Windows 7, External DVD Drive. Won't load

Hey Guys,
I removed the DVD Drive from my MacBook Pro and shoved a 500GB Drive there because I replaced the original drive with a SSD Drive. I'm trying to install Windows 7 so I'm using an external USB Drive.
When I hold Option down at boot I get two CD's come up, One titled 'Windows' and the other titled 'EFI Boot'.
Windows does nothing, just flicks from an Apple to a Circle with a line through. EFI Boot appears to start booting, then stops after a few seconds on the 'Windows is loading Files' portion of the bootup.
Any ideas guys?
Thanks
Chris

If I may, I have a slight different situation in that I have two HDD installed rather than a single HDD and a SSD. I cannot seem to install Vista on a dedicated 500GB HDD (replacing the Superdrive, it's now external) using Boot Camp. I create the partition (the whole drive) and it wants to reboot for installation. When I do this, I only get to the white Apple logo screen where it also flashes a file gif with a ? in the middle of it; back and forth without accomplishing anything. I even removed the OSX drive so that only the 2nd drive was visible, but upon option boot, the drive isnt' recognized. What am I missing?

Similar Messages

External dvd drive won't work on USB macBook air

External dvd drive won't work on my macBook air usb port. It works on older versions of air and iMac.
Any ideas. Tried the left shift, control, option and power button sumultaniously, but did not work.

I know that no one has replied yet, but figured out the issue. I called Applecare and they couldn't figure it out, so sent me to a genuis at the Apple store. They too couldn't figure it out and told me that it was a firmware issue with the Toshiba dvd external drive. When I got home, I thought I would try one more thing. I hooked it up to a powered hub and it works perfectly. I'm not sure why no one else thought of it, but glad that I did.

Install Windows from external dvd drive?

ok.there is my problem.
I have a Mac Pro here.Last week the dvd driver stopped work and I do not have time to fix it now and I need urgently install the windows xp because need to use a specific app for windows.
Is it possible to install windows xp on bootcamp using a external dvd drive (usb).
thank you.

I have the exact same problem - my internal SuperDrive died and I'll be damned if I'm going to pay over $500 to get a new one. It appears to be utterly impossible to install Windows from an external DVD drive. At least it seems to be that way for me and my machine.
I've tried my drive connected with USB and with Firewire. I've tried rEFIt. I've tried booting with the Option/Alt key. My Mac seems unable (or unwilling) to do this.
I've found many many people with the same problem and only a very small handful that seem to eventually get it to work.
I've even tried to use the 30 day trial of VMFusion (which is not a long term solution because it doesn't use/mimic sufficient video drivers to support the games I want to play) to install Windows to the partition and I can't get that to work either. The Windows installer seems to refuse to install an older version of the system when the boot version has already been updated to a new one.
Does anyone out there have a way to reliably install Windows on a BootCamp partition?
Cheers,
Fusilier

External Hard Drive won't load, Disk Utility and System Profiler crashes,

I've had the WD 1TB Passport for Mac for about a year now and as of this afternoon, my MacBook Pro stopped recognizing it. It's encrypted so when I plugged it in, my computer asked me for my password, but then it said there was an error and wouldn't mount. After restarting the computer, the password prompt for my external drive didn't even pop up. I can hear the hard drive spinning and the light flashes for a good 30 seconds before going solid. I have tested my USB ports with flash drives and they are reading them just fine. I tried to run Disk Utility but it goes into the never-ending loading mode. So then I go to the "About my Mac" page and clicked on storage, and the profiler crashed (never-ending loading). Can anyone help me? It was working just fine up until today. I even tried different Micro USB chords on it. This drive is incredibly important to me and I would appreciate not having to erase anything from it (kinda defeats the purpose of backing up a computer if the external hard drive is the one needing the backup).
I have a
Mid 2010 13in MacBook Pro
OS X 10.8.2
1TB WD Passport for Mac

Solution may be found if you search in the "More Like This" section over in the right column.

Mac Pro DVD drive won't load some software discs

I just bought two sets of Photoshop Elements, and my 2007 Mac Pro failed to recognize all six DVDs. I'm realizing I've had this problem with a few software discs in recent years, including some Final Cut Studio install discs. CDs and regular DVDs work fine - just some software DVDs are eventually ejected by the computer without showing up on the desktop. I have tried cleaning the drive with a disc cleaner.
My way around it has been to put these discs in my PC, make a copy, and then these copies load fine in my Mac. But it's a nuisance, and my PC won't be around forever.
Can anyone suggest what the problem might be? Or a decent external drive (Blu-ray?) that I might want to replace it with?
Thanks.

I'll try that tomorrow. Thinking it could also be:
1) The PRAMM battery. found info on that they can wear out close to 5 years. This MAC PRO is close to that now. And I use a lot of power on it.
2) MAC PRO is plugged into a SURGE PROTECTOR, instead of right into the wall outlet.
3) Been doing a lot of FORCE QUITS and HARD BOOT -- unplugging it directly when it wouldn't shut down soon enough -- lately this past year.
I just assumed that this MAC PRO with the XEON QUAD CORE etc., was a heavy duty enough NLE,
that i wouldn't have these problems. It's not fully loaded with all the chips it can carry...and I don't have near enough external terabyte hard drives for storing video and audio files to edit. I've been storing wayyy too much
on the internal hard dives and just have to stop that.
I noticed these past few days that much of the LETTERING for hard drive icons and folders' titles
were starting to look in OVERLAPPING of the lettering. That was my first hint that something was up.

CD/DVD drive won't load disks...is it dead?

The HL-DT-ST DVDRW GA11N drive had always worked with no problem. There was a CD I left in it (without playing) for a couple of months, and when I tried to eject it, the drive kept trying but it would not eject - - a tiny bit of the edge would peek out momentarily, but then it would get sucked right back in, after which the drive would spin up and the disc would reappear in the Finder. After repeated attempts to eject it (including using Finder, iTunes, and Terminal, and restarting the iMac), I was finally able to grab hold of the tiny bit that showed on one eject attempt and forcibly pull it out. That may have been a mistake.
Now, attempting to insert another disk results in absolutely no reaction. It will not trigger whatever is supposed to sense a disc is trying to be inserted. Is the drive dead? Am I pretty much screwed and left with no choice but to hook up an external drive or take my iMac to the Apple Store (where it is out of warranty, of course). I cannot find any way to test or check the status of the disc drive in the built-in disc diagnostics.

I don't really see how that could be the problem -- a) because it was the latest TurboTax disc I was trying to load, which should be compatible with everything, and b) how could the drive possibly know what kind of disc it is if trying to insert the disc doesn't even activate the loading process?
The disc that wouldn't come out was somebody's privately made audio CD, so yes, that could have been a problem (though it didn't have a paper label). But the problem now is that no matter what disc I attempt to insert, I push it in to the point where it meets resistance and nothing at all happens.

External dvd drive won't work w/ iMac (10.5.8)

Just bought a new LaCie dvd rw w/ lightscribe. When I plug it into my iMac, the system profiler "sees" it through the firewire connection, but any disk I put into it won't mount. I plugged it in to my daughters PC & it was instantly recognized & disks were readable. Do I need a special driver or patch? I downloaded everything on the LaCie website w/ no luck. Thanks!

What OS version are you on? Normally you don't need anything (especially not a driver), but I remember from 10.5 that I had to download the disc recording support:
http://www.lacie.com/us/support/support_manifest.htm?id=10340
even though laCie insisted I didn't need it and that it was for earlier OS's, I downloaded and installed it and it worked in 10.5 (probably not in 10.6, most likely not in 10.7).
Also, depending on the options you have checked for showing/not showing CD/DVD on desktop, you may not see it - check Finder Preferences and iTunes as well.

Boot Windows AND FreeBSD from my MacBook Pro 8,3 using an external DVD drive. I'm considering to remove my DVD-ROM and replace it with an SSD drive. That doesn't seem to work. Why not?

As the title says, I'm attempting to boot off my favorite operating systems, Mac OS X, Windows 7 and FreeBSD from an external DVD drive. However, for some odd reasons, booting the Windows DVD and FreeBSD 9.1 install DVD from the external drive does not seem to work. I was able to create a bootable USB with the Windows installer, but whenever I attempt to do the same with FreeBSD, I only get an error message that says "No bootable device -- press any key to restart." Is this a limitation that Apple deliborately created? If so, why won't Apple let its customers do whatever they please with their computers, considering that customers who want to change the hardware and/or operating systems knows what he is doing, without having to worry about some silly Apple limitations?
If I sound rude, I apologize for that, as no impoliteness is intended from my side.
In advance, thanks. Have a wonderful day, everyone.

That is only partially correct at best.
When you are booting off Windows or any other operating systems that usually don't support EFI (including Windows), your Mac uses something called CSM-BIOS. And as long as that CSM-BIOS implementation on EFI-based Mac do not support booting off from USB (note that Mac OS X Installer works fine when booting from USB), not even a USB Apple SuperDrive which once was an internal drive, there mot definately is something for Apple to fix.
When attempting to install Windows via BootCamp, a somewhat hybrid GTP/MBR table is created. When you boot off the installer disc of the OS you intend to install (i.e. Windows 7, FreeBSD, etc), your Mac might not support the EFI boot option (at least my 2011 17-inch MacBook Pro doesn't support that), so the only way of booting that second OS installer is via the regular BIOS, which Apple's EFI based systems implement as CSM-BIOS.

Panther to Tiger DVD won't restart on external DVD drive, G4 tower!

I purchased the DVD Tiger upgrade last year! My tower does not have a dvd drive so I finally purchased an external LG Super drive to upgrade my system from 10.3 to Tiger. It plugs in into a USB Port with an additional USB port when you need extra power(don't know if this is the problem it also will not burn a dvd, using toast lite, but will load one). The dvd loads and is visual on my screen but it will not get past the restart screen. Says it can not retart using the dvd drive. I have attempted to hold down the "c" key, the control key and change the start up disk option in the preferences to the 10.5 system which is visual in my start up screen as well as my 10.3 system. Processor speed and ram should be fine according to Apple when I purchased it. Nothing works!
(error message)attempts to install the 10.4 OS results in a msg "you cannot install Mac OSX on this volume. Mac OSX cannot start up from this volume."
Any advise is welcome.

Welcome to Apple Discussions!
There are reasons why Mac OS X won't install on your volume:
1. If you are using a PCI PowerMac G4, versus an AGP PowerMac G4, it won't support an external DVD drive for booting via Firewire. See this article to determine if that's the case:
http://support.apple.com/kb/HT3082?viewlocale=en_US
2. If you are using an Update or DropIn labelled DVD. These can only be used on PowerMac G5s, iMac G4s, Powerbook G4s, iBook G4s, that were released between April 6th 2005, and April 29th, 2005.
Your profile says you are using a PowerMac G4, so we can only assume you are not using one of the above models which can use the disc.
3. If you are using a gray disc that is labeled some other Mac model than one of the above models, those will not work with a PowerMac G4.
4. If your disc looks like * and does not say Update, DropIn, or OEM on it, try using the startup manager instead to boot the disc:
http://support.apple.com/kb/TA27043?viewlocale=en_US
Select the disc instead of following step 3 in the above article:
3. Click the Apple Hardware Test volume in the startup manager.
and continue to follow the steps. Sometimes the 'C' key doesn't work.
5. You don't have at least 256 MB of RAM installed. See my FAQ*:
http://www.macmaps.com/badram.html
P.S. It appears you didn't read the header of this forum. We'll ask a moderator to move this post for you.
If your question concerns a hardware or software technical issue, please do not post in this forum — instead, go to the Apple Discussions Homepage, select an appropriate product category and follow the links until you reach the correct forum for your post, then click the Post New Topic link
- * Links to my pages may give me compensation.
Message was edited by: a brody
Message was edited by: a brody

Installing Windows 7 from external DVD drive

I removed the internal DVD drive and replaced it with an OCW SSD on my 15" MBP. I used Disk Utility to format it to MS-DOS(FAT). I bought Windows 7 and downloaded the .iso file from the website. I used Disk Utility to burn the .iso image onto the disk. Since BootCamp won't recognize my external DVD drive I installed rEFIt, so after I restarted twice it came up with a prompt to boot from Windows install CD. I click the the icon, the screen goes black, and then the DVD drive stops spooling and I have to hold the power button down to restart it normally. What way is there to install WIndows 7 from an external DVD drive?

Maybe use Winclone (Mac app)? Others here know more about using Winclone than I do.
I use Casper (Windows app) for cloning an internal Windows partition to an external drive, so a Casper restore would be just the opposite, but requires a CD drive which you are now lacking.

Installing Windows XP on Lion using external DVD drive

Hi, this is my first time posting on a forum at all, so just keep that in mind when dealing with me.
I have recently attempted to install Windows XP by partitioning my drive using the disk utility (seeing as Bootcamp no longer supports Windows XP installations). The problems start when I boot from the installation disk; an error "no bootable device - insert boot disk and press any key" occurs. I am inclined to believe that this is due to me using an external DVD drive when doing all of this. I am using an external DVD drive because my internal DVD drive has been spoilt and is no longer useable.
Does anyone have a solution for me? It seems that it is not possible to install windows using an external DVD drive.

I am doing this after doing a full wipe of my hard drive and reinstalling lion.
Previously, I had lion, and made a partition using disk utility and booted from the disk (this time it was from my Mac's SuperDrive which was functioning perfectly at this point in time) and finished the installation completely fine. I then used the drivers that were in my Snow Leopard DVD (I have a Snow Leopard DVD from a previous Mac I purchased).
The only difference between then and now is that I am using an external DVD drive.

Installing Tiger with external DVD drive, why won't it work??

I have been trying to install OS X 10.4.3 from the DVD disk, last time I upgrade the OS I had to go out and buy an external DVD drive because I only have a cd drive in my mac. This worked fine last time but now I'm upgrading again it just won't work.
I can not get the mac to boot from the DVD, it sees it's there, I've tried holding down c, the alt key, the option key, choosing the DVD as the start up disk and checking the firmware, nothing will work!
I have read other questions of the same nature but I don't seem to have found an answer.
Can anyone help me, please??
Ruth
imac Power PC G3 Mac OS X (10.3.9)

I'm having the same problem. My mom has a Quicksilver G4 – four years old, but plenty to run Tiger. The only thing is we didn't get the built in DVD player. We got an external firewire DVD but can't get the machine to boot from the disk in the external drive.
If I try to run the installer I get a (-2) error that Startup Disk can't make the selected drive the boot drive. If I go into Startup I can select the DVD, but upon actual start up it can't find it and I eventually get the folder with the question mark. Holding down option doesn't bring it up in the list and holding down c does absolutely nothing.
Anybody else?

Installing Windows 7 on Parallels with external DVD Drive

Hi. I have a Mac Mini, and just finished installing Parallels 8. I am now trying to install Windows 7, but they system is not recognizing my external DVD drive. I get a message telling me to install from an image file? Not sure what that means. Help! Thx.

I am doing this after doing a full wipe of my hard drive and reinstalling lion.
Previously, I had lion, and made a partition using disk utility and booted from the disk (this time it was from my Mac's SuperDrive which was functioning perfectly at this point in time) and finished the installation completely fine. I then used the drivers that were in my Snow Leopard DVD (I have a Snow Leopard DVD from a previous Mac I purchased).
The only difference between then and now is that I am using an external DVD drive.

Install Windows 8 on macbook pro with external dvd drive

My superdrive have broken, anyone have experience installing windows 8 on macbook pro with external dvd drive?
Last night, I tried but end of with black screen.

Bguzryanto wrote:
the main point is 'anyone have exprerince install windows 8 with external dvd drive on macbook pro'
Purchase new superdrive, takes 2-3 weeks for shipping at my city.
It can't be done. If your computer has an internal optical drive, working or not, that is the drive you must use. Only computers such as the Macbook Pro Retina/Macbook Air that have no internal optical drive can install Windows from an external drive.

External DVD drive compatible with Windows 8

I am looking to purchase an external DVD drive to use with the U430 laptop which is running Windows 8. Which units does lenovo offer that can run in this OS? Would the 0A33988 work; the specs only list Windows 7. I don't think the DB60 will work in Windows 8.
Thanks
joe

I recently ran into that problem. In order to have the hard drive compatible for both PC and Mac it must be in a FAT32 format. In order to do this though all your files will be deleted (in order to reformat). You can do this by plugging in the hard drive into you mac and going under disk utility and there you will find your hard drive and under erase change the format to FAT32 and then you press erase (all will be deleted off the external drive though)

Windows 7, External DVD Drive. Won't load

Similar Messages

Maybe you are looking for