Windows 7 (Ent) Sp1 on server 2012 R2 HyperV, RFX USB redirection not working

Hello,
I currently have windows server 2012 R2 with HyperV installed. I have built two virtual machines. A windows 8.1 and Windows 7 sp1. Both are enterprise editions
For RemoteFX the hypervisor is using a Zotec GTX 760 GPU. It recognizes it and uses it to apply remoteFX adapter on my Windows 7 Sp1 VM.
As you are aware I do not need to use a GPU to enable RFX on my Windows 8.1 it can do this without the need of a GPU.
Using an RDP client( v8.1) I can connect to my Windows 8.1 VM with a USB headset,memory Key or a printer and they all enumerate on the Virtual machine. The driver for each device installs
and I can use the device without any issues.
However this issue lies with the Windows 7 SP1 VM. I can connect to it via RDP( Same client) but I cannot redirect any devices to it. I have installed the latest integration services available on the VM. I have ran all updates available.
Because I have ran all updates the rdp version on the VM is running v8.1.
Previous to installing the updates USBr still was not working
I have enabled the following group polices under remote desktop services on the Windows 7 SP1 VM :
RDP 8.0 -- Enabled
Configure RFX -- Enabled
Is there a known issue with USB redirection not working on a Windows 7sp1 virtual machine hosted on server 2012 Hypervisor ??
Many Thanks
Brian

Hi,
According to the log above, I found that we run the script on both Server6 and Server7. Errors as below:
Server6: Conversion is not supported in restricted language mode or a Data section.
Server7: Couldn't figure out valid servers from the specified destination scope. Check your parameters and try again.
Since we can only run the RollAlternateserviceAccountPassword.ps1 Script on CAS server, the script not works well if Server6 is MBX server.
For Server7, based on the error message, it seems you still have no right to run the script/cmdlet.
Please add your account to Organization Management Role group(ADUC->domain.com->Microsoft Exchange Security Groups) to test if possible.
By the way, from Technet:
You need to be assigned permissions before you can perform this procedure. To see what permissions you need, see the "Client Access Security" entry in the Client Access Permissions topic.
Client Access Permissions
http://technet.microsoft.com/en-us/library/dd638131.aspx
Feel free to contact me if there is any problem.
Thanks
Mavis
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

Similar Messages

Fujitsu fi-6130z scanner doesnt work on Windows server 2012 using Remote Fx USB Redirection

I'm using Wyse WES7 SP1 client and using RDP, i'm connecting to RD Host Server 2012 standard edition with Remote FX enabled. scanner is able to redirect using Remote Fx and i've installed appropriate scanner driver on server. the scanner is listed in Device
and Printer option of Control Panel.
I'm using MSPaint application to scan my document, but when i click on From Scanner or camera, it dispalys
"Unable to Retrieve picture from device.Verify the device is properly connected and try again" warning message. i couldnt able to scan the document.
But with Wyse TCX USB redirection it works fine.
Is there any server side configuration for the scanner to redirect and work properly ? am i missing something ?
Kindly helpp me to troubleshoot this problem
Raveendra Pai

Did you ever get this working? I am having similar issues trying to redirect a 6130z thru RDP to a 2012 R2 server.

Server 2012 - Windows 8 RemoteFX USB Redirection not working

I have setup a test envrionment with Server 2012. RDS has been installed. Hyper-V, RDCB, RDWeb, and RDVH are all on the same box. I have a personal unmanaged Remote Desktop Virtual pool with one test virtual running Windows 8. I have
enabled RemoteFx USBdirection in Group Policy on every machine involved and forced GP update.
I can see my devices in the Remote Desktop Connection details on the client (i.e. it shows up under Local Resources/Local devices and resources/More/Other supported RemoteFX USB devices. Or, if you prefer, I have added "usbdevicestoredirect:s:*"
to the .rdp file that the Web Access spits out then I log in to web page and attempt to connect to my published virtual machine.
The problem is that the devices do not show up anywhere in the virtual machine's device manager once logged in. Furthermore, there is no Universal Serial Bus node in device manager at all. I do not have a RemoteFX compatible GPU available for
hyper-v or the virtual machine, but it is my understanding with Server 2012 and Windows 8 this is not necessary.
Does anyone have any ideas? I thought I saw a [email protected] or similar email on one of the blog comments, but I can seem to find the post again, I have scoured the internet relating to usb redirection and remotefx and it is a disorganized mess.
Thanks.
Wayne

The first device I am focusing on is a desktop scanner, an Epson GT-S50. This device shows up in the client's Remote Desktop Connection details as a "RemoteFx Other supported RemoteFX USB Devices".
Although, and perhaps I'm a total fool, but, I have not installed Epson's specific drivers for this scanner on either the client, nor the VM. My client's Device Manager currently shows the scanner under "Other Devices" as "Epson Scanner". The
Device Status says that "The drivers for this device are not installed". My expectation was that this was still enough to redirect the same object (and its condition) to the VM. At that point, I expected the VM to see and respond
(in its own Device Manager) the same way, at which point I would then install the Epson-specific driver package on the VM (i.e. without ever having to install the Epson package on the client).
The second device I wanted to test was a Ezurio BRBLU03 Bluetooth Adpater. This device's drivers have been installed on the client and works flawlessly, locally. However, this device is not showing up at all under "RemoteFx Other supported
RemoteFX USB Devices", even after "usbdevicestoredirect:s:*" was specified. I suppose this is a separate issue, and I was planning on troubleshooting this next. For now I just wanted to see a proof of concept that a device that RD can see can in
fact be redirected.
I guess I have based my expectations on the experience we had with a third-party USB redirection tool that we tested prior to engaging in testing RDS.
My client is running Windows 8 Enterprise, and the VM (vhdx) is running the same. When you refer to the RDC 8 update, isn't that already included in this OS? In other words, is that only a concern if I were using Windows 7?
Thanks for your help.

Cannot install SharePoint 2013 with SP1 on server 2012 R2. IIS configuration error

Hey Guys,
I'm experiencing a problem which seems to be common considering the number of posts I've found about it, but none of the provided solutions worked for me.
I'm simply trying to install SharePoint 2013 with SP1 on a Windows Server Standard 2012 R2.
I've downloaded from the MS Volume Licensing website the "SharePoint Server 2013 with SP1" ISO file : SW_DVD5_SharePoint_Server_2013w_SP1_64Bit_English_MLF_X19-36118. So
this is the slipstreamed version which is supposed to bring compatibility with 2012 R2.
As I do not have direct access to the Internet I need to perform an offline installation. I also downloaded all prerequisities. When I run prerequisiteinstaller.exe with the necessary arguments, I get the following :
(Full log file is below)
I've tried the following :
- Restarted the server multiple times
- Manually removing/adding IIS role + restart
- Running the prerequisiteinstaller.exe from the DVD or from an extracted version
- Manually installing the prerequisities
- Installed .Net 3.5 as recommended here (http://social.technet.microsoft.com/Forums/office/en-US/0b597d35-b02d-4236-894d-38efc0c7c6f6/sharepoint-2013-with-sp1-install-on-windows-server-2012-r2?forum=sharepointgeneral)
None of the worked. So I'm stuck and I must completed the installation of this before the end of the week for an important project !
Your help would be greatly appreciated.
this is the complete log file :
2014-09-09 14:30:26 - Processor architecture is (9)
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Common Startup
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
2014-09-09 14:30:26 - Trying to remove the startup task if there is any.
2014-09-09 14:30:26 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
2014-09-09 14:30:26 - Successfully deleted the startup task
2014-09-09 14:30:26 - Analyzing the following command line argument:
2014-09-09 14:30:26 - /continue
2014-09-09 14:30:26 - Continuing after restart
2014-09-09 14:30:26 - Details of the current operating system:
2014-09-09 14:30:26 - Major version number of the operating system: (6)
2014-09-09 14:30:26 - Minor version number of the operating system: (2)
2014-09-09 14:30:26 - Build number of the operating system: (0X23F0=9200)
2014-09-09 14:30:26 - Major version number of the latest Service Pack: (0)
2014-09-09 14:30:26 - Minor version number of the latest Service Pack: (0)
2014-09-09 14:30:26 - Platform ID of the operating system: (2)
2014-09-09 14:30:26 - Product suites available on the operating system: (0X110=272)
2014-09-09 14:30:26 - Product type of the operating system: VER_NT_SERVER
2014-09-09 14:30:26 - Product type: (0)
2014-09-09 14:30:26 - OS type: (2)
2014-09-09 14:30:26 - Configuring the application's property sheet...
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Windows Management Framework 3.0
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - PowerShellVersion
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 4.0
2014-09-09 14:30:26 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft .NET Framework 4.5
2014-09-09 14:30:26 - Reading the following DWORD value/name...
2014-09-09 14:30:26 - Install
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-09-09 14:30:26 - The value is (1)
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Version
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 4.5.51641
2014-09-09 14:30:26 - A post release .NET 4.5 is installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Windows Identity Foundation (KB974405)
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 -
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 6.1.7600.0
2014-09-09 14:30:26 - The prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-09-09 14:30:26 - Reading version of the following file...
2014-09-09 14:30:26 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-09-09 14:30:26 - GetFileVersionInfoSize failed (-2147024894)
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Version
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 10.51.2500.0
2014-09-09 14:30:26 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Windows Server AppFabric
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - ProductVersion
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Windows Identity Foundation (KB974405)
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 -
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft Information Protection and Control Client
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 -
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft WCF Data Services 5.0
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Version
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 5.0.51212.0
2014-09-09 14:30:26 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Microsoft WCF Data Services 5.6
2014-09-09 14:30:26 - Reading the following string value/name...
2014-09-09 14:30:26 - Version
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.6
2014-09-09 14:30:26 - The value is...
2014-09-09 14:30:26 - 5.6.61587.0
2014-09-09 14:30:26 - The prerequisite above is already installed
2014-09-09 14:30:26 - Check whether the following prerequisite is installed:
2014-09-09 14:30:26 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-09-09 14:30:26 - Reading the following DWORD value/name...
2014-09-09 14:30:26 - IsInstalled
2014-09-09 14:30:26 - from the following registry location...
2014-09-09 14:30:26 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-09-09 14:30:26 - Beginning download/installation
2014-09-09 14:30:26 - Created thread for installer
2014-09-09 14:30:26 - "C:\Windows\system32\dism.exe" /online /enable-feature /featurename:NetFX3 /All /norestart
2014-09-09 14:30:27 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:28 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:29 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:30 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:31 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:32 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:33 - Install process returned (0)
2014-09-09 14:30:33 - [In HRESULT format] (0)
2014-09-09 14:30:33 - "C:\Windows\system32\WindowsPowerShell\v1.0\powershell.exe" -ExecutionPolicy Bypass "C:\Users\DADM_T~1\AppData\Local\Temp\PreFB24.tmp.PS1"
2014-09-09 14:30:33 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:34 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:35 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:36 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:37 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:38 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:39 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:40 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:41 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:42 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:43 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:44 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:45 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:46 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:47 - Install process returned (0)
2014-09-09 14:30:47 - [In HRESULT format] (0)
2014-09-09 14:30:47 - "C:\Windows\system32\dism.exe" /online /enable-feature /all /featurename:IIS-ASPNET45 /norestart
2014-09-09 14:30:47 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:48 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:49 - Install process returned (0)
2014-09-09 14:30:49 - [In HRESULT format] (0)
2014-09-09 14:30:49 - "C:\Windows\system32\iisreset.exe" /noforce
2014-09-09 14:30:49 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:51 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:52 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:53 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:54 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:55 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:56 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:57 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-09-09 14:30:57 - Install process returned (0X426=1062)
2014-09-09 14:30:57 - [In HRESULT format] (0X80070426=-2147023834)
2014-09-09 14:30:57 - Last return code (0X426=1062)
2014-09-09 14:30:57 - Reading the following DWORD value/name...
2014-09-09 14:30:57 - Flags
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Updates\UpdateExeVolatile
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - PendingFileRenameOperations
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SYSTEM\CurrentControlSet\Control\Session Manager
2014-09-09 14:30:57 - Reading the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
2014-09-09 14:30:57 - Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
2014-09-09 14:30:57 - Last return code (0X426=1062)
2014-09-09 14:30:57 - Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any command line options.
2014-09-09 14:30:57 - Cannot retry
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Windows Management Framework 3.0
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - PowerShellVersion
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 4.0
2014-09-09 14:30:57 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft .NET Framework 4.5
2014-09-09 14:30:57 - Reading the following DWORD value/name...
2014-09-09 14:30:57 - Install
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-09-09 14:30:57 - The value is (1)
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - Version
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 4.5.51641
2014-09-09 14:30:57 - A post release .NET 4.5 is installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Windows Identity Foundation (KB974405)
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 -
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 6.1.7600.0
2014-09-09 14:30:57 - The prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-09-09 14:30:57 - Reading version of the following file...
2014-09-09 14:30:57 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-09-09 14:30:57 - GetFileVersionInfoSize failed (-2147024894)
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - Version
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 10.51.2500.0
2014-09-09 14:30:57 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Windows Server AppFabric
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - ProductVersion
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Windows Identity Foundation (KB974405)
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 -
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft Information Protection and Control Client
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 -
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft WCF Data Services 5.0
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - Version
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 5.0.51212.0
2014-09-09 14:30:57 - A higher version of the prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Microsoft WCF Data Services 5.6
2014-09-09 14:30:57 - Reading the following string value/name...
2014-09-09 14:30:57 - Version
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.6
2014-09-09 14:30:57 - The value is...
2014-09-09 14:30:57 - 5.6.61587.0
2014-09-09 14:30:57 - The prerequisite above is already installed
2014-09-09 14:30:57 - Check whether the following prerequisite is installed:
2014-09-09 14:30:57 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-09-09 14:30:57 - Reading the following DWORD value/name...
2014-09-09 14:30:57 - IsInstalled
2014-09-09 14:30:57 - from the following registry location...
2014-09-09 14:30:57 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-09-09 14:32:19 - Opening log file
2014-09-09 14:32:19 - Opened action for user
2014-09-09 14:32:19 - C:\Users\DADM_T~1\AppData\Local\Temp\prerequisiteinstaller.2014.09.09-14.30.26.log

Thank you guys for the quick answer! Muche appreciated
I've tried all suggested solutions, but no luck :-(
- tried http://support.microsoft.com/kb/2765260 > no help and by the way the hotfix provided is not applicable for 2012 R2.
also tried "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regii -enable -i" and got this :
Microsoft (R) ASP.NET RegIIS version 4.0.30319.33440Administration utility to install and uninstall ASP.NET on the local machine.Copyright (C) Microsoft Corporation. All rights reserved.Start installing ASP.NET (4.0.30319.33440).This option is not supported on this version of the operating system. Administrators should instead install/uninstall ASP.NET 4.5 with IIS8 using the "Turn Windows Features On/Off" dialog, the Server Manager management tool, or the dism.exe command line tool. For more details please see http://go.microsoft.com/fwlink/?LinkID=216771.Finished installing ASP.NET (4.0.30319.33440).
http://social.technet.microsoft.com/wiki/contents/articles/14582.sharepoint-2013-install-prerequisites-offline-or-manually-on-windows-server-2012-a-comprehensive-guide.aspx
> is not for 2012 R2.
For the automated install script (http://gallery.technet.microsoft.com/office/DownloadInstall-SharePoint-e6df9eb8) Craig mentions that the script are not yet compatible
"SharePoint 2013 SP1 and Windows Server 2012 R2 support coming soon
I will be updating this script with support for SharePoint 2013 Service Pack 1 installations along with support for Windows Server 2012 R2 in the near future. Thank you to everyone for the interest in my scripts - it is much appreciated! "

Hyper-V host server upgrade from Server 2008 R2 Enterprise SP1 to Server 2012 R2 Datacentre

We are about to upgrade our Hyper-V host servers from Server 2008R2 Enterprise SP1 to Server 2012 R2 Datacentre to take advantage of the latest Hyper-V features.
This only concerns the host servers and not the guest VMs running on the hosts (they will be upgraded next year).
This is what is running on our host servers:
Host 1
File,print & issuing CA server
Exchange 2010
SharePoint 2010
Quickbooks server
Domain controller 1
Offline CRL CA
Host 2
SQL 2008
Forefront TMG 2010
Domain Controller 2
Windows 7 client
With this is mind, I have drafted a rough action plan as follows:
Create a list of all file locations for VM memory, snapshots, virtual memory and Hyper-V config files
Document all existing system settings
Gather server information, download drivers, RAID controller and other boot drivers & firmware updates (in case the in-place upgrade fails)
Test all software media
Copy all VMs onto external data storage (NAS drive)
As part of the upgrade process we will redistribute some hard drive space i.e.
expand them to their new sizes and verify the data integrity of copied VMs by powering up each VM in a test environment
Wipe and adjust the sizes of the host partitions to accommodate the expanded VMs
Perform an in-place upgrade to Server 2012 R2 Datacenter
Check EV, services etc
Change the default locations for VM memory, snapshots, virtual memory and Hyper-V config files
Upgrade Anti-virus and other system software
Test the system
Are there any glaring omissions? Does anyone have any tips they can give me?

Hi Marco,
always do a fresh Installation of your hyper-V Hosts, you could end up doing a lot of Troubleshooting with Drivers,Addons etc.. new Installation ist way faster.
Depending if you have a Cluster or Standalone Servers there are different ways to do it.
When you have installed your 2012 R2 Hyper-V Server you just can Import the VMs from the new Location.
As far as i know VMs with snapshots are not supported, so you have to remove them before doing that move and commit the changes to the vhd files, the VM need to be offline on 2008R2 to do that.
You do not Need to Export the VMs on 2008R2, just copy it, normaly you should have all Files of a VM in one Folder.
A working Backup is always your friend on such Tasks.
When the VMs are running on Hyper-V 2012R2 do not forget to Update the Integration Services.
Make Sure your Servers Hardware are still supported with 2012R2, see Server Catalog and Support Matrix of the Vendor.
And last one, where possible and supported convert the VHDs to VHDx Disks, after testing the first boot of the VM.
Udo

Digital Filing broken with windows 8.1 and Server 2012 R2?

Hello
Recently upgraded my machines so now I have Windows 8.1 and Server 2012 R2 running. The scanning from my Officejet L7680 to a network share on one of these machines is no longer working.
Looking into it with network monitors I can see that the login of the user and password is working but then the save of the file on the share gives and error.
In windows 8.1 it starts creating the file but cannot add content to it (so the file is 0 Bytes in size) on Server 2012 R2 the creation of the file already gives and error.
Searching around the web seems to indicate that changes in the SMB protocol on the latest windows versions are the cause of this and other MFP suppliers are providing firmware updates to fix this. There seems no way to fix this at the Windows side.
Can HP confirm this issue and indicate which all in ones will be able to connect to network shares on these latest windows version ? With or without a firmware update.

I can confirm that I'm experiencing the same issue on my Windows 8.1 x64 machine and Windows 2012 R2 Essentials. Will there ever be a firmware update for the L7680 printer so we can get this functionality working again?

Can't change printer port on Windows 8.1 and Server 2012 R2

1. Install "Lexmark X646e Class Driver" using a in-box print driver (i.e. one comes with the Windows installation base) .
2. Go to "Printer properties" -> "Port"
3. Select a custom monitor port, and the following error occurs in Event Viewer.
An error occurred while configuring print queue 'Lexmark X646e Class Driver'. Printer driver 'Lexmark X646e Class Driver' may not be used in conjunction with a non-inbox port monitor.
Same steps applied on Windows 8 and Server 2012, and not issues found. The restriction/limitation is newly added in Window 8.1 and Server 2012 R2.
Changing to a custom monitor port after printer driver installation is very important for us.
How can we solve or workaround the above issue, so it can behave like Windows 8 and Server 2012?

What Port Monitor just so I can bubble this information to some others?
Alan Morris Windows Printing Team
Hi Alan:
We developed a custom printing system, which involved the following configurations:
1. Create a custom port monitor on server 2012 r2.
2. Change an existing print queue to use this custom port monitor, and share this print queue.
3. All workstations will print to this shared print queue on the server.
The goal is to manage/monitor the print information in StartDocPort for all printing for instance. This is what we've been doing for a long time.
Now we upgraded our system from server 2012 to server 2012 R2, but we can't change the port monitor to our ones anymore.
I've tried the Type3 printer driver, such as Brother Color Type3 Class Driver, unfortunately it didn't work if the installation is using "Add a printer", and select the driver from the list.
The only way to make it work is to install the printer driver using the one downloaded from the vendor's website, this will bypass Windows "Add a printer".
Is there any chance we can make this to behave like server 2012 or earlier? Modify registry keys?
Cheers
Steven

Installed Windows & 32 Bit But Drivers and USB ports NOT WORKING.

I bugh an HP Pavillion TS 14 Notebook that came preinstall with Windows 8.1 64 bit which I hate so wiped the drives and installed Windows 7 32 bit and now I have a big problem. None of my network drivers work and the 2 uSB ports where I plug my mouse and other SB hardware in no longer work.
I did a back up of the SW Set up file that has all of the HP dvers for my laptop but both the network and video divers won't install. And When I try to install the drives I get the eror message saying they are not compatible with this version of Windows.
I have loked on the HP website under my laptop model which s as above but HP don't do drivers for Windows 7 32 for my laptop. And I have looked on both the Realteck website for both the Realteck ethnet and Realteck wireless network drivers but none of them work or install on my operating system. The video drivers Intel don't work either. So I am really stuck a I cannot go back to Windows 8.1 as though that 32 bit Windows 7 would work on my laptop but most of my drivers are not compatible with the operating sytem And I don't want to install 64 bit Windows as I like 32 bit.
The drivers that are not working on Windows 7 32 bit are:
Realteck RTL8188EE 802-11b/gn witeless lan
Realteck ethnet die and
Intel High definition graphcs driver
Which don't work at all on Windows 7 32 bit as they are 64 bit only drivers.
So can you please post me a link bth the network and Intel graphics drvers that work with my laptop. As I have tried lots of different Realteck and raphics drivers for Window 7 but NONE of them work on my system. And None of my USB ports are working either. So how do I solve this problem?
This question was solved.
View Solution.

Hi:
Should be no problem to get W7 32 bit to work on that model.
Just use all of the drivers and software from the HP Probook 450 G0 on your model except the Audio, BIOS and firmware files.
Your model uses the Intel HD graphics driver only.
The first driver you have to install is the Intel chipset installation utility and then reboot.
http://h20565.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?cc=us&lang=en&sp4ts.oid=5359407&ac.ad...
Audio: Accept the agreement. Download and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT...
If for some reason, the Intel HD graphics driver from that model does not work, then use this one...
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23713

Can not install windows 7 pro using boot camp as mouse and keyboard will not work Help please

I have a new iMac and trying to install Windows 7 Pro using boot camp. I have reached the stage of starting to load windows from the DVD then discovered the mouse and the keyboards not working so I could not interact with windows installation.

Open, if not so already, the Windows formatter. Identify the BC Windows partition. It will be the one listed with the proper size you created and/or will be labeled as a C: drive. Be careful you select the right one or you may be corrupting the entire drive.
Format the partition as NTFS.

Windows 7 64 bit and X-Fi XtremeGamer - Bass Redirection Not Working (No Subwoofer)

SWindows 7 64 bit and X-Fi XtremeGamer - Bass Redirection Not Working (No Subwoofer)% Greetings,
Today I ugraded to Windows 7 Ultimate 64 bit edition and am having a problem with my 5. surround sound that previously worked perfectly in Windows Vista Ultimate.
I am using an X-Fi XtremeGamer PCIe card and the problem is that I have full working surround sound, but the bass/ subwoofer isn't working.
Previously in Vista I enabled bass redirection in the Creative Console and this would make the subwoofer work. In Windows 7 in the console there is a bass redirection option but it doesn't work. Also in the Creative Audio Control panel there is NO option for bass redirection either.
Audio sounds tinny and I am 99.9% everything is set up correctley, I think this is a driver problem. At this moment I'm unsure if this issue plagues both the 32bit and 64bit versions of Windows 7 or just the 64bit version (since the console launcher is 32bit).
Anyone had a similar problem and cracked it's Apart from this small glitch Windows 7 is great!
Thanks!

WRe: Windows 7 64 bit and X-Fi XtremeGamer - Bass Redirection Not Working (No Subwoofer)h heya, I have exactly the same problem.
running 64-bit windows 7, X-Fi Xtreme Audio sound card, Trust 5. speakers.
the bass used to work in XP because I could enable bass redirection and alter crossover frequency.
these options are now no longer available in the windows 7 drivers (.4.90) and my bass is not working at all.
it is very annoying, there has been no comment from creative than i can find because it only appears to happen to a small percentage of speakers.
basically if someone from creative can't help fix the problem,?people with this problem?will unfortunately be forced to purchase a different brand of sound card because my speakers certainly aren't broken and work with the on-board sound fine.
so if anyone else has the same problem or any advice on how to fix the problem, please comment.

Cant seem to make photoshop default to open photos in Windows. Its defaulting to Adobe and I changed settings, still not working

When I upload photos from my phone to computer Cant seem to make photoshop default to open photos in Windows. Its defaulting to Adobe and I changed settings, still not working. Even when I press preview on photo and they open in windows photo viewer I cannot save the file to my computer. I have Photoshop CS4

infact both are same only..http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adapter "http://store.apple.com/us/product/MB570Z/B/mini-displayport-to-dvi-adapter"

Cableone innstalled a new server and now my thunderbird email will not work. What do I do now?

Cableone, our internet provider, has changed from a Google server to their own server and now my Thunderbird email will not work. They have directions listed to make it work, but this does not work. I have also contacted Cableone's technical support and they say because thunderbird is not their system they have no responsibility to make it work. I prefer to use Thunderbird for my email - how can I make it work? Also, I have tried the Thunderbird 'Automatic Account Configuration' help and it does not work.

Ask your less than helpful provider for the server settings and setup the new account up manually.
You want to know IMAP or POP and the name of the server. The port number and if it uses SSL/TLS security.
You need the same info for the SMTP server for outbound mail.

Windows 2003 migration to Server 2012 R2

Hi,
We have task to plan Windows 2003 Server migration to Windows Server 2012 R2. Since Server 2003 is running with domain services and file share for users.
We have to use the same hardware for installation with all required roles. Does anyone support if this physical Windows 2003 server can be migrate first on hyperV VM as to host temporary for user access on the other side physical server will be configured
with Windows 2012 server with all required roles and testing.
Mumtaz

Technically, you can often move a physical instance of Windows Server 2003 to a virtual instance. However, it is not the recommended path. If you have to keep it on 2003, it a better solution is to build a new VM running Windows Server 2003 and then
install the application. Performing a Physical to Virtual is not a guarantee that things will run correctly in the VM. The best solution is to get off 2003 ASAP.
Search TechNet for '2003 to 2012 migration'. Microsoft has provided a lot of information on how to migrate.
. : | : . : | : . tim

SCCM 2012 SP1 + WSUS + Server 2012 + SQL Server 2012

Hi all;
I installed SCCM 2012 with Sp1 for my site server and everything is going well.. And than i installed the WSUS role on my Windows Server 2012 and SCCM 2012 SP1 it gave an error message which is "Fatal Error: The schema version of the database is from a newer
version of WSUS than currently installed. You must either patch your WSUS server to at least that version or drop the database." My database server is SQL Server 2012... Do you know any pathc for WSUS or SQL Server 2012 doesnt support WSUS yet???
Thank You...
MCT

Normally if you are going to install SCCM 2012 SP1 +Windows 2012 with SQL 2012, Then you better use the SQL 2012 sp1.
also when you are installing the WSUS version 6.2 which come with server 2012 make sure you leave the default settings as it is. it shows in the below article.
also when you are giving the path to save the WSUS contents make sure the drive you going to create the wsus folder and the place where you going to download the updates is having free disk space and its formatted with the NTFS volume. Also the service account
you are using for this configuration should have the admin rights to the location of the wsus folder you going to create,
Thanks
Hasitha

Installing DPM 2012 SP1 onto Server 2012 R2 (Compatible / Supported)?

Hi,
Can DPM 2012 SP1 be installed onto Server 2012 R2? i.e. is it compatible and also is it supported by Microsoft?
If so are there any official documents or links provided by Microsoft for this installation scenario?
I would have installed DPM 2012 R2 onto Server 2012 R2 but this is not possible due to DPM 2012 R2 not supporting Server 2008 protected servers!
Thanks,
Microsoft Partner

Hi,
DPM 2012 SP1 is not supported running on Windows server 2012 R2.
System requirements for System Center 2012 SP1 - DPM
http://technet.microsoft.com/en-us/library/jj651645.aspx
Can you tell me how many Windows 2008 servers you need to protect and what is preventing you from upgrading them to Windows 2008 R2 ?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Windows 7 (Ent) Sp1 on server 2012 R2 HyperV, RFX USB redirection not working

Similar Messages

Maybe you are looking for