Windows 7 driver hp all-in-one 18-1201ix

i need windows driver for Hp all-in-one 18-1201ix

As previously stated "HP does not provide Windows 7 drivers for the HP 18-1201ix All-in-One Desktop PC."
****Disclaimer*****
HP doesn't recommend the installation of Windows 7 on a computer shipped with Windows 8, nor will it support the installation of Windows 7. HP will not provide Windows 7 drivers and suitable drivers may not be available for the hardware in the computer. Also, Windows 7 may not support some of the hardware or software features designed for the computer.
Make sure you create your HP Recovery Discs or USB Flash Recovery media before modifying or changing ANYTHING.
You will need to DISABLE "Secure Boot" and maybe ENABLE "Legacy Support" in the "BIOS Secure Boot cofiguration" on the settings page shown below, before you can attempt to install Windows 7;
or
Additionally, as the hard drive may be partitioned as GPT, you may have to boot the computer using the "UEFI - CD/DVD drive" or "UEFI - USB Flash drive" options in the "F9" boot menu. If "UEFI - CD/DVD drive", "UEFI - USB Flash drive" or something to that effect doesn't exist in the boot menu, please post a screen shot and/or descibe the listed boot options.
I suggest using Windows 7 SP1 for the best intallation experience. If you need Windows SP1, please see "How to Install Windows 7 Without the Disc" to download and create your own Windows 7 SP1 disc. If the DVD refuses to boot as UEFI, you may need to use a USB Flash drive (may require DISABLING "Fast Boot" in the BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid UEFI enabled USB Flash drive if it is formated as NTFS and may require a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installer, or WiNToBootic. I like Rufus, as it has options for "GPT partition scheme for UEFI computer" and "FAT32".
Most of Windows 7 drivers from the Compaq Presario All-in-One CQ1-4118LA Desktop PC Drivers page should work on your HP 18-1201ix All-in-One Desktop Computer. Both models use a variation of the Arroyo motherboard. If you still have missing or unknown devices after installing the drivers, please post the Windows Device Manager's "Hardware Ids" for those devices as shown in the example below;
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Similar Messages

Problem down loading driver for All-in-one Printer

I tried to down load driver for HP Photosmart C4183 All-in-One on my laptop with OS Windows 7 Premium. During the process of installing each time it request me connecting the USB cable it gives a message that the driver am trying to install is faulty,I also tried it with my Toshiba note-book the same message appears. This is the first time am using this particular product. There some information on my computers Ineed to print ,I am only able to use the copier. Is there a way to repare the USB cable online,if it's the problem

i have a hpo deskjet printer f2180 but lost my disc how do i connect too my lap top

User Defined Paper Size, Windows 7, PSC 2110 all in one printer

I am trying to print a 5x7 photo using the user defined paper size of my PSC 2110 All-in-One printer. When I used X
P os, it was easy to do. Since upgrading to Windows 7, I have been using the default drivers that load with that, but it doesn't have the ability to define paper size. Is there a driver available that would let me do this? I've tried to use compatability mode to get the original drivers from the installation disc to work, but it won't do it.

Hi,
The last update was for Vista, 5 years ago:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4220...
At this stage, Windows 7 only supplies a very basic and generic print driver for this printer just for print. You may want to keep that way or buy a new printer.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Solution centre not working for windows 7 and wireless all in one, altho can print ok

I have installed an officejet 6500 wireless all in one on my HP Elitebook running Windows 7 64 bit.
Although the printer installed - albeit with an error for Microsoft.net4 that was resolved after a re reboot - HP Solution Centre v14 wont start. Indicated device installation wasnt complete, plugged in USB and tried to uninstall/re-install all same thing.
Ran Network, scan and print utilities and have MacAfee and firewalls all dis-abled during install. After the error pop up it just closes.
The printer works fine and I can scan through the webscan option but what's happened to solution centre?

Great information.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Windows 7 and HP All in One Printers

Have you just brought a new PC with Windows 7 or upgraded from Windows Vista and now having problems with your Printer / All in One.
1) Are you running the latest version of HP Software designed for Windows 7?
Please go to Hp.com and choose Support and Drivers
then type in your printer model number and follow the directions on the page.
2) Do you print but nothing comes out the printer, and the job just disappears from the spooler?
The fix is available here
Usb Connected Printer
This fix is about USB Connection but the method can also be used for a Network Connection too
3) Can you scan but your Scanned files just disappear, not in the directory you thought they should be.
The fix is available here
Cannot find scanned image or document files after scanning completes.
4) Does HP Solution Center say that your printer is no longer installed?
The fix is only applicable for people who have upgraded from Vista to Windows 7
HP Print Software Patch When Upgrading Vista to Windows 7
This patch will fix known problems with the following features and functionality:
HP Print Status
Toolbox
Ink Levels
Solution Center
HP Scan (All-in-One)
Front panel scan button (All-in-One)
5) Did your network printer disappear for no reason maybe after you ran a windows update ?
You may have found a thread that talks about this problem, this thread says disabling HP Device Discovery fixes the problem. I do not recommend this as it may cause other problem later.
I would recommend readding the missing printer using Add Device from the Start, HP (Printer Device Name) Menu Item.
If this problem presists please come back to the forum and inform us so we can look at this problem in more detail.
6) Are you just having general problems with install, printing, scanning or using your printer / all in one on a network (wired or wireless)?
You may have a problem that one of our Diagnostic tools can fix please see the Diagnostics Tread for detailed information about these tools.
HP Print and Scan Doctor
7) Are you having a problem that we have not covered?
First try the forum search to see if anyone else is having a similar problem.
If you have no luck start a new topic and wait to see if anyone else knows the answer.
JonW
I work for HP

Great information.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Re-installing Windows XP on MSi All-In-One PC's

Hi,
I have just taken over support of two MSi All-In-One PC's because the previous support person was fired for stealing money. As such I don't have the Administrator Passwords for either of the machines and they both appear to have viruses. They are both running Windows XP Home Edition, SP3. I need to re-install Windows on both machines so that I have Administrator access and can install Anti-virus software etc. I need to know the following please:
1. Do these machines come with an OEM version of Windows XP? I can't find any disks so maybe they don't?
2. Can I download a copy of the MSi OEM version of Windows XP from somewhere?
Basically I need to re-install Windows on the two machines but I am unsure how to go about it. Any help would be appreciated thank you...
Thanks and Regards,
Phil

You need discs to reinstall OS. You can't download OS, unless you go the illegal way. If these came with Windows preinstalled, there should be factory reaset possibility when booting (when you see "Hit Delete to access BIOS" look for something based on resetting factory settings). Magic word:IF.
If not, you need CD and key of course.

Anyone know of Scanner Plug-in for PSE 8 on Windows 7 for HP All-in-One

I'm asking on behalf of a friend, but here's the deal. She has Photoshop Elements 8 installed on a Windows 7 machine.She would like to find a plugin that will allow her to scan in photos from her Hewlett Packard All-in-One scanner directly from Photoshop Elements 8. I have searched the internet, Adobe's site and HP's site and have found plenty of hints that such a plug-in exists, but no sign of an actual, downloadable file.
Any assistance is deeply appreciated.

I believe that the plug in which you reference relates to PSEv.9.
http://kb2.adobe.com/cps/849/cpsid_84933.html
There have been reported problems scanning directly from PSEv.8 & WIN 7, esp. with HP machines. Check the HP site to see if there are updated drivers for the equipment.
If not, suggest utilizing the software that was installed with the scanner, then importing the file for enhancement in PSE.

Windows 7 and Hp all-in-one printer v40

I have an Hp all-in-one printer v40. I cannot access solution center or toolbox for estimated ink levels with my new Windows 7. I have tried your on-linbe suggestions and cannot get any to work. I don't seem to have the options available to click on that are suggested.
Thanks for any help.

Great information.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

HPSolution software available for download for windows 8 and d110A all in one?

I got a new computer runnning windows 8.1. I tried to use the installation disk that came with the printer, but it is not made for windows 8. I tried downloading software from the website, but it only had eprint and that did not work right. I removed it. I really want the hp solutions- I could do so much from my computer with it.

Hi KarH and welcome to the HP Forum,
I understand that you are having an issue installing the software for Windows 8.1. I will try my best to help you resolve this. Here is the a download for the HP Photosmart Full Feature Software and Drivers. I suggest that you download and save it to your computer and then run it. Since you've had a previous version on I recommend using the HP Officejet Pro Software and Driver Removal Utility to make sure that everything was removed before installing again.
I hope this helps, let me know how it goes.
Thank you,
I worked on behalf of HP.

Driver for all-in-one-printer L7590 for Sony Xperia Z2 Tablet

I cannot find any driver-app. Anybody who know how to solle the Problem?

Hi Liffe6,
Welcome to the HP Support Forums. I understand that you would like to learn how to print from your Sony Xperia Z2 tablet to your Officejet L7590 printer.
I check the specifications for your tablet and it ships with Android 4.4 (KitKat) as the tablet’s operating system so I have included the Android 4.4 (KitKat) and Later: Printing with the Android Print Solution document. It will walk you through how to print using the solution that is already installed on the tablet.
Another option is to download and install the HP ePrint Mobile app. I have included the HP ePrint Mobile App FAQ document for reference.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Need driver for All-in-One F4480 for Mac OS 10.9

Hi,
My scanner on the F4480 was giving me an error that my software may not be compatible with my OS (Mac OS 10.9) and that I should uninstall. Before doing so I checked the HP site for driver updates, which directed me to check the Apple Software updates. There was no update available via Apple Software, so I uninstalled the driver. However, now I cannot find a way to re-install the driver since there is no link to download the driver on the HP site -- only instructions to go thru the Apple Software Update.
Now I cannot print or scan.
I've gone thru Apple System Prefs > Printers and Scanners but the printer is not showing up in my list or giving me an option to add it.
Please help. The HP site seems useless because it does not provide a download link, only instruction that Apple Software update will "know" to update the HP software. There's no hint on what to do if you've uninstalled the software.
thank you!

Hi katiekawa,
Welcome to the HP Forums.
I have done some research and I have found that a Full Feature Software and Driver package is NOT available for the Mac 10.9 operating system.
Please click on the following link for OS X v10.9 Mavericks: Installing and Using the Printer on a Mac.
Thank you for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Windows 7 64bit Photosmart All-in-one C6380 Solution Center Issue

Finally stumbled on re-installing printer SW so I was able to bring up the Solution Center page after a week of effort. The problem is it errors out after clicking on the scan buttons for either pictures or documents with the following dialog box pop-up message: "HP Imaging Device Not found", followed by a bunch of instructions for recovery, that don't work.
What I need is an older version's Imaging Device and Features files, and I don't have them on my original disk that came with the printer! And I don't know where to go get them. I've gone through the Shutdown, reboot, uninstall/reinstall device, etc. instructions and nothing helps todate. Does anyone have any thoughts on what I should do next? Installing the FULL version of the printer SW doesn't cut it!

Hi GNC,
Welcome to the HP Forums! I understand that you are getting the HP Imaging Device Not Found error. I am happy to help you with this issue! Please take a look through this guide. 'The HP imaging device was not found on the network' Message Displays on the Computer (Windows).
Hope this helps, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

My 5250 all in one won't email with Windows 7

Since I installed windows 7 my 5250 all in one won't e-mail anything since I don't have WINDOWS MAIL ANYMORE, and it only gives you windows mail as the only option to email.
Anyone know how to correct this?

In the Start Menu, type 'Live Essentials', and open the option which says to go online to get Windows Live Essentials. This way, you can install Windows Mail.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Usb for 1510 all-in-one printer causing problems with it accepting print jobs

I am having trouble downloading the driver for a 1512 all-in-one printer. It was working for about a week and it is not working now. I loaded the suggested driver 1510 all-in-one driver but when I get to plugging in the usb from my Windows 7 laptop to the printer, it does not feel it is connected. I can print items that I scan but am puzzled how it will not print. The only thing I have deduced is I need a new usb cable. I bought on ebay as I've always had good luck with hp products.
Sparky325

I decided that in spite of the fact that it had previously printed, I got another USB cord and used that and then the printer worked. The one I received with the printer must have been too loose to make a connection. This one feels snug when i need to print from my laptop. Thanks for your help. Sparky 325

Can bootcamp use a pre-existing windows 2nd drive?

On Leopard using 2008 mac pro with leopard on a single hard drive, can I place a 2nd hard drive with a pre existing windows vista partition (from a windows computer) on it and get it to be accessible in bootcamp? If so can it be NTFS or does it have to be Fat32.
Also, regardless of the above, can the bootcamp windows installation drive have more tha one partition that windows uses? for instance I would have 1 drive for Leopard with a single partition; one drive for windows with multiple partitions (one for windows as c:; one for windows programs, and one for windows games all accesible to the windows booting environment)
And lastly, can fusion be made to work with this new "bootcamp" window installation once it is already functional in bootcamp?
Thanks.

You will have to reformat the drive as follows:
Extended Hard Drive Preparation
1. Boot from your OS X Installer Disk. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Windows 7 driver hp all-in-one 18-1201ix

Similar Messages

Maybe you are looking for