Windows 7 doesn't list Macintosh HD

Hello everybody,
Today i discovered a strange problem:
When i am in windows and i try to access my mac partition, it suddenly doesn't list the "Macintosh HD" anymore.
I have bootcamp installed, running a 64 bit windows 7 version on a 2011 macbookpro.
Everything worked fine until today. When i restart the computer and keep the "alt" key pressed, i am still able to boot mac OSX. All my files are there, also i am able to boot windows as usual, only with the problem that the Macintosh HD doesn't show up anymore.
I tried to assign a Name to the hard drive in the disk management (which is listed there,only without name), as this has been suggested in other forums, but the option "change drive letters and path" is grayed out .
Every suggestion is highly appreciated !

Nevermind,
updating macdrive solved the problem.

Similar Messages

  • Snow Leopard finder doesn't list all files on Windows 7 volumes

    From my Macbook Pro (10.6.8), I can connect to my Mac Pro, while it is running Windows 7 in Boot Camp, in order to access the Mac Pro's 6 volumes (1 Boot Camp, 5 Mac volumes). This is using SMB via Finder's 'Connect to server…' on an Airport network.
    However, Finder never displays all the files and folders on any of the Mac volumes it connects to through Windows 7. It seems to show approximately the first 18-9 files and folders, and then nothing. The same applies when I open a nested folder — it doesn't list all of its contents.
    Any ideas as to what's causing this and how I can fix it? I have searched all over but can't find any answers yet, so I'm hoping someone here has seen this before.

    Thanks for the reply, but I do have the Restore Windows box checked (see below). And the Resume features info (cnet link) only addresses how to turn the feature off, either selectively or globally. I'm simply looking for the functionality that I had with Snow Leopard and now seems to be absent. Maybe it's a bug in my Finder.

  • How to handle RunTime Faults which doesn't list under System Faults?

    Hi,
    I have a doubt regarding runtime faults in BPEL 1.1.In BPEL 1.1 some of the run time faults are categorised as system faults.So we can handle those run time faults
    using the faultname or namespace(http://schemas.oracle.com/bpel/extension) of system fault itself.But 'SublanguageExecutionFault' is a run time fault which doesn't list under system faults.
    So what namespace it belongs to?Can we use the same namespace of system fault for this kind of runtime faults ?
    Are any other runtime faults existing which don't have the same namespace of sytem faults?So how can we identify and handle those run time faults?

    You can create a role menu as remote enabled remote menu.
    The authority checks will happen on the remote side, also against objects which don't exist in the calling system as the music is on the other side.
    On the RFC client system side, you only need the parameter transaction to start the remote transaction in the remote system.
    See the documentation on SYST function module ABAP4_CALL_TRANSACTION.
    This is however a rather antiquated technology... it is more popular to use a SAP Portal or webdynpro applications for this sort of thing (the user does not notice the difference) or later versions of such integration such as Fiori UIs or imbedded links within the Business Client.
    I don't want to lean out the window too far, but the buggy phase of these new things is approaching an end and they are usable if you are on newer releases. Then you can pool the menu and use APIs for navigation and no more irritating S_TCODE checks.
    Cheers,
    Julius

  • New laptop, ipod doesn't list music

    We set up a new ipod on a desktop then a few months later bought a laptop with vista.
    When plugging the i pod in it shows the user name but doesn't list what music is on the i pod.
    Memory at the bottom does indicate music saved as memory has been used.
    Also I wasn't able to transfer music from I tunes to I pod
    Are there any suggestions as to what is wrong.
    Thanks in anticipation.
    Al

    Have you downloaded the newest iTunes for Vista ? Maybe it will help !
    By the way, a problem I have with my iPod Shuffle 2nd Genr is that whenever I reinstall my Windows XP and plug in the iPod, iTunes asks me to erase and sync the iPod with the music folder !!! This FORCES the iPod to delete all my music ! Anyone knows how to solve the problem ?
    Thank you !
    Danny

  • GPO don't run specified windows applications doesn't work to in win 8.1. any ideas why?

    GPO "don't run specified windows applications" doesn't work to in win 8.1. any ideas why?  it is enabled and list of progs is entered however I can still run all progs on list.  This is a local machine not on a domain.  I must
    have this work to disable games, IE, MSpaint, etc.  Computer has been restarted since enabling the GPO and also have enforced the GPO via CMD prompt.  worked fine on windows 8 and 7.

    Any success ?
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • After Udateing to IOS 5 my Windows Explorer doesn't see the photo folder on my iPhone

    I use my iPhone at work to take pictures and upload grab them off the phone folder.  I can charge my phone using the USB connection But I'm not allowed to install iTunes on my work computer and I do not wish to use iCloud at this time. Now that I've upgraded to IOS 5 Windows explorer doesn't see a folder for photots?!  How can I restore the ability to grab photo's off my phone using the Windows explorer?

    I can't see Calendars list (iPad-1)
    ...invitations/download button on the lower right.
    where this buton?
             Lower right.  The downward arrow pointing into the horizontal brackt that looks like
              this on its side:  ]

  • Windows vista doesn't recognize ipod touch

    can anybody please help me! I'm trying to connect my ipod touch 2nd gen to my comp and windows vista doesn't install the software. I've tried to install the 32 bit & 64 bit versions of itunes but nothing works. On the 32 bit install, it goes all the way, seems like is installing, but at the end there's a pop up that says, windows installer service it's not installed or something like this....does anybody know how to help me? what to help me?....when I install the ipod touch by itself onto the computer, the computer sees it as a camera...anybody please, help me!
    Thanks!

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests

  • After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • HT1719 My itunes doesn't list "devices" above the playlist.  How can I sync the music I have purchased to my new ipod shuffle if it doesn't give me the option?  The shuffle is plugged into my computer, but nothing happens.  Help please!

    My itunes account doesn't list "devices" above the playlist, as the syncing instructions give.  How can I sync the itunes I have purchased & downloaded to my computer, to my ipod shuffle?  The device is plugged into my computer, but nothing happens.  Shouldn't the computer recognize the device? It doesn't.  Please help!

    As a test, shut down your computer and disconnect ALL USB devices.  Do this procedure to Reset the shuffle
    http://support.apple.com/kb/HT1655
    Start up computer with nothing connected, except for standard keyboard and mouse (if it's not a laptop).  Run iTunes.  Connect shuffle to a direct USB port on the computer.  See if there's any improvement,
    If the shuffle is now recognized, there may have been a USB device conflict previously, or maybe all of the devices connected at the same time overloads the USB bus (for power).  An iPod charges its battery while connected, so it is a high-power USB device.

  • I have Windows 7 main library, iMac with additional library and Apple TV that I want to use home sharing, but windows library doesn't show as a computer on Apple TV.

    I have music and movie library on an external drive connected to a Windows 7 machine. I also have home movies and other content on an iMac that I use.  I want to turn on home sharing for both and connect them to Apple TV for display, music and podcast.  They are all on the same wifi home network, but the Windows library doesn't show up on the ATV device.
    I turned off all Windows firewall and I tried to configure port forwarding, but that didn't help.
    I will say that this did work at some point, so a patch or an update, or some configuration change has caused it to stop workin at some point in the past six months to a year.

    Hello, aquilinofromtuckahoe. 
    Here is the best resource for troubleshooting steps when experiencing issues with Home Sharing. 
    Troubleshooting Home Sharing
    http://support.apple.com/kb/TS2972
    Regards,
    Jason H. 

  • Windows PC doesn't recognize iPod

    I have bought my iPod (20GB, click wheel) one year ago with an extended warranty of 3 years. It was working well all the time. But now my Windows computer doesn't recognize the iPod any more although I haven't changed anything on it.
    The battery can still be charged using the docking station. But as soon as I plug in the iPod on my laptop USB port the iPod freezes. The only message on my laptop screen says that the external hardware can not be recognized.
    The USB port is working properly.
    I have also tried to install the iPod update and to reset the iPod. Nothing is working. I guess I can't restore the iPod since it's not even recognized.
    Thanks, Annemarie

    I thought I was alone with this problem. I recently went traveling last weekend, and began to think the X-Ray machines killed my iPod!
    Whenever I connect my iPod to any computer using the USB connection, Windows will not mount it as a removable drive. The cable is good, because the iPod is being charged but Windows will not recognize it.
    I have tried all the different USB ports, even on several different computers. Including my work, laptop, and my desktop. Windows will not recognize my iPod using the USB connection.
    I'm in the process of restoring my desktop computer after a hard-drive failure (lucky me all my vital data were on a separate drive), so my desktop has a nice clean install of Windows.
    My desktop has a firewire port, so I tried connecting to that port and Ta-Da, Windows recognized and mounted my iPod as a removable drive! Unfortunately my laptop nor my work computers do not have firewire ports.
    Can anyone explain why the USB function suddenly stopped working? Does this mean I need to restore and loose all my music from my iPod? I do not let iTunes manage my music, I do that all myself. I can put my music back onto the device but it will be time consuming. If anyone knows the answer to this USB problem, perhaps you can reply to this thread or contact me.
    Thanks,
    Joe Vill

  • Windows 7 doesn't recognize ipod touch 4g

    windows 7 doesn't recognize ipod touch 4g.  I have restarted my computer and it doesn't work. I tried it yesterday and it work. I have tried it on my laptop and it recognize it. so what the problem?

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests

  • Windows vista home premium iTunes window size doesn't fit properly

    I am using windows vista home premium. In iTunes when I maximize the iTunes window, it doesn't fit the screen, it is a little too big and I cannot see the side scroll bar. To fix it, I have to restore the window, manually modify the size and the maximize it. Is there a fix to this? Or is an unknown little bug?

    Have you checked the HP Website and Microsoft Support websites to see if they have any solutions to your problem? Since there could be multiple things causing this, I would check at the places I mentioned first and see if their knowledge base contains an answer.
    *******DISCLAIMER********
    I am not an employee of BBY in any shape or form. All information presented in my replies or postings is my own opinion. It is up to you , the end user to determine the ultimate validity of any information presented on these forums.

  • Itunes doesn't list all of my recent podcasts. My show is Black Tribbles and it only shows episodes through March 2013, however we do at least two shows a week and they aren't listed. The feed works because the show update to my computer. Help please.

    Itunes doesn't list all of my recent podcasts. My show is Black Tribbles and it only shows episodes through March 2013, however we do at least two shows a week and they aren't listed. The feed works because the show update to my computer. Help please.

    Your feed is at http://blacktribbles.podomatic.com/rss2.xml
    When subscribed to in iTunes the recent episodes show, but the Store hasn't updated for some time.
    There appears to be an issue with the feed. In the episode 'WRESTLING MARCH MADNESS: Final Bracket & Championship' of 31st March you will find in the 'description' tag the following line:
    4. KURT ANGLE
    At the end of this line is an invisible character which seems to be wrecking the feed - although it works OK when suscribing in iTunes it won't load in a browser (and I also found the feed very slow to load, which won't help matters with the Store)
    This sort of thing usually happens when you paste text in from a word processing application and manage to include one of the invisible control characters. I don't know how easy it will be do do it in Podomatic but you should delete that entire line and retype it to remove this charter.
    You should keep an eye on the time it takes the feed to be accessed - if there is a long enough delay (and it was quite some seconds when I tried) the Store may well timeout and fail to read it. At the moment it's showing a cached version from the last time it was able to read it.

  • WINDOWS XP DOESN'T RECOGNISE USB FOR IPOD NANO 2GB

    HELP!
    We recently bought 2 i pod nanos in Florida, returned to the UK where we set about connecting them to our pc - pc doesn't even recognise the USB cable, but does recognise a friend's nano which we have tried. We didn't get a cd with the ipods, can someone please give us some advice? apple support website useless.
    Thanks in advance

    First of all, try another port on your computer. Some ports are not connected direct to the motherboard and do not recognize the iPod as well as those that are. Reset the iPod each time you connect it to another port.
    Then try with the iPod in forced disk mode.
    Putting iPod into disk mode.
    Still no joy, See if any of these articles help.
    Windows XP cannot detect an iPod.
    USB drivers are not installed properly or are out of date.
    iTunes 7 doesn't recognize the iPod.
    Your Windows PC doesn't recognize iPod
    iPod appears in Windows Explorer but does not appear in iTunes.
    iPod does not appear in iTunes.
    Fast user switching in Windows XP is not supported.
    Windows confuses iPod with network drive

Maybe you are looking for