Windows 7 - error 7 - problem with installation - please reinstall

I keep getting this error after upgrading to Windows 7 and even after reinstalling new itunes and making sure I have .NET framework installed, it is not getting fixed.
Ashu

Good-O!
Although the 7 often indicates a problem with Apple Application Support, it can also be caused by one of the other associated pieces of software being incorrectly installed. (Every now and then I can replicate it by uninstalling QuickTime on my PC ... although an error 2 is also a possibility under those circumstances.)
So, we're going to try removing all of iTunes and its associated programs this time around, and then trying an iTunes reinstall. On a 32-bit Windows 7, the instructions in the following document should be adequate for that:
[Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7|http://support.apple.com/kb/HT1923]

Similar Messages

  • Lenovo S205 & Windows 7 64bit. Problems with graphics, please help

    Hi, 
    I recently bought a Lenovo s205:
    AMD E-350
    It came with 1GB but I upgraded it to 4Gb RAM (1333 running at 1066)
    Windows 7 64 Ultimate.
    I have tried also Windows 7 32 (Professional, ultimate) and all versions give me the same problem, I will explain here:
    I have tried in AHCI mode and IDE mode from the bios and done fresh installs of Windows. Still the same.
    After installing all the drivers, I get randomly in different programs "black" or sometimes "white" menus. Whenever I set the cursor on the menu (White or black part), the letters start showing up.
    On Firefox for example, it happened where you write the address (Ex: www..) And when searching images too.
    I have tried the original drivers that the Lenovo's website has for the S205 and the latest from Ati/AMD and nothing solves the problem.
    What can this be? Faulty ram? Faulty OS? Problem with the graphic card drivers?
    Please help, it is so frustrating. 
    Thank you so much. 

    Thank you very much for your help. 
    I will try capturing some screenshots if that helps.
    I can discard the problem with the ram at the moment. I have tried a new set of ram (two 2gb modules = 4gb in total). The problem persists, even when they are tried individually. I also tried the original ram module the Lenovo came with (1module of 1gb), alone. Problem persists too.
    However, I do not have a problem trying the VGA output. Will this help too? As I do not have any screen with HDMI at the moment. 
    What I will do too, is to try a Windows 7 from another disc, a Home version 32 bit. I hope this can get the problem fixed.
    The main issue is that I bought this computer from Germany (From a store on eBay) and came with DOS. I will have to return it to the seller, I assume, if the rest fails to show any improvements.
    Thank you for your reply and any more suggestions are welcome.

  • Trying to upgrade to 10.6 so my iPhone could synch...I'm getting this error message "Problem with this Windows (XP) Installer package.  A program required for this install to complete could not be run."  Any ideas?

    I had iTunes 10.2.1.1 but needed to upgrade to 10.6 so my iPhone could synch...I'm getting this error message "Problem with this Windows (XP) Installer package.  A program required for this install to complete could not be run."  Any ideas?

    This has been fixed.  Answer is that I needed to go to "Apple Software Update" and repair it.  (From my Control Panel).

  • Hey, I had met a problem with installation. Can any one help me?

    Hi everyone, I'm an user of Windows 7(64 bit),
    I had just download "Master Collection CS5.5"
    Everything are fine but Adobe Acrobat Professional can't install on my computer.
    There are the details..:
    Exit Code: 6
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 4 error(s), 1 warning(s)
    WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005}
    ----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
    ERROR: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
    ERROR: Install MSI payload failed with error: 1603 - 安裝時發生嚴重錯誤。
    MSI Error message: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Acrobat Professional: Install failed
    Thanks

    Re: Hey, I had met a problem with installation. Can any one help me?
    This worked for an English version and the concept should work with all Adobe programs - new or old (hopefully in any language). My guess is that you have/had an older version of Acrobat/Reader on your computer hard drive that needs to be *completely* removed first. Uninstall the new (and any old) Acrobat; then try using the "kb2..." guideline link below before reinstalling the new Acrobat. I am including the lengthy instructions in order to help others with more extensive installation problems. Good luck!
    I live on a fixed income and use CS for a hobby. I had problem installing Adobe Creative Suite (CS1) to Windows 7 64-bit Pro on my new computer. Also installed Adobe Photoshop LR3. What I learned: All Adobe products (Flash, Acrobat/Reader, Photoshop, Creative Suites, etc.) leave a VERY pervasive footprint on your hard drive. Logic finally worked for me.... think of building a house; there is an order you have to do things in. First, you have to clean the area before laying the foundation; then you have to build the framework before you put the roof on. You cannot install an older program over ANY newer program; and you will sometimes have a problem installing a newer program containing Flash, Reader, etc. unless you "erase" the older versions of Flash, Reader beforehand. If installing older programs, do a Custom/Manual install; do not install older versions of Flash, Reader, etc.  packaged with your Adobe software.
    SOLUTION (not easy, but it works):
    I first tried this; it did not solve my problem (but, if applicable, may help others).  http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Win dows
    Before doing anything, make document and any database/presets/cache back-ups beforehand (keep notes on their designated location*); manually create a System Restore point. (Be prepared to reinstall Windows if necessary - I didn't have to.)
    Completely and meticulously eradicate (clean) your hard drive of ALL Adobe programs [uninstall, remove remaining folders, and remove only the registry entries that have the Adobe name attached (unless you are an expert and fully understand the other entries)]. Use this as a guideline  http://kb2.adobe.com/cps/400/kb400769.html
    Do a Custom/Manual reinstall of all your Adobe products *in order of release dates* (OLDEST first).... do not include Reader, Flash, etc. If your CD will not automatically run at this point, click "Open folder to view files" (use Computer/Windows Explorer, if necessary). Click "Adobe Creative Suite (or your desired program) ==> Setup.exe" (IMPORTANT: Make sure that Reader, Flash, etc. are unchecked.)
    After each of your desired Adobe programs are installed, test to insure they boot up. Then download the latest Reader, Flash, etc. apps and install them (I did this in order of release date - oldest first). Do test boot(s) again.
    Copy/Paste your document and any database/presets/cache back-ups into the appropriate folders (*this will vary depending on your programs and your filing system).
    It has been four weeks and all my Adobe programs work flawlessly - system is stable, no problems!

  • Problems with Installer application

    Hi!
    Lately I've been having problems with Installer with several packages. Some pkgs install just fine, but others fail whenever they try to run some preflight or preinstall scripts.
    My mac is new MacBook Pro Core 2 Duo shipped with 10.4.8. I think these problems might have started after some late Security Updates.
    I've been doing maintenance tasks prediotically as well as repaired permissions and disk in single user mode. I've also tried to copy Installer from my Tiger install DVD's but with no luck.
    Either system.log, console.log nor CrashReports don't show anything. Installer's own log just announces that install failed while running presomething-scripts. But when I run these scripts manually from Terminal, they work just fine without any errors.
    I'm hopeless. I wish won't have to see the day coming when I'll have to do that so well known regular windows-like format and reinstall procedure with OS X. Sadly there's several packages I need to have installed, so if reinstall is the only solution please throw some backup and restore tips at me.
    With kind regards,
    Joona

    The first package I noticed this problem with was DivX for Mac installer. The Installer's log pointed that installation failed while running the preflight script. The script is pretty long, but mainly just removes older version of DivX libraries and applications and when I run it from the shell, it works just fine.
    I've also tried downloading it again along with another versions, but all the Installer fail at the same point. I've also tried to find some help to this problem from their forums, but it seems to me that I'm the only one having this problem.
    Another package which I found failing is Missing Sync for Windows Mobile. I just ordered HTC TyTN -phone and tried to get Missing Sync working. Missing Sync itself installs correctly, but there's a application which comes bundled with MS called Mark/Space Notebook. The installer is multipackage installer and during the installation of M/S Notebook it fails while running preinstall script. The preinstall script is really simple, like this:
    #!/bin/bash
    rm -rf "/Applications/Mark:Space Notebook.app"
    I haven't yet tried these packages on other Macs, but I'm positive they will work just fine. I believe that the problem must be either the Installer app, or something in my shell environment that makes it fail. Any ideas what could it be?
    When searching help from this forum first to this problem I ran into post that indicated the same problem and the fix for that was recreating admin/root account. Although I am pretty familiar with *BSD and UNIX systems, I didn't quite get what was meant by that. As far as I know the root account can't be easily recreated?

  • Problems with installation / de-installation of WAS AS 6.20

    Problems with installation / de-installation of WAS AS 6.20
    Hello,
    is anyone able to help me ?
    The installation (started from setup on cd-1 kernel) of sapdb ends by 30 % with following massage:
    start massage:
    Warning: adaextractlctool_nt_ada InternallnstallationDo
    SAPCAR returns with error 29.
    Error:  adaextractlctool_nt_ada InternallnstallationDo
    Phase failed.
    Error: Main {}
    Installation aborted.
    end massage.
    massage above percent-banner on the left down-side:
    no R3SETUP connected.
    In the dos-window in background have been a lot of status-lines during extraction of sabdb-files. Also there have been a successful-massage:
    "installation of sap db server finished successfully...." l.
    The massage above was shown direct after the massage: "Extracting SAP DB Tools Software"
    The Loop-back adapter is already installed (was the first ein did) and the files in win-folder 'hosts' and 'service' are correct (IP and so on)
    my system:
    Acer Aspire 5100
    Ram 1 GB
    HD 160 GB (140 GB frei)
    Win XP prof.
    How can I solve the installationproblem ?
    I think, I have to clean my system before starting a new installation-try, because there are already entries in my win-start-button:
    a) SAP DB Manager (but behind only a html-Link / no entry DeInstall)
    b) a second entry  SAP Front End (also behind just a html-link / no deinstall-button)
    Under system/controll panel -> software are no entries. So, I`m not able to deinstall the sapdb by win-controll-panel.
    And what is with registry-entries ? How can I delete the right entries in the registry. I dont know how to find them.
    Another way I tried: on the  SAP-CD 1 (kernel) with the file resume_setup.bat I get the same abort during installation I described at the top.
    Please, I need help, because I need the system as 6.20 for a trainning.
    Much thanks,
    Regards, Lars Stolpe
    MfG Stolpe

    obsolete question ...

  • Problem with installation and activation

    Hi, I have a problem with the installation of Adobe Muse.
    I had a free 30-days trial, when it was over I bought the product ($ 13 per month), 
    I installed the program again and I see the same window with the finished Trials
    and it requires a serial number and does not allow to enter the program.
    I installed the program on your PC wife without any problems, but I can not install it on a laptop.
    I have a laptop with Windows 8 operating system.
    What I've done:
    1. Uninstalled the free program,
    2. check the connection to the Internet,
    3. has installed a new program from the official website adobe.com,
    4. Remove the line for the activation of the hosts file and resave the file,
    5. turned off the brandmower,
    6. rebooted.
    I can't get support for a 3 days, is it the most terrible support I've ever seen? I dunno
    Please help me at [email protected]

    I guess this stuff helps me
    http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    2014-08-07 20:07 GMT+07:00 Дмитрий Броский <[email protected]>:
    thanx
    >
    2014-08-07 18:18 GMT+07:00 Prabhakar.Kumar <[email protected]>:
        problem with installation and activation  created by Prabhakar.Kumar
    >> <https://forums.adobe.com/people/Prabhakar.Kumar> in *Help with using
    >> Adobe Muse CC* - View the full discussion
    >> <https://forums.adobe.com/message/6619532#6619532>
    >>

  • ITunes will not up date get a messge saying problem with installer packge

    itunes will not up date get a message saying problem with installer packge

    TRy the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • Dreamweaver CS3. problem with installation

    Greetings...
    I have some strange problems with installation of Dreamweaver
    CS3: when I'm running setup -- it shows "initialization" window and
    then shows message that at one time I can install only one adobe
    produc. But there is no unfinished installations...
    Also this setup adds it's button to "Add or remove
    programs"...
    What should I do?
    Best regards...

    >I run the ADBEDRWVCSE_WWE.EXE 292.289 KB
    Where did you get this file?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "ABK54" <[email protected]> wrote in message
    news:fojl9t$e10$[email protected]..
    >I run the ADBEDRWVCSE_WWE.EXE 292.289 KB (for trial
    version of Dreamweaver
    >CS3)
    > and after I have try to run the Setup.exe file.
    > After 2 sec open a window - preparetion of Adobe
    Dreamweaver CS3 -
    > ,transer
    > some files and open a window Loading setup... in 2 sec
    close this window
    > and
    > after nothing!!!
    >
    > I need your help please
    > tks
    >
    >
    > sorry for the shuting
    >

  • Problem with installation of Adobe Air 2.6

    Hi,
    I've got a problem with installation of Adobe Air 2.6 under Mageia 2 Linux. The installation stops with an error. Here's the install.log:
    [Adobe AIR Application Installer:8550][ERR] Application Installer end with exit code 7
    [setup:11894][INFO] Runtime Installer begin with version 2.6.0.19170 on Linux x86
    [setup:11894][INFO] Commandline is:
    [setup:11894][INFO] No installed runtime detected
    [setup:11894][INFO] Relaunching with elevation
    [setup:11894][INFO] Launching subprocess with commandline /tmp/air.HmUPbw/setup -ei
    [setup:11894][ERR] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="/tmp/air.HmUPbw/build/opt/Adobe AIR/Versions/1.0/Resources/rpmbuilder error : symbol not found: parseSpec, /usr/lib/librpmbuild.so: undefined symbol: parseSpec error : + umask 022;+ cd /tmp/air.HmUPbw/build;+ '[' 1 -eq 1 ']';+ '[' 1 -eq 1 ']';+ '[' 1 -eq 1 ']';+ exit 0;+ umask 022;+ cd /tmp/air.HmUPbw/build;+ '[' /tmp/air.HmUPbw/build '!=' / ']';+ rm -rf /tmp/air.HmUPbw/build;++ dirname /tmp/air.HmUPbw/build;+ mkdir -p /tmp/air.HmUPbw;+ mkdir /tmp/air.HmUPbw/build;+ '[' 1 -eq 1 ']';+ true;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/opt/Adobe AIR;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/etc/opt/Adobe/certificates/AIR;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe;błąd: Nie odnaleziono pliku: /tmp/air.
    HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe/AIR;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe/AIR/Updater;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/etc/opt/Adobe/certificates/AIR/crypt/config.xml;    Nie odnaleziono pliku: /tmp/air.HmUPbw/build/opt/Adobe AIR;    Nie odnaleziono pliku: /tmp/air.HmUPbw/build/etc/opt/Adobe/certificates/AIR;    Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR;    Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared;    Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe;    Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe/AIR;    Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe/AIR/Updater;    Nie odnaleziono pliku: /tmp/air.HmUPbw/build/etc/opt/Adobe/certificates/AIR/crypt/config.xml" errorID=1]
    [setup:11894][ERR] Runtime Installer end with exit code 7
    How can I solve this problem? Thanks in advance for help.

    I'm not certain that Mageia 2 Linux is supported.  This Release Notes page and this Install Help page don't mention Mageia, just
    Fedora Core 12, Ubuntu 9.10, OpenSUSE 11.2.
    Roy

  • Error "DATABASE PROBLEMS WITH TABLE MC11VA0HDRSETUP"

    Hi Friends,
    I got the following message when am trying to delete the setup tables.
    " Error DATABASE PROBLEMS WITH TABLE MC11VA0HDRSETUP"
    Am trying to delete the setup tables for application '11', but it gives me the above error. I have gone throug similar threads but it did not solve my issue.
    Please can anyone provide a solution.
    system detials:
    R/3 release    - 4.6c
    PI                 - 2004_1_46c
    SAP_BW      - 30B
    PI_BASIS     - 2003_1_620
    Any information will be appreciated
    Thanks,
    VBR

    Hi Kishor,
    Thanks for your reply.
    I have gone through that SAP Note 456102 and it was not of much help for our issue because we are ahead of PI that is mentioned in the note.
    Can you send your email id so that i can forward the error screenshots.
    Regards,
    VBR

  • Problem with installation on PIV

    I have a problem with installation Oracle 9.0.1 database on my
    RedHat 7.1 and 7.2 dist.
    My machine is PIV 1.4/768MB/40Gb
    On PIII 933/786/40 everethin works fine.
    Where is solution for my problem ??

    Hello,
    PIV isn't problem on Linux. (I am tried)
    What is your problem ?
    regards
    peco

  • Problem with installation - Augigy

    I have a problem with installation on 32bit Vista. Im downloaded newest drivers (SB24_VTDRV_LB__04_0077) and when the installation start, i receive message "A higher version of driver is found in your system, installation will abort.".
    Help?

    same problem here, is there a possibility zu force installation?

  • I am not able to open iCloud from pc, error is "problem with the server". what should I do?

    I am not able to open iCloud from pc, error is "problem with the server". what should I do?

    Go to Settings>General>Restrictions>Accounts (near the bottom) and set this to Allow Changes.  You will then be able to access Settings>iCloud again.

  • Both xp and windows 7 have video problems with my VGA connection using TV

    both xp and windows 7 have video problems with my VGA connection using TV as my monitor when it gets to starting up windows no matter what version it will not I have let my mac on all night and still says starting windows or the windows 7 logo and nothing else will happen also when I use a 3rd patty software like peraills or other it works like a charm how to fix it?

    To map the drive on your computer click on Start - RUN - type "\\192.168.1.1" and click ok... When prompted for Username and Password type "admin" and click ok... Now you will be able to see the folder which you have shared on  your router, right click on it and select "Map network drive" and click on finish.
    Now it will map the drive on your computer and you should be able to transfer the file from your computer to the USB drive.

Maybe you are looking for