Windows 7 home taskbar crashes after installing adobe reader

windows 7 home version, taskbar crashes after installing adobe reader

The link to the Reader forum is at the top of this forum.

Similar Messages

  • After installing Adobe Reader XI 11.0.09 on my Windows 7 x64 operating system it will not print pdf documents

    After installing Adobe Reader XI 11.0.09 on my Windows 7 x64 operating system, I attempted to print and existing pdf document to my Brothers MFC-J4510DW printer I received error message indicating that no pages where selected (I selected print all pages).

    Hi satsugyo1,
    For printing both sides, you might also need to enable 'printing on both sides' option in Reader print dialog box.
    Please do the same and then print your PDF.
    Let me know how it goes.
    Regards,
    Anubha

  • Printing problem after installing Adobe Reader XI.

    After installing Adobe Reader XI. I can not just print a document from email attachment without saving it to a "save the file as". Where before was able to just print the document. There is no reason I need to save these documents being printed. How do I get back to an older version that allowed me to do this?

    Thanks for your response. I found the problem 1/2hr after posting my question. It had to do with the setting after hitting the print que. After installing the Adobe Reader XI the setting for destination in the print window change to save as PDF. Before it was set to my default printer. I never knew that there was other places for these documents could go. Never had to use them either.
    Again thanks for responding.

  • After installing Adobe Reader 8.1.2 system restarts and freezes

    After installing Adobe Reader 8.1.2 system restarts and freezes (hangs, locks up)
    I have Windows XP SP2, plenty of spare disk space and Adobe Reader 8.1.1.
    The 8.1.2 Reader appeared to install OK and asked for the system to be restarted. When I accepted this it shut down and rebooted as expected,
    but just before it was fully restarted it froze and I could do nothing.
    I pressed the power switch and tried again but the same thing happened again.
    To get back to a usable system I had to boot in safe mode and go back to a restore point.
    I don't know if this is relevent but it stopped just before Nortom firewall usually starts.
    I am keen to install the new version because of the security fixes.
    Can anyone help?
    Thanks in anticipation

    The link to the Reader forum is at the top of this forum.

  • PDF Reader add-on fails to load in IE10 after installing Adobe Reader 11

    PDF Reader add-on fails to load in IE10 after installing Adobe Reader 11 (PDF Reader does'nt appear in the list of IE 10 installed add-ons)
    So IE10 fails to load PDF files
    Thanks for your help

    For more information, please see this link: http://www.adobe.com/devnet-docs/acrobatetk/tools/ReleaseNotes/index.html#enterprise-updat es
    ~Deepak

  • How do I look at pdf files after installing adobe reader?

    how do I look at pdf files after installing adobe reader?

    Start Adobe Reader
    Use the menu File > Open...
    Select the PDF file

  • After install Adobe Reader all my files are switched to Adobe files.  After uninstalling Adobe Reader all is back to normal.  Can you help?  Thanks

    After installing Adobe Reader all my files are switched to Adobe files.  After uninstalling Adobe Reader all is back to normal.  Can you help?  Thanks.

    You may find this useful:  http://helpx.adobe.com/acrobat/kb/application-file-icons-change-acrobat.html

  • Dr Watson Postmortem Debugger message after installing Adobe Reader 9

    After I installed 'Adobe Reader 9' I was greeted with a 'Dr Watson Postmortem debugger' message so then I uninstalled Adobe and haven't had the dr.watson message since. What can I do as lots of sites require Adobe Reader such as 'youtube'. Can anyone help me?

    Reader Forum http://www.adobeforums.com/webx?13@@.3bbf42f7

  • I cannot print pdf files after installing adobe reader

    I have installed adobe reader for Mac OS x. It shows it is installed but when I try printing a pdf file it won't print and it says I need to install it. What can I do?

    Please provide the full and exact message you are getting.

  • No respond on my Win7 64bit ver. after install Adobe Reader

    HI,
    I've installed adobe reader X recently.
    For the 1st time I tried to open a PDF file, below message pop up:--
    I want to select "Accept" but I am not able to kick any button ("Accept", "Reject", "Print", "Save") inside the pop up message.
    I want to close the PDF file but cannot do it as well. Finally I need to close it by Ctrl+Alt+Del "Task manager".
    I have uninstalled the Adobe reader X  & install it again but same problem happened again.
    Please help

    I suggest you to read this page: http://kb2.adobe.com/cps/404/kb404960.html .  Alessio Ganci

  • Trouble Viewing 3D PDF with Windows XP  after installing Adobe Reader X

    Hi,
    I have updated my Adobe Reader X last week ( April 2012 ) and since then I am having trouble viewing 3D PDF on my web browser, both IE 8 and Firefox. I am using Windows XP.
    The warning message I got are shown as follow:
    "Some features have been disabled to avoid potential security risks. Only enable these features if you trust this host: (and the hosting website of the 3D PDF goes here)"
    Adobe Reader X will allow me to view the 3D model when I select "Trust this host one time only", but it does nothing if I choose to "Trust this host always".
    Any help will be greatly appreciated.
    Thank you.
    Peter H.

    Hi Ankit,
    Here is an example: http://www.catalogds.com/db/service?domain=newport&command=showProduct&category=root&produ ct=sl51bm
    Just click on the "View 3D Model" button and it will bring up another window/tab with a 3D PDF.
    I will try changing the setting in the Trust Manager panel when my Windows XP computer is available later today.
    Thank you.
    Peter

  • IE crashing after installing Adobe Flash ActiveX 10

    Asus Notebook
    Intel (R) Core (TM) i5 CPU M 450 @ 2.40GHz 2.40 GHz
    4.00 GB
    64-Bit Operating System
    IE 9.0
    Windows 7
    IP Address 71.188.169.54
    Hi-
    I hope i provided all requested system info, if not, please LMK.  Out of the blue, my computer stated that I did not Adobe Flash installed when trying to watch a TV show on Hulu.  Never had the problem before.  So, I installed the "required" download Adobe ActiveX 10.  Rebooted after installing.  IE immediatly began crashing on every site that Flash was required.  I uninstalled/installed at least 10 times...same problem.  I looked at different discussions and the first thing I see going wrong for me is that I don't have a Macromed folder under my System.
    Currently, I have uninstalled the program just so I can send this thread; otherwise it would be constantly giving me error messages.
    Help?
    (I'm no techy)
    Thanks!

    Hi, You are missing a Flash file and the fact that you don't find that SWO in the addons means that for some reason FP wasn't Installed correctly.
    On the edit feature, once someone replies to your message, it is voided. I'll see what I can do, but it may not be removed for a couple of days. Also, I need to mention that when you receive an email notification that someone has replied to your thread, don't use your email to respond. Page down in the message & use "visit the message page". This will take you directly to the message.
    Replying via your email will post your email address on this public forum:-) In addition any links that are given to you to use, don't use the links from the email notification. Come directly to the Forum thread and use them from there.
    In my next message I'll give you Uninstall/Install directions that you can use.
    Thanks,
    eidnolb

  • After installing Adobe Reader 9.1.3, PDF document referenced in an IFRAME won't display

    My company writes software that generates PDF files and then displays them in either a FRAME or IFRAME.  For one of our customers, for the users that have Adobe Reader 9.1.3 installed, if we programatically set the src of an IFRAME to a PDF, the content of the IFRAME just stays blank.  But if they browse elsewhere from within our software and try loading the exact same PDF document in a FRAME, it loads fine.  Our customer's users that are experiencing the problem are running on Windows XP SP3 using Internet Explorer 7 with Adobe Reader 9.1.3.
    I've installed 9.1.3 on my Windows Server 2003 developer machine and I do not experience the problem.  I had the customer send me screen shots of all of the IE settings in the Advanced tab and for the appropriate zone in the Security tab.  I changed all of my settings to match and still could not replicate the problem.
    I'm not sure what else to have the customer try.  Any suggestions would be greatly appreciated.

    In case anyone else runs into this problem, I wanted to make sure that the solution got posted.  When comparing all of the Advanced Settings and Security Settings, one thing was missed.  Our customer was accessing the site using https while in our attempt to duplicate the problem, we were not.  The setting that was causing the problem was the Advanced Setting of "Do not save encrypted pages to disk".  If that is checked while browsing to a site using https, the described issue results.

  • Slow Startup after installing Adobe Reader X and 9.4

    Okay, I've been using Reader 9 since before i can remember, without any problems!  Now, after I install Reader X or 9.4, my computer will take about 5 minutes to startup.  After startup I have no problems with programs or performance.  What's wrong?  Alternatively, does anyone know where I can get Adobe Reader 9?

    btw to get other versions http://get.adobe.com/reader/otherversions/

  • HT2506 Questions about Preview Using in Safari after Installing Adobe Reader

    I wonder how could I reuse Preview to open PDFs on Safari, after I installed the **** stupid Adobe Reader. Now I can't read and download online PDFs just because I got the Adobe Reader, even if I uninstalled the Adobe reader. What should I do?!!!!

    I've been having this same problem with saving pdf files File - Save As from the top Toolbar on my laptop.
    I would constantly get messages - There was an error opening this document. The file is damaged and could not be repaired.
    I also downloaded the lateset version of Adobe Reader XI
    But at last I have managed to find a simple way to access pdf files from the internet.
    Firstly, without downloading the pdf, I printed the pdf file direct from the Safari page by using the Print icon on the grey lozenge that appears centrally three quarters down the screen.
    Then I discovered that if I save the pdf using the Save icon from this same grey lozenge on the Safari page I can open and print this pdf version from my desktop.
    I've tested it with a couple of different pdf files and these methods work using the grey lozenge icons but the same pdfs files don't work using File - Save As on the Tool Bar.

Maybe you are looking for

  • MobileMe Gallery not syncing

    I have been trying for the last couple of days to upload a couple of new MobilMe Galleries to my account. The first 4 galleries worked fine, then a few days later I cannot get anything to publish. Aperture appears to be making progress as the "clock"

  • File is huge when combined or changed to PDF, how do I get the file to a normal size to print?

    Files are to large to print once they are PDF, how do I get them to a normal 8x11 size to print?

  • Run-Time errors using DAQmx and Borland C++ Builder 5.0

    I've written a simple program on MS Visual C++ 6.0 to test my PCI-6014 board and it works fine. I copied the code to Borland C++ builder 5.0 and had some linker problems with the .lib files that where solved with borland's "coff2omf". Now I've been g

  • Using FB 4.7 Premium cannot run unit tests

    I have a licensed version of 4.7 Premium but cannot run unit tests. The message I get says "This feature requires a Flash Builder Premium License". I have uninstalled Fb 4.7 and then downloaded and reinstalled. Still the same issue. I have verified I

  • Running really slow

    Mac OS X 10.6.8 and photoshop cs5.  It's running horribly slow.  Did OS updates according to what we could from the MAC updates, and updated Photoshop from adobe.  Any ideas