Windows 7 Drivers for iMac (Lion preinstalled)

While installing Windows 7 in my new iMac (LION preinstalled). When it’s creating the driver cd, while the drivers are being downloaded, the process comes to a halt (around 25% completion) and does not proceed any further. Now i have installed Windows 7 but dont have the drivers due to this reason, Please help. (my internet connection is working properly)

you didn't look for how to.
copy drivers to folder on Windows
then, Troubleshoot Compatiblity Mode on that BOOTCAMP64.msi
Voila
you could buy Lion and then download 4.01+ also

Similar Messages

  • Windows audio drivers for iMac Intel

    Hi
    I accidently deleted the Windows audio drivers on my machine. The audio works fine in Mac mode but errors out looking for the drivers in PC mode.
    My brain errors out looking for the page with the proper drivers.
    Any leads greatly appreciated..

    Thanks for responding.
    Yes, I have Boot Camp back-up CD (2 copies actually - 'Macintosh Drivers for Windows XP')
    Error message I get when I run the set-up file from either copy: "Unable to locate file Macintosh Drivers for Windows.xp.msi."
    Is there anywhere on line to download the drivers?
    Thanks again

  • Can't download windows 8 drivers for mountain lion.

    It gives me an error, "Can't download windows support software because of a network problem."
    This is my first time settting up bootcamp for windows 8. Even if I do download the files manually, what do I do with them?

    It says Windows 7 and Windows 8, read it again.

  • How could i download drivers for imac mc814 for windows 7 ? and from where ?

    how could i download drivers for imac mc814 for windows 7 ? and from where ?

    If you are trying to run MS Windows in Boot Camp then please post in the correct forum, the Boot Camp forum. That is where the Windows guys hang out.

  • Locating drivers for Imac 24" (Early 2008) to work with Vista 32 bit

    Hi all. I'm really having trouble with my Mac and was wondering if anyone has an alternative.
    I have an Apple iMac "Core 2 Duo" 2.8 24-Inch (Early 2008) running OSX 10.5.8. I recently partition my hard disk using Bootcamp and installed Windows Vista 32 bit.
    This is where the problem starts. I misplaced the driver DVD's that came with the mac and i am in dire need of the drivers especially for the video card (ATI Radeon HD 2600 pro). I was able to download the drivers for the video card but, anytime i try to install or play a game for example, Call of Duty 4: Modern Warfare it always give me a error that no drivers were found and the game crashes.
    Has anyone else encountered this problem?
    Does the Apple website provide drivers for Imac 24" drivers for Windows Vista 32 bit?

    Patrick,
    Welcome to Apple Discussions.
    You will either need to find your install discs that came with the computer or contact Apple and they will replace them for a nominal charge.
    Going forward keep these and other original installation media in a safe place.
    Regards,
    Roger

  • Sony VAIO (VGN-NW130D) - Will Sony provided Windows 10 drivers for this model?

    Hello Sony, I have a Sony VAIO (VGN-NW130D). I purchased it new in 2009. It had Windows Vista preinstalled and a bought a Windows 7 disc for my computer. Here are my questions: http://community.sony.com/t5/VAIO-Windows-10/Windows-10-upgrade-Information/m-p/513320#U513320In the above link PeterT mentions the models that Sony will provide Windows 10 drivers for. Will these be the only models Sony will provided drivers for? http://esupport.sony.com/CA/p/os10upgrade.plIn the above link Sony says it will provide drivers for models that had Windows 7 and 8 preinstalled. What if you bought a Windows 7 disc? I have tried to install Windows 10 by forcing it to do so by command prompt, and by Installing it from Microsoft's website. Both tries where unsuccessful. It would get stuck on the black upgrading screen at 32% overall and 6% installing windows features and drivers. I reserved my copy of Windows 10 and my computer meets Windows 10 requirements. If my computer meets Microsoft's requirements my PC manufacturer should provide the Windows 10 drivers. If Sony choose not to provided Windows 10 drivers for all their PC that are compatible with Windows 10, it will be really off putting and resulting in me never purchasing another Sony PC. It tarnishes a company's reputation when they do unfair things like this. This would just not be fair Sony. Sincerely,Concerned Sony customer (thinking of switching to a Mac after this horrible experience)

    Light wrote:
    Hello, Thanks for the replay. How do you know what vendors our computers need drivers from? Do you know if Microsoft might provide us with drivers? Been reading some of the other posts and found out that Sony has sold the VAIO brand. I will never be buying another Sony computer or other Sony products again. This is just bad customer service.Sony has said that we will have to get drivers from Microsoft.  Or we will have to use the drivers that come with Win 10.  You have to read other topics in this forum to find this. I have two VAIO's that aren't on the Sony supported list and one VAIO that IS on the supported list. I have to wait until Sony proivides the drivers for my supported VAIO. I will have to wait until Microsoft provides drivers for my other VAIO's. I have a fourth desktop generic PC that I have upgraded from XP to Win 7.  I tried to install Win 10 on it but the Win 10 video driver only supported VGA for my legacy video board.  I rolled Win 10 back to Win 7 and I will wait until I can get a Win 10 driver for my video card.  If I can't get one, I will have to replace the video board with something that has Win 10 drivers. I won't have that option for my VAIO's because I can't replace the video boards.  If Microsoft or GeForce don't provide a driver for my video boards, I will not install Win 10.  I don't like it as much as Win 7, from what I've seen so far.

  • Windows Vista Drivers for 1820 and 1616 - Lets have some drivers ple

    RePost from http://www.productionforums.com/view...?p=47643#47643<img alt="" src="http://www.productionforums.com/images/icons/icon8.gif[/img]?Lets have some drivers please
    <span class="postdetails">Windows Vista Drivers for 820 and 66
    I hate to say this about E-MU but the way they are dealing with Vista Drivers is unprofessional. I am a repeat customer of Creative products and was so impressed by my old Platinum eX that I bought a second to run duals for tons of audio processing. That was back in the day. Then I jumpped ship and tried out an M-Audio Firewire 40. That did not last too long beforei was completely unimpressed. So I came back to Creative... Purchased a 820 in the box. So impressed I turned around and purchased a 66 in the box just 8 months later. Both ran smooth as butter... All until i just recently built my new system designed primarily with audio production in mind.
    With a setup like this, who needs a mac?
    AMD Athlon X2 x64 Dual Core +6000 3.0 Ghz
    2 Gigs Corsair
    Samsung SyncMaster 206BW 2" Wide Screen
    EVGA NVidia 9700s 256 DDR3 Graphics
    SATAs up the yin
    and a PCIMIA to PCI Dock
    All under Vista Ultimate OEM
    And Guess what?
    Months into RTM of Vista...
    E-MU is caught pushing release dates.
    Last month it said they would release beta drivers middle of April...
    I waited, patiently I might add.
    I waited<waited some more, I try running xp drivers... computer wont even try to install them properly.
    My software waits, computer waits, turns into a gameing machine just because my all together 600 dollar investments in Creative are not important enough to leld me the drivers i need to be producti've in what i love.
    I need x64 drivers stat. I need them working, I need them installable without a glitch, a hitch, no driver signing problems, no questions, no fuss no muss. I find it ironic that you guys at E-MU are willing to jump right in there and make sure to have drivers compatable for you new products, yet faithful advocats of the most powerful soundcards you have are sitting here dead in the water because you dont find it nessesary to place priority on ready and waiting end users who have purchased long term support buy investing large amounts of moola into hardware from your company.
    Come on, its not like the 820 or the 66 are exactly legacy technology. We are talking about Hardware that is only two years old and should be usable for up to 6 years. This is deffinatly a strike against the company and just goes to show where Creative stands.
    I have stood by waiting in silence for a very long time.
    Now i think my time has come to tell how i feel and i believe there are alot of others out there that feel the same. the only items that do not work soothly are my E-MUs... go figure.
    And I have been looking forward to all i can do running both of them side by side.
    Oh yes, and that link posted above to the beta news for vista... its a joke. open up your betas, and have a real dev tell us what the hang ups are... At least give us real concreate reasons why it is taking so long.
    with that said, when you guys get yoru act together and get me some drivers, I will sit happy as a lark.
    My thoughts for today.
    ~Alpha-Beta ReaKKtor

    Hello Silas,
    sorry for my bad english
    I already checked that page. On the first time I was trying to install Vista on a clean hard drive. The installation process finishes without errors but after installation Vista shows me a lot of error messages, mostly about unknown hardware. So I installed all available drivers I have found on Toshiba web site. It not helped me too much, hardware problems still remains. I could not find out what exactly causes probles. Finally I decide to install XP and then upgrade to Vista. Now everything seems to be ok. :D
    There was some hardware problems but much easier to resolve. It seems to me that Toshiba did not provide all the drivers, for example StarForce Protection drivers. Vista did not recognized this hardware on the first time.
    Now it works!

  • HP laserjet 1020 printer Drivers for iMac

    Please, where I can find out HP laserjet 1020 printer Drivers for iMac OSX 10.9.2 ?
    Thanks.
    JHBarbosa
    This question was solved.
    View Solution.

    Your answer solved my doubts. Now, it's clear to me what I have to do. Thanks.
    JHBarbosa

  • I have a Lexmark X1185, but I do not have the driver CD that came along with it. I have a 15" MacBook Pro (Late 2011) and I cannot seem to find drivers for OSX Lion.. Where can I find the drivers?

    I have a Lexmark X1185, but I do not have the driver CD that came along with it. I have a 15" MacBook Pro (Late 2011) and I cannot seem to find drivers for OSX Lion.. Where can I find the drivers? Thank you for the help!

    Have you looked on Lexmark's support site?
    http://support.lexmark.com/index?page=content&id=OS23&locale=en&userlocale=EN_US

  • Need Windows 8 drivers for my Satellite L850-A848

    hey i cant find windows 8 drivers for my Satellite L850-A848
    The short model number PSKACV is but shown in the list.....but upon searching it shows 0 drivers found......why is it so??
    are the drivers not available now....??it's a matter of urgency.....do reply

    > .why is it so??
    Hey dude . this user to user community.. nobody here can say why the drivers are not available for this series
    Fact is that here on this Toshiba page you can find a Win 8 driver upgrade matrix
    http://eu.computers.toshiba-europe.com/innovation/jsp/checkWindows8Compatible.do?service=EU
    If your notebook model is not listed, the Win 8 drivers will not be released.
    Anyway you can try to install some Win 8 tools released for other series.
    For example the installation of Toshiba value added package (VAP) should be possible on all Toshiba notebooks.

  • Any update on Windows PV Drivers for 3.0.2?

    I have an outstanding SR on this (SR 3-4973876887) - opened two weeks ago.
    We seem to be experiencing intermittent performance issues with the 2.2.2 PV drivers. We'll be getting 30MB/s, restart the guest, and get 100MB/s. Guest VMs running Windows 2008R2 will randomly boot to BSOD and get stuck in a reboot cycle. We will set the driver type in the guest setting to HVM with PV Drivers, only to find a few days later that somehow it's set itself back to HVM only. So we've kind of lost confidence in the 2.2.2 x drivers - which used to be pretty rock solid on OVM2.
    So it would be handy to know when Windows PV drivers for OVM 3 will be out. Unless they are being kept back until 3.0.3?
    Another question - for Windows 2008R2 - the OS type - should we be using Windows 2008 or 'Other Windows'.
    Cheers,
    Jeff

    Jeff_J wrote:
    So it would be handy to know when Windows PV drivers for OVM 3 will be out. Unless they are being kept back until 3.0.3?We're waiting on WHQL certification on Windows Server 2008 R2 right now. They are due for release with 3.0.3. They have passed certification on 2003 (32/64-bit) and 2008 so far. If you want access to the beta/preview release of the 3.0 drivers, please contact your Oracle VM Pre-sales technical consultant. If you don't know who that is, drop me an email at myFirstname dot myLastname at Oracle dot com and I'll find out for you.
    Another question - for Windows 2008R2 - the OS type - should we be using Windows 2008 or 'Other Windows'.It should be Windows Server 2008.

  • Can't Download Windows 7 Drivers for Bootcamp?

    Hi,
    I have been trying since 2 weeks to download windows 7 drivers for bootcamp but the process just gets frozen at that point. I live in a 3rd world country and don't have a good connection. My DSL's speed is 2mb and I can easily downoad movies and hd seasons but because of the awesome servers of Apple, I can't download these much needed drivers.
    Is there some direct linking to these drivers so I can download them or any other alternative?
    Thanks a lot

    Using Boot Camp is the only method to obtain the drivers, be patient and try again.

  • Windows 10 Drivers for hp pavilion x2 10.1 inch 32 bit tablet

    Where can i find? Windows 10 Drivers for hp pavilion x2 10.1 inch 32 bit tablet 

    I am sorry sir for not ellaborating it more. HP Pavilion x2 Detachable Laptop 10-k007na (10 inch, Intel Atom 1.33 GHz, 2 GB RAM, 32 GB Memory, Windows 8.1 Here Yes I have already upgraded it to Windows 10. Thanks 

  • Windows 8 drivers for ICD-ST10

    Windows 8 drivers for ICD-ST10

    The ICD-ST10 Voice Recorder was first released in the market last 5/1/2003. Unfortunately, we don't have Windows 8 driver for it. 
    If my post answers your question, please mark it as "Accept as Solution"
    http://bit.ly/Win-4K

  • How to install latest ATI drivers for iMac 2011 with BootCamp and Windows 7?

    Hi,
    i want to install the latest ATI / AMD drivers for my brand new iMac 2011 6970M 2GB under windows 7 to play GAMES (<- one of the reasons to buy a new mac)
    What I tried:
    1.: Update with latest mobilty driver vom amd. -> doesn't work.
    2.: Uninstall all amd software (driver sweeper)
         Install the latest drivers... -> doesn't work.
    What should i do? Buy a PC?
    thx

    I installed other driver and it works fine for me. :
    http://www.hardwareheaven.com/mobility-radeon-drivers-support/206549-ati-mobilit y-catalyst-11-6-display-drivers-notebooks-15-06-2011-a.html
    ATI 11.6 Catalyst drivers...
    Thx for help.

Maybe you are looking for

  • Syncing issues with iPad 2

    Here is my setup: iPAD 2 (64gb, no 3G) Windows 7 PC Everytime I connect my iPAD via USB to iTunes, iTunes keeps claiming it can't sync with it.  Reinstalled iTunes twice, same result.  ITunes wants me to restore my iPad everytime.  On the times that

  • Adobe flash player won't download to my imac running Yosemite

    The download stops at 25%. I uninstalled the old Flash player and trashed all to old files, so now I have no flash player at all. Safari said I needed tp download a new version. Harry Bernard.

  • Hiding a contenet area or subform in Adobe..!

    Hi Guys,               I have a requirement to disaply one window from two different window of info depends on a condition. I am thinkning of using Content Area or Subform for this. How to control the visibility of the content area/Sunform through co

  • Mobilesync has stopped working

    I just finished upgrading to ITunes 9 and my IPhone no longer syncs with Microsoft Outlook - all I get is the following error message - "mobilesync has stopped working". In checking the internet, this seems to be a widespread problem with no fix curr

  • Problems with C7 symbian Anna updating

    Please answer immediatly!! I have a C7 with Symbian Anna Today I update the software with Ovi Suite but on 3th phase, the Cell doesn't restart Pleaseeee help me!! How can I resolve the problem?