Windows 7 Home Premium Activation Problem

Dear Forum Admin,
Cannot activate my new copy of OEM Windows 7 home premium.
Kindly resolve this issue before this becomes a legal issue.
Thank you.

Dear Forum Admin,
Cannot activate my new copy of OEM Windows 7 home premium.
Kindly resolve this issue before this becomes a legal issue.
Thank you.
Post your issue to the Windows
7 Genuine Issues forum. Here are the instructions on how to produce a diagnostic:
MGA
Diagnostic Report:
To properly analyze and solve problems with Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
Once downloaded, run the tool.
Click on the Continue button, after a short time, the Continue button will change to a Copy button.
Click on the Copy button in the tool (ignore any error messages at this point), and then paste (using either r-click/Paste, or Ctrl+V ) into your post.
One
Issue Per Thread:
Most Activation and Validation issues look the same, on the surface, but can have many different causes and fixes. This is why we ask for a diagnostic report and this is also why we ask that you create your own thread for your issue (in other words, don't post
your issue in another person's thread).
It just becomes too complicated to try to troubleshoot multiple different issues in the same thread.
Please do not read this sentence. Please ignore the previous sentence.

Similar Messages

G575 Windows 7 Home Premium activation problem and easy camera wont work

I have bought the G575 a month ago for my parents and everything was fine but yesterday i looked at the laptop and the camera was not working and the windows was not activated. I tried to activate it online by providing the windows key at the bottom of the laptop but it didn't work. Later i saw that the camera was not working and i tried to install the driver for it from the lenovo website and the installation failed saying that the device can't be discovered. I opened the device manager and tried to install the drivers trough the windows update and it failed saying that the drivers are found but the file is not found for the usb composite device. Any suggestions how the problems can be resolved?

Hello saso and welcome to community,
You need to enable the camera by Fn+Esc key and then install the camera driver.
If you have received the pre-loaded Windows 7 with the laptop it comes as activated. If there is issue with pre-installed Windows 7 then you need to reinstall the Windows with OneKey Recovery
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Windows 7 home premium update problem

I have geniune windows 7 home premium on my sony vaio laptop but now a days it fails to update after 16 % it reverts and restart but before this it was updating successfully this problem comes in the last days of August 2012 and still have please help,
is there security center problem of MS or my windows problem it shows some error codes and sometime it never shows and when it shows error code it is 643 i try to find on net and try many troubleshooting methods with the help of ms help center but fails please
reply me on my email [email protected]

Hi,
First of all, let us run a Windows Update troubleshooter.
http://windows.microsoft.com/en-us/windows7/Troubleshoot-problems-with-installing-updates
Then, please follow the steps from the link above to fix the issue.
If the issue persists, let us check the following services and make sure they were turned on.
Background Intelligent Transfer Service
Cryptographic Services
Windows Modules Installer
Windows Installer
Windows Update
Kim Zhou
TechNet Community Support

Windows Vista Home Premium activation error (invalid key)

Someone can help me about the error in subject? I put the key suplied in the notebook, and always I have a error to activate.
Regards,
renato.

Hi,
you did not mention if you recovered your machine with an original recovery media or just installed a original Windows, so I agree with snipe: a recovery does not need a key, because its already activated.
Would appreciate some feedback from you.
Cheers

Satellite A215-S5849/Windows Vista Home Premium /software problem

My Microsoft Works 9 that came installed on my laptop is freezing about a minute when you open the word processor. The spreadsheet and task launcher open normally. Can anyone help me?
Thanks, Billy

I am sorry, I forgot to say that I deleted works. Then I reinstalled it again. Can I just reinstall the works program from the recovery cd to the original program?
thanks,billy

Windows 7 Home Premium 64 Bit activation problems ( 0xC004E003 )

I just fixed my old computer that crashed years ago (windows xp). Windows 7 Home Premium works find just cant get it to activate every time i enter the key it loads all the way then I get an error code ( 0xC004E003 ). What can I do to fix?
Calling is my last resort, would rather fix it myself it i can. Thanks for the help
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-WJ2H8-R6B6D-7QJB7
Windows Product Key Hash: ckKNc+BBPDWmo1LUlOkraNjlQ34=
Windows Product ID: 00359-OEM-8992687-00006
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7600.2.00010300.0.0.003
ID: {EEBFD553-F264-434F-AC45-43BB451023CF}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Home Premium
Architecture: 0x00000009
Build lab: 7600.win7_gdr.130318-1532
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0x80070003]
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{EEBFD553-F264-434F-AC45-43BB451023CF}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7600.2.00010300.0.0.003</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-7QJB7</PKey><PID>00359-OEM-8992687-00006</PID><PIDType>2</PIDType><SID>S-1-5-21-3530049531-990722489-403183375</SID><SYSTEM><Manufacturer>TOSHIBA</Manufacturer><Model>TOSHIBA
NB305</Model></SYSTEM><BIOS><Manufacturer>TOSHIBA</Manufacturer><Version>V1.70</Version><SMBIOSVersion major="2" minor="5"/><Date>20100603000000.000000+000</Date></BIOS><HWID>28B80600018400F4</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Pacific
Standard Time(GMT-08:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>TOSCPL</OEMID><OEMTableID>TOSCPL00</OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7600.16385
Name: Windows(R) 7, HomePremium edition
Description: Windows Operating System - Windows(R) 7, OEM_SLP channel
Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00359-00178-926-800006-02-1033-7600.0000-1792014
Installation ID: 004340207783200440619671618666908095134880096383555685
Processor Certificate URL:
Machine Certificate URL:
Use License URL:
Product Key Certificate URL:
Partial Product Key: 7QJB7
License Status: Initial grace period
Time remaining: 34680 minute(s) (24 day(s))
Remaining Windows rearm count: 3
Trusted time: 6/28/2014 2:13:58 AM
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: N/A
HealthStatus: 0x0000000000000000
Event Time Stamp: N/A
ActiveX: Not Registered - 0x80040154
Admin Service: Not Registered - 0x80040154
HealthStatus Bitmask Output:
HWID Data-->
HWID Hash Current: MAAAAAAAAgABAAIAAAABAAAAAwABAAEAJJSuiap2fsomcAz/6OuS20IH1vL0FnIZ
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x20001
OEMID and OEMTableID Consistent: yes
BIOS Information:
ACPI Table Name OEMID Value OEMTableID Value
APIC   TOSCPL  TOSCPL00
FACP   TOSCPL  TOSCPL00
HPET   DELL   M09
BOOT   TOSCPL  TOSCPL00
MCFG   INTEL   CRESTLNE
TCPA   Phoeni  x
SLIC   TOSCPL  TOSCPL00
SSDT   PmRef  Cpu0Tst
SSDT   PmRef  Cpu0Tst
SSDT   PmRef  Cpu0Tst

Hi,
the error code 0xC004E003 simply means the Software Licensing Service reported that license evaluation failed.
Please take a try with the option Change product key, then enter your original product key again.
Follow the steps below:
Click Start, click
Computer, and then click System properties on the toolbar.
In the Windows activation section, click the Change product key. If you are prompted for an administrator password or for confirmation, type your password, or click
Continue.
In the Product key box, type the product key, and then click
Next.
Note Use your original product key.
Follow the steps in the Windows Activation Wizard to complete the activation process.
More detailed information, is talked in the below KB article:
Error message when you try to activate Windows 7 or Windows Vista: "An error has occurred"
EDIT: Regarding license issue, please make a contact with your local
Microsoft customer support for better assistance.
Thank you for your understanding
Hope this may help
Best regards
Michael Shao
TechNet Community Support

Windows 7 Home Premium with 802.1x problems with the Authentication

We have problems with OS Windows 7 Home Premium 802.1x, the message in ACS:
EAP-TLS or PEAP authentication failed during SSL handshake
ACS v4.1
We have OS Windows 7 Professional and doesn´t have problems with the authentication.
I hope that you can help me
Regards

We were investigated with specialist people of OS Windows and the conclusion was that the Home Premium Version has restrictions about authentication and domain (Active Directory). So we need change the version of OS (Proffessional for example).
If you had another tip, please tell me and I try it for resolve this issue, if not we have to change the OS.
Regards

Problem on Windows 7 Home Premium cant open program for using codes like visual studio 2012

I have problem my windows 7 Home Premium because of visual studio 2012..I can't open even in several times, I don't know what happen, and sometime it is so low to process whenksn it to open my laptop..Why is that pleas do reply..ASAP! tha

Hi,
According to your description, it seems like VS itself problem, you can try to repair this program through Control Panel for test. If no use, it would be better to post your question at VS forum for further assistance.
Contact VS forum:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=visualstudio%2Cvsarch%2Cvsdbg%2Cvstest%2Cvstfs%2Cvsdata%2Cvsappdev%2Cvisualbasic%2Cvisualcsharp%2Cvisualc
Roger Lu
TechNet Community Support

I am using Windows 7 Home Premium 64-bit OS. I've never had this problem before... today I opened iTunes and it prompted me to download the newest version. I use iTunes all the time and have updated it multiple times with no issues. During the installa

I am using Windows 7 Home Premium 64-bit OS.I've never had this problem before... today I opened iTunes and it prompted me to download the newest version. I use iTunes all the time and have updated it multiple times with no issues. During the installation process it gave me an error message that said:
Runtime error!
Program C:\Program Files\iTunes.exe
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I quit the installation, uninstalled iTunes and rebooted my computer. I now receive a similar message with a slight difference:
Runtime error!
Program C:\Program Files (x86)...
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I did not leave anything out from the error message. It doesn't point to a specific file, it just ends with "(x86)..." Every time I boot up my computer, this error message pops up on my desktop.
How do I repair this issue? I have found multiple suggested solutions but am unsure which one is the best, and I don't want to try a bunch of different things for fear I may make the problem worse. I would like to try and fix this myself if possible but I need to know if that is really possible or if I need to take my computer to someone for repairs. Any suggestions will be greatly appreciated!!

Hi lustyln,
I'm having a little trouble understanding all of what you are trying to explain. From what I can tell, it sounds like your PC has a lot of software problems and you want to know what is supposed to be there and what isn't.
For reference, here are your product specifications:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01893242&lc=en&product=4043282
To get your PC software back to how it was when it was first purchased, run a system recovery:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&product=4043282
I hope this helps.
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

I can't synchronize my iPod's with my iTunes software (Windows Vista Home Premium) due to problems with the access authorization / rights for this operation

Hi there,
I'd like to ask you something:
I'm trying to synchronize all my iPod's (I have as many as 4 iPods: 2 iPod touch a 8 GB each and 2 iPod classic a 160 GB each) with my iTunes software (Version 11.3.1 which is installed on a Windows PC (Windows Vista Home Premium)). Unfortunately, the iTunes software refuses to run the command "synchronize with the iPod connected" regarding each and every iPod I have. iTunes just declares:
Synchronizing is impossible because I wouldn't hold the access authorization / rights for this operation.
I uploaded the songs at issue to my iTunes folder from CD's (all songs are in AAC format now).
What is this access authorization, why was something like that invented and what can I do to get it?
How do I have to proceed in detail?
What would it cost?
I am brand new here and have never ever made a post in any support community anywhere in the world in my life. Well, and I am not excessively knowledgeable about the particular computer or mac language but I know the very basics or can find out about them.
Anyways - can you help me please?
If you can't help me, who can do so?
It would be nice if you could answer me as soon as possible!
Thank you guys
Prying Pedro

Yes, others have experienced the problem, a simple search of the forums would have revealed that and the simple solution.
Termporarily disable any security software on the computer.

Sync problem itunes 11.1.5.5 iphone 5 Version 7.1 (11D167) Windows 7 Home premium Outlook 2010 contacts calendar

I'm no longer able to sync contacts, calendar or notes from my computer's Outlook using iTunes. For a while I was getting a message that the server could not be reached for resolving conflicts - probably got that message every sync for a month or so and just ignored it. Then I followed online instructions for dealing with that problem and renamed the file conflicts.syncconflict. The instructions suggested that this would cause creation of a new conflicts.synconflict file, which it did. But then the sync just seemed to hang on the contacts portion of syncing, even if I left it for a couple of hours. So I renamed the old file back to conflicts.synconflict.
Now sync doesn't work at all for me if I try to sync any of Outlook contacts, calendar or notes. If I disable all those, the sync works for things like apps, etc.
I have already tried:
     checking latest version of iPhone software
     in iTunes, clicking edit / preferences/ devices / reset sync history (not sure whether this button really does anything or not)
     using outlook's scanpst.exe to check for corruption of my main outlook files and most of my ancillary folders
     resetting the iPhone (pressing the button upper right and the circular button at the bottom for several seconds)
     trying the sync after rebooting the computer and not turning on Outlook in the interim
The present symptom is that the attempted sync just hangs on the syncing contacts stage, and won't complete. I can cancel the sync, but I can't complete it (unless I uncheck syncing with all the Outlook data). I'm not getting any error message.
This is what I'm using:
          iPhone 5
          iTunes version 11.1.5.5
          iPhone software Version 7.1 (11D167)
          Windows 7 Home premium
           Outlook 2010
          Asus G74SX computer
It is March 27, 2014.
Suggestions welcome. I'd like to be able to sync my contacts and calendar.

Hey Steve,
I had this problem as well and found a way how to solve this:
You need to reset your iPhone by pressing the Home button and the Power button simultaneously until the iPhone reboots.
After it rebooted I unlocked the phone, connected it to my PC and ran the iTunes sync without any problems.
Hope this helps with your issue as well.
Best
Alex

Cannot install itunes 11.1.3 to my windows vista home premium 32-bit. After it finishes the download that it verifies the file I get a message saying "this file cannot be downloaded". What could the problem be??? I uninstalled my itunes and tried again

Cannot install itunes 11.1.3 to my windows vista home premium 32-bit. After it finishes the download that it verifies the file I get a message saying "this file cannot be downloaded". What could the problem be??? I uninstalled my itunes and tried again and keep getting the same message. Please help !

See Troubleshooting issues with iTunes for Windows updates.
For downloading issues see the further information area and use a different browser and/or the direct links.
tt2

I have a problem, my pc doesnt open itunes windows vista home premium

i have a problem my pc doesnt open itunes , i have windows vista home premium.

Hello jcrivasjc,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Best of luck,
Mario

I have a problem with the iTunes Store, I have an ipod and an iphone 2. I have a PC with Windows Vista Home Premium 2007, entering into iTunes Store on the main screen I get only AppStore, Podcast and iTunesI have a problem with the iTunes Store, I have a

I have a problem with the iTunes Store, I have an ipod and an iphone 2. I have a PC with Windows Vista Home Premium 2007, entering into iTunes Store on the main screen I get only AppStore, Podcast and iTunes U. In my screen I get only ipad2 Podcast, iTunes U Downloads. My problem is I can not access any application to download music, videos, books, etc..
ITunes will be installed wrong or what should I do to activate these options?

Go to the front page of the Store, and click Change Country. Make sure it is set to the country where you actually are.
Then you will be able to see everything that is for sale in your country, which, depending where you live, might or might not include music.

Windows 7 Home Premium Administrator login problem

I have two user accounts on my PC (running Windows 7 Home Premium). My profile is set as "the administrators profile" and I work and save everything on this profile.
It's been working great till 2 weeks ago. I switch on the PC, it was giving the options to log into either one of the profiles, and I chose my profile as always. It then gave me an error saying: "The user profile Service Failed the logon. User profile
cannot be loaded" It doing that eversince and I just can't log into that profile.
I'm able to log into the other user account, but not being the administrator I can't access all my files or do any downloads. If I'm working in the other account and do download for instance, it will ask me for the administrators password. When entering
it, its not reacting or recognizing the password at all.
Please could you let me know how to recover the administrators profile?

Hi,
If there is another administrator account that you can log into, Please try the following methods directly:
Method 1: Fix the user account profile
Method 2: Log on to Windows and copy your data to a new account
Method 3: Delete the error SID and create a new profile
However, if you can't get to any administrator account, follow these steps:
1. Restart your computer and hit F8 multiples times until you see a menu-like screen, if you see the Windows splash screen then repeat this step;
2. Highlight and hit enter on Safe Mode with Command Prompt. Try logging in there.
3. If you are able to login, once a command prompt pops up, type:
net user administrator password /active:yes (you can specify whatever password you want for the administrator account.)
4. If you get a message saying "The command completed successfully", then restart your computer by typing: shutdown -r;
5. Boot up again pressing F8, but this time choose just Safe Mode;
6. You will be able to login as Administrator with the password you set in Step 3;
7. Then try that methods above.
For more detailed information, please refer to this article below:
You receive a "The User Profile Service failed the logon” error message
http://support.microsoft.com/kb/947215
Karen Hu
TechNet Community Support

Windows 7 Home Premium Activation Problem

Similar Messages

Maybe you are looking for