Windows 7 fills in missing glyphs - suggestions?

Hi all,
I wasn't sure how to title the thread in a way that caught what I was trying to get at, so please bear with me.  And I do realise that what I'm asking about is a Windows issue rather than an Adobe one, but I thought people here might have an insight into the problem, given that it affects those who focus on and use fonts specifically.  I haven't been able to find help or much engagement on any Windows forums, where the discussion is more about operating system capabilities and the issues of fonts are somewhat arcane to most posters.
So please indulge me for a moment, and if you can help me, then thanks!
I'm new to Windows 7.  What I've discovered is that Windows 7 has substantially changed the way it handles and displays fonts.  (Vista may have as well, but I never stepped into that pond.)  In both the Font Viewer and in any Font Manager that I've tried, Windows 7 fills in any missing glyphs in a font within the basic ASCII character set with an auto-generated generic set of glyphs, often making it very hard - or at least time- and effort-intensive - to determine which glyphs are from the font and which glyphs are auto-filled.  It was meant to be helpful, I imagine, but it's really not.
In fact, I find it really, *really* frustrating, because it makes it so hard to glance at the display of the font and see quickly whether it's got the glyphs I'm looking for or not.  (Some fonts are incomplete, for various reasons.  Sometimes they use the basic 1252 encoding but not the standard glyphs, and they too get any missing glyphs autogenerated.)
Am I the only one this bothers?
More to the point:  Has anyone found a way to turn this "feature" off?  Or can anyone give me an insight on the issue that I may not have thought about, especially ways to use it productively?  I find it really counter-intuitive and enormously unhelpful and distracting.
But enough whingeing.  Any help or thoughts would be greatly appreciated.

Miguel.
Thanks for the information.
Why was this done, do you know?  I can't think of a circumstance where this would actually be helpful, especially since, as you say, there is apparently no mechanism for the user to have control over the face that's used to fill empty glyphs.  For anyone purposely using fonts, it would seem to be more of an intrusion than assistance.  Nobody using fonts as part of purposeful design will want glyphs from a different face inserted out of their control;  you either use the font as is, or do something about the incomplete character set (if you have that capability), or you choose a different font.
But maybe I'm missing something?  What am I not understanding?
And why does it not happen with every font, just the overwhelming majority?  I haven't been able to spot a pattern to those where this "fallback" doesn't kick in, but in some instances it doesn't.  The Font Viewer fills any missing glyphs with the .notdef character;  in others, it inserts its own characters, and ignores the .notef character.  I can't figure out why.
By the way, John, as I said every font manager I've tried just shows what Font Viewer does, which is why I was sure it was an OS issue.  And Dov, yes I realise the problem itself has to go back to Microsoft, as I tried to make clear, but already I've got more information on the issue from posting here than the questions I've asked in Microsoft and Windows forums, where most people know nothing about fonts or their use.

Similar Messages

  • ITunes cannot run because some of its required filles are missing

    When I started iTunes I get an error message that says "iTunes cannot run because some of its required filles are missing. Please reinstall iTunes" I have uninstalled and reinstalled but still getting the same error message. It states that itune helper was not installed properly please uninstall and reinstall. Now I have no itunes...
    I have windows vista.

    Hello Melly89,
    Thank you for using Apple Support Communities!
    It sounds like we need to uninstall not just iTunes, but its associated softwares as well.
    I recommend this article to help with accomplishing this task:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Regards,
    Sterling

  • Hello friends recently shifted from windows to mac need some suggestion on which software to go ahead with for editing, excel,power point presentation

    Hello friends recently shifted from windows to mac need some suggestion on which software to go ahead with for creating word editing, excel,power point presentation.

    Only Microsoft's Office for Mac 2011 14.4.8 will work on your Windows Office files in their native document format. Anything else, and particularly Apple's Pages, Numbers, and Keynote will perform translation on open, and export. This can, and will, introduce differences to your original documents, especially when sharing with others in the Windows Office 2010/2013 applications.
    Here is my short list.
    Office for Mac 2011 v14.4.8
    LibreOffice (latest)
    The current iterations of Apple's Pages, Numbers, and Keynote are not what I would term business/professional grade applications. Apple updates them infrequently, ignores user friendly features, omits others, and has introduced default backwards incompatibility between Yosemite and prior OS X releases of these applications. Read the reviews in the OS X App Store. Even for free with a recent Mac purchase, these products will transform your mood.
    The free LibreOffice is aggressively developed and designed as an MS Office replacement suite. There are occasions where it can open documents that Office for Mac, and Apple's products ignore. Extensive PDF manuals for the individual applications. Unlike Word, you can have two-up page viewing with a button click, or edit multi-page PDF. There is a forms designer. It can open nearly any document including MS Publisher and Visio documents from the Windows space. I use it.
    MS Office 2015 Preview for Yosemite is available, but as its title would suggest, it is not done yet, and some features are missing. I created a single-page Word document with a DRAFT watermark. Only LibreOffice v4.4.1 was able to open this document and preserve the watermark.

  • TS4050 I am running Windows 8. Although my contacts and notes from my Ipod touch show up on icloud my calendar entries do not show up even though they do show up in my Google calendar and my windows phone calendar. Any suggestions not already covered?

    I am running Windows 8. Although my contacts and notes from my Ipod touch  show up on icloud my calendar entries do not show up even though they do show up in my Google calendar and my windows phone calendar. Any suggestions not already covered in trouble shooting articles?

    As I mentioned earlier, you have to decide which calendar you want to use.  You can either use Google or iCloud, but not both.
    If you want to use your iCloud calendar, go to Settings>Mail,Contacts,Calendars>Default Account (in the Calendar section) and set this to your iCloud calendar.  After doing so, all new events you add to your calendar will be added by default to your iCloud calendar, and as a result, will appear on icloud.com and your computer (if it is syncing calendars with your iCloud account).
    If, on the other hand, you want to use your Google calendar (as it sounds like you are doing with your iPod), simply add the same Google calendar to your phone and your computer.

  • "This window only" option missing from Show View Options

    Hi,
    When trying to create a background image for a disk image for distribution, the radio button for "This window only" is missing. I read instructions on the web on how to set the background image, make the file invisible in the Terminal. It will work on the 10.6 system that created it, but will not show on another computer. (Mac OS does not matter)
    I eventually had to do this on an old system with Tiger 10.4 . There when looking at View Options, the radio button is there labeled 'This window only' . I created the disk image and voila' it will keep the background image for any other computer.
    So my question is - Is there a keyboard combination to set this? This option is missing in 10.5 and 10.6 . This is really frustrating.
    TIA

    I'm experiencing the same problem. However, I don't think it's defaulting to an arbitrary colour. Rather, it seems to be defaulting to the exact opposite colour (than whatever colour was selected) in the spectrum.
    For example, if I set the background colour of a folder to red, it instead defaults to green (and vice versa). This is consistent for all opposing colours.
    I hadn't clued into Crayons being different — thanks!
    BlackBook   Mac OS X (10.4.9)   2GB memory. 120GB hard drive.

  • I'm getting an error message on Windows 8.  Missing apple application support.  Itunes will not install.  Please help!!, I'm getting an error message on Windows 8.  Missing apple application support.  Itunes will not install.  Please help!!

    I'm getting an error message on Windows 8.  Missing apple application support.  Itunes will not install.  Please help!!, I'm getting an error message on Windows 8.  Missing apple application support.  Itunes will not install.  Please help!!

    You probably need to either uninstall and reinstall itunes or to download the apple application support by itself
    you can download the itunes http://www.apple.com/itunes/ here
    then to do a complete uninstall / reinstall follow these instructions http://support.apple.com/kb/ht1923
    you could also use 7zip to extract the individual installer for apple application support from the itunes setup file http://www.7-zip.org

  • Itunes won't fill in missing information automatically

    Hi
    Until now, my itunes always filled in missing information automatically, as i type in the first letters of the genre, the album or the artist... Now it suddenly stopped. It still works when i go on "go info", as when i select several songs i want to edit genre of, but when i do it directly on the playlist it won't work anymore.
    Does anyone have the same problem? and does someone know what to do about it/how to change it back?
    I didn't change any settings, and i already checked in preferences but nothing like autofill (un-)checking.
    All i know is that it started a few days ago, i guess when i updated my itunes. well it updated kinda automatically i just clicked yes. But i mean i didn't do anything wrong, this thing is updating every two months!
    This not-filling-in thing is really annoying because well, guess i don't need to explain why...
    So when you know how to change it back please tell me!!
    Thanks for any help!!

    It sounds like you need to restore your ipod using the latest ipod software. Once you restore the ipod sync it back with itunes and it will allow you to set it up again. Use article 60983(click on support and enter that number in the search menu) when restoring the ipod, it will guide you through the process.

  • Question about "missing glyph" error in CS4/CS5 live preflight

    Hi all
    Basically I'm wondering what the "missing glyph" error refers to specifically and what are the implications of such an error. The help file doesn't mention it, as far as I can see.
    I have some PDFs (from WordPerfect) which are causing this error when imported into Indesign. I think the pages which cause this error have been corrected with a PDF editor (Iceni Infix) but Acrobat reports all the fonts are embedded and subsetted. A third-party preflight programs reports everything is okay too.
    Am I safe to ignore these errors?
    thanks,
    Iain

    I'm not sure "Missing Glyph" picks up missing glyphs in PDFs. What does ID point to when you click the page number hyperlink in the Preflight panel?
    If you have missing glyphs in your document text, they will look something like this:
    -- then again, perhaps you cannot see the pink highlight because of background (an image) or foreground (another character 'on top of it', or perhaps even a graphic over the text).
    How serious this is? It's ... critical! As you can see in my image, the only thing InDesign can do is notify you with the pink highlight and temporarily insert the font's own "missing" image (which may be a rectangle, a question mark, or even just a space).
    Fortunately, if you do need the character, all you have to do is change the font (for those characters only) to one that does contain the missing ones. You'll have to try all your system fonts before you find one that does and matches the rest of your text as well :-)
    There are a few special cases where InDesign gets it wrong, though. The Symbol font, for example, might not get imported correctly from Word, and in that case you have to manually change the character -- i.e., find the correct one in the Glyphs panel and insert it from there. There is also the Strange Case of the Invisible Marker: InDesign thinks there is something but if you check against the original Word file, there is nothing. This will usually insert a character code U+FFFD; you can safely delete them.

  • Font Embedding missing glyphs

    Hi all
    I want to to create a SWC with a font resource using the IDE.
    So I
    create in the library a font called Presenter_font I use
    Arial ( it has
    all the glyphs I need)
    I create a textfield and assign it Presenter_font* I embed
    the font ,
    I want to include some Greek symbols so I include the greek
    in the
    embedding options.
    I test the movie and all works fine "IFNβ" appears
    as it should
    Now the last part of the puzzle is to export for Actionscript
    so it
    becomes a class I can use elsewhere I do that using the
    linkage option
    and now when I test it I get "IFN" why has the beta glyph
    gone?
    I feel I am missing something ( as usual).
    Richard

    calvyan wrote:
    Is there a way for InDesign to do such substitution automatically? I.e., apply a default font, which can be specified by user, for all the missing glyphs.
    No. Alas, I might add. There is some sort of auto-catch, specific for Symbol symbols, but no-one knows how it works and you cannot manipulate it yourself.
    If not, how to search/find those missing glyphs with GREP or script?
    Not specifically, i.e., you cannot search for "any missing glyph". Add a GREP style which changes just the font (make sure it doesn't set the font style as well, or else your Bolds or Italics might disappear). Create a new Preflight profile that checks just for missing glyphs, so you won't miss any.
    None of this can be automated though.
    .. it seems easily (not to identify the unicode ranges which seems not very easy) to find them using GREP, but I failed to find it.
    InDesign's GREP flavor doesn't allow named Unicode blocks (http://www.regular-expressions.info/unicode.html), but I have successfully used character ranges to automatically set the font for Chinese, for example.

  • How find the missing glyph using javascript [like indesign preflight], and replace same glyph available font or

    The situation:
    I want to use basetext font, but some of the glyphs are missing in it, and are highlighted with pink boxes. common font [stix, etc.] have much more glyphs than basetext font. I can apply common font [stix, etc.]manually for each of the missing glyphs or insert two character and use kerning set it up, but it is tedious.
    Question:
    How find the missing glyph using javascript [like indesign preflight], and replace same glyph available font or insert two character and use kerning set it up?
    Any one know how to do this?
    Thanks in Advance,
    ~Jack

    Try Peter kehrl's script
    http://www.kahrel.plus.com/indesign/missing_glyphs.jsx

  • How to apply a new font for missing glyphs in another font?

    The situation:
    For an article, I want to use Font1, but some of the glyphs are missing in it, and are highlighted with pink boxes. Font2 have much more glyphs than Font1. I can apply Font2 manually for each of the missing glyphs, but it is tedious.
    Question:
    Is there a way for InDesign to do such substitution automatically? I.e., apply a default font, which can be specified by user, for all the missing glyphs.
    If not, how to search/find those missing glyphs with GREP or script? Since InDesign can identify the missing glyphs and marked them with pink boxes, it seems easily (not to identify the unicode ranges which seems not very easy) to find them using GREP, but I failed to find it.
    Any one know how to do this? Thanks.

    calvyan wrote:
    Is there a way for InDesign to do such substitution automatically? I.e., apply a default font, which can be specified by user, for all the missing glyphs.
    No. Alas, I might add. There is some sort of auto-catch, specific for Symbol symbols, but no-one knows how it works and you cannot manipulate it yourself.
    If not, how to search/find those missing glyphs with GREP or script?
    Not specifically, i.e., you cannot search for "any missing glyph". Add a GREP style which changes just the font (make sure it doesn't set the font style as well, or else your Bolds or Italics might disappear). Create a new Preflight profile that checks just for missing glyphs, so you won't miss any.
    None of this can be automated though.
    .. it seems easily (not to identify the unicode ranges which seems not very easy) to find them using GREP, but I failed to find it.
    InDesign's GREP flavor doesn't allow named Unicode blocks (http://www.regular-expressions.info/unicode.html), but I have successfully used character ranges to automatically set the font for Chinese, for example.

  • How do I fill in missing album artwork?

    How do I fill in missing album artwork for my music library?

    A smart playlist with the rule Has artwork is false will help you focus on the tracks that need artwork.
    Option-(or right)-click > Get Album Artwork should get artwork from the store if the album can be recognised. Otherwise Google is your friend, search for the relevant album, copy the image & paste it in to iTunes.
    Note sure if affects Mac users but there is a copy/paste bug with the current build (10.4.0.80) which can result in a blank image being pasted. Saving the image locally to your computer, and then dragging in the saved image will work around that.
    tt2

  • Window menu is missing in DW CS5 Mac

    I need to open the behaviors panel and I can't get to it. My window menu is missing. I have no idea how long it has been missing - I never open new panels. But, now I need it! Help! Here is a screenshot, it should be bestween Site and Help. How can it just disappear??? I have nothing in my prefs that would cause it, I've tried setting the interface with all the choices, nothing. I really need to access the behaviors.

    It may not. I wish I still had my MacBook. It makes it difficult troubleshooting from a PC.
    Same here. I'm always wary of offering definitive advice to Mac users until I double check my proposed advice online first.
    Time for a new MacBook Pro I think :-)

  • ERROR : element W1KOPF window main is missing

    Hai All,
                 I have migrated a standard program(it is of type module pool) and a Form from 4.7 to ECC.
    and sent  Form to testing. but while executing it in testing it is  raising an ERROR :element W1KOPF window main is missing .
                                        As it is a standard program we need not add any element but it is giving error. So, can help me out in this regard. Please it is urgent.
    regards.
    Prasadh

    check if there's any note about the sapscript or the
    print program if you don't find anthing make oss massage.

  • Window ADDRESS is missing

    Hi All,
    While executing of script from transaction iam getting an error
    in Error List as:
    In Form zsmglayout, window ADDRESS is missing.
    This is an information error prompt.Though I have to rectify this message.
    plz let me know its urgent.
    Regards
    Bhaskar

    Hi Bhaskar,
    may be the window ADDRESS is missing from the script zsmglayout and the print program must be trying to call the window at runtime. Try commenting the call to window ADDRESS in your driver program or else if its necessary to print the window ADDRESS, try creating one in your script.

Maybe you are looking for