Windows 7 hanging at startup after oracle 11 g installation

hello Folks,
I'm using a dell laptop with i7 processor , 8 gb ram and win7-64 O S. Like the above mentioned issue its getting hanging at the start up and almost taking upto 5-10 mins to load other services and applications. Is it something related to this particular version? Because 10 g was running perfectly in the same machine. Is there is any other alternatives other than manual starting of oracle services...
Can i get a clear solution for this ....Thanking all in advance....

Pl post exact Win 7 version and exact "11g" version - pl note that Home version of Win is not supported for any Oracle installs. 11gR1 has not been certified on any Win 7 version. If you wanting to install 11gR2 on Win 7 Home, use a Linux VM - pl see my blog (linked in my profile) for detailed steps.
HTH
Srini

Similar Messages

WebLogic 10.3.2.0 hanging at startup after "The server log file is opened."

Hi,
A WebLogic 10.3.2.0 server is hanging at startup. There are no error messages. The last command in the startup window is:
"The server log file <log file dest> is opened. All server side log events will be written to this file."
I think the next line should be:
"Security initializing using security realm realm."
Any ideas on what could be the issue? For instance what resources should be accessed at that point of time? There is sufficient space left on the (virtual machine) disk. The VM configured with 8GB memory. Could it be performance related still?
Following is written to the log file:
####<12.aug.2010 kl 09.47 CEST> <Info> <WebLogicServer> <oim> <> <Main Thread> <> <> <> <1281599254656> <BEA-000214> <WebLogic Server "AdminServer" version:
WebLogic Server 10.3.2.0 Tue Oct 20 12:16:15 PDT 2009 1267925 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.> ####<12.aug.2010 kl 09.47 CEST> <Notice> <Log Management> <oim> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1281599255312> <BEA-170019> <The server log file ....logs\AdminServer.log is opened. All server side log events will be written to this file.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Log Management> <oim> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1281599255390> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Diagnostics> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599255671> <BEA-320001> <The ServerDebug service initialized successfully.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Store> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599256515> <BEA-280050> <Persistent store "WLS_DIAGNOSTICS" opened: directory="....s\domains\oim\servers\AdminServer\data\store\diagnostics" writePolicy="Disabled" blockSize=512 directIO=false driver="wlfileio2"> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "t3" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "t3s" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "http" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "https" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "iiop" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257156> <BEA-002622> <The protocol "iiops" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257156> <BEA-002622> <The protocol "ldap" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257156> <BEA-002622> <The protocol "ldaps" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257187> <BEA-002622> <The protocol "cluster" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257187> <BEA-002622> <The protocol "clusters" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257218> <BEA-002622> <The protocol "snmp" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257218> <BEA-002622> <The protocol "admin" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257218> <BEA-002624> <The administration protocol is "t3s" and is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <RJVM> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257468> <BEA-000570> <Network Configuration for Channel "AdminServer"
Listen Address :7001
Public Address N/A
Http Enabled true
Tunneling Enabled false
Outbound Enabled false
Admin Traffic Enabled true>
####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257687> <BEA-002609> <Channel Service initialized.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Socket> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599258000> <BEA-000406> <NTSocketMuxer was built on Jan 13 2005 17:47:03
####<12.aug.2010 kl 09.47 CEST> <Info> <Socket> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599258078> <BEA-000436> <Allocating 3 reader threads.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Socket> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599258078> <BEA-000446> <Native IO Enabled.> ####<12.aug.2010 kl 09.47 CEST> <Info> <IIOP> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599259500> <BEA-002014> <IIOP subsystem enabled.>
Thanks!!

tried both of these, still having same error as below:
<Sep 8, 2010 1:32:37 PM IST> <Critical> <Security> <BEA-090402> <Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.>
<Sep 8, 2010 1:32:37 PM IST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:959)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User weblogic2 javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User weblogic2 denied
at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:250)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at java.security.AccessController.doPrivileged(Native Method)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Truncated. see log file for complete stacktrace
>
<Sep 8, 2010 1:32:37 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Sep 8, 2010 1:32:37 PM IST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Sep 8, 2010 1:32:37 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Pls help me out ASAP...

Boot Camp Windows 7 Black Screen After Graphic Driver Installation

Hi,
I have MacBook air (2012 model i think). I tried to install windows 7 64 bit using bootcamp. On the first windows boot and before installing boot camp drivers windows was fine. After installing bootcamp drivers and windows restart the windows came up to a black screen and stuck forever. When I uninstall graphic driver (intel HD 4000), windows is good again. Tried to reinstall different graphic drivers versions - didn't work. searched internet everywhere and didn't find any solution.
please help!

I have solved this issue now but seem to have encountered another one. I solved the above issue simply by keep on trying time and time again, partitioning the hard drive and trying to install windows 7.
Anyway, I have encountered this error: windows setup could not apply the configuration set. The WINDOWS folder cannot be found.
Please help!

Firefox 9.0.1 hangs on startup after update (OSX 10.6.8), even in safe mode.

I shut down Firefox because some parts of the www.washingtonpost.com site no longer displayed (icons), and Firefox automatically installed the update on restart.
Then the "Well this is embarrassing..." Restore Session screen popped up, but the program hung a few seconds after I clicked Restore Session. I had to Force Quit to close it.
Every time since then Firefox presented the same Restore Session screen, but hung after only a few seconds. Until I tried working with Safe Mode, and turning off customizations. Now it just hangs on a blank screen.

Try to reinstall Firefox 9.0.1.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
*Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html
*Trash the current Firefox application to do a clean (re-)install
*Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
You can use these steps to check if images are blocked:
*Open the web page that has the images missing in a browser tab.
*Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
*Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
*Go to the Media tab of the "Tools > Page Info" window.
*Select the first image link and scroll down through the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.
See also:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*https://support.mozilla.org/kb/Images+or+animations+do+not+show

Gray screen during startup after boot camp installation

I cannot either Mac and Windows t start on Mac Mini after I updated with Windows7 on Bootcamp.

Hi there Sudarshan21,
I would recommend taking a look at the troubleshooting steps found in the article below.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
-Griff W.

[SOLVED*] system hangs at startup after grub screen

My system is hanged after the grub window. I choose Archlinux, like always, apparently starts to boot and the next screen is frozen. It says:
/dev/sda2: recovering journal
/dev/sda2: clean ....
systemd-fsck[208]: /dev/sda1: recovering transactions file
systemd-fsck[208]: /dev/sda1: clean ...
systemd-fsck[221]: /dev/sda4: recovering transactions file
systemd-fsck[221]: /dev/sda4: clean ...
And that's it. It frozes in this point. I didn't make any update since 3 days ago. Yesterday the computer runs well.
I tried to enter into Fallback mode, but I get to the same point.
Any suggestions?
Solved partially: I connected a second screen this morning. When I disconnect it, the system starts. Now I have to solve how to add a second screen because when I add it once the system is running, it hangs.
Last edited by doblerone (2014-03-01 08:32:18)

Have you looked at any logs whatsoever?
Edit ::
doblerone wrote:Solved partially: I connected a second screen this morning. When I disconnect it, the system starts. Now I have to solve how to add a second screen because when I add it once the system is running, it hangs.
Thats more like you found a work around and is far from being solved
Last edited by Kartious (2014-03-01 13:46:46)

Simple insert, delete and update not working after oracle 10g installation

Hello,
I made a new installation of Oracle 10g (10.2.0.1.0) and created a schema . Now i try to insert or update data using simple queries, but unfortunately nothing happens. I tried inserting or updating data even via sqlplus, but unfortunately the same result. Query takes infinite time to end, so i had to manually end it every time... No errors... No warnings... but takes long time... I have given all the required permissions to the schema but the same result. Can somebody help me figure out the problem?
Tried creating a new table and the insert and delete are working fine... think the problem is with this table... Imported the rows of the table from another online database. I dont understand how this might be a problem.
Edited by: user13333704 on Mar 15, 2011 1:26 AM

However how do you generate awr reports and how to find the session wait?TO generate the AWR report
sql> ?/rdbms/admin/awrrpt
http://download.oracle.com/docs/cd/B19306_01/server.102/b14211/autostat.htm#BABDHAGF
The event column in v$session , in v$active_session_wait will show you the session wait event.What the session was actually waiting for.
HTH
Anand

Wifi interface hanging on startup after enabling GDM service

I've got a fresh install. I wanted to boot directly to a gnome login screen so I enabled GDM using "netctl enable gdm". After I did that, I can't boot to a prompt. instead, it hangs on "brcsmac bcma0:0: brcsmac: brcms_ops_bss_info_changed: associated"
If someone can tell me what log file to post, I can just switch to a different console and post it to pastebin. I just don't know which to paste.
Thanks!

You could paste it here within code tags, for rapid readability
Beside that, the module is loaded, but the first output is missing. I'm interested to know what is the pID and vID of that device, so I hope to find more informations.
One more think Brand and model of your hardware.
Are there conflicts with module b43?

Unlocking scott after oracle 10g installation

I accidentally hit the ok button and did not get a chance to click on the password manager and unlock scott. Can any one tell me how to do it now that I have already installed Oracle on my computer?

Hello,
The previous post gave you the right answer.
However, if you want to check the status of all the Users account of your database, you
may use the following query:
alter session set nls_date_format='DD-MM-YYYY HH24:MI:SS';
select username, account_status, lock_date
from dba_users
order by account_status;More over, to change a User password you can execute the statement below:
alter user {color:red}username{color} identified by {color:red}password{color};Hope this help.
Best regards,
Jean-Valentin
Edited by: Lubiez Jean-Valentin on Jan 17, 2010 2:53 PM

Computer Hangs at Startup after Tiger Install

Hello !
I've tried to install
Tiger on my regular Desktop Computer. Everything seemed to be going okay. It finished
loading and then told me it was going to restart. Upon restart the apple icon appeared and
then the little rotating disc below the icon. After about three minutes the Apple Icon disappeared and was
replaced with the symbol of a circle with a line through it. As it was in the same gray as the apple icon so
I wasn't sure if it was part of the restarting process or not. When the screen persisted for another ten minutes
I decided to leave the computer on over night to see what the morning would bring. The screen was still the
same in the am. I tried to restart it and the same thing happened and continues as I write this. I can't use my
computer.
Can anyone help ?

Hi Dan!
Did you use a Full Retail Version of the Tiger Install DVD, or the one for your PowerBook?
Powerbook G4 Mac OS X (10.4.4) 1.5 gig ram (Specs from another of your posts)
ali b

Windows freezing during boot,after vga drivers installation

System freezes during the boot process,as soon as i install nvidia drivers.i ve tried eliminating the problem with several ways,but nothing seems to solve it.different windows version,different drivers version,different cpus,different memories,nothing attached on the board except the hdd and ram,different psu,manually installing drivers,stopping nvidia services,different vgas(9600gt,9800gt,gts240/250)although it works with pov 9300gs or 8600gt 512.additionally,system boots up normally in safe mode.is there anything you can possibly propose?
thanks in advance.
cpu:intel c2d e8500
m/b:msi p43t-c51 ms7519 latest bios
memory:2x kingston 2gb 6400
psu:premier 450w
vga:point of view 9800gt 512 green edition
os:windows xp pro 32bit
hdd:500gb hitachi
pci:serial port oem card

guys i have the exact same problem it has nothing to do with psu i have a coolermaster 800W and a msi9800gt vga this m/b has compatibility issues with nvidia graphics drivers and some nvidia vgas. I have two of them. Both have the same problem get an AMD graphic card. Trust me i know what i'm talking about. I tried every possible solution out there nothing worked. I emailed msi technical support they just send me latest bios and latest drivers nothing. I tried to update vga bios nothing. I tried tree different psu all from different vendors guess what nothing. I changed my memory modules nothing. I changed cpu nothing. I tried every bios available nothing.

OS IP change after Oracle 10g DB Installation

I need to confirm what will be the effect if i change OS IP after Oracle Database Installation?
Please guide
Thanks,
Waheed.

When you change the IP address of the server, and you have used the hardcoded IP everywhere, you likely need to reconfigure the database control.
How to do this has been posted here many times, and of course it also documented.
Look for/search for emctl reconfigure.
Sybrand Bakker
Senior Oracle DBA

Oracle Universal Installer for 8.1.7 does not run

Downloaded and unzipped successfully ORACLE 8.1.7 EE for MS WINDOWS, when try to install, Oracle Universal Installer just stops reponding after a second or so without any message.
OPERATING SYSTEM MS WINDOWS 2000 SERVER SP3
Machine Intel P-IV 2.0A
RAM 512 MB
HD 10 GB NTFS partition on 60G IBM 7200 RPM H.disk.
ORACLE 8.1.7 EE for MS WINDOWS.
As this computer is not connected to any network yet,
After this Downloaded ORACLE 8.1.7 SE, unziped and tried to install it on the same machine. But this version behaved the same way. Can any body help?

You need to read Note:131299.1 available on Metalink.
ALERT: Oracle Installer 8.1.X Hangs on Machines with Pentium 4 Processors.
There is a patch available.

IMac won't startup after restore from time machine

After I restore my backup from time machine ( twice ) mi iMac halt at startup and won't startup. It stuck at the apple logo forever. I also restarted holding down command R safe mode and install OS X and it will startup okay but can't see my buck up files and applications here. Then I restore from time machine again using an earlier backup and it won't startup again. Please any help I will appreciate.

There could be a few reasons for this.
First what version of OS X do you have installed?
What version of OS X is the Time Machine Backup file from?
Did Reinstalling OS X from Recovery install the same version you had before reinstalling?
If you have not changed OS X versions then:
It sounds like there may be a bad file in the backup that is causing the computer to not startup after restoring it. This is especailly true if the computer boots just fine after a fresh installation of OS X, but without the Migrated Data being restored.
If that is the case, then the solution is not a quick one. You have to hunt down the bad file.
Moving Files Manually (Not in Migration Assistant)
Manually access your Time Machine backup folder from within Finder (you should see the backup drive in a Finder Window or on your Desktop). Once open, manually move data from the User folder (documents, music, movies, photos etc.) into their respective folders on the Mac. Reboot after each folder you move to see which folder contains the corrupted file then delete the affected folder/file after reinstalling OS X from Recovery.
If none of the files cause the computer to hang at startup after moving all your User data, then the issue is from within the System or Library folders.
NOTE: DO NOT manually move Applications, System, or System Library files over to the Mac. You can cause major issues with the current installation by doing so. It is safer to just reinstall all the Apps from wherever you got them so they can recreate their support files and such themselves.
2- Using Migration Assistant
Basically, if you have discovered the affected file. You can just simply delete it from the backup folder.
Reinstall OS X after you have done that, and use Migration Assistant to automatically migrate the data over minus the affected file/folder.
Its a pain in the rear, but it will at least let you salvage most of your data.
Let me know what happens riorec!
- Captain

Firefox hangs upon startup, or starts a process but doesn't open the browser.

Within the last couple days, Firefox has had a lot of problems.
When I open it, the window hangs and freezes after a few seconds, if it opens at all. Other times, trying to open Firefox simply won't open the window, but will leave an extra process running in the background that I have to manually shut down via Task Manager.
I have made a fresh profile. I have restarted Firefox. I previously had hardware acceleration checked, and disabled it; still having the same problem. I have uninstalled and re-installed Firefox multiple times. I have run a scan of my system with Malwarebytes; nothing detected. It's not even generating a crash log. I have looked through the support forums, found people with problems similar to mine, but no solutions posted for them since sometime last month.
Firefox seems to run normally if do an install of version 21, which opens up the browser window. Everything works fine, until I close the browser and then re-open it.

Start Firefox in Safe Mode to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
 To Enable SafeMode 
*You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
*''Once you get the pop-up, just select "'Start in Safe Mode"''
If it works in Safe Mode and in normal mode with all extensions (Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: "Firefox > Quit Firefox"; Linux: "Firefox/File > Quit")
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Windows 7 hanging at startup after oracle 11 g installation

Similar Messages

Maybe you are looking for