Windows 7, Firefox and Citrix Access Gateway

Hello
I have a PC with Windows 7 Professional (32 bit).
I have web access to a Citrix Access Gateway, and it works mostly fine in IE9. But when I try to access via Firefox 9.0.1 the CAG writes that no Citrix client is installed. If I click Already installed, I can move forward, but then there's a box up asking if I want to open or save Launch.ICA when I try to open a program. Whatever I choose, it will not work.
I have a desktop PC with Windows 7 Home Premium and there are no problems even in Firefox 9.0.1. Same version of Citrix Web plugin installed on both PCs and UAC is completely turned off on both.
If there are more security options than in the Professional Premium - So is there anything I can try to disable the Professional?
I can not immediately see that I can do so much in Firefox.
sincerely
Martin

I tried to install the extension IE Tab 2 in Firefox.
It seems to have solved the problem.

Similar Messages

Lync via Citrix Access Gateway

Hi
Has anyone have feedback on publishing Lync via Citrix Access Gateway?
Thanks

Have you looked at the NetScaler documentation for Lync 2013? http://www.citrix.com/content/dam/citrix/en_us/documents/products-solutions/microsoft-lync-2013-citrix-netscaler-deployment-guide-v1-2.pdf
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

Citrix Access Gateway/ Java applet

I have just recently downloaded Maverick OS. But now i cannot get access to Citrix Access Gateway/Java applet through safari. However, when i use firefox i can. Why is this? I used to be able to get access through safari, until i downloaded Maverick.
Please help?

Is the Oracle Java plugin installed? If not, you need to install it.

Citrix Access Gateway VPN

I have a WRT300N. I am able to use the cisco VPN with no issues. I recently started a new job where we use the Citrix Access Gateway VPN. I am able to connect to the gateway with no problem but I can't get Outlook and IE 7 working consistently. Occasionally I can connect with Outlook but the majority of the time it fails. It does not matter if I use wireless or a wired connection. I am able to connect with no problem from other sites (i.e. hotel).

Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...
On the set-up tab change the MTU Size to 1350 and click Save Settings...
Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
Click on "Applications and Gaming" tab and then click on "Port Range Triggering" subtab...
1) On the first line in Application box type in ABC, in the Triggered Range type in 25 in both the boxes and Forwarded Range type in 447 in both the boxes , check the enable box... and click on Save Settings...

Problems with Citrix Access Gateway

Hello,
I have to use Citrix Access Gateway when remotely logging into to my work's records system. After upgrading my OS, now my computer crashes intermittently while using it. It never did this before. I have a MacBook Pro from 2009, and my OS is up-to-date (OS X 10.8.2 (12C60). The error report is pasted below. Thank you for any help you can offer:
Interval Since Last Panic Report: 80840 sec
Panics Since Last Report:          1
Anonymous UUID:                    0077834C-C239-8667-CADC-BD63B2A0BEA2
Tue Feb 5 22:41:32 2013
panic(cpu 0 caller 0xffffff8007243d5b): "a freed zone element has been modified in zone: kalloc.1024"@/SourceCache/xnu/xnu-2050.18.24/osfmk/kern/zalloc.c:214
Backtrace (CPU 0), Frame : Return Address
0xffffff800f253110 : 0xffffff800721d626
0xffffff800f253180 : 0xffffff8007243d5b
0xffffff800f2531c0 : 0xffffff80072435d2
0xffffff800f2532a0 : 0xffffff80072245ed
0xffffff800f2532d0 : 0xffffff8007622ca2
0xffffff800f2532f0 : 0xffffff7f87983cca
0xffffff800f253310 : 0xffffff7f87a95fe0
0xffffff800f253360 : 0xffffff7f87984d68
0xffffff800f2533b0 : 0xffffff7f87984eaf
0xffffff800f253400 : 0xffffff7f8796a515
0xffffff800f253480 : 0xffffff7f87968815
0xffffff800f2534c0 : 0xffffff7f87957083
0xffffff800f253570 : 0xffffff7f87981177
0xffffff800f253760 : 0xffffff7f879821d8
0xffffff800f253830 : 0xffffff7f88a56419
0xffffff800f253970 : 0xffffff7f88a55efe
0xffffff800f253980 : 0xffffff7f88a65989
0xffffff800f253db0 : 0xffffff7f88a02e2e
0xffffff800f253de0 : 0xffffff7f88a06eef
0xffffff800f253e00 : 0xffffff7f883c92a4
0xffffff800f253e20 : 0xffffff7f883c9237
0xffffff800f253e50 : 0xffffff7f88a1e8ac
0xffffff800f253e80 : 0xffffff7f88a03506
0xffffff800f253ed0 : 0xffffff7f88a014c7
0xffffff800f253ef0 : 0xffffff80076472a8
0xffffff800f253f30 : 0xffffff8007645daa
0xffffff800f253f80 : 0xffffff8007645ed9
0xffffff800f253fb0 : 0xffffff80072b26b7
      Kernel Extensions in backtrace:
         com.apple.NVDAResman(8.0)[A4C53A36-22B6-3075-82B9-9DE612A9C015]@0xffffff7f87914 000->0xffffff7f87c16fff
            dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f87872000
            dependency: com.apple.iokit.IONDRVSupport(2.3.5)[86DDB71C-A73A-3EBE-AC44-0BC9A38B9A44]@0xff ffff7f87900000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f878bd000
         com.apple.iokit.IOSurface(86.0.3)[578CEAAD-1465-3B29-B34F-09586288ED88]@0xfffff f7f883c5000->0xffffff7f883d6fff
         com.apple.GeForce(8.0)[2E56ED9A-D848-3795-9E52-56BABDC9000C]@0xffffff7f889fd000 ->0xffffff7f88abffff
            dependency: com.apple.NVDAResman(8.0.0)[A4C53A36-22B6-3075-82B9-9DE612A9C015]@0xffffff7f879 14000
            dependency: com.apple.iokit.IONDRVSupport(2.3.5)[86DDB71C-A73A-3EBE-AC44-0BC9A38B9A44]@0xff ffff7f87900000
            dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f87872000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f878bd000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide:     0x0000000007000000
Kernel text base: 0xffffff8007200000
System model name: MacBookPro5,5 (Mac-F2268AC8)
System uptime in nanoseconds: 82159887356528
last loaded kext at 75181534195095: com.apple.driver.AppleUSBCDC          4.1.22 (addr 0xffffff7f895cf000, size 16384)
last unloaded kext at 75263769681153: com.apple.driver.AppleUSBCDC          4.1.22 (addr 0xffffff7f895cf000, size 12288)
loaded kexts:
com.cisco.kext.acsock          1.1.0
org.fuse4x.kext.fuse4x          0.9.1
com.citrix.driver.net6im          1.1.6
com.deterministicnetworks.driver.dne          1.0.14
com.deterministicnetworks.driver.dniregistry          1.0.4
com.credant.iomediafilter.CREDANTShield          4855
com.credant.kext.CREDANTCrypto          4855
com.apple.filesystems.smbfs          1.8
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AudioAUUC          1.60
com.apple.filesystems.autofs          3.0
com.apple.iokit.IOBluetoothSerialManager          4.0.9f33
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AppleMikeyDriver          2.3.1f2
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.GeForce          8.0.0
com.apple.driver.AGPM          100.12.69
com.apple.driver.AppleHDA          2.3.1f2
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ApplePolicyControl          3.2.11
com.apple.driver.AppleBacklight          170.2.3
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.driver.AppleSMCLMU          2.0.2d0
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.SMCMotionSensor          3.0.2d6
com.apple.driver.AppleUSBTCButtons          235.4
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.driver.AppleUSBTCKeyboard          235.4
com.apple.driver.AppleIRController          320.15
com.apple.driver.AppleUSBCardReader          3.1.0
com.apple.iokit.SCSITaskUserClient          3.5.1
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.2.2
com.apple.driver.AirPort.Brcm4331          602.15.22
com.apple.driver.AppleFWOHCI          4.9.6
com.apple.driver.AppleAHCIPort          2.4.1
com.apple.nvenet          2.0.19
com.apple.driver.AppleUSBHub          5.2.5
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleUSBEHCI          5.4.0
com.apple.driver.AppleUSBOHCI          5.2.5
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleACPIButtons          1.6
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.6
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.DspFuncLib          2.3.1f2
com.apple.iokit.IOAudioFamily          1.8.9fc10
com.apple.kext.OSvKernDSPLib          1.6
com.apple.iokit.IOSurface          86.0.3
com.apple.iokit.IOBluetoothFamily          4.0.9f33
com.apple.driver.AppleGraphicsControl          3.2.11
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.driver.AppleHDAController          2.3.1f2
com.apple.iokit.IOHDAFamily          2.3.1f2
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.2.0d16
com.apple.nvidia.nv50hal          8.0.0
com.apple.NVDAResman          8.0.0
com.apple.iokit.IONDRVSupport          2.3.5
com.apple.iokit.IOGraphicsFamily          2.3.5
com.apple.driver.AppleSMC          3.1.4d2
com.apple.driver.AppleUSBMultitouch          235.7
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.1
com.apple.iokit.IOUSBMassStorageClass          3.5.0
com.apple.driver.AppleUSBMergeNub          5.2.5
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOAHCISerialATAPI          2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
com.apple.iokit.IO80211Family          500.15
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOAHCIFamily          2.2.1
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOUSBUserClient          5.2.5
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOUSBFamily          5.4.0
com.apple.driver.NVSMU          2.2.9
com.apple.iokit.IOHIDFamily          1.8.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          344
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.6
com.apple.iokit.IOPCIFamily          2.7.2
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core 2 Duo, 2.53 GHz, 4 GB, SMC 1.47f2
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.81.22)
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MJA2250BH FFS G1, 250.06 GB
Serial ATA Device: HL-DT-ST DVDRW GS23N
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24400000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x04600000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06110000 / 3

When you are online, is an IP Address on computer the same IP Address that is on http://www.whatismyip.com/ ?
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

HT1527 I have windows 8.1 and cannot access itunes store even creating a new apple id. With other users on the same computer I can access itunes store. How can I solve this?

I have windows 8.1 and cannot access itunes store even creating a new apple id. With other users on the same computer I can access itunes store. How can I solve this?

i had the same problem before using a fresh install of Windows 8.1. I have resolved this issue by running the program compatibility wizard. This I did by right-clicking on the iTunes icon in the desktop, selecting Troubleshoot compatibility, waited for it to detect compatibility issues and when presented with the following options: 1.) Try recommended settings; 2.) Troubleshoot program, I chose the latter. When asked what problems I noticed, I checked the following: "The program worked in earlier versions of Windows but won't install or run" and "The program requires additional permission"
After that, it tired to resolve the issue, and provided the necessary settings to run iTunes. Now it's running flawlessly. I have Avast anti-virus installed though.
HTH!

10.10.2 and citrix access agteway (CAG) dual monitors

My mac mini which runs 10.10.2 won't allow dual monitors with the citrix access gateway anymore. I dam pretty sure it is an Os side problem as my macbook pro which runs off 10.6 is working fine. Any ideas?

My mac mini which runs 10.10.2 won't allow dual monitors with the citrix access gateway anymore. I dam pretty sure it is an Os side problem as my macbook pro which runs off 10.6 is working fine. Any ideas?

IE 11 and VPN Registration via Citrix Access Gateway not possible

The registration screen for
the Citrix Accesss gateway is not displayed when
starting the IE 11. Thus, registration is
not possible. The side of the IE 11
is blank.
https://Access.fks.de/vpn/index.html
Kind regards
Bernd Joecks

Hi,
I test in my IE11, and the same result as yours, In my machine, it turns out to be a compatibility view issue, please press Alt+F >Tools>Compatibility view settings>then add the site to the list, reopen the webpage, then the access gateway
will be displayed.
Regards,
Yolanda
Yolanda
TechNet Community Support

I tried to update my i tunes yesterday and now Im getting error 7 (windows error 126) and cant access i tunes. looks like im not the only one

I tried updating i tunes yesterday and got ....ERROR 7 (windows error 126) and now cant access i tunes at all ?

See Troubleshooting issues with iTunes for Windows updates.
tt2

Citrix Access Gateway

After installiing Lion, I can no longer access my VPN using Citrix Acces Gateway.
Citrix Access Gatway (version 2.0.1) won't connect: Cannot log on at this time, SSL Error: Peer Hostname mismatch.
Anyone able to access Citrix Gatway VPN using Lion? I have to get on my VPN. any ideas?

Citrix say they are working on a fix... see here:
http://forums.citrix.com/thread.jspa?threadID=290906&tstart=30

Windows 2012 routing and remote access service with same subnet

I have internal server IP range -192.168.1.0/24
Windows routing and remote access service with vpn client IP -192.168.11../22
client side IP subnet is -192.168.1.0/24
So we wan routing \ NATING between 192.168.1.0/24 to 192.168.11.0/22 so if vpn user try to ping 192.168.11.5 it should internally forward all request to 192.168.1.5
Don't forget to mark helpful or answer connect me :- http://in.linkedin.com/in/satya11 http://facebook.com/satya.1000

Hi,
According to your description, my understanding is that VPN client and internal network has the same IP range -192.168.1.0/24. And you want to transfer internal network from IP address 192.168.1.0/24 to 192.168.11.0/22.
Agree with Charles David’s point of view. The easiest way to fix routing confusion would be to either change the VPN subnet or the VPN client subnet.
Or, if you configure Windows Server(RRAS) as VPN server, you may enable NAT to transfer internal IP address:
1. Open RRAS, add NAT.
2. New interface to NAT and configure it as public interface.
3. Open Address Pool tab, add IP address range 192.168.11.0/22.
4. Click Reservations, add reserved IP(192.168.11.0/22) and corresponding internal IP(192.168.1.0/24) one by one.
This would be a lot of workload. Besides, you may use 3rd party devices to transfer subnet IP addresses.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Can't open another window in firefox and add-on icons won't show

I had to do a system restore after downloading malware which avast stopped from activating. I downloaded Spybot and scanned/fixed various things it had identified but then my laptop wouldn't start in anything but safe mode. After I did the system restore, the malware and Spybot were gone, but Firefox crashed every time I tried to open it, so I had to use Internet Explorer to get online and download Firefox. Since then I have 2 problems: Firefox will only open in one window (it will let me open multiple tabs but only in one window) and my add-on icons (the Personas fox, the Greasemonkey monkey, the Boost for facebook infinity symbol, etc) won't appear on the bottom toolbar or browser bar as they always have, nor are they in the Tools drop-down menu as they always were. I can't get into Personas favorites at all either, despite having reinstalled the Personas Plus account twice. I assume that something causing these things happened when I did the system restore, as anything Spybot "fixed" should have been undone by the system restore? I have Vista 32-bit on a Dell Inspiron 1545 laptop. Please help!

Hi narik121,
So the build that you downloaded for CentOS 6.4, where did you download it from?
There are some versions of Firefox that may have been compiled by third party providers for specific Linux builds. Mozilla does not host these builds. [[Install Firefox on Linux]] is the reference to the official code for Linux.

Can you disable the print preview window from firefox and how?

I would like to disable the print preview window and be able to click print once. I don't have the firefox symbol on the top left of the window. Can someone please give me the steps to change the settings?

You can look at this extension:
*Universal Print: https://addons.mozilla.org/firefox/addon/universal-print/

Satellite C55-A-1N2 - Windows is broken and no access to repair option

Hello,
A friend of mine got a Satellite C55-A-1N2 brand new from november 2013 with windows 8.1.
The serial number is: yd344983s
At the beginning, there was a wifi issue.
I found lot of adware...
I uninstall most of them by hand, and clean everything with adwcleaner.
The portable works fine, i switch off the DNS client service and add anti-pupsadware in hosts file to prevent any new adwares installation.
All was ok and give it back to friend.
But at the next start up, windows was slow, unable to connect wifi, enter config panel, do anything actually.
I tried according to manual, to press F8 and power on, but that just switch on to windows login.
I tried also F12, and tried to use windows seven CD with no success.
Do you have any ideas of what i can do ?
That looks pretty bad.
Thanks.
Mickael
France.

> http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm
I dont know how to access that blue menu
> As mentioned by Keany, you have to completely power OFF the system. The point is that Win 8 as well as Win > 8.1 do not power off the notebooks but set it to hybrid shut down mode in order to speed up the system boot > process.
As i said in the first post, it was no possible to do lot of things apart login, so set the option for full power off was not possible.
I manage to access to bios using F2, but was not useful (just play with CMS vs UEFI, normal boot speed ...)
Nothing to lose, i tried the "0" that lead me to HDD Recovery for a full reset.
Manual said that it will erase eveything, but actually user & documents are still here.
Now that it works fine, i set the option for full power off for more tests and acknowledgment :
- The F12 works, HDD recovery or bootable devices choice. Ok
- The 0 still lead to HDD recovery. Ok
- The F8 still does nothing ... ??!! Strange !
So manual are not very accurate on this model, *but my job is done and i did recovery dvds for next time.*
Thanks.

Citrix access gateway website -- the application frame does not load properly

Goal - use remote desktop via citrix website; Did work in FF in July; now (Aug) it doesn't
Problem: Application frame with link to RDP is blank
I log into website OK - three frames should be present: 1) fileshare - I don't use this & it appears to load OK; 2) websites - I don't use this & it appears to load OK ; and 3) Applications - This frame is blank but it should load a collection of links including a link to remote desktop
Behavior: If I have just cleared the history then the application frame will "clock" (this is normal) but instead of showing the links a blank frame appears; If I have NOT just cleared the history, the application frame shows the "clock" but it is frozen; slightly different but still results in blank application frame.
I have tried:
1. clear history before logging in (change in "clocking" but still results in blank application frame
2. IPV6- disable by set to true; No impact on problem; toggle back to false
3. network DNS disable prefetch; disable by set to true ; no impact on problem; toggle back to false
4. preference named plugins.load_appdir_plugins; change its value to true; no impact - set back to false
One significant change I have made "around" the time of the problem is I uninstalled norton that came preinstalled, installed adaware, and removed/ disabled the adaware browser toobar ;
I will appreciate any suggestions from the community.

FYI: The problem persists as of 9/20 with version 24.0

Windows 7, Firefox and Citrix Access Gateway

Similar Messages

Maybe you are looking for