Windows 7 does not detect & install HP Colorlaser 2600n printer connected to wireless network
I have an HP Colorlaser 2600n printer connected to a router set up for my wireless network. I have tried to installed the printer through the wireless network, as I have done with other computers, but my new HP dv7 laptop does not find the printer in the network. Just to check, I installed the printer directly to the laptop through an usb connection and it work, but nothing I have tried has work to access the printer through the wireless network. If I use HP installation CD and check network installation, the setup program does find the printer, but once I finished, the printer does not appear in "printer and devices". Any suggestion on how to solve this situation? Thank you in advance for your help!!
Download and run this: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
Your security system's firewall is likely in the way.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP
Similar Messages
-
Thinkpad Edge S430 - Windows does not detect external display connected via HDMI
On a Thinkpad S430 with HD4000 integrated graphics, an external display connected via a HDMI cable is not detected at all when using Windows. The system is fully updated as of the time of posting this message, both via the Lenovo Update tool as well as Windows update.
The Intel driver version is 8.15.10.2696. It appears that this is the latest version, since it does not offer an update when I try to auto-update it via Device Manager.
NB: I am running Ubuntu 12.04 with kernel 3.4.0 on the same machine, and the external display works perfectly fine with this software configuration.
Hence I think that it's very likely that this is a Windows-specific driver issue.
Would Lenovo happen to have a driver update in the works? Alternatively, I will be thankful for any suggestions about possible resolution of this problem.skn2011 wrote:
My Macbook Pro notbook 13.3" does not detect external display throught it's mini display port to HDMI connector when connected to Sony Bravia 32" LCD TV.Can anyone help me get the answer as i tried reading everywhere on internet and none does not seems to work.Please help me out guys.
Are you using the Apple adaptor or a 3rd party -
Win 7 System Health Report Does Not Detect Installed Antivirus Applicatio​n
Hello all,
To test your PC for this problem go to: Control Panel > Performance Information and Tools > Click on the Advanced tools link (top left menu) and then click on the Generate a system report link (at the bottom of the page). Now, about 60 seconds later, your report should be completed and you should be able to see if your antivirus was detected (or not).
In my case, it was not detected (as is the case for many other Win 7 users), so if that bugs you and you want it fixed, please follow this link to obtain a temporary patch from Microsoft: http://support.microsoft.com/kb/2482947
Please note the Microsoft cautions and recommendations before downloading and installing.
Good luck!
Solved!
Go to Solution.Hope the above solution helps others who are experiencing the same isssue.
-
Windows does not detect Base Station
Hello,
I have a Laptop on XP that will not detect a base station. I have run AirPort assistant and Administrative Assistant, but it will not show up? How do I get it to detect the base unit on AirPort Express?
Thanks
Fujitsu & iMac Windows XP Fujitsu N SeriesIt will say that if you are not connected to a network.
Your laptop should be able to see the wireless network even if it is not connected to it from the wireless icon in the system tray.
iFelix -
Windows does not detect my sound card
Hello, I have a thinkcentre m58p dt. I had to reinstall windows(same version which was already installed before) but since I did it integratedsound behaves a strange way. Windows detects it and it appears in the device windows menu. I can use headphones but I can’t use the speaker like I used to do. Windows says the device is not connected.
Spinedoc,
This problem may be caused by the USB ports on your system not providing the required amount of power at device start. There are a few ways to get around this problem:
) Make sure that you have all of your motherboard, chipset, and USB updates available for your system installed.
2) Go into Device Manager/Uni'versal Serial Bus Controllers and double click on one of your USB root hubs (or USB 2.0 root hub). Go to the power management tab and take the checkmark out of the top option that says to allow Windows to disable power to the device. Repeat this for all the root hubs.
3) If none of the others work, then you will want to try the card on another system, or with a powered USB hub to ensure that there is no problem with the sound device itself. If it works on another system then you will want to try it with a powered USB hub on the system in question.
Jeremy -
Windows does not automatically install legacy PCI device
I am using labview 8.5
I made an installer that includes both NI-VISA and the traditional(legacy) device drivers.
However, when I put in the card (PCI-6023E), windows Vista wasn't able to locate the drivers.
Is there a way to set it up so this is automatic? If not, what are the drivers called so I can manually select them from the hard drive?According to this page, VIsta requires that you use DAQmx, not the traditional drivers, for the PCI-6023E. Last I heard the traditional DAQ drivers are not compatible with Vista, nor are there any plans to make them compatible with Vista.
Note: Switching to DAQmx will, of course, require you to change your code.
Message Edited by smercurio_fc on 09-23-2008 03:47 PM -
Aperture does not detect CF Card
I am using Aperture 2 with my Canon EOS 30D. I used 2GB Sandisk CF cards and have had no issues ever. Recently I bought a 4GB and 16GB CF card and for some reason Aperture/Mac does not detect these cards. When I connect my camera via USB to my macbook, and click import, it does not show my Canon as a drive available to choose pics from. With my 2GB card it does.
Any ideas?Does the card show up in the Finder? I suspect this isn't an Aperture issue.
-
[SOLVED] Kernel over 3.14.4-1 does not detect my hardware proper
Hello everyone,
i've a little problem with any kernel higher then 3.14.4-1.. After a long time, i bootet up my PC and updatet Arch. There where nearly 350 package updates. Everything went fine, except for the kernel update.
Updating to kernel 3.16.3-1 broke nearly everything on my system. Arch boots but does not detect any hardware like the graphics card or the network adapter. I've read journalctl but can't find any usefull hints or a point do begin my error searching.
Maybe someone of you can give me a useful hint…
Here is a link to the logfile: http://p.tkolb.de/SpGKcAQjxk1A.txt
Thank you very much in advance for your help,
Sqozz
Last edited by Sqozz (2014-09-29 17:45:46)I've reverted to the last working kernel with "pacman -U".
Could now find the Problem: /boot was not mountet during the kernel build.. Such a stupid mistake.
Thank you anyway for your fast replies! -
Can't install Win 8 - Satellite Pro C660 does not detect HDD
Hello,
My HDD has died, so i decided to upgrade my Satellite Pro C660-1D9 to an SSD.
I made a bootable USB with Win8, and booted just fine.
The problem is that it does not detect my SSD so i can proceed with the install.
SSD shows up in BIOS, but not in Windows install.
It says there's a driver missing.
I downloaded AHCI drivers (XP, only ones available) and even then, after selecting the only driver that appears, it says no new devices found.
I tried changing SATA mode from AHCI to Compatibility mode and it's the same..
What can i do?
Thanks for the help.
Best regards,
Bruno MoreiraOlder Windows XP required an AHCI driver from Intel but I think this isnt a missing SATA driver issue because as far as I know Windows 8 as well as Win 8.1 already contains the drivers in order to recognize the HDD or SSD drive.
Furthermore the OS installation should be possible even if the driver would not be added... for this procedure you have to use the "compatibility mode".
As you said, the compatibility mode did not work too, so I think there is another problem.
However, Toshiba driver page provides also an Intel RST (Intel Rapid Storage Technology) driver (Windows 8 - Upgrade) which you could try to add while OS installation.
But Im wondering if you would be able to install this Win 8 on common SATA HDD.
Did you try to format the SSD drive using another computer and then to install Win 8?
Try it out. -
Windows 7 does not detect network hardware
Using Boot Camp, I installed Windows 7.
After restarting the computer it does not detect network hardware.
So I cannot connect to my Wifi.
What should I do?Did you download and install the Windows Support software? It was the first menu item when you ran Bootcamp Assistant. If not, run Bootcamp Assistant again and select the menu item to download the Windows Support software. Read the Bootcamp Installation Guide. http://www.apple.com/support/bootcamp/
-
ITunes V12.1.2.27 on Windows 8 does not detect iPhone 6 with IOS v8.3
Hello there,
It all began when I installed the latest IOS 8.3 and iTunes V12.1.2.27. iTunes simply does not detect my iPhone 6 any longer, but it does detect my old iPod mini. Everything used to be working just fine until the software update was done.
I've run thru all the steps on the Apple support page and spent over an hour on the phone with customer support. Checked the Apple mobile device driver, deinstalled iTunes, reinstalled iTunes, changed connecting cables etc etc. Nothing works!!
Help!
LESexact same issue. And I can be TOTALLY sure it is related to the update since I was at the birthday party of my little nephew taking photo and everything were just fine. Then my brother asked me if I had already updated my iPhone. I said no and then I updated it while I was still there. From the moment the phone ended the update, I ended taking photos... The update screwed the camera focus mechanism somehow. I'm trying to downgrade to 8.1.3 and see if it will be back to normal. In this case it is a software issue, otherwise it will be a hardware failure caused by the update. I'm dowloading 8.1.3 ipsw right now.
-
Surface Pro 3 / "Windows did not detect a properly installed network adapter"
Hi all,
I've been running the Windows 10 Technical Preview (9926) on my Surface Pro 3 successfully
since January. Unfortunately, I lost all internet connectivity today.
The problem started when I noticed the type cover wasn't working (pressing keys on the type
cover wasn't registering any typing on my screen) and my USB mouse wasn't working either. I tried removing and reattaching the type keyboard but this didn't fix the issue. I had to use the accessibility on-screen keyboard to sign into Windows (thankfully touch
was still working). Once I signed in, I still didn't have typing or cursor ability, so I decided to restart the computer.
Then it got worse. I noticed the Surface Pro 3 was stuck on "restarting" and wouldn't
actually restart. Since it wasn't responding, I held down the power button for about 10 seconds until it turned off. When I turned it back on, the type cover and mouse started working again.
Unfortunately, this is when the WIFI problems began. I had WIFI for a few seconds, and then
I lost internet. I disconnected/reconnected but there was a yellow triangle telling me there was some sort of problem. So I restarted the Surface Pro 3.
When it came back on, there were suddenly NO connections available at all. Opening the "Network
& Internet" settings page gave me the message "Windows did not detect a properly installed network adapter". And here I am, without internet on my Surface Pro 3, borrowing my friend's computer so I can type this message (he is also running
Windows 10 build 9926 on his laptop and is able to connect to my WIFI with no problems, whereas my Surface Pro 3 cannot even detect any networks). I have not dropped or damaged the SP3 in any way, and there have been no storms or power outages or anything
of that sort. Any ideas what could have happened to the WIFI on my Surface Pro 3?
Thanks for your help...
EthanHi Ethan,
Currently, there are a few compatibility issue between the current hardware and Windows 10 Technical Preview (9926 build), this is mostly related to driver compatibility issue.
I suggest you download the latest network adapter driver package to install, when it is finished, check if it appears under Device Manager.
Surface Pro 3, Surface Pro 2, and Surface Pro firmware and driver packs
https://www.microsoft.com/surface/en-us/support/networking-and-connectivity/install-wireless-drivers
You can check if you can install the latest firmware package for your device.
Here is an article to talk about such things:
Windows 10 January Technical Preview on Surface
https://www.microsoft.com/surface/en-us/support/install-update-activate/windows-technical-preview#Known
Regards,
Alex Zhao
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp text, it wont let me. Just sounds the ding, alert, can still slightly navigate the program but can not use any other tools after clicking warp text. I just have to open task manager and close the program. not sure if I'm doing something wrong or maybe I just need to uninstall and re install. Having trouble finding out how to uninstall and reinstall because the program came pre installed on my desktop.
It actually sounds like the warp text window is opening off screen.
Resetting the photoshop elements 10 preferences should fix it.
*Press and hold the Shift+Ctrl+Alt keys just after you start the launch of the photoshop elements 10 editor
*Keep holding the keys down until you get a dialog asking if you want to delete the adobe photoshop elements setting file
*Press Yes -
Just got a second hand iPhone 4s and tried to connect to iTunes on laptop running windows 8.1 does not detect iPhone, iPad or iPod. Can any help please? iPhone is version 7.1 and running latest itunes
Hello HungryHoover,
It sounds like you are not able to see any iOS devices in iTunes on your PC. I recommend the following article to help you troubleshoot that named:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Thank you for using Apple Support Communities.
Regards,
Sterling -
i'm using a fresh install on 10.10. why when i click the finder icon in the dock a finder window does not open?
ok, i forced quit the finder, and now when i click on the finder it opens a visible window... where did this bug come from?
Maybe you are looking for
-
I rarely use iTunes, prefer, for obvious reasons to own physical media (which is prompting this question). But I do have an iPad 4 so I have to use it. I bought a movie on iTunes and have downloaded it to a new brand new Windows 8 laptop. I am gettin
-
Folio overlay doesn't display correctly on tablet
I have made an interactive animation in Edge Animate, and put it in an InDesign publishing document as a folio overlay. The overlay looks fine in the desktop content viewer, although I can't zoom in or interact with it as I should be able to on a tab
-
I'm new to GIS development, and hereby got a performance comparison. Techs adopted time consumed to display the whole map in one time ESRI SDE + Oracle Spatial 6 Mins ESRI SDE + Oracle 1 Min 20 Sec ESRI SDE + SQLSERVER 50 Sec ESRI SDE + Shapefile 30
-
How do i stop pop in adverts appering when im on hotmail
i dont like advertising for partners poping onto my screen whist im on hot mail
-
Maximum number of infoobjects in rows and columns?
Hi all, Please tell me what is the maximum number of characteristics that can be included in the rows and columns of a query? Thanks in advance