Windows 7 driver for hp laserjet 1100

windows 7 driver for hp laserjet 1100

Hello Stoiko,
Thanks for the post. Depending on which model of HP LJ 1100 that you have, the drivers for Win7/64 can be located here: Good Luck!
HP LJ 1100
http://h20566.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?lang=en&cc=us&sp4ts.oid=14925
HP LJ 1100 All-in-One
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=12006&spf_p.t...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Similar Messages

Printer driver for HP LaserJet 4L with Windows 7

I cannot find the printer driver for my LaserJet 4L in Windows 7. I have a parallel to USB converter cable attached to my computer. I need the drivers.
Thanks.
This question was solved.
View Solution.

My Windows 8.1 Pro 64-bit system has a built-in driver for this printer model:
I don't know whether the driver is present on a fresh Windows install; it may only have appeared in the list after the Windows Update button was clicked on the above Add Printers dialogue, then waiting (perhaps for several minutes) whilst additional drivers were downloaded, and the list repopulated.
I'd assume that the same might be true of earlier Windows versions as well.

HP Toolbox FX Software and Driver for HP LaserJet 3052

Dear Sir,
I have lost my software driver for HP LaserJet 3052, currently I am using the printer (HP LaserJet 3052) with driver downloded from HP website. However, many features have dissappered. I can no longer able to print both side.
Where can I download the HP LaserJet 3052 driver software with fully features?
Where can I have HP LaserJet 3052 Toolbox software?
Thank you verry much.

Hi,
Make sure the Automatic Duplexing option is enabled:
Enter Control Panel > Devices and Printers.
Right click the printer icon, then click Printer Properties.
Click the Device Settings tab.
Set the Automatic Two-Sided Duplex Accessory as installed and click OK to save the change.
The HP Toolbox FX ( as part of a Full Feature Software) is not compatible with Windows 7 but only a UPD solution, full functionality is only available uisng compatibility mode with the Windows Vista software but for a 32-bit OS only, not for a 64-bit OS:
http://h20566.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c02096212
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Printer driver for HP Laserjet m1132

I've recently switched to a mac with everything updated (version 10.9.5) and I'm trying to install a driver for printer laserjet m1132.
I followed each and every steps: system preference > printers and scanners > selected + > (selected the printer)
after selecting the printer another window popped out with list of printers, i selected the printer but then the "Add" button just got greyed out. And there's also a dropdown menu where i had to select to driver by myself, which i can't since i can't download the driver.
Any ideas?

Hi @joeyyoo007,
I see that you are having issues with getting the printer installed on 10.9. With a few steps, we should be able to resolve this issue.
Connect the printer directly to the Mac, by a USB connection. Run the Apple Updates to install the printer drivers.
I have provided a document on how to setup the printer on the Mac.
OS X v10.9 Mavericks: Installing and Using the Printer on a Mac.
If you are still having issues, please do the following steps listed below:
Repair the Disk Permissions on the Mac:
Close all applications.
On the Apple menu bar, click Go, click Applications and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left.
Click Verify and then Repair Disk Permissions.
Restart the computer.
Reset the Printing System:
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Click the Apple icon ( ), and then click System Preferences.
Click Printers & Scanners.
Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system.
Try adding the printer again from the Printers and Scanners window.
If the driver fails to install, download and install the HP Printer Drivers v3.0 for OS X.
Let me know how you make out.
Have a nice weekend!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Scan driver for HP LaserJet 1536dnf MFP

Hi! Could anybody provide a driver for HP LaserJet 1536dnf MFP for scanning that it really work?

Hi! Unfortunately Your advice does not work. I have downloaded the full feature software Your dirrected, however I can not install it. I run the full feature software hp_M1530_MFP_full_Solution_usb_n_w.exe (find enclosed picture 1.jpg, please). It reaches 99 % of installation (2.jpg) after 14 minutes. Further after 3 min. I get an error message (3.jpg) “An install operation took too long to execute. This a fatal error preventing product use. Please restart your computer, and run this installer again”. After restart of computer, I get a message “Installing device driver software” (4.jpg) and “Your device is ready to use” (5.jpg). Despite that, the scanner does not work, and there are some dysfunction’s with the printing. We have two such printers, and both encountering with this problem. Could you help, please?

Printer driver for HP Laserjet 1600

Just purchased a iMac and I need a printer driver for HP Laserjet 1600

Hello Dwayne99,
Just a thought here, there may be some 3rd party drivers that would available for your HP printer. Good Luck!
http://hintsforums.macworld.com/archive/index.php/t-74542.html (Thanks Macworld)
http://mattgadient.com/2009/01/18/mac-os-x-drivers-for-the-hp-color-laserjet-160 0/ (Thanks Mattgadient.com)

Need HDCP-recognizing Bootcamp Windows driver for MacBook Pro's screen

I need a Bootcamp Windows driver for my MacBook Pro 15/Retina (MBR) that recognizes that the MBR's built-in screen in HDCP-compliant. The current Bootcamp drivers for Windows do recognized HDCP on an external HDMI-connected display, but do not recognized HDCP on the internal display.
BTW, I've read some statements that Windows drivers don't recognize HDCP via DisplayPort connections, so I wonder if Apple is using internal wiring that acts like it's a DisplayPort connection?
Please do not suggest things that only enable disabling DRM HDCP protection from Blu-Ray discs. I need a solution that to cooperate with DRM HDCP protection for content from live tuners, not from a Blu-Ray or DVD disc.
My application is using Windows Media Center (WMC) to play streaming content from my Silicon Dust HD HomeRun Prime (HDHR3) cable TV tuner on my MBR's built-in screen. This works fine with an external HDMI-connected (HDCP-capable) display, but I also want to get this working on my laptop's screen for when I'm stuck in bed (illness, bad back, etc.). The only application Silicon Dust offers for viewing HDHR3 tuner output on Windows (or any platform, as far as I know) which supports all protected cable channels is WMC, and WMC relies on the Apple-provided Windows NVIDIA drivers for HDCP capability. The NVIDIA Control Panel explicitly recognizes my external HDMI-connected monitor's HDCP capability, but does not recognize the MBR's internal screen has having any HDCP. This causes WMC to prevent the display of any TV channels at all from the HDHR3 when the only screen is the internal one (and it blocks DRM-protected channels if both screens are active in parallel).
I'm thinking that the best solution would be an NVIDIA driver for the built-in GeForce GT 650M for Windows 8 (or 7) which recognizes HDCP capability via DisplayPort. Is there anything like that? Or, alternately, some add-in driver that adds a layer of HDCP capability recognition to the standard drivers?
Is there any currently-available solution? . . . something that will enable the internal screen to play all the tuner's cable channels including DRM-protected ones (either on Bootcamp'ed Windows or on the OS X side)?
P.S. -- FYI, the only other potential app I've read about for using an external tuner with a MacBook is an OS X version of MythTV, but (a) that requires an excessively long list of geek tweek steps (install an SQL application, create an SQL database, do lots of command-line tweaks, add & configure a backend app and then a frontend app, ... ) and (b) even then it seems it doesn't support channels that aren't marked "copy-freely", i.e., HDCP-enabled DRM protected content.

Strange -- sig's comment seems gone now. I wonder why.
Anyway, I did try the latests NVidia drivers yesterday, afterall they explicitly say they added HDCP over DisplayPort, but no joy. In the NVidia control panel (for Windows), external displays via HDMI have a left-menu section for HDCP that explicitly shows it's working, but there is still no such indication for the internal display, and I am still unable to use WMC with HD HomeRun Prime cablecard tuner to play anything on the screen except channels that the provider marks "copy freely" (e.g., Bloomberg news channel 722 isn't playable, but MSNBC 723 is playable).
My guess is that maybe laptop internal displays don't explicitly have internal DisplayPort and HDCP technology but have some kind of exception that normally allows playback?
As an alternative I wish there were cablecard tuner playback software on the OS X side that could play more than "copy freely" cablecard-tuned material, but there doesn't seem to be anything comparable to Windows Media Player that supports that. (Now it should be clearer why this discussion belongs under MacBook Pro and not under Bootcamp where the moderators moved it.)

Driver for hp laserjet 1215???, driver for hp laserjet 1215???, driver for hp laserjet 1215???

im searching a driver for hp laserjet 1215???

This printer doesn't seem to be supported in ML:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01664444&lc=en&cc=us&dlc=en &product=412187#N2043
You could try the 1515 driver or use the Generic PostScript Printer PPD when adding the printer.
Hope this helps.

The print driver for HP Laserjet 3380 that was print only was removed from my iMac, and now when try to download driver, it states to contact manufacturer. I have old driver on Time Machine, can I reinstall that old driver that worked?

The print driver for HP Laserjet 3380 was for print only, was removed and when I went to download from apple, it stated to contact manufacturer. I have old driver in Time Machine, how do I reinstall from Time Machine that driver that worked?

Hi,
Trible post. Please use:
http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/HP-solution-center/m-p/4790405
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Install driver for HP Laserjet PRO CP1525nw in my MacBook with OS X Yosemite

install driver for HP Laserjet PRO CP1525nw in my MacBook with OS X Yosemite V 10.10.1 (I have the disk but it doesn't load the driver)

Hi @Peggysguy ,
I see that you are having issues installing the printer on Yosemite. I will certainly do my best to help you.
The CD won't support Yosemite. You just need the newest drivers to install.
I have provided you with the downloaded Full Software drivers for the Laserjet Pro CP1525nw.
HP LaserJet Professional CP1525 Color Printer Series Full Software Solution.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Cannot extract Window driver for MAC

I have windows installed in my MacBookPro. The problem is I do not have Window driver for Mac. This is the reason why :-
I created a partition of Fat32 (that was my mistake). When I tried to load Windows using BootCamp - it did not work. It is asking me to go to Disk Utility anc conver the partition to Mac file system whcih I am unable to do that. To go round -
I have installed XP in the Fat32 partion without using Boot Camp. The problem is getting the Windows driver for Mac beucase I cannot use the Boot Camp.
Are there any way of getting Windows driver for Mac ?

You need a boot loader and that's what BootCamp establishes.

Windows 7 Driver for Color Laserjet 2605dn is PostScript Only -- Has Specific Issues

This network-connected printer runs fine under XP SP3 with a PCL driver downloaded from HP (5 or 6, I don't remember). New computer has 64-bit Windows 7. Now HP is telling me to use the built-in Windows 7 driver (see http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDispl... but all I can find is PS, no PCL. This driver works OK except on certain types of documents:
Printing a scanned document takes forever, if it prints at all.
Similarly for PDF pages that have background colors or anythign else unusual.
(I could send examples of problem pages it that would help...)
I can print these same documents easily and quickly on my XP computer with the PCL driver, so I'm assuming PS just chokes on these kinds of documents.
Is there an appropriate PCL driver for Windows 7 64-bit (or could I run a suitable 32-bit driver in my situation)?
Failing that, is there any other solution to this problem? (I can't keep a Windows XP computer around forever!) -- jclarkw

>> ... Any recommendation PCL5 vs. PCL6 with this old 2605dn? ...
As far as I can remember, the LJ 2605 printer has a very limited set of printer-resident PCL5 fonts, which means that:
Using bespoke software which directly generates print jobs (without the benefit of a driver) and which assumes that the normal set of LaserJet fonts will be available via standard font selection sequences, may result in unsuitable substitute fonts (from that limited set) being used.
The standard UPD PCL5 driver may also suffer from this problem (I don't know); even if it doesn't (i.e. it is aware of the limited font set), then use of other fonts in the source document will have to be satisfied by the driver either rastering the text (sending a bitmap image) or dynamcially generating and downloading a PCL5-encapsulated (subset) of the source (TrueType) font (which will increase the size of the print job).
As far as I'm aware, the PCL6 (PCL XL) intepreter in the printer includes the normal full set of fonts in the firmware.

Where can I get a Windows 7 64bit driver for my LaserJet CP1215?

According to the product info, my LaserJet CP1215 is supported under Windows 7 64bit:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01539618&lc=en&dlc=en&cc=us&product=3422476#N10...
But the driver package available for download is the same whether I select 32- or 64 bit Windows 7.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3422...
Needless to say, it is not working...although there are no error messages on installation or anything else. See http://h30434.www3.hp.com/t5/Home-Web-Printing/LaserJet-CP1215-wont-print-gets-unspecified-error-on-...
So what do I do, to print to this printer on Windows 7 ??
Help appreciated!

I'm seeing different 32bit and 64bit packages.
ftp://ftp.hp.com/pub/softlib/software10/COL22389/ly-59012-2/ljcP1215-HB-pnp-win32-en.exe
ftp://ftp.hp.com/pub/softlib/software10/COL22391/ly-59118-2/ljcP1215-HB-pnp-win64-en.exe
Suggest you try the latter link.
Found the information here:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&lang=en&os=4063&product=34224...
You're lucky - HP didn't even bother to make a Windows 7 driver for my HP 1010.
Cheers,
Peter

SOLVED USB Printer Driver for HP Laserjet 3500 for Windows 7

Actually this is not a question, it is a solution.
Download the Laserjet 3500 driver for Vista
Run the file, let it unzip to your hard drive
Go to Start\Devices and Printers\Add Printer\Add a Local Printer
Create a New Port\Standard TCPIP Port
Choose a bogus ip, something that does not ping. Uncheck the "Query the Printer"
The computer will try to detect the IP port that does not exist.
At the "Additional Port Information Required" screen, choose next.
The next page will install the printer driver, choose "Have Disk" and browse to the folder that the Vista driver was unziped
Mine was c:\HP CLJ3500, choose the inf file that appears and the computer will install the driver.
Next,, Plug in your USB cord and Viola! The computer will load the printer and driver and create the USB port.
The computer might ask you to use the existing driver, if so, say yes,, of course.
Sammy

My Windows 8.1 Pro 64-bit system has a built-in driver for this printer model:
I don't know whether the driver is present on a fresh Windows install; it may only have appeared in the list after the Windows Update button was clicked on the above Add Printers dialogue, then waiting (perhaps for several minutes) whilst additional drivers were downloaded, and the list repopulated.
I'd assume that the same might be true of earlier Windows versions as well.

Best driver for photosmart p-1100 on windows 7

HiWhta is the best driver to load to allow me to still use my older photosmart p-1100 printer with windows 7 ?

I was having this same issue and found a solution. I was thrilled when I upgraded to 7, until I found out that MANY drivers and applications are just not compatible. BUT....here's the loophole: you can set the program to run in Windows Vista compatibility
mode and it WILL work. To do this: 1) Download the driver utility (CS330.exe in this case) to your desktop. Note: I used the CS330 driver for Windows XP and am running 64 bit Windows 7 on my computer. 2) Right click on the icon and select "Restore Previous
Versions" 3) Select the "Compatibility" tab. 4) Check the box for "Compatibility Mode" and select "Windows Vista (Service pack 2) from the drop-down menu. 5) Click "Apply" and then "Ok" 6) Reboot your computer
and click on the icon to install. Follow instructions given on the screen. Hope this helps!
I tried this, doesn't want to find the driver in the c:/temp/cs330-xp dir

Windows 7 driver for hp laserjet 1100

Similar Messages

Maybe you are looking for