-r / dvd-r......original copy disc of win 7 ...i never used an iso i used original disc....allow a minimum of 30gb of space for your win 7 partition.....if you want bootcamp so you can use big programs like windows based games i.e.....Crysis/Call of duty etc etc ..then you will need to consider that you will need to allow a bigger partition to allow your HD to store the files.....this is the reason i installed bootcamp and so i made my partition i have a 750GB HD so i made a partition of 300gb for windows 7 and left the other 450gb for Mac....so you need to partition enough for what you want bootcamp for remember once you get bootcamp working you will need to install ALL Important Windows updates Including Win 7 SP1......once everything is installed you will have bootcamp up and running lovely.....u can then boot up with either win7 or mac......click this link and watch carefully and do exactly as shown ok and you should be fine...if you have any probs contact me again ok.....let me know how you get on ok..:)...http://www.youtube.com/watch?feature=fvwp&v=QFIWtXTl4d0&NR=1

Similar Messages

My mac mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone

My Mac Mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone. I had switched the start-up disk back to the original of course. Now all I see is the Apple logo. What should I do? Thanks in advance.

Try disconnecting any external devices, especially hard drives
and try rebooting.
If that doesn't help, then :
If you are running Lion, boot to the Recovery HD and run a
Repair Disk on the OSX partition.
If Snow Leopard, boot to the installl DVD and run Repair Disk.
Also, you may want to bookmark this:
http://reviews.cnet.com/8301-13727_7-57345273-263/troubleshooting-the-boot-proce ss-for-intel-macs/?tag=txt;title
for future reference. It is a pretty good explanation of the
Mac boot process and how to identify where problems may be.

OSX Lion won't boot after Bootcamp installation interrupted

Hello, I started a Bootcamp installation on my OSX Lion Mac Pro. Once I realized that I could only use Windows 7, I had to hold off on the installation until I located my Windows 7 disk. I had set the Bootcamp partition size to 100 GB on a 500 GB Drive. Due to threatning weather, I shutdown the computer.
Now the OSX Lion does not boot! I have been reading much information on this topic to see about fixing the problem. I talked to Apple Support and so far it is still not working. I was able to boot using the recovery partition "Disk Utility -> First Aid -> Repair Disk". When I ran Repair Disk there were some errors reported and repaired, then OSX still not booting. I installed Lion on another drive using recovery and that works OK. I was hoping to install Lion on the original drive and still not disturb my data files like music, photos, etc. That volume with OSX is greyed out and does not mount. I am thinking that the GPT had been modified and since Windows was not installed on Bootcamp, there is no way to boot on the original drive /dev/disk2. I read about a backup GPT, so I am wondering if I can use the backup GPT to fix the boot problem.
Thoughts?
Thanks,
David

Thanks for the fast reply. Ill try this again. Did this the first time, but wouldn't boot again. I've since done a,fresh install of Lion, and it created the proper recovery partition. I didn't have this before, because I cloned my old drive, when I upgraded to an SSD drive. Didn't know about the recover partition. Ill try again, and see if I can get it to work.
Just need to figure out the driver situation, with my Nvidia Quadro Mac video. Not worth trying again, if I have to use default generic video drivers.

New MBP i5 does not boot after hard disk swap

Hi there,
I received my new i5 MBP today. After booting it once with the installed HDD to check if it's ok, I exchanged the hard disk for the one in my Late 2008 Macbook Pro. After doing this, my Late 2008 Macbook Pro boots fine with the (new) hard disk from the new i5 MBP, but the i5 MBP does not boot with my old hard disk.
To give you some details:
- I have installed 10.6.3 on the (old) hard disk that's not booting.
- The i5 MBP boots fine from the installation DVD
- Disk utility finds and can read my hard disk, no errors
- PRAM NVRAM reset did not help
- when booting in safe mode, I can see the system stop booting after or while loading Extensions.mkext
My guess is, it tries to boot and load the wrong Extensions for the new system (CPU? GPU?). I have no idea how to fix this.
Any help would be greatly appreciated!

Focx,
Welcome to Apple Discussions.
Inserting the drive from an earlier model MBP will probably not work. The version of the system you have on that HD is designed for earlier hardware so when you put in in your new machine it's going to be recognized. What I'd recommend is re-installing the disk that came with the new machine and of course putting the 2008's disk back in the old machine. Then use Migration Assistant on the new machine and migrate your data from the old machine into the new machine.
This will provide a much more stable system and should work just fine.
Regards,
Roger

My iMac does not boot after update!!!

I have just update my iMac (Intel) with Apple Software update. I have not updated for quite a while and obvious there were a bunch of stuff to update on my mac. However, when the computer requests a restart, my computer simply does not restart at all. I have tried to make it restart from the apple icon, and it still stay on. So I turn it off manually and the problem kicks in. My computer start with the grey apple icon screen and the little progress indicator, but it does not boot into OS X!!! It remains in a blue screen with the mouse pointer.
I restarted it again unplugging everying and nothing changed. Then I tried Disk Repair and it does not help neither. Then I tried to hold the power button while turning it on till I get the loud beep noise and flashy light. The problem stay the same. I do not want to erase my disk...
Someone Helps!
Intel iMac 20" Dual Core / MacBook Pro 15" Mac OS X (10.4.6)

Interesting. Have you installed any third-party RAM? Is there any possibility that your RAM became loose? Make sure your existing RAM is seated properly.
Have you performed a SMC reset?
Resetting the SMC can resolve some computer issues such as not starting up:
From the Apple menu, choose Shut Down (or if the computer is not responding, hold the power button until it turns off).
Unplug all cables from the computer, including the power cord and any display cables.
Wait at least 15 seconds.
Plug the power cord back in, making sure the power button is not being pressed at the time. Then reconnect your keyboard and mouse to the computer.
Press the power button on the back to start up your computer.
Are you able to boot in SAFE mode? If so, you can trouble shoot from there.
Be sure the computer is shut down.
Press the power button.
Immediately after you hear the startup tone, press and hold the Shift key.
Tip: The Shift key should be held as soon as possible after the startup tone but not before.
Release the Shift key when you see the gray Apple and progress indicator (looks like a spinning gear).

Help - Mac Mini does not boot after re-install of OS X

Hi,
I have a Mac Book Pro and Mac Mini. I needed to reinstall my Mac Mini but lost the install disks. The install disks of the Macbook do not work (machine specific). So what I did was boot the Mac Mini in firewire target mode and installed OS X to it from the Macbook. Worked ok. Except for one thing: The Mac mini does not boot the fresh OS X installation. I get a blinking folder icon with a question mark on top of it.
I booted from the Mac OS X install disk, repaired disk permissions etc. and tried to use the "Startup Disk" utility to select the hard drive as a boot device. But that utility does not offer me to select the hard disk, it doesn't even show up (while DiskUtility can perfectly see it).
Any hints for me? I am pretty much stuck right now.
Thanks

Well, see, the fact that it wouldn't let you boot from the MacBook install disks should have been your first clue to not try to do it. There's a reason it wouldn't let you. The MacBook install disks contain a version of the OS specific to the MacBook, in order to prevent people doing what you just tried to do (ie, installing the same copy of the OS on multiple machines).
If you don't have the Mac Mini system disks any more, you'll have to go buy a copy of OS X. You could also ask for help from an Apple Store, if there's one in your area, but I honestly don't know if they would give you new disks. I would think they should (for a small fee), since Mac Mini system disks would be useless to anyone who didn't already own a Mac Mini, but you never know.

Macbook pro does not boot after upgrading ram

I have a macbook pro late 2011 which runs with mavericks operating system . I have tried to upgrade my macbook to 8Gb. Macbook does not boot when the two ram slots are filled with 4GB ram but runs well when the slots are filled with 2GB ram. When i try them individually with one slot of 2GB ram and another slot with 4GB they run perfectly which shows status ok in the RAM info. What could be the problem .

Around here, most of us recommend only Crucial and OWC for RAM because it's guaranteed to work with Macs and it's what most of us have. If I were you, I would return the RAM and look at purchasing RAM from either Crucial or OWC. If you can't get their RAM to work then you'll know that there's some trouble with your actual slots.
Good luck,
Clinton
MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

Windows 7 x64 Professional does not boot after install

Hello.
I created a Windows 7 VM in Windows Server 2012 R2 Standard Hyper-V, all the installation process done successfully, but after installation, it failed to boot and shows a black screen, and didn't boot after it.
Following is the event log occurs.
'Win-7_QA-Testing' was faulted because the guest executed an intercepting instruction not supported by Hyper-V instruction emulation. If the problem persists, contact Product Support. (Virtual machine ID 5B827557-7009-4D83-AA7C-26A45651EC3A)
VmName
Win-7_QA-Testing
VmId
5B827557-7009-4D83-AA7C-26A45651EC3A
FailureCategory
<not a known problem>
InstructionByteCount
0
InstructionBytes
Rax
0x10
Rbx
0x80
Rcx
0x0
Rdx
0x80
Rsp
0x200
Rbp
0x6e08
Rsi
0x25da4a
Rdi
0x7da4a
R8
0x0
R9
0x0
R10
0x0
R11
0x0
R12
0x0
R13
0x0
R14
0x0
R15
0x0
Rip
0x9d
Rflags
0x10002
FpControlStatus
7F030000000000000000000000000000
XmmControlStatus
0000000000000000801F0000FFFF0000
Cr0
0x10
Cr2
0x0
Cr3
0x0
Cr4
0x0
Cr8
0x0
Xfem
0x0
Dr0
0x0
Dr1
0x0
Dr2
0x0
Dr3
0x0
Dr6
0xffff0ff0
Dr7
0x400
Es
0002000000000000FFFF000020009300
Cs
00000B0000000000FFFF000000B09F00
Ss
0002000000000000FFFF000020009300
Ds
0002000000000000FFFF000020009300
Fs
0002000000000000FFFF000020009300
Gs
0002000000000000FFFF000020009300
Ldtr
0000000000000000FFFFFFFF00000000
Tr
0000000000000000FFFF000000008B00
Idtr
000000000000FFFF0000000000000000
Gdtr
000000000000270000002B0000000000
Tsc
0x3b48531f8c6
ApicBase
0xfee00900
SysenterCs
0x0
SysenterEip
0x0
SysenterEsp
0x0
PendingInterruption
0x0
Any help will be appreciated.
Thanks

How many vCPU and how much RAM have you given the VM?
Are you using alt +F10 and going into the shell to format the VHD and prior to the installation?
Are you using media that has SP1 slip streamed into it?
Have you tried forcing the vm off and then back on again?
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
vCPU = 1
RAM = 2048MB
No, I haven't try formatting the VHD between the window installation. This is the first time I'm facing the issue. It is a simple windows 7 pre activated iso file, not powered by SP1. I have tried forcing the VM off and ON again, but simply i can't get the
window screen back. Whenever the VM malfunctioning like this, then it cannot be shut down from the Hyper-V directly, but to make the VM Turn Off manually.

Windows NT does not boot after installing NI-CAN 1.6.0 or security update

We are running Windows NT 4.0 SP 6 english with MS IE 5.5.
On one machine we had NI-CAN 1.6.0 installed. After installing the security update from Microsoft over the web the machine did not boot.
On another machine the security update was installed. After installing NI-CAN 1.6.0 the machine booted but hangs during logon. On this machine we installed Windows NT, MS IE 5.5 the security update and NI-CAN from new and the effect was the same.
Does anyone else have similar experience with this problem?
Machines with Windows 2000 and XP work well with NI-CAN 1.6.0.
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Hi,
I haven't found any known issues. I going to try it out here. What's the security update you're installing?. I noticed there's a bunch of them in the Microsoft web site.
What CAN hardware do you have (PCI, PCMCIA, etc)?.
Let me know this details and I'll try to reproduce the problem.
DiegoF.
National Instruments.

Mac does not boot after installing bootcamp

hello
installed bootcamp on my mbp with snow leopard today,for the first time mac and windows both started with no problem ,but when i was trying to boot back into the mac again ,it did not boot and just got stuck at the process with turning wheel forever ,showing the apple logo and the turning wheel.
i did try to hold the option button and chose the mac partition ,but again i can not pass thru the turning wheel and apple logo.Does anybody know what the problem is and how can i go beyond this .
thanks.mike

Csound1 wrote:
Have you tried a safe mode boot yet?
Reboot to the OSX partition and hold the shift key down as soon as you hear the chime. You can release the shift when you see the spinning gear wheel.
yes,i did try that too.unfortunately ,hard drive seemed to be the source of the problem.just replaced the hard drive with a brand new one and put this one inside a usb enclosure that i have ,so tomorrow i will get a backup first and then format it again and keep it for the future.
thanks.mike

Satellite Pro L300 - Windows does not boot up

Silly person that i am, and being computer illiterate i turned off my laptop while it was downloading updates.
Now, when i turn it on it gives a black screen with 2 options for startup.
1 for start in repair/restore mode,
1 for start windows normally but neither work.
I made the recovery discs after i purchased the laptop but i am wary about using it.
Though i dont do a lot of work that needs backing up, i only surf the net and do emails.
Are there any other safer options for starting up?

Hi
If you have no important data on the HDD then you can use the Recovery disk in order to reinstall the OS again and to set up the unit back to factory settings.
The recovery disk will format the HDD and will erase everything from the HDD.
The installation procedure does not take a long time you need to boot from Recovery disk and have to follow the instruction on the screen. Thats all!
Greets

Windows 7 not booting after memory upgrade ProBook 6540b

Hi
HP Probook 6540b
Windows 7 Professional 64bit
Currently, I have 2x2GB of RAM and I want to upgrade it to 2x4GB. After replacing the 2GB sticks with the new 4 GB sticks, the notebook does not start anymore. I bought the right kind with right speed (DDR3 1333MHz 10600 9-9-9-24 SODIMM) and BIOS shows the correct amount of memory but it gets stuck at "starting windows" screen. I've upgraded the BIOS to latest version... if i put the older 4gb (2x2) sticks back in there, it boots just fine. Memory was new and never even used. The memory diagnostics tool doesn't show any errors either, i.e. the test passes without errors.
Any ideas? Thank you for the help.
Regards
Martin
This question was solved.
View Solution.

Hi,
Definitely you bought non supported RAM. Please check the following and compare the source of your RAM:
http://www.crucial.com/upgrade/HP+-+Compaq-memory/HP+Business+Notebooks/ProBook+6540b-upgrades.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

MBP 15" 10.6 does not boot up from Installation disc, why??????

Good day,
my question is simple, so please let the answer be simple:
I have done partition on my MBP today, in order to give me more redundancy in case of a Hard drive failure. I witnessed one yesterday on a brand spanking Imac--> not pretty--> the white screen of death!! I thought I´d better cover myself and I split my HD in two--> no probs.
Anyways, I decided to try to boot from my original installation disc--> 10.5.7, Leopard.
I booted while pressing "C", or holding "Option"……and always ended up with the same thing:
It just takes me to a language selection screen, I selected my language, and then it takes me to the software installation--> but I don´t want that--> I just want to reboot from my disc--> as a general test. (Just in case of that dreaded white screen, one day!!)
So, I went to to "Stop installation" in the menu above, and I chose "Reboot" and then I chose my installation disc--> and again and again, it just takes me back to the language screen etc etc etc!!
It´s like a Merry go Round………….
What am I missing??
My Snow Leopard installation disc does exactly the same, by the way…………..
Cheers,
MXP 150 Patriot

"perhaps I didn´t explain myself properly:
I would like to boot up from my installation disc, in other words, being able to log in and see my Desktop etc.
All I get from my disc is an installation menu (after the language selection) and if I try to boot up from there (to my desktop / background etc) by selecting "stop installation--> start up disc".........it goes back to the language selection and the software installation........just where I was 3 minutes ago!
What am I doing wrong?
My friend booted up the other day from his FireWire external hard drive and he got everything, SO quick! His personal desktop, everything!
Hopefully you can tell me what I´m missing........."
You're missing the point. When you boot from your installation disk it's to install the OS and/or repair the disk and check the hardware, etc.. Your friend has a bootable external drive. he used the OS Installation disk to create that.

Windows does not boot on new motherboard

Hi everybody.
I am lost here.
I made an upgrade to my PC: replace motherboard, CPU and RAM. Keep everything else.
I went from a celeron400 w/ intel chipset to 865 neo-2 PFISR.
The BIOS run fine. I can boot on CDs. But windows refuses to boot from c:. It looks like the MBR is fine, because I get the screen that says: "windows failed styarting, how do you want to start, fail safe mode or normal mode?" From here, any option I choose reboots the PC very quick.
I think the problem is that the geometry (CHS) of my disk is wrong. But I don't manage to find the correct values.
Does anyone has any idea of what is going wrong?
- The hard drive is a 15GB IBM DTLA 703015 (desktar 75GXP)
- I don't want to format everything....
- The drive still works on other computers.
Additionnal question: any link to installation of Windows XP pro on a SATA disk?
Thank you for any idea you might have!

In bios under Integrated Peripherals, On Chip ATA Operating Mode set
Native Mode
ATA Configuration - PATA only
SATA Keep enabled - yes
PATA Keep enabled - yes
PATA channel selection - both
You can't boot using a hard drive with windows installed on a different motherboard. There are too many differences to be successful.
Connect the SATA drive to SATA1, don't connect any PATA drives, and use the settings above. After you install Windows you can connect up the PATA drives (if any) to use for data.

Tecra A11-11N does not boot after CPU upgrade

Hi,
I would like to do a processor upgrade for my Tecra A11 11N from the i5-430M to a probably much faster i5.I thought the i5-580M would do, but the laptop did not boot when i installed this processor.
I reverted back to the 430M, did some research on the internet and found out that the 580M has a very high FSB speed and that is what probably made it not to work/incompatible with my machine.
http://ark.intel.com/products/43537/
http://ark.intel.com/products/49653
http://ark.intel.com/products/49652
and also at http://ark.intel.com/
Now i went back to the computer shop,returned the 580M and got an i5-560M as i compared it's specs and saw it would be compatible as it has the same FSB speed with the 430M.
I then later on in the day tried to install this cpu as an upgrade BUT alas!
It STILL WON'T BOOT ALSO.
I was left dumfounded.Processors in the same familly line are supposed to be compatible with one another provided:Lithography, FSB and socket type are similar.
Or what am i missing here?
I have done processor upgrades in many instances for both desktops and laptops and this is the first one that has left me with no words to say!
please offer some help/advice.
Simon
+Message was edited+

I solved this processor upgrade problem on my own.
I did some little research on what limits processor upgradability on computers and i
found out that BIOS was one of the factors that play a key part.
So,i went on a mission
to see if i could upgrade my BIOS and whether it would solve my problem.
I found this link to be very informative:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=66624
I then downloaded the latest BIOS version for my laptop from this link:
http://uk.computers.toshiba-europe.com/innovation/download_bios.jsp
The following link gave me proof that the BIOS update would not bring any problems to my
machine and that there is already someone who had done it and not encountered any problems.
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=62459
Just to make sure that you are on the safe side,before carrying out the procedure to update
your BIOS,make sure you have a fully charged battery in addition to the AC plugged in.A power
outtage during this procedure would instantly kill your machine.
The BIOS installation took less than 3 mins.I copied the executable on the desktop and run it
from there.
On rebooting,the new BIOS was installed.The new BIOS version was 3.40 dated on 05/18/2012 while
the older one was version 2.0 dated on 04/03/2010.
From Intel's website,the i5-430M was released on Q1 2010 while the i5-560M and i5-580M were
released on Q3 2010.
It is pretty obvious that by the time BIOS version 2.0 was release,these two newer processors
had not been released and that explains why they were not being recognized when i installed them.
I finally swapped the 430M with the 560M,assembled back the machine and powered it.
Voil!,the machine booted to it's new life.Everything is as was before!
So far i have not seen any problems even to do with overheating or the cooling fan spinning any
faster that before.It is all the same as before.There is considerable performance gain with the
uprade.I am a software developer and my various development enviroments including compilers,
debuggers,database and deployment servers have all been running way way faster than they were!
I believe the 580M can also work but unfortunately i had returned it back to the shop.
There is no reason for buying new machines when we can upgrade the ones we have.What will
happen to the older ones?This means more electronic waste and so does new machines.Let us try
to make better use of the ones we have a in turn,SAVE OUR ONLY PLANET EARTH FROM GLOBAL WARMING!

Windows 7 does not boot after bootcamp installation

Similar Messages

Maybe you are looking for