Windows 7 HDMI stops working after login in normal boot. Safe modes work

Hi guys, I have a problem and I am a complete dummie at this. (Sorry in advance for bad english and hardware/software knowlegde.)
Here's what happened: Yesterday evning I turned off my PC after playing my games. Today when I got home from work my PC looses HDMI connection after "STARTING WINDOWS" screen. That's when my monitor says "No Synch" which means it cant detect a HDMI. I have to hold in off button and restart and then i get to this black classic screen where I can choose Safemode etc. and Normaly. Turns out I can enter safe mode and HDMI works, but i've tried normaly many times and it wont work!
So I've been reading all day and haven't found any working solution(lowering my resolution etc.) So it was suggested that I needed to u-innstall my video drivers and get them again. Or even get older versions first and then installing new ones along with the latest windows update. My problem is that I have no idea what video card I have and in safe mode I can't see it in CONTOL PANEL display settings either.
I'm playing on a little **bleep** tv monitor JWC something btw.
So I'm stuck not knowing what video drivers I need and where to get them, if that's even the problem to beginn with?
I hope someone out there are smarter than me, haha! Thanks Guys!

I'm sorry I thought you were using a notebook and the monitor was your 2nd display device... So it's your primary display, right? And safe mode works...I don't know then. Is there any auto adjustment button on monitor or similar function in monitor's menu?
I work for HP

Similar Messages

Macbook crashes after login, but fine in safe mode... please help!!

So, out of nowhere my trusty macbook a few seconds after my desktop appears the computer needs to restart screen scrolls down, and that's pretty much it, as far as i'm aware I haven't changed any permissions and as far as i can see there isn't a programme to blame, as mentioned safe mode is fine, this is how i'm able to write this, is there anything I can do from here to try and fix the problem with the regular login?
Thanks.
Will.

If it works in safe mode then that usually means there is something related to system files causing the problem or the installation of incompatible software or malfunctioning software. The simplest solution is to reinstall OS X as follows:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Windows media player stop working after upgraded from firefox 6.02 to Firefox 7.01 yesterday.

windows media player stop working after upgraded from Firefox 6.02 to Firefox 7.01 yesterday.
the plugin for win media player is already installed and working fine in FF 6.02 before upgrade. i have Google this issue without any result so far. so i reinstalled the old version 6.02, until fix is found.
anyone has the similar issue with Firefox 7.01 in Win 7 32 bit ?

The issue was not with FF 7.01. VLC player version 1.11.1 is conflicting with windows media player when FF 7.01 tries to play media files! Which was not happening before in FF 6.02.
VLC and plugin media player need to be uninstalled first, then uninstalled FF 6.02. Install FF 7.01 and then win plugin media player again.
Test media player at www.vdat.com/techsupport/windowstest.asp

HDMI stopped working on my HD DVR yet AGAIN!

I've been a FiOS Internet customer for years now and I love it! However, it's been less than a month since I signed up for FiOS TV and I'm already repenting for it. I signed up because of the "superior" HD delivered via Fiber Optics etc. Yet from the first day, the technician warned me that the HDMI will not work because of a BUG in the motorola DVR and there is no solution for it. If it works, great, if not, sorry about your luck!
Well, day 2 and the HDMI stopped working, green screen on my 61" Panasonic LCD HDTV and all kinds of messages! FiOS TV support were lame, but they came back to replace the HD DVR. I come home to find the technician replace the box with a similar defective piece and hook up the system using component for video and composite for audio! HORRORS! The sound quality had degraded beyond recognition, and the picture quality on my large screen was noticably bad.
After many hours, and many phone calls with the tech support, I was assured that Verizon/Motorola was releasing a firmware upgrade that would fix the HDMI malfunction. I waited for April 14th, (the upgrade release date) but there was nothing different. Finally, they sent another technician with a "new and improved" box that would work! No such luck. He went on to prove that my HDMI cable that had worked flawlessly with DirecTV for 2 years, was faulty. So he replaced the HDMI cable, got the box to work and was off.
Well, 2 days later, back to square one. Green screen. HDMI integrity compromised message etc. By now I was so frustrated that I was ready to cancel the stinking "superior" HD from FiOS. More phone calls, no progress. This time round they had the nerve to tell me that my TV was defective and I should contact Panasonic to figure out why HDMI does not work! Talk about shifting blame from this faulty buggy DVR to a TV that has worked flawlessly for years with DirectTV and DVD players etc.
As I read this forum and others on the net, it seems that this issue has bugged customers since 2005! Pretty much every other DVR out there is either superior or has more hard disk space than the verizon motorola box! Has anyone else here had these issues? I've tried looking at the other threads, but the forum does not allow me to reply to those so I can't find if anyone has actually seen Verizon do anything about this defective DVR nonsense. I feel I've been cheated into paying top dollar for an obsolete piece of junk. Please help if you can. A very frustrated and sitting-on-the-fence customer!

Also, blaming Mototola for the issue is not the solution to the problem. If Verizon is using Motorola DVR's and charging it's customers for those boxes, then it's Verizon's problem. Verizon should push motorola to get their crap working. I'm not a motorola customer. I'm a FiOS TV customer. As far as I'm concerned it's Verizon that's supplying us defective DVR's and causing us heartburn over the issue. It's not our job to get mororola to fix the DVR, it's Verizon's job to do that.

Windows 7 - browser stops working still connected

As the title says Windows 7, browser stops working after some time passes.
This effects IE and Chrome. I can still ping www.google.com or it's IP address. (all other computers on the network are fine)
I've used both the wired and wireless connection without the same results.
I reboot and it works, I walk away from the work station and then boom no browsing.
I've turned off the firewall, released and renewed the IP, netsh winsock reset none off this worked.
I've gone into internet options and ensure that no "proxy' boxes are checked.
I've uninstalled the network card drives and restarted the machine.
I've ran Malwarebytes (no infections), ccleaner to check for registry problems. Nothing there.
I've disabled the power saving options and uncheck "let windows turn this device off"
I've also ran Norton and Mcgafee uninstallers just be sure there aren't any residue from those installed.
No bittorrent clients
So I'm online but can't browse on this one computer? what's the deal please Help!

ctrl+alt+del to display the tasksmanager...Processes tab,
any google processes running? googletoolbarupdater.exe (x86 or x64)?
any other suspicious/unknown processes running? see why not to use ccleaner on win7 machines http://forums.steampowered.com/forums/archive/index.php/t-971768.html spybot S&D installed? turn off 'Teatimer' Tools>Internet Options>Security tab, click "Reset all
zones to default".... there are security zone settings for meta refresh. running IE in noAddons mode is the first test (close all open IE windows first, if using IE8 reboot your computer to clear any hidden IE crash recovery processes or use the taskmanager
to kill any orphaned IE processes) Start>Control Panel>Sharing and Networking>run the diagnose connection problems tool to diagnose network connection issues. IE9....f12 to display the developer tool>Networking tab, click "Start Capturing"..... to trace network
requests and responses. IE8 and earlier.... download fiddler from http://fiddlertool.com HTH
Rob^_^
also Tools>ActiveX filtering (enable/disable) google.com injects an ActiveX 'object' (googletoolbar.dll) that tracks your search and surfing history, in their search and results pages.

"Windows Explorer Has Stopped Working" Error Message Loop upon Startup of WIndows 7 Ultimate 64-bit

Ok I have a HP Touchsmart 6000 running Windows 7 Ultimate 64 bit OS. It is my 74 year old mothers computer and about 3 months ago it started acting up. First thing that happened was the internal DVD Burner started working intermitently, recognizing
her QuickBooks backup DVD files occasionally. I got her a new internal DVD burner and it worked for a while. during that time on Startup Help and Support would all of a sudden popup right away. Then recently Adobe Acrobat would
launch a PDF file about Flash and keep opening multiple instances of it. Now her new DVD doesnt work again and on startup at the windows desktop she gets an error "Windows Explorer has Stopped Working". No matter what I click the error
keeps looping. No program has been opened that causes it to crash because the error happens immediately and keeps repeating. I have tried to boot to Safe Mode, Safe Mode with Networking and have tried System Restore to no avail.
I have ran Malwarebytes Antivirus, Malwarebytes AntiExploit, AntiRootkit as well as Combofix. I have run the AntiMalware software from Microsoft and have updated all the drivers for the HP system. To no succcess.
At one point the system did load and an error came up JAN2OSD failed to start due to missing ACPI or something like that. For that brief moment Explorer stopped crashing. When I finished updating driverss though the error came back.
Please Help as she is about to cry and no one wants to make a 74 year old woman cry.:)
Thanks,
Jeff

Hi,
According to the steps you have performed, we have followed the steps mentioned in this KB article?
Error: Windows Explorer has stopped working
Hvae you tried the repair install of Windows 7? Follow the steps here:
How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
Besides, if issue insists, please follow the steps below to generate a dump file:
1. Create a new folder (named New folder)under C: drive.
2. Please save the below as a .reg file, and then import it to registry, reference here:
===
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps\explorer.exe]
"DumpFolder"=hex(2):43,00,3a,00,5c,00,4e,00,65,00,77,00,20,00,66,00,6f,00,6c,\
00,64,00,65,00,72,00,00,00
"DumpCount"=dword:00000010
"DumpType"=dword:00000001
"CustomDumpFlags"=dword:00000000
===
3. After that , if Windows Explorer stops working again, please check the
C:\New folder for dump files and then upload them.
Meanwhile, please also make a contact with the manufacturer to see if we could get any further help from there.
Best regards
Michael Shao
TechNet Community Support

Windows 7 Error Message: Microsoft Visual C++ Runtime Library Runtime Error.... Followed by Windows Explorer Has Stopped Working

I am running a system that is not quite 6 months old, which is loaded with Windows 7 Professional, 64 bit.
The error message that I get is as follows: Microsoft Visual C++ Runtime Library. Runtime error! Program C:\windows\Explorer.exe. This application has requested the runtime to terminate it in an unusual way. Please contact the
application's support team for more information.
Once I respond to that message, I get a message that says "Windows Explorer has stopped working. Then I get "Windows Explorer is re-starting"
I don't know if the next event is related - today, immediately after getting the message above, I got a pop-up that said "An update to Adobe Flash Player is available" - and I am given the option of installing it or not. Today, I did not install
the update - although I recall having accepted this update in the past (again, I don't know if the two situations always occur together).
Is there some help I can be provided to correct this problem? I have looked at several related topics in this database, but have not found anything that seems to directly relate to my question.
Thanks! Mark

Hi,
Did you try to reinstall the Microsoft Visual C++ 2008 Redistributable
Package (x86) to check this issue?
What about to boot the computer in safe mode and Clean Boot to test this issue?
Regards,
Vincent Wang
TechNet Community Support

Windows Explorer has STOPPED Working

OK, I have iTunes 8 installed, the allegedly CORRECTED version. When I start iTunes 8, I receive a message that says, "Windows Explorer has Stopped Working" and gives me two options:
First Option - Check online for a solution and restart the program (Program being Windows Explorer).
Second Option - Restart the Program (Program being Windows Explorer).
Option One does not provide a solution, just restarts Windows Explorer!
Option Two restarts Windows Explorer.
When I choose to "View the Details" of the error, I receive the following:
Problem signature:
Problem Event Name: BEX64
Application Name: Explorer.EXE
Application Version: 6.0.6001.18000
Application Timestamp: 4791970c
Fault Module Name: UndWinExpShExt.dll_unloaded
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 48801d73
Exception Offset: 0000000004f3273a
Exception Code: c0000005
Exception Data: 0000000000000008
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 09ef
Additional Information 2: c6a2b1bd6acb10012eb7d5dd1b45e415
Additional Information 3: 3a70
Additional Information 4: 0185804ddbcb00af322d2112cbd2b831
No other error codes are provided and everything works OK, just this hiccup in the giddy-up along the way of iTunes 8's start up routine.
Is anyone else having this issue with iTunes 8?
Thanks ~~ Gunny

I THINK that this is the repeated one, because I was doing it one after the other. And yes, as far as I know, everything is up to date. I'm fairly advanced when it comes to computers, but this has me boggled.
Problem signature
Problem Event Name: APPCRASH
Application Name: explorer.exe
Application Version: 6.0.6002.18005
Application Timestamp: 49e01da5
Fault Module Name: objc.dll
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 4a5f5419
Exception Code: c0000005
Exception Offset: 00008373
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160
Extra information about the problem
Bucket ID: 1454080905

HDMI stopped working - "compromised" - happened for the 2nd time

I have a Motorola set top box Model: QIP7232-P2. I have an older Sony HDTV (circa 2004) with only one HDMI input. I have 3 different things that use HDMI including the cable box. When I got the 3rd, I bought a cheap HDMI switch off ebay and hooked it up to my TV
Shortly after I got my HDMI switch my previous set top box stopped working (no HDMI video, but had audio via HDMI, and component video still worked) and Verizon support didn't know what to do so they sent me a new box.
After that I blamed the switch and decided to just swap cables by hand instead. Today I was swapping cables in and out again and the same thing happened. An error message came up that said the HDMI was compromised and I should just use component cables.
I see this thread from 2009 which seems similar: http://forums.verizon.com/t5/FiOS-TV-Technical-Assistance/HDMI-stopped-working-on-my-HD-DVR-yet-AGAI...
Are people still having this problem, or is it because I have such an old TV? Do newer TVs work better?
Rebooting and resetting the box doesn't seem to get it back into a working state. Is there any way to get it back to a working state? Am I stuck using component cables unless/until I replace the box, and then back in the same pit the next time a cable gets pulled out?

1. I've used one of the HDMI switches in the past. It was highly rated on Amazon, and wasn't cheap. It still caused weird and unpredictable problems. Unless you want to spend the money for a high quality switch, I would suggest not using them. You may get lucky, but I don't trust them.
2. Turn both the TV and the source off before you remove or insert an HDMI cable. There are some who say that's not necessary. I prefer to be safe.

Windows Powershell has stopped working

Hi,
I am getting an error during Windows logon, which says "Windows Powershell has stopped working". When I looked at the event logs, I found the below event in App logs. Can you pls help what is going wrong here?
Log Name:      Application
Source:        Application Error
Date:          2/18/2014 7:55:16 PM
Event ID:      1000
Task Category: Application Crashing Events
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      MININT-BNG69NS
Description:
Faulting application name: powershell.exe, version: 6.3.9600.16406, time stamp: 0x5244e9dc
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18229, time stamp: 0x51fb1677
Exception code: 0xe0434352
Fault offset: 0x000000000000940d
Faulting process id: 0xb3c
Faulting application start time: 0x01cf2cb52a860b9f
Faulting application path: C:\WINDOWS\System32\WindowsPowerShell\v1.0\powershell.exe
Faulting module path: C:\WINDOWS\system32\KERNELBASE.dll
Report Id: 7c4832cf-98a8-11e3-b82f-a088b40d3a94
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-02-18T14:25:16.000000000Z" />
    <EventRecordID>2449</EventRecordID>
    <Channel>Application</Channel>
    <Computer>MININT-BNG69NS</Computer>
    <Security />
</System>
<EventData>
    <Data>powershell.exe</Data>
    <Data>6.3.9600.16406</Data>
    <Data>5244e9dc</Data>
    <Data>KERNELBASE.dll</Data>
    <Data>6.1.7601.18229</Data>
    <Data>51fb1677</Data>
    <Data>e0434352</Data>
    <Data>000000000000940d</Data>
    <Data>b3c</Data>
    <Data>01cf2cb52a860b9f</Data>
    <Data>C:\WINDOWS\System32\WindowsPowerShell\v1.0\powershell.exe</Data>
    <Data>C:\WINDOWS\system32\KERNELBASE.dll</Data>
    <Data>7c4832cf-98a8-11e3-b82f-a088b40d3a94</Data>
</EventData>
</Event>
Arun

Hello Mike,
I have a script that is a part of HKCU Runonce, which is used to map D drive to indexing. Below is the script.
Write-Host Load the dll
Add-Type -path "C:\Program Files\Microsoft.Search.Interop.dll"
Write-Host Create an instance of CSearchManagerClass
$sm = New-Object Microsoft.Search.Interop.CSearchManagerClass
Write-Host Next we connect to the SystemIndex catalog
$catalog = $sm.GetCatalog("SystemIndex")
Write-Host Get the interface to the scope rule manager
$crawlman = $catalog.GetCrawlScopeManager()
$crawlman.AddUserScopeRule("file:///D:\*",$true,$false,$null)
$crawlman.SaveAll()
Write-Host Script completed
Arun

Windows sharing (smb) stopped working

Hello,
At work we have a huge network of windows computers. I access most of them on a daily basis, and there's one I'm connected to all the time, both to the filesystem and the windows printer.
All other computers work fine but this one in particular is giving me a headache. YEsterday, all of a sudden and with no configuration change on either my mac or the windows machine, samba stopped working.
When I'm asked my username and password, no matter what I type, I get a "unauthorised access". It didn't use to matter what I typed in there .. as long as the username field wasn't empty, the windows machine would accept it. Now it doesn't.
As I said, I can access other computers just fine.
Any ideas how to fix this?

This is so strange.
I created a user account on the Windows machine and I could access it through my mac.
10 minutes later I tried again and again the same error. Even though the user account and password are correct.

Windows accelorator driver stopped working

Every now and again I have a message which comes up saying Windows accelorator driver stopped working for Windows XP and has recovered. I have Windows 7 home premium so why would this message keep appearing every so often.

Is there any text before "windows acc...." in the error message? From the information supplied I would guess you are running W7 32bit and you've either upgraded from XP or you have loaded an XP grahics driver - I've only seen that sort of message from video drivers. I would check that either an updated Toshiba driver or a "WHQL" certified laptop driver is available from the graphics chipset's web site.

Internet explorer 9 for windows 7 has stopped working

I am getting internet explorer 9 for windows 7 has stopped working error and explore is getting closed

Have you disabled "Download Controls" in Manage add-ons?
Meanwhile, click Internet Options\Security\Custom level, then scroll down to ActiveX control and plug-ins, disable all precvious used ActiveX Control. then test again
Yolanda Zhu
TechNet Community Support

ITunes not working on my computer each time open iTunes appear a window " iTunes has stopped working close the program "

Hi, I have a problem with iTunes on my computer each time when try open iTunes appear a window " iTunes has stopped working... close a program " someone can help me how fix it.

See HT203206: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Keyboard not responsive in Win8.1 Login Screen (Normal/Safe mode)

Dear all professional in HP technical support team,
I had conduct upgrade from Window 8 to Window 8.1 last month, it work well without any problem until 4 days ago, the PC cannot start and stuck in HP logo and keep looping for 2 hours.
Then I try to boot in to Recovery mode, conduct dozens of Chkdsk command (chkdsk c: /R /X), turnout all bad sectors has been allocated and the Window finally can boot in to login screen.
However, I am unable to login to desktop since the USB HP wireless keyboard is not responsive, the USB HP wireless mouse work fine, and I am unable to activate 'On-screen Keyboard', I was manage to boot into safe mode, but it turnout the same, because the keyboard not responsive, I cannot input the password and login to both Normal and Safe mode.
I had try to attach a USB wired keyboard and USB wired mouse as well, it turnout the same, mouse is working and keyboard is not responsive.
The mouse and keyboard are working both recovery mode and BIOS environment.
Othe than Reset the PC, please advise is there anyway I can login to the desktop again, or I need to manually re-install the USB wireless keyboard driver from command prompt in Recovery mode.
Thanks for you help in advance.
Best Regard.
Bruch

Hi again Bruch2168,
Thank you for the quick reply!
Since you are not able to return to a previous restore point in recovery mode, I recommend returning your system back to a previous restore point. This can be done by following the steps in this document on Using Microsoft System Restore (Windows 8).
Should the problem continue, I suggest performing a backup and recovery of your operating system. This can be done by following the steps in this resource on Backing Up Your Files (Windows 8), as well as Performing an HP system recovery (Windows 8). This should return your system back to factory defaults.
If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Windows 7 HDMI stops working after login in normal boot. Safe modes work

Similar Messages

Maybe you are looking for