Windows 7 , hp c4280 and a logitech usb hub problem

i have a hp c4280 printer (it is an all in one printer with copier and scanner)
he works fine on the usb port but if i want to connect the printer tru a usb hub like this http://www.onlineshop.com.sg/index.php?main_page=product_info&products_id=4764&zenid=41926e11ee1272dbb86567a0915bef4a
the scanner of the printer dosen"t work
if i want to print something it works only if i wand to scan something i get the folow error 
http://i26.tinypic.com/99dkep.jpg

Hi,
you may try skipping the system check and check if that may bypass the problem,
When the System Requirements Check window appears, click on the Cancel button while holding the Ctrl+Shift keys. This will bypass the sys. req. check and continue the installation. You may need to do this several times for the installation to proceed.
If that doesn't help I would recomemnd ensuring that you have the latest USB drivers for your PC, please clarify your PC model and I would try pointing you further as possible.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • PPC Update 10.4.7 and USB hub problems

    Hi,
    After installing the PPC 10.4.7 combo update on my PowerPC G5 dual 2.7 GHz (4GB RAM) I have problems with my USB hub. The update seemed to have been installed properly (two reboots and no error messages) but since then my Kensington track ball does no longer work after power on. I have to detach and reattach the USB hub to reactivate the trackball. The problem does not occur after a restart (only after a power off/on cycle).
    The USB hub did work before the update and I did not change the configuration after the update.
    I hope someone can help me with this as it is very frustrating for me to crawl under my desk to detach and reattach the USB hub every time I turn on my mac...
    Thanks for any help!

    Hi,
    After installing the PPC 10.4.7 combo update on my
    PowerPC G5 dual 2.7 GHz (4GB RAM) I have problems
    with my USB hub. The update seemed to have been
    installed properly (two reboots and no error
    messages) but since then my Kensington track ball
    does no longer work after power on. I have to detach
    and reattach the USB hub to reactivate the trackball.
    The problem does not occur after a restart (only
    after a power off/on cycle).
    The USB hub did work before the update and I did not
    change the configuration after the update.
    I hope someone can help me with this as it is very
    frustrating for me to crawl under my desk to detach
    and reattach the USB hub every time I turn on my
    mac...
    Thanks for any help!
    I can't help you, but I wanted to say that I have a similar problem. After a sleep/wake, my hub doesn't wake up. I have done a bunch of troubleshooting, including buying a new hub, which did not solve the problem (I took it back). When I reboot, all is back to normal. I have a 2001 Powermac G4 with a Sonnet Allegro USB 2.0 card that I added, over a year ago. It has worked fine since I bought it. Now, after upgrading to OS 10.4.7, I have this sleep/wake problem with the USB hub (Keyspan).
    I have checked the ports on the USB card and I have found that at least one port is dead when I wake the machine back up. I can switch over devices around and they work in the remaining three ports on the board. The hub, however, does not work at all in any port, until after a reboot. There must be some special signal that the board sends out to the hub that resets it after a boot. I don't know. It's very frustrating, though. I don't like waiting for a reboot, which is why I have gotten in the habit of using sleep.
    Maybe someone else has some idea what might be causing this problem? It could be just a coincidence that it started soon after the OS update. Maybe the board just decided to go bad at this particular time...?
    Rich
    PowerMac G4 2001 Quicksilver   Mac OS X (10.4.7)   Sonnet Allegro USB 2.0, Sonnet Encore ST G4 Duet, ATI Radeon 9000 Pro

  • Airport Extreme and adding a USB Hub

    I added a Belkin USB Hub to my airport extreme and with my MAC computer it cannot find anything plugged into it.  Is there a recommended Hub to use, mine is Belkin?

    Welcome to Apple Support Communities
    A USB port of the AirPort Extreme supports a hub, always that you plug printers and displays > http://support.apple.com/kb/HT2421
    If devices connected to the hub are not recognized, return it and get another hub. There is no hub recommended as all of them should work, but I recommend you to get a USB 2.0 hub

  • WRT54GS and Belkin Network USB Hub

    My Linksys router works fine. I'm hard wired in with a desktop computer. I have a Belkin Network USB Hub that will not work with the router. The router appears to be blocking the USB hub. If I plug the hub directly into my computer, then it will work. I have reset the router to factory setting and I still cannot see the hub. I can not find anyone that has problems with installation of the hub. How can I use the hub with my router?

    The Hub I refer to connects to a router. The USB hub does not expand the number of USB devices I can use on my single computer. The hub is used to share USB devices across the network. I would like to share my printer, scanner, and external hard drive with all my computers in my house. The hub uses an Ethernet cord to connect to the router. My issue is the hub does not work when I connect it directly to the router. If I connect the hub to my computer with an Ethernet cable, then the connected USB devices show up in the loaded Belkin software (and work fine). Once I connect the hub to the router through an Ethernet cable, the computers on the network can not see any of the USB devices. This is why I assume the router is "blocking" the the network USB device. Everyone says how easy the hub is to setup. Just plug it in. I must be missing something. Belkin tech support said to contact my router support.

  • Time Machine and 4 Port USB Hub

    I am trying to use a 1Tb external drive with Time Machine. I have connected the external drive via a 4 port, externally powered USB hub. The hub is then connected to my Airport Extreme.
    The problem is the drive will not mount using the hub. Yet, when I plug the drive directly into my MacBook Pro, it shows up just fine in Disk Utilities, and Time Machine wants to know if I would like to use it as a backup disk.
    I'd really like to use this drive wirelessly to back up multiple Macs via my Airport Extreme. The odd thing is that I have a printer connected to the same hub and I share it using the Airport Extreme and it works just fine. I just don't understand why the hub is making a difference.
    - Do I need a different hub?
    - Are hubs a problem with this kind of set up?
    And I'd like to sneak in a follow-up question if I may:
    - Can I use the same hard drive with Time Machine to back up 2 or 3 Macs?
    Thanks in advance!

    My thanks to you and Tesserax for the quick and helpful responses! You were right about the 1Tb drive not being supported wirelessly through my Airport Extreme. The drive showed up under "disk" in Time Machines preferences, but the drive would not mount. The minute I put the printer directly into the Extreme and connected the drive to the MacBook Pro via the hub, it showed up in Disk Utilities and was ready to format. And, now Time Machine is asking me if I want to use it as my Backup Disk. Cool! Now the only question is if I can share the disk so that my other Macs can also take advantage of this new Backup Disk. We'll see..
    Thanks again so much!!

  • Install 10.6.4 and keyboard on USB Hub

    I successfully installed the 10.6.4 through software update. After the reboot the screen went to blue and stayed there. I pushed the power button (but slipped and pulsed it) and put the iMac to sleep instead of powering down. I pushed it again and the mac came back now with the login screen saying no keyboard was found and it was trying to find a bluetooth keyboard.
    My keyboard has been connected through a powered usb hub for several months (multiple reboots and different OSX 10.6 versions). If I connect the keyboard directly to the mac it works fine.
    I later unplugged the keyboard and put it back into the usb hub (after being logged in and up and running for while). After a few minutes the keyboard went missing again.

    But it was working fine just before the 10.6.4 install. (For months, maybe even years).
    I'll try a different hub and see if it makes any difference though, thanks for the suggestion.

  • Apple Keyboard USB HUB problem.

    Hi, I bought this keyboard recently ( http://store.apple.com/us/product/MB...co=MTA4Mzc4ODA ), it has 2 USB ports on the side. In 1st I plugged the mouse and the other I plugged this speakers ( http://www.logitech.com/index.cfm/no...200&cl=roeu,en ). The problem is that when I'm in Windows 7 it says the hub has not energy enough to connect the devices, and the speakers do not work. Now when I'm on Mac OSX the mouse and the speakers work perfectly. Does anyone have an explanation for that?
    Sorry about my english, and thank you.

    well, im an idiot. disregard almost everything i just said.
    Macs use EHCI/OHCI. The issue is with windows recognizing everything as low speed usb.
    EHCI handles high speed usb
    OHCI handles low speed usb
    Windows is passing everything off to the ohci controllers whether or not they're high speed or not.
    I'd still like a smarter windows usb driver, apple.

  • USB Hub problem?

    Hi,
    I have a USB hub, 7ports / USB 2.0/1.1 powered by a mains adaptor.
    I am connecting 1 x USB 3 external drive 750 GB (partitioned into two sections) and 1 x USB 2 500 GB external drive. I use these for mixture of storage and backup, and exchange data between them.
    Both drives work perfectly well when I connect one at a time (the USB 3 is always connected at startup) but when I insert the USB 2 device into the hub, the first devive (USB 3 partitioned) disconnects and I get the standard warning " disc was not ejected properly" etc. etc.
    (I know the MacBook has 2 x USB inserts, but one is connected permanently to an audio capture device - non negotiable)!
    Would this be because the hub is not suitable for USB 3 devices, or some other reason. Any advice would be greatly appreciated!
    Many Thanks............Brian

    btw_2010 wrote:
    Both drives work perfectly well when I connect one at a time (the USB 3 is always connected at startup) but when I insert the USB 2 device into the hub, the first devive (USB 3 partitioned) disconnects
    My suspicion is that the hub doesn't provide enough power for both drives. Check the specs (power or current consumption) for the drives and the hub. Keep in mind that, often enough, especially on cheaper hubs, the power supply ratings are wildly optimistic. Eg, the power supply may be rated for 1A, but effectively delivers only 0.8A; if each drive needs 0.5A, connecting both at the same time won't work.

  • External HD + Airport Extreme + USB Hub = Problems

    I'm having issues connecting my 2 external HDs to my airport extreme via USB Hub. I have a My Book 1TB HD and a 500G Maxtor OneTouch that I connected to a powered usb hub that is plugged into my Airport Extreme. It works for a minute, I can connect wirelessly to both, then it hangs up and fails to mount. When I disconnected it all and plug one of the two into the Airport Extreme, it works flawlessly. I want to use the 1TB for all my goodies and the 500G for my Time Machine Backups.
    I guess my questions are these:
    1. Is the USB Hub not supplying enough power or could it be that the USB Hub just cannot handle two HDs. (Its a rocketfish powered usb hub btw)
    2. What four port powered usb hub would you recommed me using to connect the 1TB and 500G external HDs to my Airport Extreme?
    Thank you in advance!

    I am having a smiler issue i have a 1TB WD hard Drive plugged into the USB hub on my Airport Extreme. When it mounts it works great...I use it to access all of my music. The problem is it gets disconnected constantly and when it does it also takes out my Airport Express. I have to unplug the Extreme to reset it all.
    Any help would be appreciated!!

  • I cannot watch any TV shows on Itunes. The episode will play for a few seconds and then freeze and skip forward randomly. I have a Windows 7 PC and I didn't have problems before the Itunes 11 update. Any ideas?

    After updating to ITunes 11 a while back, I am no longer able to watch TV shows on my laptop. If I try to watch an episode, it freezes and then skips forward randomly. I have a Windows 7 laptop and I didn't have any problems before ITunes 11.

    I don't use a graphics card, I use on board graphics as my computer case is too small to fit a graphics card inside.
    There are no effects applied to the clip, only one layer of video and 1 layer of audio (both from the same file). The video is in MP4 format at 720p.
    Before I rendered the sequence, I had a yellow bar above the sequence. Also, I imported the same clip into CC Standard and it played fine (also had a yellow bar) with no lag.
    I think I've fixed the issue now as rendering the sequence made the video play smoothly with no apparent issues.
    If any other clips have lag or any other problems in CC 2014, I'll just import them into CC standard and see if that works.

  • Obscure Nano and Mini XP USB Driver Problem Finally Solved

    I had a rather obscure USB driver registry problem that few others would probably have, but this might be helpful.
    I was unable to get Windows XP SP2 Media Center Edition to properly recognize either my iPod Mini or Nano 3rd generation. The iPods would be seen by XP in Device Manager (would show Apple iPod USB Driver) when connected, but would immediately disconnect. The Apple iPod USB Driver properties would then show “This device cannot start (Code 10).”
    I first tried all the Apple-recommended fixes: the five Rs; reinstalling the Apple iPod USB driver; disconnecting all other USB devices; switching USB plug-in points; putting the iPod into Drive Mode; and all the other things shown in the troubleshooting guide “iPod shows up in Windows but not in iTunes,” http://docs.info.apple.com/article.html?artnum=93716
    None of the above worked. And on occasion after uninstalling and reinstalling the iPod USB driver, I would get a blue screen with the error message “driverirql_not_less_orequal,” sometimes followed by stop codes and something called “USBPORT.SYS.”
    Apple phone support was unable to help, claiming that XP Media Center Edition was not supported, though the problem appeared to have no relation to MCE versus Home or Pro.
    Then I finally stumbled onto the solution. I previously had installed a USB drive encryption program (NTINinja) on my computer. Although I had uninstalled the program months earlier, it had left a registry entry which was interfering with the iPods. When I deleted the registry entry, the problem was solved.
    Those of you having similar recognition problems as described above might check Control Panel, System, Hardware, Device Manager, Universal Serial Bus Controllers, USB Root Hub, Properties, Details, then select Class Lower Filters in the drop-down box. If there is an entry, that might be the problem.
    To get rid of the entry, first write down what it is. Then go to Start, Run, Regedit. Backup the registry (File, Export). Then go to Edit, Find, and type in the suspect entry. It should find the registry key containing the entry in HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\.
    Right click on the LowerFilters key and select Modify. Then delete the suspect entry. Close the registry editor. You might have to reboot – can’t remember.
    I can’t guarantee the above is completely accurate, but it may help someone.

    OK now! Dag, I was going crazy. I had two brand new Raptors and was trying to hook them up in a RAID 0 config. I am no dummy. It would hang at detecting arrays. I could not figure it out for the life of me. I will not talk about all of the combos that I tried. My buddy told me to try datalifeguard from WD. I did. Well, one HD showed no serial number in the extended test. An error message popped up. Said the drive was not working. So, Newegg sends me a dead drive and wastes days and days out of my life. I hooked up the one good drive just now. What do I see? For the first time in my life, I am seeing the raid bios! This almost cost me a divorce. Seriously though, the wife would come in and rub my shoulders like a fighter after a few hours of getting my azz whipped by this new rig. I am now going to make the floppy with the newer drivers like was done here. Just incase. I am in Raid bios now in the other room. Time to go set up XP on one drive for now. I refuse to wait for the RMA'ed second Raptor.

  • Logitech usb keyboard problem

    Since I updated from tiger I have a weird problem....
    Suddenly my USB cordless keyboard (Logitech cordless desktop ex ex 110) changed a few keys by it's own it's not very annoying but I usually use them.
    The given keys are < for º, and my keyboard layout is spanish (ISO) but I have the very same problem if I switch it to spanish or even english.....
    Another fact is that this problem doesn't happen at all if i use my macbook integrated keyboard
    Any Ideas? ^^

    Since there are no Mac drivers for this keyboard/mouse, it's no surprise that it works differently under 10.5 than it did under 10.4. You might be able to change the key functions using the keyboard pane of sys prefs.

  • 4-pin and 6-pin USB cable- problems

    Hi guys,
    my original 6-pin Apple USB cable has often been used and thats what it looked like. So I bought a non-Apple USB cable. I noticed, that it has only 4-pins and it doesnt work with my 3G. The strange thing is, that it works great/as good as the Apple one on his 3G. I know that you`ll probably sugest buying a real Apple one, but they were to expensive for me.
    Regards

    Here checkout these Thunderbolt to Firewire adapters.
    http://store.apple.com/us/browse/home/shop_mac/mac_accessories/cables
    and these...
    thunderbolt to firewire

  • Pple 24" LED and Mac Pro usb connection problem

    Hi,
    I'm having issues with my Mac Pro 8 core (2008) connected to an Apple 24" LED. I have a Radeon HD 4870 graphics card installed in the Mac so I can use the Apple LED  mini displayport connection. The video works perfectly fine but to use the built-in speakers and iSight in the Apple LED I have to use the USB cables and connect them to the USB sockets of the Mac Pro. This is where the problem seems to be as after a time using the Mac it crashes in a strange manner and I get a few lines of coding and the Mac shuts down on its own. I've used Dr Botts extension cables to extend to reach of the USB cables which I thought maybe the issues and taken this off and I've also unplugged any devices plugged into the extra USB sockets on the Apple LED. I think it's something to do with using the speakers as playing video seems to crash the Mac also but once I unplug the USB cables the video plays fine, but without speaker sound. Has anyone had similar problems and have any solutions?
    Thanks in advance.
    Alec

    I have had no problem at all.
    Assume  you have considered: http://support.apple.com/kb/TS2400
    If you have concerns about possible extension cable reliablity, you might want to consider trying a spare such as this one that is available from the Store: http://store.apple.com/us/product/H6730LL/A/
    Mac Pro Quad Core (Early09) 2.93Ghz OSX 10.7.2   24" LED Cinema Display

  • Mac mini Intel Core Duo and HK Soundsticks USB, Any Problem???

    Hello everyone.
    I am thinking of "transferring" my "old" HK Soundsticks USB for my sis's new Mac mini Intel Core Duo.
    Is there any issue or problem with the mac detecting the USB speakers?? I thought I read somewhere here a while back that generally the Intel Macs might have a problem detecting the USB speakers.
    Thanks and cheers.

    Hi NewMoses, thanks for replying but you have to be specific, if you just bought your Soundsticks, it is most likely the HK Soundsticks II, is yours?? which has a normal audio jack, unlike the 1st Soundsticks, which has a USB input.
    I am sure the Soundsticks II with the audio jack would have not much problem on the new Intel Macs, since they are what I considered a "physical audio input", unlike the USB, which involves the USB technology, where more complication may come into play.
    Thanks and cheers

Maybe you are looking for