Windows 7 Home Premium 64-bit troubles

So ive been having troubles lately with my HPE-180a graphics card (nvidia gt230) and decided to replace it with a nvidia gt630. I uninstalled the previous drivers for the card, shut down the computer, then replaced with the new card. Everything went smoothly
and windows 7 booted in low resolution with a little driver update notification in the bottom corner. Once all the drivers were installed for the new card window's said it needed to reboot so I did. After rebooting Windows took 20 minutes to load up and the
following things were displayed:
'Failed to connect to a windows service' notification
Unable to use keyboard and mouse. Both connected by usb and can be detected in the BIOS settings. Mouse has power as the red light is on underneath.
No internet connection (ethernet).
At this point I decided to restore default setting in the BIOS. Still no difference.
So I boot up the computer again in safe mode, the mouse and keyboard still don't work.
I boot up again, press F8 and selected repair your computer. After selecting it I get the boot manager screen with error code 0xc00000f. I don't have the installation discs as I had a partition on my hard disk for windows recovery. (Ive used it once before)
I have linuxmint 15 installed aswell on the computer on the same hard disk and it works perfectly.
What can I do to fix this problem?

Hi,
Since this issue happens after you changed the graphic card but issue persists even you plugged in your old graphic card, so please make sure that all hardware components\ wires are fixed solid.
You can also try last known good configuration and see if it can helps
Using Last Known Good Configuration
http://windows.microsoft.com/en-in/windows/using-last-known-good-configuration#1TC=windows-7
Yolanda Zhu
TechNet Community Support

Similar Messages

Will my creative suite 3 program work on windows home premium 64 bit computer? I need to switch computers because my current pc is windows xp

will my creative suite 3 program work on windows home premium 64 bit computer? I need to switch computers because my current pc is windows xp

yes, though you may need to use compatibility mode to install.

Laserjet 4240n driver does not work with windows home premium 64 bit

I recently was given a HP laserjet 4240n by my employer to use in a remote office. I am using a Windows version 7 home premium 64 bit laptop. I have tried the HP install wizard - no support for this printer. I have tried downloading the "correct" driver - but that doesn't work either.
I assume that there is something wrong but I have spent hours and still haven't been able to figutre out what is wrong and how to fix it!
HELP!
Thanks,
Steve

Hello Steve04104,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Repeatedly asked to install Flash 11 on IE 9 Windows Home Premium 64 bit

From my admin account - I successfully install the latest version of Adobe Flash Player 11. Everything works fine (in that same admin account) until a system reboot. Then I receive messages from websites stating that they want me to install Adobe Flash. I do so and all is well until the reboot.
I have followed all the instructions on the Adobe main troubleshooting pages from uninstalling, rebooting, reinstalling, rebooting through the deletion of folders at run %appdat%\Adobe - Flash Folder and %\Macromedia and then uninstalling, rebooting, reinstalling etc.
Again, I receive a successful installation message and everything works properly until the reboot. Looks like a lot of users have had this problem, but I haven't found a clean answer. Thanks in advance for your thoughts.
I followed one suggestion and downloaded and ran Secunia PSI and found no older version of Flash Player installed. I do also have Adobe CS 5 Suite installed. I also started receiving messages from HP Solution Software that it would not operate until the latest version of Adobe Flash is installed. I uninstalled the HP software pending resolution. Uninstalls and reinstalls of Flash were not successful after removing the HP software either.

Hello, I too have experienced the repeating of installing Flash Player after performing a successful install. The PC is running Windows 7 Home Premium 64 bit, Internet Explorer 9.0.8112.16421, and Flash Player 11.4.402.265. The installation of the latest FP indicates a successfull install. Then when going to any site that uses FP, for example, weather.com, yahoo news, youtube, a message window indicates the latest FP needs to be installed.
I've went through the steps in thread 4613512 (FP uninstaller), 928315 (clean install), 987370 (permissions errors), the steps in this thread including deleting the %Appdata%\Macromedia folders prior to the install, removed references to Adobe 7 in the Windows registry (running Adobe 10.1.4). Also checked that Windows Media Player was not installed. It is not. All of the functions in the steps within these threads seemed to complete successfully. No errors or other problems were indicated. Would you have any suggestions on something else to try? Thank you.

Z - Windows 7 Home Premium 64 bit - new solutions for hotsync?

I am heartsick that my new operating system - Windows home premium 64 bit and my Palm Z22 won't sync.
I'm a little confused by all the computer speak any many of the posts were in 2009. (i.e. is Vista 64 bit, the same as Windows 7 64 it...as it relates to the problem?
What is an IRDA? (as in - using an IRDA to USB adapter to Hotsync a Z22 with a laptop running Vista 64.)
Is there a new solution out there?
Thanks,
mcgeesmail

An Ir adapter is a USB "dongle" - that is, it's a short USB cord with an IR "eye" on the end of it. You aim your Z22's port at this eye to make the connection (usually about 6" to 12" apart).
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Can I change the OS of Touchsmart 610 from Windows Home Premium to Windows 7 Pro?

I have 610 1100me system loaded with Windows Home Premium 64 bit. We bought it from Dubai and is in use in Pakistan. It started giving problems after few weeks of use. Its' hard disk makes noise and sometimes, system could not find boot disk. Most of the times blue screen of death and hanging issues. Any idea about this issue and how to fix it? My observation is that the culprit is hard disk!
Also, can I change its OS to Windows 7 Pro or ultimate (32 or 64 bit)? Where can I find all drivers for Pro or Ultimate?
Many thanks for your valueable advice.
Regards,
KK
This question was solved.
View Solution.

Hi,
Nearly nothing change interms of drivers required for Windows 7 (HP, Pro, Ultimate) unless you switch from 64 to 32 bit. You can reuse your current HP 64 bit drivers for 64 bit W7 Pro or Ultimate.
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I have a HP Pavillion DV61355dx windows 7 home premium 64 bit sp1

Hi I have a HP Pavillion DV6-1355 dx windows 7 Home premium 64 bit and I have some major issues ,first when I bought this computer I turned it on it automatically connected and downloaded a whole bunch of stuff I am not even sure what all ,my P/N #VM222UA#ABA , S/N [Personal Information Removed] I dont even know what should and shouldnt be on here anymore . It has a sticker in keyboard area at bottom right corner and a windows 7 sticker says Intel Duo core and yet I get troubleshooters refering to Vista ,AMD ,and several other computers .In my device manager it has a bunch of stuff with little yellow gears .I feel it has down loaded my old computers which I dont have but 1 and my current ones which are all windows 7 64 bit . I was gong to scare my husband by starting his prinnter from mine wasnt even sure what I was doing but I do remeber it saying that I would have to be in control over the pcs I cant remember exactly and I also wanted to make sure updates were done because my husband never did them so I thought great they will get regular updates. At that time we had 3 windows xps 1 professional 64 bit,1 hp media center 2005 64 bit and a windows xp home edition 32 bit .I didnt know much about pcs then I sought help but never got it resolved we had a differnt router and i beleave sbc global at time when I did it that computer ended up dieing so I no longer have it but yet I see its hardware listed and I see the AMD listed and SIS and Matrix with dates going back to 2003 and this computer is a 2009 . What I need to know is how to get all the stuff off here that dont belong and the true specs for this notebook we have att now and a cisco E1000 router and I know some how that the stuff from the other computers are on here .Even when I go to the HP support page it will refer to older editions of windows troubleshooters it says under collection information that computer name is LAPTOP which i put down for the other windows 7 with a amd so I could identify the different windows 7 home premiums and I listed this dv6 as laptop .Windows version says 6.1 architecture says amd64. under publisher details it says package version 1.0 publisher Microsoft Windows,network adapter 1.0 Microsoft corporation. PLEASE HELP

Hi lustyln,
I'm having a little trouble understanding all of what you are trying to explain. From what I can tell, it sounds like your PC has a lot of software problems and you want to know what is supposed to be there and what isn't.
For reference, here are your product specifications:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01893242&lc=en&product=4043282
To get your PC software back to how it was when it was first purchased, run a system recovery:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&product=4043282
I hope this helps.
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

I am using Windows 7 Home Premium 64-bit OS. I've never had this problem before... today I opened iTunes and it prompted me to download the newest version. I use iTunes all the time and have updated it multiple times with no issues. During the installa

I am using Windows 7 Home Premium 64-bit OS.I've never had this problem before... today I opened iTunes and it prompted me to download the newest version. I use iTunes all the time and have updated it multiple times with no issues. During the installation process it gave me an error message that said:
Runtime error!
Program C:\Program Files\iTunes.exe
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I quit the installation, uninstalled iTunes and rebooted my computer. I now receive a similar message with a slight difference:
Runtime error!
Program C:\Program Files (x86)...
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I did not leave anything out from the error message. It doesn't point to a specific file, it just ends with "(x86)..." Every time I boot up my computer, this error message pops up on my desktop.
How do I repair this issue? I have found multiple suggested solutions but am unsure which one is the best, and I don't want to try a bunch of different things for fear I may make the problem worse. I would like to try and fix this myself if possible but I need to know if that is really possible or if I need to take my computer to someone for repairs. Any suggestions will be greatly appreciated!!

Hi lustyln,
I'm having a little trouble understanding all of what you are trying to explain. From what I can tell, it sounds like your PC has a lot of software problems and you want to know what is supposed to be there and what isn't.
For reference, here are your product specifications:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01893242&lc=en&product=4043282
To get your PC software back to how it was when it was first purchased, run a system recovery:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&product=4043282
I hope this helps.
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

Oracle 11g client installation on Windows 7 Home Premium (64-bit)

I'm having trouble installing the Oracle 11g client installation on Windows 7 Home Premium (64-bit) machine.
Can Oracle 11g client even be installed on the Windows 7 Home Premium 64?
Thanks!

Hi;
As mention here home OS not supported, so as mention here again if you make some googling you can find link&blog which is mention to create WM machine, install linux(you can use OEL linux which is free and can be download from e-delivery site) than you can make 11g installation on it
Regard
Helios

HP CQ41-224 TX : HP Quick Launch Button did not funtion on Windows 7 Home Premium 64 bit

Hello,
I have bought a new notebook HP CQ41-224TX without OS (free dos) and upgrade the momory to 4 Gb.
I have installed this notebook with Windows 7 Home Premium 64 bit and all HP CQ41-224TX driver 64 Bit.
All function on this notebook running well accept Fn+F7 and Fn+F8 (for brightness) do not work.
I have reinstall the HP Quick Launch Button, but nothing changed.
Does Anyone has this problem.? and how to solve this problem.. pls let me konw. Thanks
Regards
Febrianr

Hi lustyln,
I'm having a little trouble understanding all of what you are trying to explain. From what I can tell, it sounds like your PC has a lot of software problems and you want to know what is supposed to be there and what isn't.
For reference, here are your product specifications:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01893242&lc=en&product=4043282
To get your PC software back to how it was when it was first purchased, run a system recovery:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&product=4043282
I hope this helps.
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

Tx2517ca From Windows Vista Home Premium 32-bit to Windows 7 Professional 32-bit

Hi Everyone,
I have a very specific question. I currently am running Windows Vista Home Premium 32-bit, but I want to use Windows 7. However, I want to use Windows 7 Professional 32-bit (rather than Windows 7 Home Premium) and understand that this will require a clean install.
Before I purchase Windows 7 Professional, I want to make sure that this can be done correctly. Does anyone know if this is possible or have already done this?
I have downloaded and ran Windows 7 Upgrade Advisor which told me that I would be able to upgrade to Windows 7 Home Premium or Ultimate, but it does not mention Windows 7 Professional at all. I'm assuming this is because it would require a clean install.
Thanks for your time,
Lauren

thanks ... I see now from your other post that you're probably getting either a "missing QuickTime.msi" message or being told that a "newer version of QuickTime" is installed when you try to go ahead and uninstall QuickTime after you're told about the Key?
Unfortunately, these sorts of msi-related troubles have gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly this time?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

Hi all! I was updating the software on i pad to ios6, update was interrupted(apple update server is unavailable...). iTunes Diagnostics shows that "secure link to I tunes store failed". I use Windows 7 Home Premium 64 bit. Can anybody help please?

Hi all! I was updating the software on i pad to ios6, update was interrupted(apple update server is unavailable...). iTunes Diagnostics shows that "secure link to I tunes store failed". I use Windows 7 Home Premium 64 bit. Can anybody help please?
The following was done so far:
1. Windows Firewall - new rule created for itunes.
2. iTunes - latest version installed.
3. LAN setting : automatic detection of proxy is enabled;
4. iTunes diagnostics shows:
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
TOSHIBA Satellite L655
iTunes 11.0.2.26
QuickTime 7.7.3
FairPlay 2.3.31
Apple Application Support 2.3.3
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.1.0.13
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 003FB880034B7720
Current user is not an administrator.
The current local date and time is 2013-04-23 11:01:14.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.0.2.26 (x64) is currently running.
iTunesHelper 11.0.2.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {1CB5BBC2-8124-4664-899A-CE0A4683E3B4}
Description:          Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Thu Jan 01 08:00:00 1970
Lease Expires:          Thu Jan 01 08:00:00 1970
DNS Servers:
Adapter Name:          {8140112A-43D0-41D6-8B36-BE146C811173}
Description:          Atheros AR8152/8158 PCI-E Fast Ethernet Controller (NDIS 6.20)
IP Address:          10.5.7.196
Subnet Mask:          255.255.0.0
Default Gateway:          10.5.0.1
DHCP Enabled:          Yes
DHCP Server:          172.18.255.2
Lease Obtained:          Tue Apr 23 10:14:40 2013
Lease Expires:          Tue Apr 23 22:14:40 2013
DNS Servers:          121.97.59.7
                    121.97.59.2
                    121.97.59.3
Active Connection:          LAN Connection
Connected:          Yes
Online:                    Yes
Using Modem:          No
Using LAN:          Yes
Using Proxy:          No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was unsuccessful.
The network connection timed out.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
Last successful iTunes Store access was 2013-03-22 10:05:31.
@@@. iTunes IS ENABLED THROUGH THE FIREWALL , even though diagnostics says "NOT enabled"

hours after the first post i somehow got this to work. dont know how, but i do tried the dns clear cache, the clear host file, oh and i did the check automatically detech dns AND THEN se-check it again before i got this to work.

Can I install and use XE on Windows 7 Home Premium 32 bit?

I would like to install Oracle XE as a learning tool but have Windows 7 Home Premium 32 bit which I see in the installation guide is not supported. I guess the answer therefore is to upgrade to Windows 7 Professional which the XE Installation Guide says is supported.
I have checked various forums and there seems to be some varying opinions on this. Before I go ahead and upgrade to Windows 7 Professional, can someone advise the best course of action please?

Good luck, managing the rdbms has many challenges.
The full 11g documentation can be quite helpful, even though XE has a subset of the SE or EE options, and going through the XE 2-Day DBA pages is good reading as well.
11g library: http://www.oracle.com/pls/db112/portal.all_books
2 Day DBA: http://docs.oracle.com/cd/E17781_01/server.112/e18804/toc.htm

I am running IE 11 on Windows 7 Home Premium 64 Bit Service Pack 1. When I attempt to install Flash Player, it goes through all of the steps, tells me the player is installed, and welcomes me. I cannot open the player and it does not appear in the Start M

I am running IE 11 on Windows 7 Home Premium 64 Bit Service Pack 1. When I attempt to install Flash Player, it goes through all of the steps, tells me the player is installed, and welcomes me. I cannot open the player and it does not appear in the Start Menu, Task Manager, System Tray, or anywhere else. When I try to open a file, the site tells me Flash player is not installed. I have even downloaded it to a separate folder and ran the install with IE shut down completely. And Shockwave in ENABLED but in 32 bit .I have been trying to get this to work for about 3 weeks now. HELP!!!

Flash Player is a browser add-on, not an executable program.
If you need to open a local SWF file you will need the standalone player (Projector) from http://www.adobe.com/support/flashplayer/downloads.html
Note that the download is the player, not an installer, so you will need to make the file association manually.

Illustrator 15.0.2 extremely slow on Windows 7 Home Premium 64-bit

Illustrator has been working nicely on my computer up until the 15.0.2 upgrade. Now it chugs along at a snails pace and locks up/hangs frequently when switch between tools or windows.
My system specs are:
Windows 7 Home Premium 64-bit
Intel i7 Q720 processor
6GB RAM
1GB ATI video card
Is anybody else experiencing extremely slow performance with the 15.0.2 upgrade?

I am having a suspisciously similar issue and I would like to elaborate a bit..
I too have this odd issue where Illustrator works ok (though screen redraw lags) but as soon as I go between programs, whether Notepad, Acrobat or similar simple programs - Illustrator freezes for 5-10 seconds. I go back and forth a lot - looking through documents (pdfs etc.) when I draw so the annoyance is simply unbearable.
I have used Illustrator for ages and roughly 6 months ago I bought a new PC to use at home. Its specs are:
OS: Windows 7 Pro 64 bit
PROC: Intel i7 930
RAM: 12 GB OCZ PLATINUM
GFX: ATI RADEON HD 5870
MOBO: P6X58D
These specs thrashes my specs at work by far and yet Illustrator BOTH CS4 and CS5 runs smooth and hazle free at the old worn out computer at work, while being close to useless at home. I have googled my eyes out and found no solution. Tried clearing the prefs, etc. - which made no difference. Disabled Aero and all other gfx consuming stuff - with absolutelu no improvement. I have even tried flagging Illustrator CS5 as Large Adress Aware... didn't help
I can run all other Adobe CS4 and CS5 (master edition) very good!
Can someone help - I am desperat

Windows 7 Home Premium 64-bit troubles

Similar Messages

Maybe you are looking for