Windows 7 driver for photosmart premium printer

I have installed windows 7 on my hdx 16 and I need drivers for the photosmart premium printer 309c. Anyone have any luck getting the two to work together?
Thanks
Russ
This question was solved.
View Solution.

The latest Vista drivers for this printer on THIS page shows one of the enhancements as supporting Windows 7. So it should install fine. Do notice that this is the v.13 software.
EDIT: Just downloaded the version 13 software, and tried installing it. It seemed to go through fine, though I don't have the printer physically here. Check the screenshot. 
Message Edited by DexterM on 07/10/2009 10:57 AM
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.
Attachments:
Capture.JPG ‏57 KB

Similar Messages

  • Tools for Photosmart Premium printer

    My old photosmart 2410 had tools: (clean, allign, etc.) which I can't find on my Photosmart Premium???.  I refilled ink cartridges and used the tools after reinserting. ....is there a way on my new printer to access "tools"????? 

    What printer model? What operating system?  The toolbox will typically be available from the Solution Center.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Hp solutions centre software download for windows 7(64 bit) for photosmart 3110 printer?

    How & where to get the hp solutions centre software download for windows 7(64 bit) for photosmart 3110 printer? The full hp solutions centre software features such as photo editing, etc that can be utilized for windows 7(64 bit) with photosmart 3110 printer

    Hi Nogot7, you will have to share 3100 over your network.
    On the XP computer .....
    Open Printers and Faxes.
    Right-click the printer you want to share, and then click Sharing.
    On the Sharing tab, click Share this printer and then type a share name for the shared printer.
    On the Win 7 computer ....
    Go to Devices and Printers
    Add a printer
    Add a local printer
    Select Create a new port:
    Select Local Port for the Type of port:
    Enter the network name of the XP computer ie. \\XPcomputername\share name
    Install the 3100 driver when prompted (DO NOT use the CD but the Win 7 built in driver)
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • Need a 32-bit windows home server driver for a cp2025 printer

    I have a Windows Home Server 2011, and multiple Windows XP workstations. I need an XP driver for a CP2025DN printer that I can load onto the WHS 2011, as I want to configure the WHS as a Print Server. The WHS does not recognize (like) the HP Universal drivers, and I do not want to use the Express install download packages. All I need is a driver, like we used to be able to download.
    Anyone have any suggestions/hints?

    those may be helpful...
    http://social.technet.microsoft.com/Forums/en-US/a129f49a-0216-41f0-b190-3efb46fbb8ac/generic-text-only-driver-on-windows-2008-server-r2?forum=winserverprint
    http://blogs.technet.com/b/yongrhee/archive/2009/09/14/how-to-add-64-bit-print-drivers-on-32-bit-windows-server-2003-or-windows-server-2008-print-server.aspx
    Best,
    Howtodo

  • Need HDCP-recognizing Bootcamp Windows driver for MacBook Pro's screen

    I need a Bootcamp Windows driver for my MacBook Pro 15/Retina (MBR) that recognizes that the MBR's built-in screen in HDCP-compliant.  The current Bootcamp drivers for Windows do recognized HDCP on an external HDMI-connected display, but do not recognized HDCP on the internal display.
    BTW, I've read some statements that Windows drivers don't recognize HDCP via DisplayPort connections, so I wonder if Apple is using internal wiring that acts like it's a DisplayPort connection?
    Please do not suggest things that only enable disabling DRM HDCP protection from Blu-Ray discs.  I need a solution that to cooperate with DRM HDCP protection for content from live tuners, not from a Blu-Ray or DVD disc.
    My application is using Windows Media Center (WMC) to play streaming content from my Silicon Dust HD HomeRun Prime (HDHR3) cable TV tuner on my MBR's built-in screen.  This works fine with an external HDMI-connected (HDCP-capable) display, but I also want to get this working on my laptop's screen for when I'm stuck in bed (illness, bad back, etc.).  The only application Silicon Dust offers for viewing HDHR3 tuner output on Windows (or any platform, as far as I know) which supports all protected cable channels is WMC, and WMC relies on the Apple-provided Windows NVIDIA drivers for HDCP capability.  The NVIDIA Control Panel explicitly recognizes my external HDMI-connected monitor's HDCP capability, but does not recognize the MBR's internal screen has having any HDCP.  This causes WMC to prevent the display of any TV channels at all from the HDHR3 when the only screen is the internal one (and it blocks DRM-protected channels if both screens are active in parallel).
    I'm thinking that the best solution would be an NVIDIA driver for the built-in GeForce GT 650M for Windows 8 (or 7) which recognizes HDCP capability via DisplayPort.  Is there anything like that?  Or, alternately, some add-in driver that adds a layer of HDCP capability recognition to the standard drivers?
    Is there any currently-available solution?  . . . something that will enable the internal screen to play all the tuner's cable channels including DRM-protected ones (either on Bootcamp'ed Windows or on the OS X side)?
    P.S. -- FYI, the only other potential app I've read about for using an external tuner with a MacBook is an OS X version of MythTV, but (a) that requires an excessively long list of geek tweek steps (install an SQL application, create an SQL database, do lots of command-line tweaks, add & configure a backend app and then a frontend app, ... ) and (b) even then it seems it doesn't support channels that aren't marked "copy-freely", i.e., HDCP-enabled DRM protected content.

    Strange -- sig's comment seems gone now.  I wonder why.
    Anyway, I did try the latests NVidia drivers yesterday, afterall they explicitly say they added HDCP over DisplayPort, but no joy.  In the NVidia control panel (for Windows), external displays via HDMI have a left-menu section for HDCP that explicitly shows it's working, but there is still no such indication for the internal display, and I am still unable to use WMC with HD HomeRun Prime cablecard tuner to play anything on the screen except channels that the provider marks "copy freely" (e.g., Bloomberg news channel 722 isn't playable, but MSNBC 723 is playable). 
    My guess is that maybe laptop internal displays don't explicitly have internal DisplayPort and HDCP technology but have some kind of exception that normally allows playback?
    As an alternative I wish there were cablecard tuner playback software on the OS X side that could play more than "copy freely" cablecard-tuned material, but there doesn't seem to be anything comparable to Windows Media Player that supports that.  (Now it should be clearer why this discussion belongs under MacBook Pro and not under Bootcamp where the moderators moved it.)

  • HT1338 I can't load driver for HP 6500A printer / scanner

    I can't load driver for HP 6500A printer / scanner

    What does that mean? Have you downloaded the drivers and to installed them? Have you tried adding the printer with the AirPrint Driver?

  • Updated driver for epson R2880 printer

    how can I get updated driver for epson R2880 printer.  Cannot add printer to list of active printers without it.

    Go to > Epson America, Inc. - Support: Mac OS X Mountain Lion Support and follow the Step-by Step Instructions at there web site.

  • HOW DO I GET A DRIVER FOR MY KODAK PRINTER ESP 3.2 FOR IMAC

    I AM SETING UP MY NEW IMAC, HOW DO I GET A DRIVER FOR MY KODAK PRINTER ESP 3.2

    Kodak has posted an unsupported hack that has been reported to enable printing to a Kodak printer not supported in OS X 10.10 ("Yosemite").
    I have not tested the hack myself. As far as I know it will not break the compatibility of printing software that is already compatible with Yosemite. It may degrade the security of the printing system. It's up to you to decide whether that risk is worth taking.

  • How can I download a driver for a Brother printer DCP-J411ODW for Mac OSX 10.9.1?

    How can I download a driver for a Brother printer DCP-J411ODW for Mac OSX 10.9.1? I go to the right place on the Brother website and instead of downloading a driver it says there is a problem. Also something I did download and stuff on the CD provided with the printer is for a PC not a MAc. Help please.

    OK, connecting a Wi-Fi printer is a 2 step process.
    Connect printer to your network
    Have computer to "see" printer on the network.
    Follow Apple's steps for connecting a Wi-Fi printer in Printing in OS X. Read the article in it's entirety before installing.

  • Cannot extract Window driver for MAC

    I have windows installed in my MacBookPro. The problem is I do not have Window driver for Mac. This is the reason why :-
    I created a partition of Fat32 (that was my mistake). When I tried to load Windows using BootCamp - it did not work. It is asking me to go to Disk Utility anc conver the partition to Mac file system whcih I am unable to do that. To go round -
    I have installed XP in the Fat32 partion without using Boot Camp. The problem is getting the Windows driver for Mac beucase I cannot use the Boot Camp.
    Are there any way of getting Windows driver for Mac ?

    You need a boot loader and that's what BootCamp establishes.

  • Windows 7 Driver for Photosmart C7280

    I am looking for a printer driver for the Photosmart C7280 that will work with Windows 7 Beta.

    I too used the Windows 7 compatibility feature to install the following updated drivers on Windows 7 (64-bit):
    100_228_PS_AIO_02_Full_Net_enu.exe, (1/1 , 198.44M)
    However, I was unable to install any of the updates using the same method. Several of them are listed as critical:
    PS_AIO_02_110_008.exe, (1/1 , 15.97M) PS_AIO_02_110_008.exe, (1/1 , 15.97M)
    slp_dd_hathi_110_017.exe, (1/1 , 25.29M)
    ConvergedIO_HPCOM_V3.exe, (1/1 , 1.53M)
    PSE_HpqSRmon.exe, (1/1 , 415.55k)
    I am having other errors that are so far unresolvable, so I would really like to be able to install these updates to see if they improve the situation. Also, apologize if those links to the updates did not work - it appears that when I paste the URL into this forum's link window, it does something to break it. The updates can of course be found in the main download page for the C7280, Windows Vista 64 bit.

  • Best driver for photosmart p-1100 on windows 7

    HiWhta is the best driver to load to allow me to still use my older photosmart p-1100 printer with windows 7 ?

    I was having this same issue and found a solution. I was thrilled when I upgraded to 7, until I found out that MANY drivers and applications are just not compatible. BUT....here's the loophole: you can set the program to run in Windows Vista compatibility
    mode and it WILL work. To do this: 1) Download the driver utility (CS330.exe in this case) to your desktop. Note: I used the CS330 driver for Windows XP and am running 64 bit Windows 7 on my computer. 2) Right click on the icon and select "Restore Previous
    Versions" 3) Select the "Compatibility" tab. 4) Check the box for "Compatibility Mode" and select "Windows Vista (Service pack 2) from the drop-down menu. 5) Click "Apply" and then "Ok" 6) Reboot your computer
    and click on the icon to install. Follow instructions given on the screen. Hope this helps!
    I tried this, doesn't want to find the driver in the c:/temp/cs330-xp dir

  • How to install Windows 7 64 bit driver for Canon i9100 Printer?

    When I try to install my Canon i9100 printer on my HP laptop running Windows 7 Professional 64 bit, Windows cannot locate a driver.  Visiting the Canon website, I find an update module for the Windows driver.  Canon says the printer MUST be installed using Windows Updater before their driver update can be installed.  I have tried everything, but I cannot get Windows to find a driver.  Windows Updater says that my computer is Up To Date.
    What am I doing wrong?
    Thank you,
    David

    Hi Honeycutt,
    The Windows 7 driver for your i9100 is only available from Microsoft through Windows Update.  Please try Microsoft's web page for assistance with troubleshooting this:
    http://windows.microsoft.com/en-us/windows7/find-and-install-printer-drivers
    If you continue to have difficulties, please contact our support group using the following link:
    http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Windows 7 driver for 3500 color printer

    I need a windows 7 driver for my 3500 color laserjet printer.  Windows XP is the latest driver listed on the website.

    The latest Vista drivers for this printer on THIS page shows one of the enhancements as supporting Windows 7. So it should install fine. Do notice that this is the v.13 software.
    EDIT: Just downloaded the version 13 software, and tried installing it. It seemed to go through fine, though I don't have the printer physically here. Check the screenshot. 
    Message Edited by DexterM on 07/10/2009 10:57 AM
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"
    I am an ex-HP Employee.
    Attachments:
    Capture.JPG ‏57 KB

  • Print Driver for Photosmart 7550

    My can i not get an updated driver for my Photosmart 7550 i have a MAC. I have had this priner for years and love the quality of the photos that is prints. my can HP not make just a photo printer anymore???? i have since bought the HP photosmart 7520 and the print quality is crap.  please help

    Welcome to the HP Community @ericabomberger 
    I read through your post about the concerns you're having with your Photosmart 7550 and 7520, and I am here to address them for you.
    There areno available drivers for the PS 7550 on Yosemite, as the printer model is older, and Yosemite is quite new.
    Your best bet would be to troubleshoot the Print Quality Issues on your PS 7520, as this model is compatible with 10.10. I would suggest trying all of the steps from this guide to help improve the Print Quality problems:
    Fixing Print Quality Problems for the HP Photosmart 7520 e-All-in-One Printer Series 
    If you find that the troubleshooting does not help the PQ, call HP directly to see what your printer options are. You may need a replacement part or printer and technical support can help you in that category.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Maybe you are looking for