Windows 7 - Files missing from network share after trying to burn and no data cached to be burned

I ran into an issue trying to burn some file from a network share using Windows 7 Home Professional. I was trying to burn some .jpg files from a mapped network share drive using explorer. Every time I would drag the files to be burned from
the share drive to the explorer screen to be burned, the files would disappear from the share. To make things worse the files would not show up in the screen to be burned. I was unable to locate any of the files on either of the systems when performing
a search after this took place. I verified that the steps that I was taking to burn the files were the same as outlined on the Microsoft site. No matter what I did to burn these files, they were deleted from the mapped network drive.
Below are the steps that I took that both resulted in the files being deleted as well as what I had to do to finally burn the disc.
Steps that resulted in files being deleted:
1. Insert blank CD into drive.
2. From prompt select burn using explorer (Mastered Format)
3. Enter title and select with CD/DVD, click Next.
4. Open a second explorer window, navigate to mapped network drive with files to be burned and snap next to explorer to be burned.
5. Drag and drop the files from the share drive to CD.
This where the train would fall off the tracks every time. I would receive a message that the file(s) no longer exist and if I wanted to continue. From here the files would be deleted from the share drive. The best part is that the files
would also NOT be locally stored to be burned.
Steps to burn share files WITHOUT delete:
Follow steps outlined above, but instead of just dragging and dropping the files as outlined in step 5 select the files from the network share location, right mouse select copy. Then right mouse select paste in the explorer window to be burned.
I have tested this many times and every time ended up with the same problem. At this point I am sure that there is a problem with the way that Windows 7 is performing the burn. The system that I was using to burn is Windows 7 Home Professional
with all the patches and updates loaded. The remote system is Windows XP Professional with all the patches and updates loaded.
Thanks in advance

Yes, the problem is still continuing. However, after looking into as much of it as I can, I can confirm something that r.p.b_ started stumbling on. The files are deleted IF AND ONLY IF a user is using the built-in Windows 7 disc burning utility AND is dragging
and dropping the files to the drive from a network share; this doesn't happen locally. If you watch what happens in the native folder, the files are literally scrubbed from the drive as they are processed and added to the image. However, if you Right Click
on the files and copy them, then Right Click->Paste onto the drive, they remain. (The keyboard shortcuts also worked.) Also, 3rd party disc burning utilities function they way the should. (In other words, they don't delete the files.)
My speculation is that there's a bug in the coding that sees the network share as a temporary buffer file while the image is being prepared. Then, as the files are processed in what ever way is needed, the "temporary buffer" is being deleted. The result:
lost files on a network share. But, this is just speculation.

Similar Messages

Adobe files missing from network drive after editing...

Problem started around June 1st. PDF files are shared on the network drive. After I edit one of the forms and resave it, the networked computers can no longer see the file listed on the network drive. Only the hosting computer still sees them. Also, if I resave one of the files as a new name, it will reappear on the network. Any ideas? Adobe Reader 11.0.03

Yes, the problem is still continuing. However, after looking into as much of it as I can, I can confirm something that r.p.b_ started stumbling on. The files are deleted IF AND ONLY IF a user is using the built-in Windows 7 disc burning utility AND is dragging
and dropping the files to the drive from a network share; this doesn't happen locally. If you watch what happens in the native folder, the files are literally scrubbed from the drive as they are processed and added to the image. However, if you Right Click
on the files and copy them, then Right Click->Paste onto the drive, they remain. (The keyboard shortcuts also worked.) Also, 3rd party disc burning utilities function they way the should. (In other words, they don't delete the files.)
My speculation is that there's a bug in the coding that sees the network share as a temporary buffer file while the image is being prepared. Then, as the files are processed in what ever way is needed, the "temporary buffer" is being deleted. The result:
lost files on a network share. But, this is just speculation.

I installed the system update to 10.7.3. After re-booting, my mail file was missing from the dock. Looked in applications and the mail application is missing. Any thoughts?

I installed the system update to 10.7.3. After re-booting, my mail file was missing from the dock. Looked in applications and the mail application is missing. Any thoughts?

Thanks Paul; but, taking your suggestion didn't solve the problem. As mail is part of the OS, the updates don't have the capacity to reinstall applications; so, I had to reinstall the OS. I now have my mail back (although it didn't appear on the dock--I had to go to applications and activate it and then put it back in the dock. Thanks again for trying.

Why is the "Send to iDVD" command missing from the share menu in iPhoto 9.4.3 when trying to send a slideshow to iDVD?

How come the "Send to iDVD" command is missing from the share menu? In iPhoto I used to be able to send my slideshows to iDVD simply my clicking on the slideshow, selecting the "Share" menu at the top and going to "Send to iDVD". Now in iPhoto 9.4.3 that option is missing.
Further i am also using iDVD 7.1.2 and running OSX version 10.8.3.
Thanks!

Export the slideshow via the Export button at the bottom of the slideshow window with Size = Medium or Large.
Open iDVD, choose a theme and drag the exported movie file to the menu window being careful to avoid any drop zones.
Follow this workflow to help ensure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Can't open Office documents from network share

Dear,
I have a user named X that can't open Office documents from two specific shares. We call this shares T and U.
When the user X opens Office documents the error message is "...xlsx can't be opened". The problem is not client specific because when I login on the same client I can open the documents without any problem. If you copy the file to your desktop it
opens fine.
Any idea?

Anybody?
We have a problem with a customer that they can't open Office documents(Word,Excel etc.) on Windows 8 image on a network share. The error message is just that they can't open the document. The documents are on a sharepoint site and we can open the documents
within the site and also we can open the Office documents on a Windows 7 image.
I think there is a group policy for Windows 8 for this but I don't know for sure?
Anybody?

Unattend Hit an error while pulling drivers from Network Share

Hi All,
I've run into an error with installing apps from network share via SynchronousCommands under Specialize pass in unattended answer file. I been trying to work on it since yesterday and haven't had any success so far. It keeps failing with an error below.
This error is from setupact.log file and I've just pasted only the error from the file .
synchronously
2014-09-27 06:31:20, Info                         [SETUPUGC.EXE] Process returned with exit code 0x0
2014-09-27 06:31:45, Error                        [SETUPUGC.EXE] Hit an error (hr = 0x80070056) while running [\\WDS-DEP-SERV\E\Distribution\Drivers\setup64.exe
/s ]
2014-09-27 06:31:45, Info       [0x090009] PANTHR CBlackboard::Close: c:\windows\panther\commandexec\commandexec.
2014-09-27 06:31:45, Info                         [SETUPUGC.EXE] SetupUGC returning with exit code [4]
This error is from setuperr.log.
2014-09-27 06:31:45, Error                        [SETUPUGC.EXE] Hit an error (hr = 0x80070056) while running [\\WDS-DEP-SERV\E\Distribution\Drivers\setup64.exe
/s ]
Let me explain this situation. I've a server named WDS-DEP-SERV which is running my WDS, DHCP and DNS. I've an E drive on this server which contains setup64.exe and I'm trying to have the client pull that .exe via unattend answer file and install it either
during Specialize pass under windows deployment services via Synchronoouscommands or under OOBE pass under Windows Shell setup via FirstLogoncommands ---> Synchronouscommands, but it's not working. I believe that my path format for network share is wrong.
I've searched online almost everywhere since yesterday but I couldn't find anything.
Can anyone please let me know what's the right way of go about doing it? This is the only thing that's not working for me. Below is my answer file, in case someone needs to see what I'm doing wrong.
Thanks and hope to hear from someone.
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="specialize">
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <ComputerName>WIN-8-DEPL</ComputerName>
            <ProductKey>MHF9N-XY6XB-WVXMC-BTDCT-MKKG7</ProductKey>
            <RegisteredOrganization>Microsoft</RegisteredOrganization>
            <RegisteredOwner>AutoBVT</RegisteredOwner>
            <ShowWindowsLive>false</ShowWindowsLive>
            <TimeZone>eastern standard time</TimeZone>
            <CopyProfile>true</CopyProfile>
            <BluetoothTaskbarIconEnabled>false</BluetoothTaskbarIconEnabled>
        </component>
        <component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <RunSynchronous>
                <RunSynchronousCommand wcm:action="add">
                    <Order>1</Order>
                    <Path>net user administrator /active:no</Path>
                    <Description>Enabling Built in Administrator Account</Description>
                    <WillReboot>Never</WillReboot>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Description>DisableNetworkLocationPrompt</Description>
                    <Order>2</Order>
                    <Path>REG ADD "HKLM\SOFTWARE\Policies\Microsoft\Windows NT\CurrentVersion\NetworkList\Signatures\FirstNetwork" /v Category
/t REG_DWORD /d 00000000 /f</Path>
                    <WillReboot>Never</WillReboot>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Path>REG ADD "HKLM\System\CurrentControlSet\Services\Tcpip6\parameters" /v DisabledComponents /t REG_DWORD /d 0xFF /f</Path>
                    <Order>4</Order>
                    <Description>Diasbling IPV6</Description>
                    <WillReboot>Never</WillReboot>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Credentials>
                        <Domain>Mikasa.local</Domain>
                        <Password>Administrator</Password>
                        <Username>Ghtwhts2015</Username>
                    </Credentials>
                    <Path>\\WDS-DEP-SERV\E\Distribution\Drivers\setup64.exe /s </Path>
                    <Description>Vmware Tool Installation</Description>
                    <Order>3</Order>
                    <WillReboot>Always</WillReboot>
                </RunSynchronousCommand>
            </RunSynchronous>
        </component>
        <component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SearchScopes>
                <Scope wcm:action="add">
                    <ScopeDefault>true</ScopeDefault>
                    <ScopeDisplayName>Google</ScopeDisplayName>
                    <ScopeKey>Google</ScopeKey>
                    <SuggestionsURL>http://www.google.com/search?q={search Terms}</SuggestionsURL>
                    <ShowSearchSuggestions>true</ShowSearchSuggestions>
                    <ShowTopResult>true</ShowTopResult>
                </Scope>
            </SearchScopes>
            <DisableAccelerators>true</DisableAccelerators>
            <DisableFirstRunWizard>true</DisableFirstRunWizard>
            <Home_Page>www.marca.com</Home_Page>
            <BlockPopups>yes</BlockPopups>
        </component>
        <component name="Microsoft-Windows-TerminalServices-LocalSessionManager" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <fDenyTSConnections>false</fDenyTSConnections>
        </component>
        <component name="Networking-MPSSVC-Svc" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <FirewallGroups>
                <FirewallGroup wcm:action="add" wcm:keyValue="Remote Desktop">
                    <Active>true</Active>
                    <Group>Remote Desktop</Group>
                    <Profile>all</Profile>
                </FirewallGroup>
            </FirewallGroups>
        </component>
        <component name="Microsoft-Windows-TerminalServices-RDP-WinStationExtensions" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <UserAuthentication>0</UserAuthentication>
            <SecurityLayer>1</SecurityLayer>
        </component>
        <component name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SkipAutoActivation>true</SkipAutoActivation>
        </component>
        <component name="Microsoft-Windows-TCPIP" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <Interfaces>
                <Interface wcm:action="add">
                    <Identifier>00-50-56-30-85-87</Identifier>
                    <Ipv4Settings>
                        <DhcpEnabled>false</DhcpEnabled>
                        <Metric>10</Metric>
                        <RouterDiscoveryEnabled>false</RouterDiscoveryEnabled>
                    </Ipv4Settings>
                    <UnicastIpAddresses>
                        <IpAddress wcm:action="add" wcm:keyValue="1">172.16.5.21/24</IpAddress>
                    </UnicastIpAddresses>
                    <Routes>
                        <Route wcm:action="add">
                            <Identifier>0</Identifier>
                            <Prefix>0.0.0.0/0</Prefix>
                            <Metric>10</Metric>
                            <NextHopAddress>172.16.5.1</NextHopAddress>
                        </Route>
                    </Routes>
                </Interface>
            </Interfaces>
        </component>
    </settings>
    <settings pass="oobeSystem">
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <AutoLogon>
                <Password>
                    <Value>RwBoAHQAdwBoAHQAcwAyADAAMQA2AFAAYQBzAHMAdwBvAHIAZAA=</Value>
                    <PlainText>false</PlainText>
                </Password>
                <Enabled>true</Enabled>
                <LogonCount>10</LogonCount>
                <Username>DarkKnight</Username>
                <Domain></Domain>
            </AutoLogon>
            <OOBE>
                <HideEULAPage>true</HideEULAPage>
                <NetworkLocation>Home</NetworkLocation>
                <ProtectYourPC>1</ProtectYourPC>
                <HideOEMRegistrationScreen>true</HideOEMRegistrationScreen>
                <HideWirelessSetupInOOBE>false</HideWirelessSetupInOOBE>
            </OOBE>
            <UserAccounts>
                <AdministratorPassword>
                    <Value>RwBoAHQAdwBoAHQAcwAyADAAMQA2AEEAZABtAGkAbgBpAHMAdAByAGEAdABvAHIAUABhAHMAcwB3AG8AcgBkAA==</Value>
                    <PlainText>false</PlainText>
                </AdministratorPassword>
                <LocalAccounts>
                    <LocalAccount wcm:action="add">
                        <Password>
                            <Value>RwBoAHQAdwBoAHQAcwAyADAAMQA2AFAAYQBzAHMAdwBvAHIAZAA=</Value>
                            <PlainText>false</PlainText>
                        </Password>
                        <Description>Admin User Account</Description>
                        <DisplayName>Omar</DisplayName>
                        <Group>Administrators</Group>
                        <Name>Omar</Name>
                    </LocalAccount>
                </LocalAccounts>
            </UserAccounts>
            <RegisteredOrganization>Mikasa</RegisteredOrganization>
            <RegisteredOwner>Mikasa</RegisteredOwner>
            <ShowWindowsLive>false</ShowWindowsLive>
            <TimeZone>eastern standard time</TimeZone>
        </component>
        <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <InputLocale>en-US</InputLocale>
            <SystemLocale>en-US</SystemLocale>
            <UILanguage>en-US</UILanguage>
            <UserLocale>en-US</UserLocale>
            <UILanguageFallback></UILanguageFallback>
        </component>
    </settings>
    <settings pass="generalize">
        <component name="Microsoft-Windows-Security-SPP" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SkipRearm>1</SkipRearm>
        </component>
    </settings>
    <settings pass="offlineServicing">
        <component name="Microsoft-Windows-LUA-Settings" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <EnableLUA>false</EnableLUA>
        </component>
    </settings>
    <cpi:offlineImage cpi:source="wim:e:/windows-os-images/win8.1x86ent-wimfiles/install.wim#Windows 8.1 Enterprise" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>

Hi,
Thanks for replying with your input. I'll go over that and make changes. Can you please help me out with the following as I can't figure this out why my script on the network share run and execute during unattend install?
My script on my network share failed to run during unattend install right before the first login.
Can someone take a look at my unattend xml file
and suggest me a solution? I've highlighted the script paramters in bold. I've also attached my error message with this. Please check it out and make some suggestions. Thanks
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="specialize">
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35"
language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <ComputerName>WIN-8-DEPL</ComputerName>
            <ProductKey>MHF9N-XY6XB-WVXMC-BTDCT-MKKG7</ProductKey>
            <RegisteredOrganization>Microsoft</RegisteredOrganization>
            <RegisteredOwner>Microsoft</RegisteredOwner>
            <ShowWindowsLive>false</ShowWindowsLive>
            <TimeZone>eastern standard time</TimeZone>
            <CopyProfile>true</CopyProfile>
            <BluetoothTaskbarIconEnabled>false</BluetoothTaskbarIconEnabled>
        </component>
        <component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <RunSynchronous>
<RunSynchronousCommand wcm:action="add">
<Order>1</Order>
                    <Path>net user administrator /active:no</Path>
                    <Description>Enabling Built in Administrator Account</Description>
<WillReboot>Never</WillReboot>
                </RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Description>DisableNetworkLocationPrompt</Description>
                    <Order>2</Order>
<Path>REG ADD "HKLM\SOFTWARE\Policies\Microsoft\Windows NT\CurrentVersion\NetworkList\Signatures\FirstNetwork"
/v Category /t REG_DWORD /d
00000000 /f</Path>
                    <WillReboot>Never</WillReboot>
</RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Path>REG ADD HKLM\System\CurrentControlSet\Services\Tcpip6\parameters /v
DisabledComponents /t REG_DWORD
/d 0xFF /f</Path>
                    <Order>3</Order>
<Description>Diasbling IPV6</Description>
                    <WillReboot>Never</WillReboot>
</RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Credentials>
                        <Domain>Mikasa.local</Domain>
<Password>Ghtwhts2015</Password>
                        <Username>Administrator</Username>
</Credentials>
                    <Path>\\WDS-DEP-SERV\E\Distribution\Drivers\setup64.exe /s
/v "/qn REBOOT=ReallySuppress" /l C:\Windows\Temp\vmware_tools_install.log</Path>
                    <Order>4</Order>
<Description>Vmware
Tools Installation</Description>
                    <WillReboot>Always</WillReboot>
</RunSynchronousCommand>
            </RunSynchronous>
        </component>
        <component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <DisableAccelerators>true</DisableAccelerators>
            <DisableFirstRunWizard>true</DisableFirstRunWizard>
            <Home_Page>www.marca.com</Home_Page>
            <BlockPopups>yes</BlockPopups>
        </component>
        <component name="Microsoft-Windows-TerminalServices-LocalSessionManager" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <fDenyTSConnections>false</fDenyTSConnections>
        </component>
        <component name="Networking-MPSSVC-Svc" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35"
language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <FirewallGroups>
<FirewallGroup wcm:action="add" wcm:keyValue="Remote Desktop">
<Active>true</Active>
                    <Group>Remote Desktop</Group>
<Profile>all</Profile>
                </FirewallGroup>
            </FirewallGroups>
        </component>
        <component name="Microsoft-Windows-TerminalServices-RDP-WinStationExtensions" processorArchitecture="amd64"
publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <UserAuthentication>0</UserAuthentication>
            <SecurityLayer>1</SecurityLayer>
        </component>
        <component name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SkipAutoActivation>true</SkipAutoActivation>
        </component>
    </settings>
    <settings pass="oobeSystem">
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <AutoLogon>
<Password>
<Value>RwBoAHQAdwBoAHQAcwAyADAAMQA2AFAAYQBzAHMAdwBvAHIAZAA=</Value>
<PlainText>false</PlainText>
                </Password>
<Enabled>true</Enabled>
                <LogonCount>10</LogonCount>
<Username>DarkKnight</Username>
                <Domain></Domain>
            </AutoLogon>
            <OOBE>
                <HideEULAPage>true</HideEULAPage>
<NetworkLocation>Home</NetworkLocation>
                <ProtectYourPC>1</ProtectYourPC>
<HideOEMRegistrationScreen>true</HideOEMRegistrationScreen>
                <HideWirelessSetupInOOBE>false</HideWirelessSetupInOOBE>
            </OOBE>
            <UserAccounts>
                <AdministratorPassword>
                    <Value>RwBoAHQAdwBoAHQAcwAyADAAMQA2AEEAZABtAGkAbgBpAHMAdAByAGEAdABvAHIAUABhAHMAcwB3AG8AcgBkAA==</Value>
<PlainText>false</PlainText>
                </AdministratorPassword>
<LocalAccounts>
<LocalAccount wcm:action="add">
<Password>
<Value>RwBoAHQAdwBoAHQAcwAyADAAMQA2AFAAYQBzAHMAdwBvAHIAZAA=</Value>
<PlainText>false</PlainText>
                        </Password>
<Description>Admin
User Account</Description>
                        <DisplayName>DarkKnight</DisplayName>
<Group>Administrators</Group>
                        <Name>DarkKnight</Name>
</LocalAccount>
                </LocalAccounts>
            </UserAccounts>
            <RegisteredOrganization>Mikasa</RegisteredOrganization>
            <RegisteredOwner>Mikasa</RegisteredOwner>
            <ShowWindowsLive>false</ShowWindowsLive>
            <TimeZone>eastern standard time</TimeZone>
            <FirstLogonCommands>
                <SynchronousCommand wcm:action="add">
                    <CommandLine>cmd /C start
/wait E:\RemoteInstall\Images\Windows8\install\$OEM$\$$\Setup\Scripts\SetupComplete.cmd</CommandLine>
                    <Description>Various Apps Installation</Description>
<Order>1</Order>
                    <RequiresUserInput>false</RequiresUserInput>
</SynchronousCommand>
            </FirstLogonCommands>
        </component>
        <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <InputLocale>en-US</InputLocale>
            <SystemLocale>en-US</SystemLocale>
            <UILanguage>en-US</UILanguage>
            <UserLocale>en-US</UserLocale>
            <UILanguageFallback></UILanguageFallback>
        </component>
    </settings>
    <settings pass="generalize">
        <component name="Microsoft-Windows-Security-SPP" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35"
language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SkipRearm>1</SkipRearm>
        </component>
    </settings>
    <settings pass="offlineServicing">
        <component name="Microsoft-Windows-LUA-Settings" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <EnableLUA>false</EnableLUA>
        </component>
    </settings>
    <cpi:offlineImage cpi:source="wim:e:/windows-os-images/win8.1x86ent-wimfiles/install.wim#Windows
8.1 Enterprise" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>

Read-only file access from network volume

I get an read-only file access from network volume problem while sharing a drive from Snow Leopard to a Tiger install. Most of files were opening well, but *.fp7 (FileMaker) and *.xls (Excel) files won't open dealing with a read-only error.
As descibed in the last post of http://discussions.apple.com/thread.jspa?threadID=1406977 the client have the same share name of the server. Renomming it resolved the error!
Thanks!

right then, as it looks like I'm talking to myself....
I have just wiped clean the Macbook Pro.
I installed Leopard from scratch, then installed Office 2008.
Logged back onto the network share, and the read-only error came up again, ONLY in Excel.
bugger.
Did the same thing with my Macbook and all is fine.
Copy the file to the local hard drive, opens ok.
I then copied the file to another Mac on the network.
mmmm, opens fine.
what's the difference....
mmmm, the machine it opens fine from is running 10.4
the machine which hosts all the data is running 10.3.9
could this be the problem.
Just done a software update check on the 10.3 machine and there are some security updates that need doing.
Going to run that now and see what happens, otherwise I think the iMac running 10.3.9 is going to need to come up to 10.4 and fingers crossed this will solve it.

Trying to install the newest version of itunes on my pc and am getting "program cant start because msvcr80.dll is missing from your computer" reinstalling doesnt work. and then it says error 7 (windows error 126)

trying to install the newest version of itunes on my pc and am getting "program cant start because msvcr80.dll is missing from your computer" reinstalling doesnt work. and then it says error 7 (windows error 126). Any help would be appreciated. Using Windows 7 enterprise on an hp Z600

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Files missing from install directory

not sure what's happened to my computer but I can no longer install programs or updates for programs as I get the message "files missing from install directory"
How did they get corrupt in the first place? I get this when trying to download yahoo messenger of all programs...duh! I'm getting pretty frustrated since this has only started a month ago and I've been hoping something would fix itself but no....the last time my Toshiba service station updated was Jan 24 and now it says unable to connect with server....yet I got here to post a message and can get to the internet so don't understand why the updates can get in?
any advice?

that can be a problem with your windows.. your OS..
rebuilding your OS should be able to fix it.
oOo
*Read EULA before installing any software.
√

My Lightroom kepps stopping just after being loaded. My Lightroom is 5.4 64 bits installed on a Dell PC with Windows 8.1(upgraded from 8). I have uninstalled Lightroom and re-installed it with the same result. What could be the problem?

My Lightroom kepps stopping just after being loaded. My Lightroom is 5.4 64 bits installed on a Dell PC with Windows 8.1(upgraded from 8). I have uninstalled Lightroom and re-installed it with the same result. What could be the problem?

Try resetting your preference file next: http://www.lightroomforums.net/showthread.php?14226-Resetting-(or-Trashing-)-the-Lightroom -Preferences-file
It survives an uninstall/reinstall.

Camera roll missing from iphone 4S after update to iOS 8

camera roll missing from iphone 4S after update to iOS 8

Hi,
It's normal, it's replaced with another folder.
and now you can recuperate your deleted pictures from a folder or after 30 days they will be deleted.

HT1751 I was installing iTunes 11.1.4 and it was unsuccessful. I get a message 'Error 7 (Windows error 126). If I now try to open iTunes I get the message that 'MSCVR80.dll' is missing from my computer. Trying to download again has not solved the problem.

I was installing iTunes 11.1.4 and it was unsuccessful. I get the message 'Error 7 (Windows error 126). If I now try to open iTunes I get the message that 'MSCVR80.dll' is missing from my computer. Trying to download again has not solved the problem.

Troubleshooting issues with iTunes for Windows updates - MSVCR80

Where can I get help re: a file missing from Pages in iCloud?

Where can I get help re: a file missing from Pages in iCloud?

If the file was also on a mac, then there was a local copy of the file in ~/Library/Mobile Documents. If you use Time Machine or any other backup program on your computer, then try restoring the file(s). Similarly the same thing would be done on a PC, but I'm not sure where the icloud local copies are kept.

[svn:fx-trunk] 10506: New TLF file missing from svn 10505.

Revision: 10506
Author:   [email protected]
Date:     2009-09-22 10:43:46 -0700 (Tue, 22 Sep 2009)
Log Message:
New TLF file missing from svn 10505.
Added Paths:
    flex/sdk/trunk/frameworks/projects/textLayout/textLayout_edit/src/flashx/textLayout/opera tions/CopyOperation.as

Revision: 10506
Author:   [email protected]
Date:     2009-09-22 10:43:46 -0700 (Tue, 22 Sep 2009)
Log Message:
New TLF file missing from svn 10505.
Added Paths:
    flex/sdk/trunk/frameworks/projects/textLayout/textLayout_edit/src/flashx/textLayout/opera tions/CopyOperation.as

[svn:osmf:] 14905: Adding file missing from previous commit.

Revision: 14905
Revision: 14905
Author:   [email protected]
Date:     2010-03-22 05:37:59 -0700 (Mon, 22 Mar 2010)
Log Message:
Adding file missing from previous commit.
Added Paths:
    osmf/trunk/apps/samples/framework/OSMFPlayer/src/assets/fonts/
    osmf/trunk/apps/samples/framework/OSMFPlayer/src/assets/fonts/Standard0755.swf
    osmf/trunk/apps/samples/framework/OSMFPlayer/src/assets/fonts/readme.txt

If you're confident that the DP contains the new file, try deleting the deployment and re-doing it (not the deployment type - just the deployment to your test collection).
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Windows 7 - Files missing from network share after trying to burn and no data cached to be burned

Similar Messages

Maybe you are looking for