Windows 7 driver support for T60(p)

Hello all
Im a happy owner of a Thinkpad T60P, 2007-8LG model. However, im getting much tired of Windows XP and want to use the upcoming Windows 7 OS, but im a bit unsure if there will be any driver updates for the T60 models.
I've seen the Windows 7 beta drivers page from Lenovo, but this only includes drivers from T61 and up. Can anyone confirm that there will be drivers released for T60(p) models as well (or in case the product line is ditched).
Thanks in advance
Solved!
Go to Solution.

Nocture,
I have a T60p (8744-J2U) with Windows 7 (Build 7229) runing very very happily. I have 4 GB installed. All the key drivers you need have been released and should work fine on your system.
If you want a super clean install, refer to my post on Device Driver Installation Order thread.
Also, if you want a really stable laptop, DO NOT UPGRADE. Backup your system and data, VERIFY IT and then delete the partitions during install and let Windows 7 partition and format the drive.
Pierre

Similar Messages

MOVED: Windows 7 driver support for the Mega 865 Pro

This topic has been moved to Windows 7.
https://forum-en.msi.com/index.php?topic=128122.0

Nocture,
I have a T60p (8744-J2U) with Windows 7 (Build 7229) runing very very happily. I have 4 GB installed. All the key drivers you need have been released and should work fine on your system.
If you want a super clean install, refer to my post on Device Driver Installation Order thread.
Also, if you want a really stable laptop, DO NOT UPGRADE. Backup your system and data, VERIFY IT and then delete the partitions during install and let Windows 7 partition and format the drive.
Pierre

Printer Driver Support for Computers Running Windows 8 Release Preview

Printer driver support for computers running Windows 8 Release Preview
HP is working to help customers have the best experience with HP printers connected to PCs running the final release of Windows 8. The pre-release time is a development period when HP develops and tests printer driver solutions. HP’s current plan is for Windows 8 compatible printers to be available when the new operating system is released to the public. HP is working with Microsoft to include drivers in the Windows 8 operating system for HP printers introduced in recent years.
There may be a variety of sources for a printer driver/solution for your HP printer on a computer running Windows 8 Release Preview.
inOS:
An in-Operating System (inOS) driver is a basic driver that is included within the operating system. You do not need to download or install any software from HP. Windows 8 Relase Preview contains several inOS drivers. If an inOS driver is available for your printer, you will have at least basic print capability with USB and Network and basic scan capability with USB only (if your printer supports scanning).
Windows Update:
There might be a more functional or more up-to-date driver available for your printer through Microsoft Windows Update. If Windows Update is enabled, then the Windows Update process activates automatically when you connect (USB and Network connections) the printer to the computer. It searches online for the most recent print driver on the Windows Update site. If the online driver is more functional than the currently installed driver in Windows 8, the computer downloads and installs this driver.
HP Supplied Printer Driver/Solutions:
Although HP does not formally support any pre-release versions of Windows Operating Systems, including Windows 8 Release Preview, we may supply some full functionality drivers* prior to the official release of Windows 8. These drivers may be supplied as a courtesy to our valued HP customers through this Support Forum, though no formal support will be available otherwise. We welcome feedback within these support forums. Please check back for further updates as the official release of Windows 8 approaches.
* Full feature drivers provide full product functionality, plus valuable software to help you get the most out of your printer.

Hi vireshr,
Check out the following thread.
http://h30434.www3.hp.com/t5/Windows-8-Release-Preview/How-to-Get-Your-Inkjet-Printer-Working-with-W...
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Windows 7 64bit driver support for GX623

Hi, i have GX623 laptop (CPU:Intel Core 2 Duo P8400; RAM: 4GB ), i am interested why there is no Windows 7 64bit driver support for this model ? I really would like to run some 64bit software on it.
If my laptop hardware support it why MSI don't release drivers so my software can also support it. In some 32bit drivers there are some 64bit drivers but still not all for complete functionality.
On some older posts from 2009 I see responses that windows 7 64bit is very new so that's the reason for no driver support but in 2011 surely that is not the case.
Can we expect 64bit drivers for Windows 7 in near future or support for 64bit software isn't planed for this model?

So is it officially GX623 supported for Windows 64bit install because I still don't see any drivers for Windows 7 64bit or maybe Windows 7 64bit don't need any drivers?
Hello anybody here? Anybody working here?

There must be a real solution to "Windows found driver software for your device but encountered an error installing"

"Windows found driver software for your device but encountered an error installing"
I've spent hours researching this error - Seems like many people have the same issue although there is no difinitive fix or known cause.
I'm hoping someone here has an answer.
Windows 7 Home Premium x64 OEM (HP)
This is not an upgraded Vista system.
It's not a specific driver related issue as it's the same response/effect be it graphics/chip set/usb/printer drivers.
Please dont suggest to flatten and re-install or run a repair install - It's not an option, I only have remote access to the unit
as it's currently in field use.
This is a machine specific issue - identical machine purchased at the same time and configured the same has no issue.
So the story.
User has been fine for weeks - no hardware of software changes except Windows Updates.
A Camera/USB connection that was working no longer does.
Tried in all USB ports
Plug in - windows announces found new hardware, tries to install drivers then fails
with "Windows found software for your device but encountered an error installing ...."
Device manager finds and identifies device although it is in the 'Unknown Device" category.
Manually updating drivers via search/internet or point directly at a driver has exactly the same effect.
Thinking this was just the camera drivers - I researched and downloaded new drivers from camera manufacturers sites
Fuji and Canon.
Same effect.
Deleted/uninstalled drivers completely, deleted/uninstalled all USB root hub and USB devices (hidden and visible)
SFC /Scannow finds no error
Cold boot finds USB and chipset(?) devices on boot attempts to reinstall then we get
"Windows found driver software for your device but encountered an error installing"
So now I have no usb devices at all - memory stick/card reader/printer...... nada.
in fact if I try to update any device driver I get the same message generated.
Restore point does not help either.
After much trawling I found reference to a permisions issue and stale driver cache data.
(This is using an administrator account - not user with admin permissions?)
I'm willing to try anything at this time
I deleted the infcache.1 and other .dat files under c:\windows\system32\driverstore
Copied the usb .inf and .pnf from the appropriate FileRepository directory into c:\windows\inf
Uninstalled all the usb/unkown devices from device manager again.
Rebooted
Takes a little longer to boot as I take it it's rebuilding the driver cache then
a very short hurrah!!!
I can now use usb memory card and pen drives - no issue
Plug in a camera or printer...
"Windows found driver software for your device but encountered an error installing"
Several attempt at this trying different driver versions.
It should not be vendor specific, the other field machine that works is using Microsoft drivers for these devices.
I even copied the drivers from one machine to the other - repeated everything above...
"Windows found driver software for your device but encountered an error installing"
And then the nail in my sanity
Try windows update....
Reboot
"Windows found driver software for your device but encountered an error installing"
but this time its different.
The device it thinks it cannot install is the generic MTP-PTP drivers (Photo Transfer Protocol -so am I getting somewhere)
so it still finds but cannot install.
The cameras are always found but appear as 'unknown devices' and cannot be accessed
Uninstall all USB/unkown again - reboot..
Same message and this time I've lost all the USB again.
Restore point to before Win Update gets me USB back again although I still have no cameras - so theres an update issue as well.
This has to be tied down to a file access/ registry problem although I'm loath to go cutting about without some guidance.
I'm no great believer in 'registry cleaners' unless anyone can point to a definitive/no ad's/sales version that really works.
As I said above, flattening/rebuild at this time is not an option - the user is not best pleased and I'm completley stumped.
If anyone has experienced(manu of you have) and fixed(still to find one) this issue please let me know how as soon as possible.
Chris

I know I am replying to an old thread - but I have the answer and resolved this error, and since this message comes up first in search results, and part of my answer came from this thread, I wanted to help someone else as this took an extra
12 hours and a lot of technical insight to resolve. See below for detailed explanation that others ask for above.
My original issue was that iTunes didnt reinstall. generating this error that said I am trying to access an unavailable network resource and to browse to find itunes64setup (again). This may partly have been due to me deleting old install version folders.
Research led me to completely uninstall apple products and reinstall per their instruction and fixed the issue with iTunes. see
Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
The SAME error I had while updating itunes recurred while uninstalling it from my Windows 7 SP1 system...so I went to microsoft Fixit and attempted to correct and it properly uninstalled iTunes for me, which allowed the reinstall.
What didnt work was my USB web root/ root hub, which partly involved my older system and USB 1.0, and the delete/reinstall existing drivers with the c:\windows\winsxs folder as source of drivers (thank you Magon Liu!!!) which I had to figure out what/why
and how.
Then I had an intel chipset issue...my new Iphone wasn't recognizing in plug and play, and there was an error with installing the device drivers for my new iphone 6. Manual applications didn't work, even though a generic device showed in control panel -
device manager with a yellow !
Per above blog answer - I tried to remove and reinstall my USB controller or update the drivers (I have an Alienware M15 laptop - a few years old.) I discovered that the USB host controller - an Intel(R) 5 Series / 3400 Series Chipset family USB Enhanced
Host controller - (port) was not covered by current Intel chipset programs which are Series 6 and later, but did have an update (8/20/2009 v9.1.1.1020) that supported USB 2.0 (and therefore 3.0 backwards compatibility which as an issue with my new iPhone
and some USB thumb drives.) To find this I had to look at the Support - Downloads and Drivers - browse for drivers and somewhere found an option to look for older no longer supported drivers. I found infinst_autol.exe for my case.
Once downloaded I tried to install and failed. Found the log in C:\Intel\Logs and contains:
[InstallDev]
          [Device]
            Driver = C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf
            INF = C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf
            Installed INF =
            Previous driver package =
!           Warning 0xE0000235: DriverPackageGetPath failed.
            Difx = 64 bit
Execute command: C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\x64\Difx64.exe -DriverInf "C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf" -Flags 20 -KeyPath "Software\Intel\Difx64"
            Using RegDeleteKeyEx
!!!         ERROR 0xE0000246: DriverPackageInstall generated an unexpected error
HERE'S THE ADDED EXPLANATION TO BRIAN'S POST THAT EXPLAINS THE SECURITY ISSUE:
This turned out to be an error for two reasons. First, after manually running the command in an "run as administrator" window (same error result), thinking it related to my anti-virus (turned that off/disabled firewall and A/V), and from this thread
granting my user administrative rights to files in an install folder and trying to reinstall inf files and drivers from C:\Windows\winsxs vs my copied infinst_autol.exe expansion (as found from log in C:\Users\David Samuels\AppData\Local\Temp\IPMx7\WIN7 folder).....that
there was an easier solution as the reason this error actually happens is a permissions problem.
To access the proper windows system folders - you have to be the TrustedInstaller service - not just in the administrator group...or you have to be the actual "Administrator" account. To become actual administrator on
your own laptop, Open a command window "run CMD.exe as administrator", then execute command
> net user administrator /active:yes
This creates a local PC Administrator account with no password. Coincidentally it has proper permissions to windows directories for installing drivers. Log in as this user, go to device manager and update the USB hub and any other drivers. if updating the
USB root - it doesn't replace it right away as the system cant disable the currently resident in memory "running" driver - you have to update, then restart the system, log in as administrator and repeat at the next lower layer that has issues.
Once completed - log in as yourself again and disable the administrator account in a command window with > net user administrator /active:no
This in my case enabled all my USB 2.0 and 3.0 devices on my originally only USB 1.0 laptop and everything else works properly again - I hope this helps many of you to resolve your own issues that were difficult to find and resolve and that got as far as
this thread. Good luck!
Regards,
Dave Samuels

LabVIEW RT driver support for CEI-620?

Hi All,
I am using PXI-8106 to run heavy-duty communication and one chasis holds the CEI-620 card (third party ARINC429 card from GE, formerly Condor Engineering). Currently on the PXI controller only runs LabVIEW RT (Pharlap) since I did not want to install Windows OS to slow the performance. Now here it is the problem, GE does not provide LabVIEW RT driver support for CEI-620 (they do have LabVIEW RT support for CEI-830 though, but that card is PMC interface). Basically right now MAX can not recognize the CEI-620 card on the host side, and I can not deploy my ARINC429 application VI to the target PXI controller. I am wondering anybody here has encountered the same problem and develop the LabVIEW RT driver for CEI-620 on his own?
Thanks.
Martin Ding
Senior Project Engineer
S-TEC Corporation

Hi,
Unfortunately I don't have much more information to offer. I would suggest checking to make sure you have all the correct device information whe you create the ini file. I think you should still be able to develop a driver for a poll based device. It should be easier to generate an ini file if you do not require interrupt information. Make sure you have the correct identification information and try using the VISA Driver Development Wizard again.
Eric A.
National Instruments
Distributed I/O Product Support Engineer

MSI Big Bang X79-XPower II Windows 10 Driver Support Request!

We are in need of MSI Big Bang X79-XPower II Windows 10 driver support. Do not attempt to install Windows 8.1 drivers from the MSI global website on your Windows 10 setup or it will screw up your entire operation system and you will have to reformat yo...

The OCZ shows up on the main BIOS screen at 1066Mhz
Unplugged the power
shorted the JBAT pin for 5 minutes
Put the G.SKILL memory into slot 2
re-plugged the power
powered on
MB lights up, fans spin,
NO POST
wait ~2 minutes
MB shuts down and then rest...

This is the messsage i get when trying to install nano 7th Generation........windows found driver software for your device but encountered as error whille attempting to install it .......what do i do plzs help.

This is the messsage i get when trying to install nano 7th Generation........windows found driver software for your device but encountered as error whille attempting to install it .......what do i do help plzs.

How to restart the Apple Mobile Device Service (AMDS) on Windows

I have using I phone 5c after connected with my HP elite book 6930p laptop, Automatic software driver is not deducting, and display Windows found driver software for your device (MTP USD Device) but encountered an error while attempting to install it.

I am using I phone 5c after connected with my HP elite book 6930p laptop, (Installed Window 7 32 bit). automatic software driver is not deducting, and display Windows found driver software for your device (MTP USD Device) but encountered an error while attempting to install it.
I did install itunes and update also. but the above problem still same.
Kindly give me solution of it. awaiting.
Regards
Abbas Kader

try it with another computer to check if it shows up
if so
uninstall all apple software
reboot
use regedit to search and remove all itunes keys
reboot
resinstall apple software
if non of that helps then try another cable
if that don't help could be your phones connector is damaged

Are there any sound cards with best driver support for Arch?

I was wondering if there are any sound cards that have the best driver support for ArchLinux? I currently own a Creative Labs X-FI Platinum Edition. The main reason I like the Platinum is that has an interface you can plug MIDI and Audio ports into. It seems to me, however, that Creative is the worst company to support Linux drivers. If anyone has any opinions, please feel free to comment. According to all my research, ALSA sound drivers are the most supportive for sound. Am I also correct in this assumption?

yeah, creative sucks. go with m-audio. they support linux unlike creative.

JDBC Thin Driver Support for Data Encryption and Integrity

Hello JDev Team,
I am trying to implement JDBC Thin Driver Support for Data Encryption and Integrity.
It works fine with java.sql.Connection and java.util.Properties like in the following code:
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
Properties props = new Properties();
int level = AnoServices.REQUIRED;
props.put("oracle.net.encryption_client", Service.getLevelString(level));
props.put("oracle.net.encryption_types_client", "( RC4_40 )");
props.put("oracle.net.crypto_checksum_client",Service.getLevelString(level));
props.put("oracle.net.crypto_checksum_types_client", "( MD5 )");
Connection conn = DriverManager.getConnection ("jdbc:oracle:thin:@localhost:1521:main", props);
etc...
But I am developing an application with InfoSwing components and it has a different way to connect to Oracle database using oracle.dacf.dataset.connections.Connection, like this:
sessionInfo1.setAppModuleInfo(new ModuleInfo("bc", "BcModule"));
sessionInfo1.setConnectionInfo(new LocalConnection("JDBCThin"));
sessionInfo1.publishSession();
My question is:
Is there any way to implement DataEncryption and Integrity into this type of connection?
Thanks a lot in advance.
Victor Bykov
null

Victor,
No, you can't do this from DAC, but I've been discussing it with the developer, and we both think this capability would be useful to have, so I've logged it as an enhancement request.
I do have a question for you. Once you've made the JDBC connection, do you need access to the Connection object afterwards? We're thinking of how the change could be implemented, and one way would be to allow you to pass in a Properties object when creating your own NamedConnection.
Thanks
Blaise

Windows and OSX support for Proximity

Is there an install for Windows and OSX support for Proximity.
I have upgraded all of my endpoints to TC7.1.2. (SX, C Series, EX) and Proximity is working great however most of my users bring laptops to meetings not iOS devices.
Any timeframe ?

@dshumake; nice try ;) (thanks for being forgiving with us)
@ablaisdell; agree!
@fcosgrove; we are currently starting a limited trial for Win and Mac clients (EFT, part of TC 7.3). The main feature for the laptop client is sharing FROM your laptop to the video endpoint, so you can skip the cable, dongles etc in the room.
We do have plans for supporting call control and content receive to the laptop as well, but that's later.
The first PC & Mac version has target for first half 2015, but is subject to change (as in: not yet committed).
Br,
Henrik

S205 :Sad with Lenovo Driver support for Win 8

Sorry for my bad english, but I need to tell you my frustrating experience.
Due to low cost new windows 8 OS 64bit, I buy a lincense for mine Lenovo S205, conforted with some new Driver updated for 8 on Lenovo site.
I saw something strange in the Driver's page for ex. the wireless driver is called Cybertan\LiteOn and we have a Ralink RT 3090 wifi module.(or in some market Atheros AR9285)... Hummm realy strange.
I cross my fingers, I pray god and I start downloadin ALL the driver and start upgrading my system.
At restart I have my new Win8 64bit system and thank of god the most important driver (Ralink wifi) was autodetected and recognized by Win8 whitout install the strange Cybertan\LiteOn from Lenovo that doubt was working in a ralink device.
But at this point strarts the big issues with the unrecognized devices, that tahnks of god were less than expected but drivers fron Lenovo site were all wrong !!!!! Yes wrong, it seems a joke but was the true,
I think,(to tell the true I'm sure) no one from Lenovo tech checked the drivers in a S205 models, and I can explain why with the above sad experience:
- SOUND: windows only install generic HD drivers and the sound quality as expected was crappy. So I try the lenovo driver Conexant but it does not properly work, SmatAudio icon in the ControlPannel was not present, no conexant pannel to manage sound, and nothing changed, windows continue with is own generym Microsoft HD drivers. I remeber that Lenovo model U300S and U300E have the same soundcard I dowload their Conexant Win8 driver (with a different number so I hope it was teh latest) and my idea was great, the Conexant U300 driver works on my S205 lenovo and Win8 detect the conexant soundcard and SmartAudio is present and working. There is only a isse concerning SRS Sound that is present on my system but if I try to lounch nothing appens, so I think is not correctly working. But so far so god sound is better than before with generic MS drivers, but to do so I have to choose a different driver from a different Lenovo pc, not an easy step for a normal user.
- OSD: on screen display (FN+F keys) in 7 they was insert in the Lenovo Energy Mnagement, so to works you need to instal it. I make the same in win 8 with the new Lenovo Energy Management provides by Lenovo site, Lenovo Energy Management is working but OSD no !!!!
Windows 8 detect and show you in autonomy soud level and brightnes when you press FN+Arrow keys ant that are the most important but ALL the FN+F Keys are not showed on screen even if probably they are working (for ex. Fn+F6 correctly enabel1disable touchpad) but not icon showen on screen !! Well I can leave without OSD but once again seems Lenovo don't try EnergyManagement on a Win8 pc.
- CARD READER: Windows detect and unknow device called USB CRW and I though correctly was the card reader, in fact I try a sd and win8 was not able to read it. So I install the Realtek CardReader downloaded from Lenovo site, It was extracted and installed but I don't know why the driver seems bugged, the pattern contains only some icon but not exe ord driver, in fact the Card reader even if I try the driver more times it was not decetced. I tryed the old Windows 7 driver for my S205 and thank of god it was working and now my cardreader is detected and working. Once angain the win8 driver provided by Lenovo fails and I need the oldest win 7 driver that maks the job.
- TOUCHPAD: Synaptics touchpad was detected by windows 8 but all the basic features as the scrolling or 2 fingers was not working. So I try the Synaptics drivers provided by Lenovo and it was only for 32bit system even if is clearly showed as 32 and 64bit driver. The driver itself promp me that is not working on a 64bit system and i need to contact the producer :-(
Hahahaha very hilarious so I have to download the driver from Synaptics server that is so slow that I need 2 hours to finaly have my touchpad driver. Once again an epic fail from lenovo site.
CONCLUSION: Lenovo is the new n.1 pc producer in the world but it seems realy not professional when check his drivers and public it on the website. Could be s205 is the cheapest and not business line notebook but ... I am realy sad whit the way Lenovo put new drivers without any preventive control in the homesite driver's page.
It seems it was a lottery, extracting a number and put the corresponding driver on the S205 drivers page :-(
Sir this is not the good behaviour, is the bast way to loose users !!!! Very disappointed, very sad and I hope this post can help S205 users taht want use the new Windows 8 system to catch the correct solutions
I hope too some Lenovo developers can read this, try win8 on a s205 notebook and solve all the problems, because even if I solve with my 20 years pc experience all the issue, still remais some problems as SRS Sound seems not working (if It can work on our system, but if it can't why put in on our s205 driver too) and no OSD for every FN keys working.
There are not present some utility for win 8 as for example the CAPSLOCK keys utility that was present for 7 but not for 8 (I have to try if the older work on 8) or the Lenovo OneKey that seems not ready for 8..
So far so good winodws 8 works great on S205 and is a good choice if you catch the correct drivers as I explain here.
Hoping this help Lenovo not making the same mistakes in the future, and learn from their errors.
Once angain sorry for my language mistake but I'm not English
Hore this post can help in some case
Bye

Hi Romagnolo1973!
Thank you for posting all the things you learned, and how you got your S205 working with Windows 8! Hopefully this will help others.
To be fair to Lenovo, they list Windows 8 as not supported on the S205.
http://download.lenovo.com/express/WIN8-INDEX.html
As you found, it is sometimes possible to work around the problems and get things working to your satisfaction!
I don't work for Lenovo. I'm a crazy volunteer!

Trying to find Windows 7 driver / software for OfficeJet 4500 (CB867A) connected using Wired Network

Hello,
I am trying to use my Son-in-Law's HP OfficeJet 4500 CB867A (G510G). I am able to SUCCESSFULLY:
Communicate using a browser with the printer (e.g. http:\\192.168.10.139)
Print from my Samsung Galaxy S3 32GB phone using the HP Android software. If finds the printer just find and prints just fine.
Thus the printer looks to be connected successfully to the network. (Wouldn't you agree?)
The problem is installing the printer on our various Windows 7 Ultimate x64 systems. Right now I've only been trying my workstation (Dell T7500). When I follow the directions what comes down is the basic driver and software. The basic driver and software ONLY supports USB. I cam to this conclusion throgh two facts:
The documentation on the download page, when you look at the details says only supports USB. This is true for G510A and G510G. I didn't try G501N, as it is wireless. Maybe it is really Wire and Wireles . . .
I can't get the setup Wizard to try to find the printer through anything but USB.
How do I get Windows 7 to recognize this WIRED (e.g. Cat7 cable) HP All-in-One printer?
Thank you?

Hello,
Thank you for the very quick reply. I will try the download link you gave me.
As for the documentation, I looked again and what I'm seeing says Windows 7 and does say for "USB only." I page and what I'm reading are:
URL: http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-4500-All-in-One-Printer-Series---G510/3...
The text I'm reading says:
Details
The Full Feature Software and driver solution is the complete software solution intended for users who want more than just a basic drivers.
IMPORTANT NOTES
For Windows XP SP 1 Starter Edition and Windows Vista Starter Edition
Only printer drivers and the Toolbox are available
Is supported for USB only
Hardware Setup Wizard is not available
After downloading and installing this software, I got two icons on the desktop. They both (in their own ways) insisted on using USB to connect to the printer. One was a HP Solution Center and the other a HP Printer Setup icon/program.
Again I'll look at your download. Hopefully, it will be what a wired printer needs to print and scan! :-)

Windows Professional x64 Support for Audigy 2 ZS Video Edi

Is there some reason why the Video Editor isn't x64 compatible yet?

For Video Blaster Editor ... we are currently taking steps to insure it runs under 32-bit Vista.
Regarding Vista and Audigy 2 ZS Video Editor ... here are some tips from another user. [I am going to answer every query on this thread with these instructions ... so you'll be sure to see them quite a bit]:
I have used the follwoing procedure to install a working configuration of the Audigy 2 ZS Video Editor in a clean install of Vista Ultimate.
() Download from Creative Labs (US) site: http://us.creative.com/support/downloads/ the following files:
(a) Creative Sound Blaster USB Series Windows Vista Driver .00.0060 - USBVS_PCDRV_LB__00_0060.exe (from the Vista section)
(b) VidCap for Creative Sound Blaster Audigy 2 ZS Video Editor .00.000 - A2VX_PCVDE_L9__00_000.exe (from the WinXP section)
(2) Use WinZip or WinRAR to open the file (b) and extract the folders \DrvInst and \Vidcap into your Vista Downloads folder.
(3) Connect the Video Editor to the power supply and a video source; connect the USB cable to your PC. Ignore the "Found NEw Hardware" dialog that pops up.
(4) Doubleclick on file (a) to install the Creative Sound Blaster USB Series Windows Vista Driver, and follow prompts as required; accept all defaults. After install is complete, let the PC reboot.
(5) After rebooting, in the "Found New Hardware" dialog that appears, select the options to search for a driver, don't go online to search, browse for a driver and point the search at the \DrvInst folder you extracted in (2) above. The USB video driver will be installed from the \DrvInst\Video\Driver\Win2k.
(6) After the video driver is installed, doubleclick on the Setup.exe file in the \Vidcap folder you extracted in (2) above to install the Vidcap application.
(7) Setup the options in Vidcap, and run a test recording.
Happy capturing under Vista.

Windows 7 driver support for T60(p)

Similar Messages

Maybe you are looking for