Windows 7 home premium update problem
I have geniune windows 7 home premium on my sony vaio laptop but now a days it fails to update after 16 % it reverts and restart but before this it was updating successfully this problem comes in the last days of August 2012 and still have please help,
is there security center problem of MS or my windows problem it shows some error codes and sometime it never shows and when it shows error code it is 643 i try to find on net and try many troubleshooting methods with the help of ms help center but fails please
reply me on my email [email protected]
Hi,
First of all, let us run a Windows Update troubleshooter.
http://windows.microsoft.com/en-us/windows7/Troubleshoot-problems-with-installing-updates
Then, please follow the steps from the link above to fix the issue.
If the issue persists, let us check the following services and make sure they were turned on.
Background Intelligent Transfer Service
Cryptographic Services
Windows Modules Installer
Windows Installer
Windows Update
Kim Zhou
TechNet Community Support
Similar Messages
-
Unable to install windows 7 home premium updates error code 643 (KB 954430, KB973688 & KB2538243)
Unable to install windows 7 home premium updates error code 643 (KB 954430, KB973688 & KB2538243) - Please help me!!
I'm running Windows 7 Home Premium 64-bit on a Lenovo ThinkPad E530. This laptop is only brands new.
KB954430, KB973688 & KB2538243 - These three updates keep giving me problems. In Windows Update, under "view update history" these keep showing up as failed. I also get the error, "Code 643".
At the end of the installation it tells me three updates are failed to be installed and when I shut down to try to update, Windows always configures up to ~15%, then fails, and reverts changes, then prompts me to install updates the next time I turn my computer on. Each time, I have to re-install every update that I had installed prior to shutting down.
I went through Trouble shooter - "Fix it" numerous times, Repaired Net framework profile and also followed few instructions I found from the net such as running "Reset Register Windows update Components" but nothing works so far.
I even tried manually installing KB954430 but it told me "An error occurred during the installation of assembly component. 7B30B69B-OE6C-B7EO-A06B-D6B9ABF34537 HR RESULT: 0 x 80070BC9" and the installation bar seems to stop at "Publishing Product information", then rolls back the installation.
If you need more details, please tell me & Thanks in advanceCheckout this Microsoft article: http://support.microsoft.com/kb/976982
It has some resolution steps that may help.
Thank you for being a part of the Lenovo Family,
Catie
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Donate KUDOS and Click "Accepted Solution" -
Windows 7 Home Premium Activation Problem
Dear Forum Admin,
Cannot activate my new copy of OEM Windows 7 home premium.
Kindly resolve this issue before this becomes a legal issue.
Thank you.Dear Forum Admin,
Cannot activate my new copy of OEM Windows 7 home premium.
Kindly resolve this issue before this becomes a legal issue.
Thank you.
Post your issue to the Windows
7 Genuine Issues forum. Here are the instructions on how to produce a diagnostic:
MGA
Diagnostic Report:
To properly analyze and solve problems with Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
Once downloaded, run the tool.
Click on the Continue button, after a short time, the Continue button will change to a Copy button.
Click on the Copy button in the tool (ignore any error messages at this point), and then paste (using either r-click/Paste, or Ctrl+V ) into your post.
One
Issue Per Thread:
Most Activation and Validation issues look the same, on the surface, but can have many different causes and fixes. This is why we ask for a diagnostic report and this is also why we ask that you create your own thread for your issue (in other words, don't post
your issue in another person's thread).
It just becomes too complicated to try to troubleshoot multiple different issues in the same thread.
Please do not read this sentence. Please ignore the previous sentence. -
G575 Windows 7 Home Premium activation problem and easy camera wont work
I have bought the G575 a month ago for my parents and everything was fine but yesterday i looked at the laptop and the camera was not working and the windows was not activated. I tried to activate it online by providing the windows key at the bottom of the laptop but it didn't work. Later i saw that the camera was not working and i tried to install the driver for it from the lenovo website and the installation failed saying that the device can't be discovered. I opened the device manager and tried to install the drivers trough the windows update and it failed saying that the drivers are found but the file is not found for the usb composite device. Any suggestions how the problems can be resolved?
Hello saso and welcome to community,
You need to enable the camera by Fn+Esc key and then install the camera driver.
If you have received the pre-loaded Windows 7 with the laptop it comes as activated. If there is issue with pre-installed Windows 7 then you need to reinstall the Windows with OneKey Recovery
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Satellite A215-S5849/Windows Vista Home Premium /software problem
My Microsoft Works 9 that came installed on my laptop is freezing about a minute when you open the word processor. The spreadsheet and task launcher open normally. Can anyone help me?
Thanks, BillyI am sorry, I forgot to say that I deleted works. Then I reinstalled it again. Can I just reinstall the works program from the recovery cd to the original program?
thanks,billy -
Looking for Upgrade Disk: 32bit, Vista to Windows 7 Home Premium
Hi,
Computer novice here. Accidently ordered x64bit and need the x32.
Best case scenario:
Anyone in the Cumming GA area who could let me borrow their upgrade disc?
Spoke to Lenovo help and they said can't send me the correct disk becuse the upgrade program has ended. OK to use someone elses upgrade disc though as it's based on the serial number (?) in computer.
2nd best case scenario:
Would someone be willing to mail me the disc to borrow?
Thanks in advance,
CJ
P.S. I have an A600 if that matters with Vista x32.
P.S.S. Oops! I need the Windows 7 Home Premium update disc x32. ThanksOk, I tried this and it said I needed to download and install Nvidia graphics driver version 309.08, I downloaded and installed this version just fine. I done option 2 again and now it says download and install version 353.30. I download this version but got an error when I tried to install it that says THIS GRAPHICS DRIVER COULD NOT FIND COMPATIBLE GRAPHICS HARDWARE. Do you know what I should do now to fix this?
-
I am using Windows 7 Home Premium 64-bit OS.I've never had this problem before... today I opened iTunes and it prompted me to download the newest version. I use iTunes all the time and have updated it multiple times with no issues. During the installation process it gave me an error message that said:
Runtime error!
Program C:\Program Files\iTunes.exe
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I quit the installation, uninstalled iTunes and rebooted my computer. I now receive a similar message with a slight difference:
Runtime error!
Program C:\Program Files (x86)...
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I did not leave anything out from the error message. It doesn't point to a specific file, it just ends with "(x86)..." Every time I boot up my computer, this error message pops up on my desktop.
How do I repair this issue? I have found multiple suggested solutions but am unsure which one is the best, and I don't want to try a bunch of different things for fear I may make the problem worse. I would like to try and fix this myself if possible but I need to know if that is really possible or if I need to take my computer to someone for repairs. Any suggestions will be greatly appreciated!!Hi lustyln,
I'm having a little trouble understanding all of what you are trying to explain. From what I can tell, it sounds like your PC has a lot of software problems and you want to know what is supposed to be there and what isn't.
For reference, here are your product specifications:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01893242&lc=en&product=4043282
To get your PC software back to how it was when it was first purchased, run a system recovery:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&product=4043282
I hope this helps.
...an HP employee just trying to help where I can, but not speaking on behalf of HP. -
Since updating to LR5.5 it crashes about every 5-10 images while working in the development module. Computer is PC Windows 7 Home Premium. I have been using this computer for several years with zero problems. Is this related to the updating? What is the fix?
Do you get an error message? If so, what does it say?
Do you get a Blue Screen?
Does something else happen? -
Cannot install itunes 11.1.3 to my windows vista home premium 32-bit. After it finishes the download that it verifies the file I get a message saying "this file cannot be downloaded". What could the problem be??? I uninstalled my itunes and tried again and keep getting the same message. Please help !
See Troubleshooting issues with iTunes for Windows updates.
For downloading issues see the further information area and use a different browser and/or the direct links.
tt2 -
Syncronizing my 3gs with itunes the sync does not finish because itunes always crash and stuck and i can not sync my device, i dont no whats wrong because the itunes even can not acess itunes store, still loading waiting for itunes store and nothing.I tryed reinstall itunes but just waste of time.
My itunes is update, iphone 3gs 4.3.4, system is windows vista home premium.
Please help me.I also have the Mcaffe security centre so on the face of it we have very similar situations and I had not problems.
You asked what I meant about saving the installer on your PC.
When you go to the iTunes download page:
http://www.apple.com/itunes/download/
And click on download, you should be offered the choice of running the installer or saving it. You need to click on save and then choose a folder on you PC where you want it saved. But I think you already did that.
After the installer file - iTunessetup.exe - is save on your computer, you double click on it to run it.
It's very odd that the installer fails at different stages. usually when the installation fails, it is at a specific stage and usually generates an error message.
I am afraid I am mystified. Have you had any other problems with your PC which might suggest a general problem not specific to iTunes?
The only other suggestion I have is to download a fresh copy of the installer - in case it got corrupted. You could also try using "run as administrator" to run the installer. It should be an option if you right click on the installer file.
The other thing it might be worth trying is to install it from another account, but you would need to create another administrator account if you don't a;ready have one. Or if you have another account that is not an admin account, you can temporarily promote it from the control panel>>User accounts. -
Windows Vista Home Premium (SP2) - Update Error Code 80071AA7: Unable to install KB3033889
I am having problems updating my Windows Vista Home Premium (SP2) with KB3033889
I am always getting the Update error Code 80071AA7
I have tried a clean boot, to install Microsoft Update Standalone Package (KB3033889), but does not worked.
I tried Sfc /scannow, and "Could not repair corrupted file", and i have checked "CBS.log" file:
POQ 93 ends.
2015-03-19 02:18:46, Info CSI 000001dc [SR] Verify complete
2015-03-19 02:18:46, Info CSI 000001dd [SR] Repairing 1 components
2015-03-19 02:18:46, Info CSI 000001de [SR] Beginning Verify and Repair transaction
2015-03-19 02:18:46, Info CSI 000001df Hashes for file member \SystemRoot\WinSxS\x86_microsoft-windows-sidebar_31bf3856ad364e35_6.0.6002.18005_none_d0c824c923c9e622\settings.ini
do not match actual file [l:24{12}]"settings.ini" :
Found: {l:32 b:ceS/bmgz5Fkqs00J27mkzYn/b2SuD9mJsx/R1y3hPqA=} Expected: {l:32 b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o=}
2015-03-19 02:18:46, Info CSI 000001e0 [SR] Cannot repair member file [l:24{12}]"settings.ini" of Microsoft-Windows-Sidebar, Version
= 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
After that i have checked "WindowsUpdate.log" file:
2015-03-18 22:12:23:584 1264 db0 Handler WARNING: Got extended error: "POQ Operation HardLinkFile OperationData
\SystemRoot\WinSxS\x86_microsoft-windows-t..icesframework-msctf_31bf3856ad364e35_6.0.6002.19296_none_774ec727ec2f0da4\msctf.dll, \??\C:\Windows\System32\msctf.dll"
I am out of ideas.
Can some one please help me?
What can i do?
Thank you.See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Problems with screen resolution after reinstalling Windows 7 Home Premium
Product Name: HP Pavilion dv6 Notebook PC
Product Number: A6X94UA#ABA
BIOS: F.1C
Processor: Intel Core i7-2670QM
Graphics Device: Intel HD Graphics Family
I recently had to wipe my laptop and reinstall Windows 7 Home Premium (created restore disk from Windows). Ever since, I have not been able to adjust my display settings any higher than 1024x768. My only other option on the adjustment range is 800x600. I have updated BIOS (it was already at latest version) and I have searched for updated drivers (system says most recent ones are in use), but I cannot get it to provide me with a more appropriate size selection for my screen; I have to scroll back and forth in Internet Explorer, for example, to see a full screen because it doesn't fit correctly on my laptop screen.
It seems like this should be an easy fix, but I can't seem to find the right trick. Can anyone help?
TIA,
Teri@buzymom2 ,
Hello and thank you for posting on the HP support forums. The only thing I would try at this point is to go to this link and download the software and drivers for your notebook.
HP Pavilion dv6-6c53cl Entertainment Notebook PC Drivers
Once you have them downloaded save them to a USB memory stick or burn them to a CD or DVD.
Now you will want to boot into safe mode.
Entering Safe Mode (Windows 7)
Now in safe mode uninstall all your drivers by going into the device manager.
Uninstall or Reinstall a Device
Once you have the drivers removed, reboot into windows in normal mode. Now install your drivers one at a time you have to start with the chipset driver. If you install the drivers without the chipset first it can cause all kinds of problems.
Let me know how things go.
Thank you so much for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP -
Cannot update my iTunes to 10.4.1 on my Windows 7 Home Premium 64bit machine
Cannot update my iTunes to 10.4.1 on my Windows 7 Home Premium 64bit machine. Why? It seems like I am not the only one with this problem. Is there a solution? I have tried to download separately without any success.
Hallo Lucas,
I found a solution for my problem.
Follow the instructions on how to remove iTunes as descripted in the link I posted before (a english version is available).
Additionally I had to remove every appearance of Apple and Apple Computer software from
c:\users\YourUserName\AppData
Reboot, reinstall latest iTunes and it worked again.
I hope this helps.
8-) Armin -
Windows 7 home premium wont update
We had windows vista removed from our laptop and replaced with windows 7 home premium, this was done at our local computer shop. I now realise that a month later it has never updated and no matter what i do it still wont update. it comes up with
error message 80070246. Any ideas. Many thanksUnfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription. This is a standard response I’ve written up in advance to help many people (thousands, really.)
who post their question in this forum in error, but please don’t ignore it. The links I share below I’ve collected to help you get right where you need to go with your issue.
For technical issues with Microsoft products that you would run into as an
end user of those products, one great source of info and help is
http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
For Technical issues with Microsoft products that you might have as an
IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
http://social.technet.microsoft.com/forums/en-us, and search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
http://community.dynamics.com/
If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize! Please repost your question to the discussion forum and include much more detail about your problem, that could include screenshots
of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing.
If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have a forum just for you! It’s called the Where is the forum for…? forum and it’s here:
http://social.msdn.microsoft.com/forums/en-us/whatforum/
Moving to off topic.
Thanks, Mike
MSDN and TechNet Subscriptions Support -
Problem on Windows 7 Home Premium cant open program for using codes like visual studio 2012
I have problem my windows 7 Home Premium because of visual studio 2012..I can't open even in several times, I don't know what happen, and sometime it is so low to process whenksn it to open my laptop..Why is that pleas do reply..ASAP! tha
Hi,
According to your description, it seems like VS itself problem, you can try to repair this program through Control Panel for test. If no use, it would be better to post your question at VS forum for further assistance.
Contact VS forum:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=visualstudio%2Cvsarch%2Cvsdbg%2Cvstest%2Cvstfs%2Cvsdata%2Cvsappdev%2Cvisualbasic%2Cvisualcsharp%2Cvisualc
Roger Lu
TechNet Community Support
Maybe you are looking for
-
Getting an error message in B2B and it says Invalid Delimiter Settings.
Hi, We are in the process of integrating an outbound data flow using BPEL and B2B.. We have the bpel process deployed in the system which is integrated to the B2B via a partner link. The payload from the Bpel process is coming into the B2B but the ou
-
Oil view in the material master
Dear SAP Guru, in our project, we share same material type with oil view activated for other Non-HPM Product. i have not maintained oil view data of material master for Non-HPM Material. But if you select oil view, the other field like UoM group ,
-
After recently publishing and setting up a random password for a new iphoto Web gallery, I'm noticing that regardless of the password I assign to this gallery, the viewer ( or myself when testing it) still needed to enter my actual .mac password in o
-
Takes up to 20 times to connect to Firefox and then Crashes up to 20 times in yahoo email a day.
I have been in dialog with "Just Answer" the past two weeks 60 times over this issue. This has been an issue for several months. Just today I tried 18 times "Sever not Found" "Try again" before accessing Firefox. Yesterday Firefox crashed in Yahoo em
-
What would cause a subvi to show its FP even when it is set not to show (default setting)?
I have a subvi that suddenly decided to show itself even when instructed not to. What kinds of things would cause this? Thanks! Bill (Mid-Level minion.) My support system ensures that I don't look totally incompetent. Proud to say that I've progress